Merge branch 'work-fixes'

drivers/media/dvb/bt8xx/bt878.c

@@ -381,6 +381,23 @@ bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *
 
 EXPORT_SYMBOL(bt878_device_control);
 
+
+struct cards card_list[] __devinitdata = {
+
+	{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV,			"Nebula Electronics DigiTV" },
+	{ 0x07611461, BTTV_BOARD_AVDVBT_761,			"AverMedia AverTV DVB-T 761" },
+	{ 0x001c11bd, BTTV_BOARD_PINNACLESAT,			"Pinnacle PCTV Sat" },
+	{ 0x002611bd, BTTV_BOARD_TWINHAN_DST,			"Pinnacle PCTV SAT CI" },
+	{ 0x00011822, BTTV_BOARD_TWINHAN_DST,			"Twinhan VisionPlus DVB" },
+	{ 0xfc00270f, BTTV_BOARD_TWINHAN_DST,			"ChainTech digitop DST-1000 DVB-S" },
+	{ 0x07711461, BTTV_BOARD_AVDVBT_771,			"AVermedia AverTV DVB-T 771" },
+	{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,		"DViCO FusionHDTV DVB-T Lite" },
+	{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,	"DViCO FusionHDTV 5 Lite" },
+	{ 0x20007063, BTTV_BOARD_PC_HDTV,			"pcHDTV HD-2000 TV"},
+	{ 0, -1, NULL }
+};
+
+
 /***********************/
 /* PCI device handling */
 /***********************/
@@ -388,18 +405,41 @@ EXPORT_SYMBOL(bt878_device_control);
 static int __devinit bt878_probe(struct pci_dev *dev,
 				 const struct pci_device_id *pci_id)
 {
-	int result;
+	int result = 0, has_dvb = 0, i;
 	unsigned char lat;
 	struct bt878 *bt;
 #if defined(__powerpc__)
 	unsigned int cmd;
 #endif
+	unsigned int cardid;
+	unsigned short id;
+	struct cards *dvb_cards;
 
 	printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
 	       bt878_num);
 	if (pci_enable_device(dev))
 		return -EIO;
 
+	pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &id);
+	cardid = id << 16;
+	pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &id);
+	cardid |= id;
+
+	for (i = 0, dvb_cards = card_list; i < ARRAY_SIZE(card_list); i++, dvb_cards++) {
+		if (cardid == dvb_cards->pci_id) {
+			printk("%s: card id=[0x%x],[ %s ] has DVB functions.\n",
+				__func__, cardid, dvb_cards->name);
+			has_dvb = 1;
+		}
+	}
+
+	if (!has_dvb) {
+		printk("%s: card id=[0x%x], Unknown card.\nExiting..\n", __func__, cardid);
+		result = -EINVAL;
+
+		goto fail0;
+	}
+
 	bt = &bt878[bt878_num];
 	bt->dev = dev;
 	bt->nr = bt878_num;
@@ -416,6 +456,8 @@ static int __devinit bt878_probe(struct pci_dev *dev,
 
 	pci_read_config_byte(dev, PCI_CLASS_REVISION, &bt->revision);
 	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+
+
 	printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
 	       bt878_num, bt->id, bt->revision, dev->bus->number,
 	       PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));

drivers/media/dvb/bt8xx/bt878.h

@@ -88,6 +88,23 @@
 
 #define BT878_RISC_SYNC_MASK	(1 << 15)
 
+
+#define BTTV_BOARD_UNKNOWN                 0x00
+#define BTTV_BOARD_PINNACLESAT             0x5e
+#define BTTV_BOARD_NEBULA_DIGITV           0x68
+#define BTTV_BOARD_PC_HDTV                 0x70
+#define BTTV_BOARD_TWINHAN_DST             0x71
+#define BTTV_BOARD_AVDVBT_771              0x7b
+#define BTTV_BOARD_AVDVBT_761              0x7c
+#define BTTV_BOARD_DVICO_DVBT_LITE         0x80
+#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87
+
+struct cards {
+	__u32 pci_id;
+	__u16 card_id;
+	char  *name;
+};
+
 extern int bt878_num;
 
 struct bt878 {

drivers/media/dvb/dvb-usb/Kconfig

@@ -83,12 +83,18 @@ config DVB_USB_UMT_010
 	  Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
 
