Commit 34218e06 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

Merge branch 'work-fixes'

parents dece6960 67264484
......@@ -381,6 +381,23 @@ bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *
EXPORT_SYMBOL(bt878_device_control);
struct cards card_list[] __devinitdata = {
{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
{ 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
{ 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
{ 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
{ 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
{ 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
{ 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
{ 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
{ 0, -1, NULL }
};
/***********************/
/* PCI device handling */
/***********************/
......@@ -388,18 +405,41 @@ EXPORT_SYMBOL(bt878_device_control);
static int __devinit bt878_probe(struct pci_dev *dev,
const struct pci_device_id *pci_id)
{
int result;
int result = 0, has_dvb = 0, i;
unsigned char lat;
struct bt878 *bt;
#if defined(__powerpc__)
unsigned int cmd;
#endif
unsigned int cardid;
unsigned short id;
struct cards *dvb_cards;
printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
bt878_num);
if (pci_enable_device(dev))
return -EIO;
pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &id);
cardid = id << 16;
pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &id);
cardid |= id;
for (i = 0, dvb_cards = card_list; i < ARRAY_SIZE(card_list); i++, dvb_cards++) {
if (cardid == dvb_cards->pci_id) {
printk("%s: card id=[0x%x],[ %s ] has DVB functions.\n",
__func__, cardid, dvb_cards->name);
has_dvb = 1;
}
}
if (!has_dvb) {
printk("%s: card id=[0x%x], Unknown card.\nExiting..\n", __func__, cardid);
result = -EINVAL;
goto fail0;
}
bt = &bt878[bt878_num];
bt->dev = dev;
bt->nr = bt878_num;
......@@ -416,6 +456,8 @@ static int __devinit bt878_probe(struct pci_dev *dev,
pci_read_config_byte(dev, PCI_CLASS_REVISION, &bt->revision);
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
bt878_num, bt->id, bt->revision, dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
......
......@@ -88,6 +88,23 @@
#define BT878_RISC_SYNC_MASK (1 << 15)
#define BTTV_BOARD_UNKNOWN 0x00
#define BTTV_BOARD_PINNACLESAT 0x5e
#define BTTV_BOARD_NEBULA_DIGITV 0x68
#define BTTV_BOARD_PC_HDTV 0x70
#define BTTV_BOARD_TWINHAN_DST 0x71
#define BTTV_BOARD_AVDVBT_771 0x7b
#define BTTV_BOARD_AVDVBT_761 0x7c
#define BTTV_BOARD_DVICO_DVBT_LITE 0x80
#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87
struct cards {
__u32 pci_id;
__u16 card_id;
char *name;
};
extern int bt878_num;
struct bt878 {
......
......@@ -83,12 +83,18 @@ config DVB_USB_UMT_010
Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
config DVB_USB_CXUSB
tristate "Medion MD95700 hybrid USB2.0 (Conexant) support"
tristate "Conexant USB2.0 hybrid reference design support"
depends on DVB_USB
select DVB_CX22702
select DVB_LGDT330X
select DVB_MT352
help
Say Y here to support the Medion MD95700 hybrid USB2.0 device. Currently
only the DVB-T part is supported.
Say Y here to support the Conexant USB2.0 hybrid reference design.
Currently, only DVB and ATSC modes are supported, analog mode
shall be added in the future. Devices that require this module:
Medion MD95700 hybrid USB2.0 device.
DViCO FusionHDTV (Bluebird) USB2.0 devices
config DVB_USB_DIGITV
tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
......
......@@ -234,7 +234,7 @@ static struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
{
static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x38 };
static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 };
static u8 reset [] = { RESET, 0x80 };
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 };
......@@ -255,7 +255,7 @@ static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
static int cxusb_mt352_demod_init(struct dvb_frontend* fe)
{ /* used in both lgz201 and th7579 */
static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x39 };
static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x29 };
static u8 reset [] = { RESET, 0x80 };
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
static u8 agc_cfg [] = { AGC_TARGET, 0x24, 0x20 };
......
