Skip to content

L
linux
Commit 345c4296 authored by Stephen Boyd's avatar Stephen Boyd
Browse files
Options

Merge tag 'tegra-for-4.8-clk' of... 

Merge tag 'tegra-for-4.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next

Pull tegra clk driver updates from Thierry Reding:

Fixes and enhancements mostly for Tegra210 clocks that allow DSI and
HDMI to work on Tegra X1. There's also a refactoring, including fixes,
the USB PLL.

* tag 'tegra-for-4.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  clk: tegra: Initialize UTMI PLL when enabling PLLU
  clk: tegra: Micro-optimize Tegra210 clock setup
  clk: tegra: Make sor_safe the parent of dpaux and dpaux1
  clk: tegra: Mark timer clock as critical
  clk: tegra: Enable sor1 and sor1_src on Tegra210
  clk: tegra: Squash sor1 safe/brick/src into a single mux
  clk: tegra: Disable spread spectrum on pll_d2
  clk: tegra: Fixup post dividers on Tegra210
parents e6cbf998 15d68e8c
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 603 additions and 667 deletions
drivers/clk/tegra/clk-id.h
View file @ 345c4296
......@@ -238,7 +238,6 @@ enum clk_id {
tegra_clk_sor0,
tegra_clk_sor0_lvds,
tegra_clk_sor1,
tegra_clk_sor1_brick,
tegra_clk_sor1_src,
tegra_clk_spdif,
tegra_clk_spdif_2x,
......
drivers/clk/tegra/clk-pll.c
View file @ 345c4296
This diff is collapsed.
drivers/clk/tegra/clk-tegra-periph.c
View file @ 345c4296
......@@ -594,15 +594,17 @@ static u32 mux_pllp_plld_plld2_clkm_idx[] = {
[0] = 0, [1] = 2, [2] = 5, [3] = 6
};
static const char *mux_plldp_sor1_src[] = {
"pll_dp", "clk_sor1_src"
};
#define mux_plldp_sor1_src_idx NULL
static const char *mux_clkm_sor1_brick_sor1_src[] = {
"clk_m", "sor1_brick", "sor1_src", "sor1_brick"
};
#define mux_clkm_sor1_brick_sor1_src_idx NULL
static const char *mux_sor_safe_sor1_brick_sor1_src[] = {
/*
* Bit 0 of the mux selects sor1_brick, irrespective of bit 1, so the
* sor1_brick parent appears twice in the list below. This is merely
* to support clk_get_parent() if firmware happened to set these bits
* to 0b11. While not an invalid setting, code should always set the
* bits to 0b01 to select sor1_brick.
*/
"sor_safe", "sor1_brick", "sor1_src", "sor1_brick"
};
#define mux_sor_safe_sor1_brick_sor1_src_idx NULL
static const char *mux_pllp_pllre_clkm[] = {
"pll_p", "pll_re_out1", "clk_m"
......@@ -778,8 +780,7 @@ static struct tegra_periph_init_data periph_clks[] = {
MUX8("nvjpg", mux_pllc2_c_c3_pllp_plla1_clkm, CLK_SOURCE_NVJPG, 195, 0, tegra_clk_nvjpg),
MUX8("ape", mux_plla_pllc4_out0_pllc_pllc4_out1_pllp_pllc4_out2_clkm, CLK_SOURCE_APE, 198, TEGRA_PERIPH_ON_APB, tegra_clk_ape),
MUX8_NOGATE_LOCK("sor1_src", mux_pllp_plld_plld2_clkm, CLK_SOURCE_SOR1, tegra_clk_sor1_src, &sor1_lock),
NODIV("sor1_brick", mux_plldp_sor1_src, CLK_SOURCE_SOR1, 14, MASK(1), 183, 0, tegra_clk_sor1_brick, &sor1_lock),
NODIV("sor1", mux_clkm_sor1_brick_sor1_src, CLK_SOURCE_SOR1, 15, MASK(1), 183, 0, tegra_clk_sor1, &sor1_lock),
NODIV("sor1", mux_sor_safe_sor1_brick_sor1_src, CLK_SOURCE_SOR1, 14, MASK(2), 183, 0, tegra_clk_sor1, &sor1_lock),
MUX8("sdmmc_legacy", mux_pllp_out3_clkm_pllp_pllc4, CLK_SOURCE_SDMMC_LEGACY, 193, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_sdmmc_legacy),
MUX8("qspi", mux_pllp_pllc_pllc_out1_pllc4_out2_pllc4_out1_clkm_pllc4_out0, CLK_SOURCE_QSPI, 211, TEGRA_PERIPH_ON_APB, tegra_clk_qspi),
I2C("vii2c", mux_pllp_pllc_clkm, CLK_SOURCE_VI_I2C, 208, tegra_clk_vi_i2c),
......@@ -791,7 +792,7 @@ static struct tegra_periph_init_data periph_clks[] = {
static struct tegra_periph_init_data gate_clks[] = {
GATE("rtc", "clk_32k", 4, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_rtc, 0),
GATE("timer", "clk_m", 5, 0, tegra_clk_timer, 0),
GATE("timer", "clk_m", 5, 0, tegra_clk_timer, CLK_IS_CRITICAL),
GATE("isp", "clk_m", 23, 0, tegra_clk_isp, 0),
GATE("vcp", "clk_m", 29, 0, tegra_clk_vcp, 0),
GATE("apbdma", "clk_m", 34, 0, tegra_clk_apbdma, 0),
......