 config DVB_USB_CXUSB
-	tristate "Medion MD95700 hybrid USB2.0 (Conexant) support"
+	tristate "Conexant USB2.0 hybrid reference design support"
 	depends on DVB_USB
 	select DVB_CX22702
+	select DVB_LGDT330X
+	select DVB_MT352
 	help
-	  Say Y here to support the Medion MD95700 hybrid USB2.0 device. Currently
-	  only the DVB-T part is supported.
+	  Say Y here to support the Conexant USB2.0 hybrid reference design.
+	  Currently, only DVB and ATSC modes are supported, analog mode
+	  shall be added in the future. Devices that require this module:
+
+	  Medion MD95700 hybrid USB2.0 device.
+	  DViCO FusionHDTV (Bluebird) USB2.0 devices
 
 config DVB_USB_DIGITV
 	tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"

drivers/media/dvb/dvb-usb/cxusb.c

@@ -234,7 +234,7 @@ static struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
 
 static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
 {
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x38 };
+	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 };
 	static u8 reset []         = { RESET,      0x80 };
 	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
 	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 };
@@ -255,7 +255,7 @@ static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
 
 static int cxusb_mt352_demod_init(struct dvb_frontend* fe)
 {	/* used in both lgz201 and th7579 */
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x39 };
+	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x29 };
 	static u8 reset []         = { RESET,      0x80 };
 	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
 	static u8 agc_cfg []       = { AGC_TARGET, 0x24, 0x20 };

drivers/media/dvb/dvb-usb/digitv.c

@@ -175,11 +175,13 @@ static int digitv_probe(struct usb_interface *intf,
 	if ((ret = dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE,&d)) == 0) {
 		u8 b[4] = { 0 };
 
-		b[0] = 1;
-		digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
+		if (d != NULL) { /* do that only when the firmware is loaded */
+			b[0] = 1;
+			digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
 
-		b[0] = 0;
-		digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+			b[0] = 0;
+			digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+		}
 	}
 	return ret;
 }
@@ -194,7 +196,7 @@ static struct dvb_usb_properties digitv_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 
 	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-digitv-01.fw",
+	.firmware = "dvb-usb-digitv-02.fw",
 
 	.size_of_priv     = 0,
 
@@ -229,6 +231,7 @@ static struct dvb_usb_properties digitv_properties = {
 			{ &digitv_table[0], NULL },
 			{ NULL },
 		},
+		{ NULL },
 	}
 };
 

drivers/media/dvb/dvb-usb/vp7045-fe.c

@@ -23,10 +23,11 @@
 
 struct vp7045_fe_state {
 	struct dvb_frontend fe;
+	struct dvb_frontend_ops ops;
+
 	struct dvb_usb_device *d;
 };
 
-
 static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
 {
 	struct vp7045_fe_state *state = fe->demodulator_priv;
@@ -150,7 +151,8 @@ struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d)
 		goto error;
 
 	s->d = d;
-	s->fe.ops = &vp7045_fe_ops;
+	memcpy(&s->ops, &vp7045_fe_ops, sizeof(struct dvb_frontend_ops));
+	s->fe.ops = &s->ops;
 	s->fe.demodulator_priv = s;
 
 	goto success;

drivers/media/dvb/frontends/Kconfig

@@ -28,12 +28,6 @@ config DVB_TDA8083
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
-config DVB_TDA80XX
-	tristate "Philips TDA8044 or TDA8083 based"
-	depends on DVB_CORE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
 config DVB_MT312
 	tristate "Zarlink MT312 based"
 	depends on DVB_CORE
@@ -139,12 +133,6 @@ config DVB_DIB3000MC
 comment "DVB-C (cable) frontends"
 	depends on DVB_CORE
 
-config DVB_ATMEL_AT76C651
-	tristate "Atmel AT76C651 based"
-	depends on DVB_CORE
-	help
-	  A DVB-C tuner module. Say Y when you want to support this frontend.
-
 config DVB_VES1820
 	tristate "VLSI VES1820 based"
 	depends on DVB_CORE