......@@ -175,11 +175,13 @@ static int digitv_probe(struct usb_interface *intf,
if ((ret = dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE,&d)) == 0) {
u8 b[4] = { 0 };
b[0] = 1;
digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
if (d != NULL) { /* do that only when the firmware is loaded */
b[0] = 1;
digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
b[0] = 0;
digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
b[0] = 0;
digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
}
}
return ret;
}
......@@ -194,7 +196,7 @@ static struct dvb_usb_properties digitv_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-digitv-01.fw",
.firmware = "dvb-usb-digitv-02.fw",
.size_of_priv = 0,
......@@ -229,6 +231,7 @@ static struct dvb_usb_properties digitv_properties = {
{ &digitv_table[0], NULL },
{ NULL },
},
{ NULL },
}
};
......
......@@ -23,10 +23,11 @@
struct vp7045_fe_state {
struct dvb_frontend fe;
struct dvb_frontend_ops ops;
struct dvb_usb_device *d;
};
static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
{
struct vp7045_fe_state *state = fe->demodulator_priv;
......@@ -150,7 +151,8 @@ struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d)
goto error;
s->d = d;
s->fe.ops = &vp7045_fe_ops;
memcpy(&s->ops, &vp7045_fe_ops, sizeof(struct dvb_frontend_ops));
s->fe.ops = &s->ops;
s->fe.demodulator_priv = s;
goto success;
......
......@@ -28,12 +28,6 @@ config DVB_TDA8083
help
A DVB-S tuner module. Say Y when you want to support this frontend.
config DVB_TDA80XX
tristate "Philips TDA8044 or TDA8083 based"
depends on DVB_CORE
help
A DVB-S tuner module. Say Y when you want to support this frontend.
config DVB_MT312
tristate "Zarlink MT312 based"
depends on DVB_CORE
......@@ -139,12 +133,6 @@ config DVB_DIB3000MC
comment "DVB-C (cable) frontends"
depends on DVB_CORE
config DVB_ATMEL_AT76C651
tristate "Atmel AT76C651 based"
depends on DVB_CORE
help
A DVB-C tuner module. Say Y when you want to support this frontend.
config DVB_VES1820
tristate "VLSI VES1820 based"
depends on DVB_CORE
......
......@@ -8,7 +8,6 @@ obj-$(CONFIG_DVB_CORE) += dvb-pll.o
obj-$(CONFIG_DVB_STV0299) += stv0299.o
obj-$(CONFIG_DVB_SP8870) += sp8870.o
obj-$(CONFIG_DVB_CX22700) += cx22700.o
obj-$(CONFIG_DVB_ATMEL_AT76C651) += at76c651.o
obj-$(CONFIG_DVB_CX24110) += cx24110.o
obj-$(CONFIG_DVB_TDA8083) += tda8083.o
obj-$(CONFIG_DVB_L64781) += l64781.o
......@@ -22,7 +21,6 @@ obj-$(CONFIG_DVB_SP887X) += sp887x.o
obj-$(CONFIG_DVB_NXT6000) += nxt6000.o
obj-$(CONFIG_DVB_MT352) += mt352.o
obj-$(CONFIG_DVB_CX22702) += cx22702.o
obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o
obj-$(CONFIG_DVB_TDA10021) += tda10021.o
obj-$(CONFIG_DVB_STV0297) += stv0297.o
obj-$(CONFIG_DVB_NXT200X) += nxt200x.o
......
This diff is collapsed.
/*
* at76c651.c
*
* Atmel DVB-C Frontend Driver (at76c651)
*
* Copyright (C) 2001 fnbrd <fnbrd@gmx.de>
* & 2002-2004 Andreas Oberritter <obi@linuxtv.org>
* & 2003 Wolfram Joost <dbox2@frokaschwei.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* AT76C651
* http://www.nalanda.nitc.ac.in/industry/datasheets/atmel/acrobat/doc1293.pdf
* http://www.atmel.com/atmel/acrobat/doc1320.pdf
*/
#ifndef AT76C651_H
#define AT76C651_H
#include <linux/dvb/frontend.h>
struct at76c651_config
{
/* the demodulator's i2c address */
u8 demod_address;
/* PLL maintenance */
int (*pll_init)(struct dvb_frontend* fe);
int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
};
extern struct dvb_frontend* at76c651_attach(const struct at76c651_config* config,
struct i2c_adapter* i2c);
#endif // AT76C651_H
This diff is collapsed.