drivers/clk/tegra/clk-tegra114.c
View file @ 345c4296
......@@ -113,32 +113,6 @@
#define CCLKG_BURST_POLICY 0x368
#define UTMIP_PLL_CFG2 0x488
#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
#define UTMIP_PLL_CFG1 0x484
#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
#define UTMIPLL_HW_PWRDN_CFG0 0x52c
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
#define CLK_SOURCE_CSITE 0x1d4
#define CLK_SOURCE_EMC 0x19c
......@@ -649,43 +623,6 @@ static unsigned long tegra114_input_freq[] = {
#define MASK(x) (BIT(x) - 1)
struct utmi_clk_param {
/* Oscillator Frequency in KHz */
u32 osc_frequency;
/* UTMIP PLL Enable Delay Count */
u8 enable_delay_count;
/* UTMIP PLL Stable count */
u8 stable_count;
/* UTMIP PLL Active delay count */
u8 active_delay_count;
/* UTMIP PLL Xtal frequency count */
u8 xtal_freq_count;
};
static const struct utmi_clk_param utmi_parameters[] = {
{
.osc_frequency = 13000000, .enable_delay_count = 0x02,
.stable_count = 0x33, .active_delay_count = 0x05,
.xtal_freq_count = 0x7f
}, {
.osc_frequency = 19200000, .enable_delay_count = 0x03,
.stable_count = 0x4b, .active_delay_count = 0x06,
.xtal_freq_count = 0xbb
}, {
.osc_frequency = 12000000, .enable_delay_count = 0x02,
.stable_count = 0x2f, .active_delay_count = 0x04,
.xtal_freq_count = 0x76
}, {
.osc_frequency = 26000000, .enable_delay_count = 0x04,
.stable_count = 0x66, .active_delay_count = 0x09,
.xtal_freq_count = 0xfe
}, {
.osc_frequency = 16800000, .enable_delay_count = 0x03,
.stable_count = 0x41, .active_delay_count = 0x0a,
.xtal_freq_count = 0xa4
},
};
/* peripheral mux definitions */
static const char *mux_plld_out0_plld2_out0[] = {
......@@ -986,92 +923,9 @@ static void __init tegra114_fixed_clk_init(void __iomem *clk_base)
}
static __init void tegra114_utmi_param_configure(void __iomem *clk_base)
{
unsigned int i;
u32 reg;
for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
if (osc_freq == utmi_parameters[i].osc_frequency)
break;
}
if (i >= ARRAY_SIZE(utmi_parameters)) {
pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
osc_freq);
return;
}
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL stable and active counts */
/* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
active_delay_count);
/* Remove power downs from UTMIP PLL control bits */
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL delay and oscillator frequency counts */
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
enable_delay_count);
reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
xtal_freq_count);
/* Remove power downs from UTMIP PLL control bits */
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
/* Setup HW control of UTMIPLL */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
udelay(1);
/* Setup SW override of UTMIPLL assuming USB2.0
ports are assigned to USB2 */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
udelay(1);
/* Enable HW control UTMIPLL */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
}
static void __init tegra114_pll_init(void __iomem *clk_base,
void __iomem *pmc)
{
u32 val;
struct clk *clk;
/* PLLC */
......@@ -1118,16 +972,10 @@ static void __init tegra114_pll_init(void __iomem *clk_base,
CLK_SET_RATE_PARENT, 1, 1);
/* PLLU */
val = readl(clk_base + pll_u_params.base_reg);
val &= ~BIT(24); /* disable PLLU_OVERRIDE */
writel(val, clk_base + pll_u_params.base_reg);
clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
&pll_u_params, &pll_u_lock);
clk = tegra_clk_register_pllu_tegra114("pll_u", "pll_ref", clk_base, 0,
&pll_u_params, &pll_u_lock);
clks[TEGRA114_CLK_PLL_U] = clk;
tegra114_utmi_param_configure(clk_base);
/* PLLU_480M */
clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
......