drivers/media/dvb/frontends/Makefile

@@ -8,7 +8,6 @@ obj-$(CONFIG_DVB_CORE) += dvb-pll.o
 obj-$(CONFIG_DVB_STV0299) += stv0299.o
 obj-$(CONFIG_DVB_SP8870) += sp8870.o
 obj-$(CONFIG_DVB_CX22700) += cx22700.o
-obj-$(CONFIG_DVB_ATMEL_AT76C651) += at76c651.o
 obj-$(CONFIG_DVB_CX24110) += cx24110.o
 obj-$(CONFIG_DVB_TDA8083) += tda8083.o
 obj-$(CONFIG_DVB_L64781) += l64781.o
@@ -22,7 +21,6 @@ obj-$(CONFIG_DVB_SP887X) += sp887x.o
 obj-$(CONFIG_DVB_NXT6000) += nxt6000.o
 obj-$(CONFIG_DVB_MT352) += mt352.o
 obj-$(CONFIG_DVB_CX22702) += cx22702.o
-obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o
 obj-$(CONFIG_DVB_TDA10021) += tda10021.o
 obj-$(CONFIG_DVB_STV0297) += stv0297.o
 obj-$(CONFIG_DVB_NXT200X) += nxt200x.o

drivers/media/dvb/frontends/at76c651.h

-/*
- * at76c651.c
- *
- * Atmel DVB-C Frontend Driver (at76c651)
- *
- * Copyright (C) 2001 fnbrd <fnbrd@gmx.de>
- *             & 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- *             & 2003 Wolfram Joost <dbox2@frokaschwei.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * AT76C651
- * http://www.nalanda.nitc.ac.in/industry/datasheets/atmel/acrobat/doc1293.pdf
- * http://www.atmel.com/atmel/acrobat/doc1320.pdf
- */
-
-#ifndef AT76C651_H
-#define AT76C651_H
-
-#include <linux/dvb/frontend.h>
-
-struct at76c651_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* PLL maintenance */
-	int (*pll_init)(struct dvb_frontend* fe);
-	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
-};
-
-extern struct dvb_frontend* at76c651_attach(const struct at76c651_config* config,
-					    struct i2c_adapter* i2c);
-
-#endif // AT76C651_H

drivers/media/dvb/frontends/tda80xx.h

-/*
- * tda80xx.c
- *
- * Philips TDA8044 / TDA8083 QPSK demodulator driver
- *
- * Copyright (C) 2001 Felix Domke <tmbinc@elitedvb.net>
- * Copyright (C) 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef TDA80XX_H
-#define TDA80XX_H
-
-#include <linux/dvb/frontend.h>
-
-struct tda80xx_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* IRQ to use (0=>no IRQ used) */
-	u32 irq;
-
-	/* Register setting to use for 13v */
-	u8 volt13setting;
-
-	/* Register setting to use for 18v */
-	u8 volt18setting;
-
-	/* PLL maintenance */
-	int (*pll_init)(struct dvb_frontend* fe);
-	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
-};
-
-extern struct dvb_frontend* tda80xx_attach(const struct tda80xx_config* config,
-					   struct i2c_adapter* i2c);
-
-#endif // TDA80XX_H

drivers/media/dvb/ttpci/av7110.c

@@ -2329,6 +2329,17 @@ static int frontend_init(struct av7110 *av7110)
 			av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
 			break;
 
+		case 0x0004: // Galaxis DVB-S rev1.3
+			/* ALPS BSRV2 */
+			av7110->fe = ves1x93_attach(&alps_bsrv2_config, &av7110->i2c_adap);
+			if (av7110->fe) {
+				av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
+				av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst;
+				av7110->fe->ops->set_tone = av7110_set_tone;
+				av7110->recover = dvb_s_recover;
+			}
+			break;
+
 		case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */
 			/* Grundig 29504-451 */
 			av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
@@ -2930,6 +2941,7 @@ MAKE_AV7110_INFO(tts_1_3se,  "Technotrend/Hauppauge WinTV DVB-S rev1.3 SE");
 MAKE_AV7110_INFO(ttt,        "Technotrend/Hauppauge DVB-T");
 MAKE_AV7110_INFO(fsc,        "Fujitsu Siemens DVB-C");
 MAKE_AV7110_INFO(fss,        "Fujitsu Siemens DVB-S rev1.6");
+MAKE_AV7110_INFO(gxs_1_3,    "Galaxis DVB-S rev1.3");
 