/*
* tda80xx.c
*
* Philips TDA8044 / TDA8083 QPSK demodulator driver
*
* Copyright (C) 2001 Felix Domke <tmbinc@elitedvb.net>
* Copyright (C) 2002-2004 Andreas Oberritter <obi@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef TDA80XX_H
#define TDA80XX_H
#include <linux/dvb/frontend.h>
struct tda80xx_config
{
/* the demodulator's i2c address */
u8 demod_address;
/* IRQ to use (0=>no IRQ used) */
u32 irq;
/* Register setting to use for 13v */
u8 volt13setting;
/* Register setting to use for 18v */
u8 volt18setting;
/* PLL maintenance */
int (*pll_init)(struct dvb_frontend* fe);
int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
};
extern struct dvb_frontend* tda80xx_attach(const struct tda80xx_config* config,
struct i2c_adapter* i2c);
#endif // TDA80XX_H
......@@ -2329,6 +2329,17 @@ static int frontend_init(struct av7110 *av7110)
av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
break;
case 0x0004: // Galaxis DVB-S rev1.3
/* ALPS BSRV2 */
av7110->fe = ves1x93_attach(&alps_bsrv2_config, &av7110->i2c_adap);
if (av7110->fe) {
av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst;
av7110->fe->ops->set_tone = av7110_set_tone;
av7110->recover = dvb_s_recover;
}
break;
case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */
/* Grundig 29504-451 */
av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
......@@ -2930,6 +2941,7 @@ MAKE_AV7110_INFO(tts_1_3se, "Technotrend/Hauppauge WinTV DVB-S rev1.3 SE");
MAKE_AV7110_INFO(ttt, "Technotrend/Hauppauge DVB-T");
MAKE_AV7110_INFO(fsc, "Fujitsu Siemens DVB-C");
MAKE_AV7110_INFO(fss, "Fujitsu Siemens DVB-S rev1.6");
MAKE_AV7110_INFO(gxs_1_3, "Galaxis DVB-S rev1.3");
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000),
......@@ -2937,13 +2949,13 @@ static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(ttt_1_X, 0x13c2, 0x0001),
MAKE_EXTENSION_PCI(ttc_2_X, 0x13c2, 0x0002),
MAKE_EXTENSION_PCI(tts_2_X, 0x13c2, 0x0003),
MAKE_EXTENSION_PCI(gxs_1_3, 0x13c2, 0x0004),
MAKE_EXTENSION_PCI(fss, 0x13c2, 0x0006),
MAKE_EXTENSION_PCI(ttt, 0x13c2, 0x0008),
MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a),
MAKE_EXTENSION_PCI(tts_2_3, 0x13c2, 0x000e),
MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002),
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0004), UNDEFINED CARD */ // Galaxis DVB PC-Sat-Carte
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0009), UNDEFINED CARD */ // TT/Hauppauge WinTV Nexus-CA v????
......
......@@ -214,7 +214,7 @@ const struct bttv_tvnorm bttv_tvnorms[] = {
we can capture, of the first and second field. */
.vbistart = { 7,320 },
},{
.v4l2_id = V4L2_STD_NTSC_M,
.v4l2_id = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
.name = "NTSC",
.Fsc = 28636363,
.swidth = 768,
......
......@@ -220,33 +220,23 @@ static void input_change(struct i2c_client *client)
cx25840_write(client, 0x808, 0xff);
cx25840_write(client, 0x80b, 0x10);
} else if (std & V4L2_STD_NTSC) {
/* NTSC */
if (state->pvr150_workaround) {
/* Certain Hauppauge PVR150 models have a hardware bug
that causes audio to drop out. For these models the
audio standard must be set explicitly.
To be precise: it affects cards with tuner models
85, 99 and 112 (model numbers from tveeprom). */
if (std == V4L2_STD_NTSC_M_JP) {
/* Japan uses EIAJ audio standard */
cx25840_write(client, 0x808, 0x2f);
} else {
/* Others use the BTSC audio standard */
cx25840_write(client, 0x808, 0x1f);
}
/* South Korea uses the A2-M (aka Zweiton M) audio
standard, and should set 0x808 to 0x3f, but I don't
know how to detect this. */
} else if (std == V4L2_STD_NTSC_M_JP) {
/* Certain Hauppauge PVR150 models have a hardware bug
that causes audio to drop out. For these models the
audio standard must be set explicitly.