drivers/clk/tegra/clk-tegra124.c
View file @ 345c4296
......@@ -99,32 +99,6 @@
#define CCLKG_BURST_POLICY 0x368
#define UTMIP_PLL_CFG2 0x488
#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
#define UTMIP_PLL_CFG1 0x484
#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
#define UTMIPLL_HW_PWRDN_CFG0 0x52c
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
/* Tegra CPU clock and reset control regs */
#define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470
......@@ -764,43 +738,6 @@ static struct tegra_clk_pll_params pll_u_params = {
TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
};
struct utmi_clk_param {
/* Oscillator Frequency in KHz */
u32 osc_frequency;
/* UTMIP PLL Enable Delay Count */
u8 enable_delay_count;
/* UTMIP PLL Stable count */
u8 stable_count;
/* UTMIP PLL Active delay count */
u8 active_delay_count;
/* UTMIP PLL Xtal frequency count */
u8 xtal_freq_count;
};
static const struct utmi_clk_param utmi_parameters[] = {
{
.osc_frequency = 13000000, .enable_delay_count = 0x02,
.stable_count = 0x33, .active_delay_count = 0x05,
.xtal_freq_count = 0x7f
}, {
.osc_frequency = 19200000, .enable_delay_count = 0x03,
.stable_count = 0x4b, .active_delay_count = 0x06,
.xtal_freq_count = 0xbb
}, {
.osc_frequency = 12000000, .enable_delay_count = 0x02,
.stable_count = 0x2f, .active_delay_count = 0x04,
.xtal_freq_count = 0x76
}, {
.osc_frequency = 26000000, .enable_delay_count = 0x04,
.stable_count = 0x66, .active_delay_count = 0x09,
.xtal_freq_count = 0xfe
}, {
.osc_frequency = 16800000, .enable_delay_count = 0x03,
.stable_count = 0x41, .active_delay_count = 0x0a,
.xtal_freq_count = 0xa4
},
};
static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
[tegra_clk_ispb] = { .dt_id = TEGRA124_CLK_ISPB, .present = true },
[tegra_clk_rtc] = { .dt_id = TEGRA124_CLK_RTC, .present = true },
......@@ -1063,88 +1000,6 @@ static struct tegra_devclk devclks[] __initdata = {
static struct clk **clks;
static void tegra124_utmi_param_configure(void __iomem *clk_base)
{
unsigned int i;
u32 reg;
for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
if (osc_freq == utmi_parameters[i].osc_frequency)
break;
}
if (i >= ARRAY_SIZE(utmi_parameters)) {
pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
osc_freq);
return;
}
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL stable and active counts */
/* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
active_delay_count);
/* Remove power downs from UTMIP PLL control bits */
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL delay and oscillator frequency counts */
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
enable_delay_count);
reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
xtal_freq_count);
/* Remove power downs from UTMIP PLL control bits */
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
/* Setup HW control of UTMIPLL */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
udelay(1);
/* Setup SW override of UTMIPLL assuming USB2.0
ports are assigned to USB2 */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
udelay(1);
/* Enable HW control UTMIPLL */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
}
static __init void tegra124_periph_clk_init(void __iomem *clk_base,
void __iomem *pmc_base)
{
......@@ -1195,7 +1050,6 @@ static __init void tegra124_periph_clk_init(void __iomem *clk_base,
static void __init tegra124_pll_init(void __iomem *clk_base,
void __iomem *pmc)
{
u32 val;
struct clk *clk;
/* PLLC */
......@@ -1256,17 +1110,11 @@ static void __init tegra124_pll_init(void __iomem *clk_base,
clks[TEGRA124_CLK_PLL_M_UD] = clk;
/* PLLU */
val = readl(clk_base + pll_u_params.base_reg);
val &= ~BIT(24); /* disable PLLU_OVERRIDE */
writel(val, clk_base + pll_u_params.base_reg);
clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
&pll_u_params, &pll_u_lock);
clk = tegra_clk_register_pllu_tegra114("pll_u", "pll_ref", clk_base, 0,
&pll_u_params, &pll_u_lock);
clk_register_clkdev(clk, "pll_u", NULL);
clks[TEGRA124_CLK_PLL_U] = clk;
tegra124_utmi_param_configure(clk_base);
/* PLLU_480M */
clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
......
drivers/clk/tegra/clk-tegra210.c
View file @ 345c4296
This diff is collapsed.
drivers/clk/tegra/clk-tegra30.c
View file @ 345c4296
......@@ -118,20 +118,6 @@
#define AUDIO_SYNC_DOUBLER 0x49c
#define UTMIP_PLL_CFG2 0x488
#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
#define UTMIP_PLL_CFG1 0x484
#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
/* Tegra CPU clock and reset control regs */
#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c
#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340
......@@ -207,46 +193,6 @@ static DEFINE_SPINLOCK(emc_lock);
static struct clk **clks;
/*
* Structure defining the fields for USB UTMI clocks Parameters.