 static struct pci_device_id pci_tbl[] = {
 	MAKE_EXTENSION_PCI(fsc,         0x110a, 0x0000),
@@ -2937,13 +2949,13 @@ static struct pci_device_id pci_tbl[] = {
 	MAKE_EXTENSION_PCI(ttt_1_X,     0x13c2, 0x0001),
 	MAKE_EXTENSION_PCI(ttc_2_X,     0x13c2, 0x0002),
 	MAKE_EXTENSION_PCI(tts_2_X,     0x13c2, 0x0003),
+	MAKE_EXTENSION_PCI(gxs_1_3,     0x13c2, 0x0004),
 	MAKE_EXTENSION_PCI(fss,         0x13c2, 0x0006),
 	MAKE_EXTENSION_PCI(ttt,         0x13c2, 0x0008),
 	MAKE_EXTENSION_PCI(ttc_1_X,     0x13c2, 0x000a),
 	MAKE_EXTENSION_PCI(tts_2_3,     0x13c2, 0x000e),
 	MAKE_EXTENSION_PCI(tts_1_3se,   0x13c2, 0x1002),
 
-/*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0004), UNDEFINED CARD */ // Galaxis DVB PC-Sat-Carte
 /*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1
 /*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0009), UNDEFINED CARD */ // TT/Hauppauge WinTV Nexus-CA v????
 

drivers/media/video/bttv-driver.c

@@ -214,7 +214,7 @@ const struct bttv_tvnorm bttv_tvnorms[] = {
 		   we can capture, of the first and second field. */
 		.vbistart	= { 7,320 },
 	},{
-		.v4l2_id        = V4L2_STD_NTSC_M,
+		.v4l2_id        = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
 		.name           = "NTSC",
 		.Fsc            = 28636363,
 		.swidth         = 768,

drivers/media/video/cx25840/cx25840-core.c

@@ -220,33 +220,23 @@ static void input_change(struct i2c_client *client)
 		cx25840_write(client, 0x808, 0xff);
 		cx25840_write(client, 0x80b, 0x10);
 	} else if (std & V4L2_STD_NTSC) {
-		/* NTSC */
-		if (state->pvr150_workaround) {
-			/* Certain Hauppauge PVR150 models have a hardware bug
-			   that causes audio to drop out. For these models the
-			   audio standard must be set explicitly.
-			   To be precise: it affects cards with tuner models
-			   85, 99 and 112 (model numbers from tveeprom). */
-			if (std == V4L2_STD_NTSC_M_JP) {
-				/* Japan uses EIAJ audio standard */
-				cx25840_write(client, 0x808, 0x2f);
-			} else {
-				/* Others use the BTSC audio standard */
-				cx25840_write(client, 0x808, 0x1f);
-			}
-			/* South Korea uses the A2-M (aka Zweiton M) audio
-			   standard, and should set 0x808 to 0x3f, but I don't
-			   know how to detect this. */
-		} else if (std == V4L2_STD_NTSC_M_JP) {
+		/* Certain Hauppauge PVR150 models have a hardware bug
+		   that causes audio to drop out. For these models the
+		   audio standard must be set explicitly.
+		   To be precise: it affects cards with tuner models
+		   85, 99 and 112 (model numbers from tveeprom). */
+		int hw_fix = state->pvr150_workaround;
+
+		if (std == V4L2_STD_NTSC_M_JP) {
 			/* Japan uses EIAJ audio standard */
-			cx25840_write(client, 0x808, 0xf7);
+			cx25840_write(client, 0x808, hw_fix ? 0x2f : 0xf7);
+		} else if (std == V4L2_STD_NTSC_M_KR) {
+			/* South Korea uses A2 audio standard */
+			cx25840_write(client, 0x808, hw_fix ? 0x3f : 0xf8);
 		} else {
 			/* Others use the BTSC audio standard */
-			cx25840_write(client, 0x808, 0xf6);
+			cx25840_write(client, 0x808, hw_fix ? 0x1f : 0xf6);
 		}
-		/* South Korea uses the A2-M (aka Zweiton M) audio standard,
-		   and should set 0x808 to 0xf8, but I don't know how to
-		   detect this. */
 		cx25840_write(client, 0x80b, 0x00);
 	}
 
@@ -330,17 +320,17 @@ static int set_v4lstd(struct i2c_client *client, v4l2_std_id std)
 	u8 fmt=0; 	/* zero is autodetect */
 
 	/* First tests should be against specific std */
-	if (std & V4L2_STD_NTSC_M_JP) {
+	if (std == V4L2_STD_NTSC_M_JP) {
 		fmt=0x2;
-	} else if (std & V4L2_STD_NTSC_443) {
+	} else if (std == V4L2_STD_NTSC_443) {
 		fmt=0x3;
-	} else if (std & V4L2_STD_PAL_M) {
+	} else if (std == V4L2_STD_PAL_M) {
 		fmt=0x5;
-	} else if (std & V4L2_STD_PAL_N) {
+	} else if (std == V4L2_STD_PAL_N) {
 		fmt=0x6;
-	} else if (std & V4L2_STD_PAL_Nc) {
+	} else if (std == V4L2_STD_PAL_Nc) {
 		fmt=0x7;
-	} else if (std & V4L2_STD_PAL_60) {
+	} else if (std == V4L2_STD_PAL_60) {
 		fmt=0x8;
 	} else {
 		/* Then, test against generic ones */
@@ -369,7 +359,7 @@ v4l2_std_id cx25840_get_v4lstd(struct i2c_client * client)
 	}
 
 	switch (fmt) {
-	case 0x1: return V4L2_STD_NTSC_M;
+	case 0x1: return V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR;
 	case 0x2: return V4L2_STD_NTSC_M_JP;
 	case 0x3: return V4L2_STD_NTSC_443;
 	case 0x4: return V4L2_STD_PAL;

drivers/media/video/cx88/cx88-alsa.c

@@ -128,7 +128,7 @@ MODULE_PARM_DESC(debug,"enable debug messages");
  * BOARD Specific: Sets audio DMA
  */
 
-int _cx88_start_audio_dma(snd_cx88_card_t *chip)
+static int _cx88_start_audio_dma(snd_cx88_card_t *chip)
 {
 	struct cx88_buffer   *buf = chip->buf;
 	struct cx88_core *core=chip->core;
@@ -173,7 +173,7 @@ int _cx88_start_audio_dma(snd_cx88_card_t *chip)
 /*
  * BOARD Specific: Resets audio DMA
  */
-int _cx88_stop_audio_dma(snd_cx88_card_t *chip)
+static int _cx88_stop_audio_dma(snd_cx88_card_t *chip)
 {
 	struct cx88_core *core=chip->core;
 	dprintk(1, "Stopping audio DMA\n");
@@ -613,7 +613,7 @@ static snd_kcontrol_new_t snd_cx88_capture_volume = {
  * Only boards with eeprom and byte 1 at eeprom=1 have it
  */
 
-struct pci_device_id cx88_audio_pci_tbl[] = {
+static struct pci_device_id cx88_audio_pci_tbl[] = {
 	{0x14f1,0x8801,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0x14f1,0x8811,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0, }

drivers/media/video/cx88/cx88-core.c

@@ -787,12 +787,14 @@ static int set_pll(struct cx88_core *core, int prescale, u32 ofreq)
 
 int cx88_start_audio_dma(struct cx88_core *core)
 {
+	/* constant 128 made buzz in analog Nicam-stereo for bigger fifo_size */
+	int bpl = cx88_sram_channels[SRAM_CH25].fifo_size/4;
 	/* setup fifo + format */
-	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], 128, 0);
-	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], 128, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], bpl, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], bpl, 0);
 
-	cx_write(MO_AUDD_LNGTH,    128); /* fifo bpl size */
-	cx_write(MO_AUDR_LNGTH,    128); /* fifo bpl size */
+	cx_write(MO_AUDD_LNGTH, bpl); /* fifo bpl size */
+	cx_write(MO_AUDR_LNGTH, bpl); /* fifo bpl size */
 
 	/* start dma */
 	cx_write(MO_AUD_DMACNTRL, 0x0003); /* Up and Down fifo enable */

drivers/media/video/cx88/cx88-input.c

@@ -482,6 +482,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	switch (core->board) {
 	case CX88_BOARD_DNTV_LIVE_DVB_T:
 	case CX88_BOARD_KWORLD_DVB_T:
+	case CX88_BOARD_KWORLD_DVB_T_CX22702:
 		ir_codes = ir_codes_dntv_live_dvb_t;
 		ir->gpio_addr = MO_GP1_IO;
 		ir->mask_keycode = 0x1f;

drivers/media/video/em28xx/em28xx-core.c

@@ -139,6 +139,9 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
 {
 	int ret, byte;
 
+	if (dev->state & DEV_DISCONNECTED)
+		return(-ENODEV);
+
 	em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
 
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
@@ -165,6 +168,9 @@ int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg)
 	u8 val;
 	int ret;
 
+	if (dev->state & DEV_DISCONNECTED)
+		return(-ENODEV);
+
 	em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
 
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
@@ -195,7 +201,12 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 	int ret;
 