To be precise: it affects cards with tuner models
85, 99 and 112 (model numbers from tveeprom). */
int hw_fix = state->pvr150_workaround;
if (std == V4L2_STD_NTSC_M_JP) {
/* Japan uses EIAJ audio standard */
cx25840_write(client, 0x808, 0xf7);
cx25840_write(client, 0x808, hw_fix ? 0x2f : 0xf7);
} else if (std == V4L2_STD_NTSC_M_KR) {
/* South Korea uses A2 audio standard */
cx25840_write(client, 0x808, hw_fix ? 0x3f : 0xf8);
} else {
/* Others use the BTSC audio standard */
cx25840_write(client, 0x808, 0xf6);
cx25840_write(client, 0x808, hw_fix ? 0x1f : 0xf6);
}
/* South Korea uses the A2-M (aka Zweiton M) audio standard,
and should set 0x808 to 0xf8, but I don't know how to
detect this. */
cx25840_write(client, 0x80b, 0x00);
}
......@@ -330,17 +320,17 @@ static int set_v4lstd(struct i2c_client *client, v4l2_std_id std)
u8 fmt=0; /* zero is autodetect */
/* First tests should be against specific std */
if (std & V4L2_STD_NTSC_M_JP) {
if (std == V4L2_STD_NTSC_M_JP) {
fmt=0x2;
} else if (std & V4L2_STD_NTSC_443) {
} else if (std == V4L2_STD_NTSC_443) {
fmt=0x3;
} else if (std & V4L2_STD_PAL_M) {
} else if (std == V4L2_STD_PAL_M) {
fmt=0x5;
} else if (std & V4L2_STD_PAL_N) {
} else if (std == V4L2_STD_PAL_N) {
fmt=0x6;
} else if (std & V4L2_STD_PAL_Nc) {
} else if (std == V4L2_STD_PAL_Nc) {
fmt=0x7;
} else if (std & V4L2_STD_PAL_60) {
} else if (std == V4L2_STD_PAL_60) {
fmt=0x8;
} else {
/* Then, test against generic ones */
......@@ -369,7 +359,7 @@ v4l2_std_id cx25840_get_v4lstd(struct i2c_client * client)
}
switch (fmt) {
case 0x1: return V4L2_STD_NTSC_M;
case 0x1: return V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR;
case 0x2: return V4L2_STD_NTSC_M_JP;
case 0x3: return V4L2_STD_NTSC_443;
case 0x4: return V4L2_STD_PAL;
......
......@@ -128,7 +128,7 @@ MODULE_PARM_DESC(debug,"enable debug messages");
* BOARD Specific: Sets audio DMA
*/
int _cx88_start_audio_dma(snd_cx88_card_t *chip)
static int _cx88_start_audio_dma(snd_cx88_card_t *chip)
{
struct cx88_buffer *buf = chip->buf;
struct cx88_core *core=chip->core;
......@@ -173,7 +173,7 @@ int _cx88_start_audio_dma(snd_cx88_card_t *chip)
/*
* BOARD Specific: Resets audio DMA
*/
int _cx88_stop_audio_dma(snd_cx88_card_t *chip)
static int _cx88_stop_audio_dma(snd_cx88_card_t *chip)
{
struct cx88_core *core=chip->core;
dprintk(1, "Stopping audio DMA\n");
......@@ -613,7 +613,7 @@ static snd_kcontrol_new_t snd_cx88_capture_volume = {
* Only boards with eeprom and byte 1 at eeprom=1 have it
*/
struct pci_device_id cx88_audio_pci_tbl[] = {
static struct pci_device_id cx88_audio_pci_tbl[] = {
{0x14f1,0x8801,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
{0x14f1,0x8811,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
{0, }
......
......@@ -787,12 +787,14 @@ static int set_pll(struct cx88_core *core, int prescale, u32 ofreq)
int cx88_start_audio_dma(struct cx88_core *core)
{
/* constant 128 made buzz in analog Nicam-stereo for bigger fifo_size */
int bpl = cx88_sram_channels[SRAM_CH25].fifo_size/4;
/* setup fifo + format */
cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], 128, 0);
cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], 128, 0);
cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], bpl, 0);
cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], bpl, 0);
cx_write(MO_AUDD_LNGTH, 128); /* fifo bpl size */
cx_write(MO_AUDR_LNGTH, 128); /* fifo bpl size */
cx_write(MO_AUDD_LNGTH, bpl); /* fifo bpl size */
cx_write(MO_AUDR_LNGTH, bpl); /* fifo bpl size */
/* start dma */
cx_write(MO_AUD_DMACNTRL, 0x0003); /* Up and Down fifo enable */
......