*/
struct utmi_clk_param {
/* Oscillator Frequency in KHz */
u32 osc_frequency;
/* UTMIP PLL Enable Delay Count */
u8 enable_delay_count;
/* UTMIP PLL Stable count */
u8 stable_count;
/* UTMIP PLL Active delay count */
u8 active_delay_count;
/* UTMIP PLL Xtal frequency count */
u8 xtal_freq_count;
};
static const struct utmi_clk_param utmi_parameters[] = {
{
.osc_frequency = 13000000, .enable_delay_count = 0x02,
.stable_count = 0x33, .active_delay_count = 0x05,
.xtal_freq_count = 0x7f
}, {
.osc_frequency = 19200000, .enable_delay_count = 0x03,
.stable_count = 0x4b, .active_delay_count = 0x06,
.xtal_freq_count = 0xbb
}, {
.osc_frequency = 12000000, .enable_delay_count = 0x02,
.stable_count = 0x2f, .active_delay_count = 0x04,
.xtal_freq_count = 0x76
}, {
.osc_frequency = 26000000, .enable_delay_count = 0x04,
.stable_count = 0x66, .active_delay_count = 0x09,
.xtal_freq_count = 0xfe
}, {
.osc_frequency = 16800000, .enable_delay_count = 0x03,
.stable_count = 0x41, .active_delay_count = 0x0a,
.xtal_freq_count = 0xa4
},
};
static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
{ 12000000, 1040000000, 520, 6, 1, 8 },
{ 13000000, 1040000000, 480, 6, 1, 8 },
......@@ -873,59 +819,6 @@ static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = {
[tegra_clk_pll_a_out0] = { .dt_id = TEGRA30_CLK_PLL_A_OUT0, .present = true },
};
static void tegra30_utmi_param_configure(void)
{
unsigned int i;
u32 reg;
for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
if (input_freq == utmi_parameters[i].osc_frequency)
break;
}
if (i >= ARRAY_SIZE(utmi_parameters)) {
pr_err("%s: Unexpected input rate %lu\n", __func__, input_freq);
return;
}
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL stable and active counts */
reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
reg |= UTMIP_PLL_CFG2_STABLE_COUNT(
utmi_parameters[i].stable_count);
reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(
utmi_parameters[i].active_delay_count);
/* Remove power downs from UTMIP PLL control bits */
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL delay and oscillator frequency counts */
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(
utmi_parameters[i].enable_delay_count);
reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(
utmi_parameters[i].xtal_freq_count);
/* Remove power downs from UTMIP PLL control bits */
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
}
static const char *pll_e_parents[] = { "pll_ref", "pll_p" };
static void __init tegra30_pll_init(void)
......@@ -972,12 +865,10 @@ static void __init tegra30_pll_init(void)
clks[TEGRA30_CLK_PLL_X_OUT0] = clk;
/* PLLU */
clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc_base, 0,
&pll_u_params, NULL);
clk = tegra_clk_register_pllu("pll_u", "pll_ref", clk_base, 0,
&pll_u_params, NULL);
clks[TEGRA30_CLK_PLL_U] = clk;
tegra30_utmi_param_configure();
/* PLLD */
clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc_base, 0,
&pll_d_params, &pll_d_lock);
......
drivers/clk/tegra/clk.h
View file @ 345c4296
......@@ -427,6 +427,23 @@ struct clk *tegra_clk_register_pllmb(const char *name, const char *parent_name,
struct tegra_clk_pll_params *pll_params,
spinlock_t *lock);
struct clk *tegra_clk_register_pllu(const char *name, const char *parent_name,
void __iomem *clk_base, unsigned long flags,
struct tegra_clk_pll_params *pll_params,
spinlock_t *lock);
struct clk *tegra_clk_register_pllu_tegra114(const char *name,
const char *parent_name,
void __iomem *clk_base, unsigned long flags,
struct tegra_clk_pll_params *pll_params,
spinlock_t *lock);
struct clk *tegra_clk_register_pllu_tegra210(const char *name,
const char *parent_name,
void __iomem *clk_base, unsigned long flags,
struct tegra_clk_pll_params *pll_params,
spinlock_t *lock);
/**
* struct tegra_clk_pll_out - PLL divider down clock
*
......
include/dt-bindings/clock/tegra210-car.h
View file @ 345c4296
......@@ -308,7 +308,7 @@
#define TEGRA210_CLK_CLK_OUT_3 279
#define TEGRA210_CLK_BLINK 280
/* 281 */
/* 282 */
#define TEGRA210_CLK_SOR1_SRC 282
/* 283 */
#define TEGRA210_CLK_XUSB_HOST_SRC 284
#define TEGRA210_CLK_XUSB_FALCON_SRC 285
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7