 	/*usb_control_msg seems to expect a kmalloced buffer */
-	unsigned char *bufs = kmalloc(len, GFP_KERNEL);
+	unsigned char *bufs;
+
+	if (dev->state & DEV_DISCONNECTED)
+		return(-ENODEV);
+
+	bufs = kmalloc(len, GFP_KERNEL);
 
 	em28xx_regdbg("req=%02x reg=%02x:", req, reg);
 
@@ -212,7 +223,7 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			      0x0000, reg, bufs, len, HZ);
-	mdelay(5);		/* FIXME: magic number */
+	msleep(5);		/* FIXME: magic number */
 	kfree(bufs);
 	return ret;
 }

drivers/media/video/em28xx/em28xx-i2c.c

@@ -78,7 +78,7 @@ static int em2800_i2c_send_max4(struct em28xx *dev, unsigned char addr,
 		ret = dev->em28xx_read_reg(dev, 0x05);
 		if (ret == 0x80 + len - 1)
 			return len;
-		mdelay(5);
+		msleep(5);
 	}
 	em28xx_warn("i2c write timed out\n");
 	return -EIO;
@@ -138,7 +138,7 @@ static int em2800_i2c_check_for_device(struct em28xx *dev, unsigned char addr)
 			return -ENODEV;
 		else if (msg == 0x84)
 			return 0;
-		mdelay(5);
+		msleep(5);
 	}
 	return -ENODEV;
 }
@@ -278,9 +278,9 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
 							   msgs[i].buf,
 							   msgs[i].len,
 							   i == num - 1);
-			if (rc < 0)
-				goto err;
 		}
+		if (rc < 0)
+			goto err;
 		if (i2c_debug>=2)
 			printk("\n");
 	}

drivers/media/video/tda9887.c

@@ -231,7 +231,7 @@ static struct tvnorm tvnorms[] = {
 			   cAudioIF_6_5   |
 			   cVideoIF_38_90 ),
 	},{
-		.std   = V4L2_STD_NTSC_M,
+		.std   = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
 		.name  = "NTSC-M",
 		.b     = ( cNegativeFmTV  |
 			   cQSS           ),
@@ -619,6 +619,11 @@ static int tda9887_fixup_std(struct tda9887 *t)
 			tda9887_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
 			t->std = V4L2_STD_NTSC_M_JP;
 			break;
+		case 'k':
+		case 'K':
+			tda9887_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
+			t->std = V4L2_STD_NTSC_M_KR;
+			break;
 		case '-':
 			/* default parameter, do nothing */
 			break;

drivers/media/video/tuner-core.c

@@ -366,6 +366,11 @@ static int tuner_fixup_std(struct tuner *t)
 			tuner_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
 			t->std = V4L2_STD_NTSC_M_JP;
 			break;
+		case 'k':
+		case 'K':
+			tuner_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
+			t->std = V4L2_STD_NTSC_M_KR;
+			break;
 		case '-':
 			/* default parameter, do nothing */
 			break;

drivers/media/video/tvp5150.c

@@ -896,6 +896,17 @@ static int tvp5150_command(struct i2c_client *c,
 		}
 	case DECODER_GET_STATUS:
 		{
+			int *iarg = arg;
+			int status;
+			int res=0;
+			status = tvp5150_read(c, 0x88);
+			if(status&0x08){
+				res |= DECODER_STATUS_COLOR;
+			}
+			if(status&0x04 && status&0x02){
+				res |= DECODER_STATUS_GOOD;
+			}
+			*iarg=res;
 			break;
 		}
 

include/linux/videodev2.h

@@ -629,6 +629,7 @@ typedef __u64 v4l2_std_id;
 #define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)
 #define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)
 #define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
+#define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)
 
 #define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
 #define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
@@ -661,7 +662,8 @@ typedef __u64 v4l2_std_id;
 				 V4L2_STD_PAL_H		|\
 				 V4L2_STD_PAL_I)
 #define V4L2_STD_NTSC           (V4L2_STD_NTSC_M	|\
-				 V4L2_STD_NTSC_M_JP)
+				 V4L2_STD_NTSC_M_JP     |\
+				 V4L2_STD_NTSC_M_KR)
 #define V4L2_STD_SECAM_DK      	(V4L2_STD_SECAM_D	|\
 				 V4L2_STD_SECAM_K	|\
 				 V4L2_STD_SECAM_K1)