......@@ -482,6 +482,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
switch (core->board) {
case CX88_BOARD_DNTV_LIVE_DVB_T:
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_KWORLD_DVB_T_CX22702:
ir_codes = ir_codes_dntv_live_dvb_t;
ir->gpio_addr = MO_GP1_IO;
ir->mask_keycode = 0x1f;
......
......@@ -139,6 +139,9 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
{
int ret, byte;
if (dev->state & DEV_DISCONNECTED)
return(-ENODEV);
em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
......@@ -165,6 +168,9 @@ int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg)
u8 val;
int ret;
if (dev->state & DEV_DISCONNECTED)
return(-ENODEV);
em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
......@@ -195,7 +201,12 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
int ret;
/*usb_control_msg seems to expect a kmalloced buffer */
unsigned char *bufs = kmalloc(len, GFP_KERNEL);
unsigned char *bufs;
if (dev->state & DEV_DISCONNECTED)
return(-ENODEV);
bufs = kmalloc(len, GFP_KERNEL);
em28xx_regdbg("req=%02x reg=%02x:", req, reg);
......@@ -212,7 +223,7 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, reg, bufs, len, HZ);
mdelay(5); /* FIXME: magic number */
msleep(5); /* FIXME: magic number */
kfree(bufs);
return ret;
}
......
......@@ -78,7 +78,7 @@ static int em2800_i2c_send_max4(struct em28xx *dev, unsigned char addr,
ret = dev->em28xx_read_reg(dev, 0x05);
if (ret == 0x80 + len - 1)
return len;
mdelay(5);
msleep(5);
}
em28xx_warn("i2c write timed out\n");
return -EIO;
......@@ -138,7 +138,7 @@ static int em2800_i2c_check_for_device(struct em28xx *dev, unsigned char addr)
return -ENODEV;
else if (msg == 0x84)
return 0;
mdelay(5);
msleep(5);
}
return -ENODEV;
}
......@@ -278,9 +278,9 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
msgs[i].buf,
msgs[i].len,
i == num - 1);
if (rc < 0)
goto err;
}
if (rc < 0)
goto err;
if (i2c_debug>=2)
printk("\n");
}
......
......@@ -231,7 +231,7 @@ static struct tvnorm tvnorms[] = {
cAudioIF_6_5 |
cVideoIF_38_90 ),
},{
.std = V4L2_STD_NTSC_M,
.std = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
.name = "NTSC-M",
.b = ( cNegativeFmTV |
cQSS ),
......@@ -619,6 +619,11 @@ static int tda9887_fixup_std(struct tda9887 *t)
tda9887_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
t->std = V4L2_STD_NTSC_M_JP;
break;
case 'k':
case 'K':
tda9887_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
t->std = V4L2_STD_NTSC_M_KR;
break;
case '-':
/* default parameter, do nothing */
break;
......
......@@ -366,6 +366,11 @@ static int tuner_fixup_std(struct tuner *t)
tuner_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
t->std = V4L2_STD_NTSC_M_JP;
break;
case 'k':
case 'K':
tuner_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
t->std = V4L2_STD_NTSC_M_KR;
break;
case '-':
/* default parameter, do nothing */
break;
......
......@@ -896,6 +896,17 @@ static int tvp5150_command(struct i2c_client *c,
}
case DECODER_GET_STATUS:
{
int *iarg = arg;
int status;
int res=0;
status = tvp5150_read(c, 0x88);
if(status&0x08){
res |= DECODER_STATUS_COLOR;
}
if(status&0x04 && status&0x02){
res |= DECODER_STATUS_GOOD;
}
*iarg=res;
break;
}
......
......@@ -629,6 +629,7 @@ typedef __u64 v4l2_std_id;
#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000)
#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000)
#define V4L2_STD_NTSC_443 ((v4l2_std_id)0x00004000)
#define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000)
#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000)
#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000)
......@@ -661,7 +662,8 @@ typedef __u64 v4l2_std_id;
V4L2_STD_PAL_H |\
V4L2_STD_PAL_I)
#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\
V4L2_STD_NTSC_M_JP)
V4L2_STD_NTSC_M_JP |\
V4L2_STD_NTSC_M_KR)
#define V4L2_STD_SECAM_DK (V4L2_STD_SECAM_D |\
V4L2_STD_SECAM_K |\
V4L2_STD_SECAM_K1)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment