Commit 3c862347 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'renesas-arm64-dt2-for-v4.8' of...

Merge tag 'renesas-arm64-dt2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64

Merge "Second Round of Renesas ARM64 Based SoC DT Updates for v4.8" from Simon Horman:

* Add support for  r8a7796/salvator-x (R-Car Gen 3 M3-W)
* Add CAN support to r8a7795 (R-Car Gen 3 H3)

* tag 'renesas-arm64-dt2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: r8a7796/salvator-x: Enable watchdog timer
  arm64: dts: r8a7796: Add RWDT node
  arm64: dts: r8a7796: Use SYSC "always-on" PM Domain
  arm64: dts: r8a7796: Add SYSC PM Domains
  arm64: dts: salvator-x: add Salvator-X board on R8A7796 SoC
  arm64: dts: r8a7796: Add Renesas R8A7796 SoC support
  arm64: dts: r8a7795: Add CAN FD support
  arm64: dts: r8a7795: Add missing blank lines between cpu nodes
  clk: renesas: r8a7795: Add THS/TSC clock
  clk: renesas: r8a7795: Add DRIF clock
  clk: renesas: r8a7795: Correct lvds clock parent
  clk: renesas: r8a7795: Provide FDP1 clocks
  clk: renesas: Add R8A7792 support
  clk: renesas: mstp: Document R8A7792 support
  clk: renesas: rcar-gen2: Document R8A7792 support
  clk: renesas: cpg-mssr: Add support for R-Car M3-W
  clk: renesas: cpg-mssr: Extract common R-Car Gen3 support code
  clk: renesas: Add r8a7796 CPG Core Clock Definitions
  clk: renesas: cpg-mssr: Document r8a7796 support
parents 8d09251a c805f1a7
......@@ -29,6 +29,8 @@ SoCs:
compatible = "renesas,r8a7794"
- R-Car H3 (R8A77950)
compatible = "renesas,r8a7795"
- R-Car M3-W (R8A77960)
compatible = "renesas,r8a7796"
Boards:
......@@ -61,5 +63,7 @@ Boards:
compatible = "renesas,porter", "renesas,r8a7791"
- Salvator-X (RTP0RC7795SIPB0010S)
compatible = "renesas,salvator-x", "renesas,r8a7795";
- Salvator-X
compatible = "renesas,salvator-x", "renesas,r8a7796";
- SILK (RTP0RC7794LCB00011S)
compatible = "renesas,silk", "renesas,r8a7794"
......@@ -13,7 +13,8 @@ They provide the following functionalities:
Required Properties:
- compatible: Must be one of:
- "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC
- "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
- "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
- reg: Base address and length of the memory resource used by the CPG/MSSR
block
......@@ -21,8 +22,8 @@ Required Properties:
- clocks: References to external parent clocks, one entry for each entry in
clock-names
- clock-names: List of external parent clock names. Valid names are:
- "extal" (r8a7795)
- "extalr" (r8a7795)
- "extal" (r8a7795, r8a7796)
- "extalr" (r8a7795, r8a7796)
- #clock-cells: Must be 2
- For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
......
......@@ -17,6 +17,7 @@ Required Properties:
- "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
- "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
- "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2-W) MSTP gate clocks
- "renesas,r8a7792-mstp-clocks" for R8A7792 (R-Car V2H) MSTP gate clocks
- "renesas,r8a7793-mstp-clocks" for R8A7793 (R-Car M2-N) MSTP gate clocks
- "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks
- "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks
......
......@@ -10,6 +10,7 @@ Required Properties:
- compatible: Must be one of
- "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
- "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
- "renesas,r8a7792-cpg-clocks" for the r8a7792 CPG
- "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG
- "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
and "renesas,rcar-gen2-cpg-clocks" as a fallback.
......
......@@ -121,6 +121,12 @@ config ARCH_R8A7795
help
This enables support for the Renesas R-Car H3 SoC.
config ARCH_R8A7796
bool "Renesas R-Car M3-W SoC Platform"
depends on ARCH_RENESAS
help
This enables support for the Renesas R-Car M3-W SoC.
config ARCH_STRATIX10
bool "Altera's Stratix 10 SoCFPGA Family"
help
......
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb
always := $(dtb-y)
clean-files := *.dtb
......@@ -53,6 +53,7 @@ a57_1: cpu@1 {
next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
a57_2: cpu@2 {
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x2>;
......@@ -61,6 +62,7 @@ a57_2: cpu@2 {
next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
a57_3: cpu@3 {
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x3>;
......@@ -581,6 +583,30 @@ can1: can@e6c38000 {
status = "disabled";
};
canfd: can@e66c0000 {
compatible = "renesas,r8a7795-canfd",
"renesas,rcar-gen3-canfd";
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A7795_CLK_CANFD>,
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
channel0 {
status = "disabled";
};
channel1 {
status = "disabled";
};
};
hscif0: serial@e6540000 {
compatible = "renesas,hscif-r8a7795",
"renesas,rcar-gen3-hscif",
......
/*
* Device Tree Source for the Salvator-X board
*
* Copyright (C) 2016 Renesas Electronics Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
#include "r8a7796.dtsi"
/ {
model = "Renesas Salvator-X board based on r8a7796";
compatible = "renesas,salvator-x", "renesas,r8a7796";
aliases {
serial0 = &scif2;
};
chosen {
bootargs = "ignore_loglevel";
stdout-path = "serial0:115200n8";
};
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x78000000>;
};
};
&extal_clk {
clock-frequency = <16666666>;
};
&scif2 {
status = "okay";
};
&scif_clk {
clock-frequency = <14745600>;
status = "okay";
};
&wdt0 {
timeout-sec = <60>;
status = "okay";
};
/*
* Device Tree Source for the r8a7796 SoC
*
* Copyright (C) 2016 Renesas Electronics Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7796-sysc.h>
/ {
compatible = "renesas,r8a7796";
#address-cells = <2>;
#size-cells = <2>;
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
/* 1 core only at this point */
a57_0: cpu@0 {
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
device_type = "cpu";
power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
L2_CA57: cache-controller@0 {
compatible = "cache";
reg = <0>;
power-domains = <&sysc R8A7796_PD_CA57_SCU>;
cache-unified;
cache-level = <2>;
};
};
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
extalr_clk: extalr {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
/* External SCIF clock - to be overridden by boards that provide it */
scif_clk: scif {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x0 0xf1010000 0 0x1000>,
<0x0 0xf1020000 0 0x20000>,
<0x0 0xf1040000 0 0x20000>,
<0x0 0xf1060000 0 0x20000>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
};
wdt0: watchdog@e6020000 {
compatible = "renesas,r8a7796-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
status = "disabled";
};
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a7796-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
clocks = <&extal_clk>, <&extalr_clk>;
clock-names = "extal", "extalr";
#clock-cells = <2>;
#power-domain-cells = <0>;
};
sysc: system-controller@e6180000 {
compatible = "renesas,r8a7796-sysc";
reg = <0 0xe6180000 0 0x0400>;
#power-domain-cells = <1>;
};
scif2: serial@e6e88000 {
compatible = "renesas,scif-r8a7796",
"renesas,rcar-gen3-scif", "renesas,scif";
reg = <0 0xe6e88000 0 64>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 310>,
<&cpg CPG_CORE R8A7796_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
status = "disabled";
};
};
};
config CLK_RENESAS_CPG_MSSR
bool
default y if ARCH_R8A7795
default y if ARCH_R8A7796
config CLK_RENESAS_CPG_MSTP
bool
......@@ -11,6 +12,7 @@ config CLK_RENESAS_CPG_MSTP
default y if ARCH_R8A7779
default y if ARCH_R8A7790
default y if ARCH_R8A7791
default y if ARCH_R8A7792
default y if ARCH_R8A7793
default y if ARCH_R8A7794
default y if ARCH_SH73A0
......@@ -6,9 +6,11 @@ obj-$(CONFIG_ARCH_R8A7778) += clk-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7792) += clk-rcar-gen2.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7793) += clk-rcar-gen2.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7794) += clk-rcar-gen2.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7795) += r8a7795-cpg-mssr.o
obj-$(CONFIG_ARCH_R8A7795) += r8a7795-cpg-mssr.o rcar-gen3-cpg.o
obj-$(CONFIG_ARCH_R8A7796) += r8a7796-cpg-mssr.o rcar-gen3-cpg.o
obj-$(CONFIG_ARCH_SH73A0) += clk-sh73a0.o clk-div6.o
obj-$(CONFIG_CLK_RENESAS_CPG_MSSR) += renesas-cpg-mssr.o clk-div6.o
......
This diff is collapsed.
/*
* r8a7796 Clock Pulse Generator / Module Standby and Software Reset
*
* Copyright (C) 2016 Glider bvba
*
* Based on r8a7795-cpg-mssr.c
*
* Copyright (C) 2015 Glider bvba
* Copyright (C) 2015 Renesas Electronics Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#include <linux/device.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
#include "renesas-cpg-mssr.h"
#include "rcar-gen3-cpg.h"
enum clk_ids {
/* Core Clock Outputs exported to DT */
LAST_DT_CORE_CLK = R8A7796_CLK_OSC,
/* External Input Clocks */
CLK_EXTAL,
CLK_EXTALR,
/* Internal Core Clocks */
CLK_MAIN,
CLK_PLL0,
CLK_PLL1,
CLK_PLL2,
CLK_PLL3,
CLK_PLL4,
CLK_PLL1_DIV2,
CLK_PLL1_DIV4,
CLK_S0,
CLK_S1,
CLK_S2,
CLK_S3,
CLK_SDSRC,
CLK_SSPSRC,
/* Module Clocks */
MOD_CLK_BASE
};
static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {
/* External Clock Inputs */
DEF_INPUT("extal", CLK_EXTAL),
DEF_INPUT("extalr", CLK_EXTALR),
/* Internal Core Clocks */
DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN3_MAIN, CLK_EXTAL),
DEF_BASE(".pll0", CLK_PLL0, CLK_TYPE_GEN3_PLL0, CLK_MAIN),
DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN3_PLL1, CLK_MAIN),
DEF_BASE(".pll2", CLK_PLL2, CLK_TYPE_GEN3_PLL2, CLK_MAIN),
DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN3_PLL3, CLK_MAIN),
DEF_BASE(".pll4", CLK_PLL4, CLK_TYPE_GEN3_PLL4, CLK_MAIN),
DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1),
DEF_FIXED(".pll1_div4", CLK_PLL1_DIV4, CLK_PLL1_DIV2, 2, 1),
DEF_FIXED(".s0", CLK_S0, CLK_PLL1_DIV2, 2, 1),
DEF_FIXED(".s1", CLK_S1, CLK_PLL1_DIV2, 3, 1),
DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1),
DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1),
/* Core Clock Outputs */
DEF_FIXED("ztr", R8A7796_CLK_ZTR, CLK_PLL1_DIV2, 6, 1),
DEF_FIXED("ztrd2", R8A7796_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
DEF_FIXED("zt", R8A7796_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
DEF_FIXED("zx", R8A7796_CLK_ZX, CLK_PLL1_DIV2, 2, 1),
DEF_FIXED("s0d1", R8A7796_CLK_S0D1, CLK_S0, 1, 1),
DEF_FIXED("s0d2", R8A7796_CLK_S0D2, CLK_S0, 2, 1),
DEF_FIXED("s0d3", R8A7796_CLK_S0D3, CLK_S0, 3, 1),
DEF_FIXED("s0d4", R8A7796_CLK_S0D4, CLK_S0, 4, 1),
DEF_FIXED("s0d6", R8A7796_CLK_S0D6, CLK_S0, 6, 1),
DEF_FIXED("s0d8", R8A7796_CLK_S0D8, CLK_S0, 8, 1),
DEF_FIXED("s0d12", R8A7796_CLK_S0D12, CLK_S0, 12, 1),
DEF_FIXED("s1d1", R8A7796_CLK_S1D1, CLK_S1, 1, 1),
DEF_FIXED("s1d2", R8A7796_CLK_S1D2, CLK_S1, 2, 1),
DEF_FIXED("s1d4", R8A7796_CLK_S1D4, CLK_S1, 4, 1),
DEF_FIXED("s2d1", R8A7796_CLK_S2D1, CLK_S2, 1, 1),
DEF_FIXED("s2d2", R8A7796_CLK_S2D2, CLK_S2, 2, 1),
DEF_FIXED("s2d4", R8A7796_CLK_S2D4, CLK_S2, 4, 1),
DEF_FIXED("s3d1", R8A7796_CLK_S3D1, CLK_S3, 1, 1),
DEF_FIXED("s3d2", R8A7796_CLK_S3D2, CLK_S3, 2, 1),
DEF_FIXED("s3d4", R8A7796_CLK_S3D4, CLK_S3, 4, 1),
DEF_FIXED("cl", R8A7796_CLK_CL, CLK_PLL1_DIV2, 48, 1),
DEF_FIXED("cp", R8A7796_CLK_CP, CLK_EXTAL, 2, 1),
};
static const struct mssr_mod_clk r8a7796_mod_clks[] __initconst = {
DEF_MOD("scif2", 310, R8A7796_CLK_S3D4),
DEF_MOD("intc-ap", 408, R8A7796_CLK_S3D1),
};
static const unsigned int r8a7796_crit_mod_clks[] __initconst = {
MOD_CLK_ID(408), /* INTC-AP (GIC) */
};
/*
* CPG Clock Data
*/
/*
* MD EXTAL PLL0 PLL1 PLL2 PLL3 PLL4
* 14 13 19 17 (MHz)
*-------------------------------------------------------------------
* 0 0 0 0 16.66 x 1 x180 x192 x144 x192 x144
* 0 0 0 1 16.66 x 1 x180 x192 x144 x128 x144
* 0 0 1 0 Prohibited setting
* 0 0 1 1 16.66 x 1 x180 x192 x144 x192 x144
* 0 1 0 0 20 x 1 x150 x160 x120 x160 x120
* 0 1 0 1 20 x 1 x150 x160 x120 x106 x120
* 0 1 1 0 Prohibited setting
* 0 1 1 1 20 x 1 x150 x160 x120 x160 x120
* 1 0 0 0 25 x 1 x120 x128 x96 x128 x96
* 1 0 0 1 25 x 1 x120 x128 x96 x84 x96
* 1 0 1 0 Prohibited setting
* 1 0 1 1 25 x 1 x120 x128 x96 x128 x96
* 1 1 0 0 33.33 / 2 x180 x192 x144 x192 x144
* 1 1 0 1 33.33 / 2 x180 x192 x144 x128 x144
* 1 1 1 0 Prohibited setting
* 1 1 1 1 33.33 / 2 x180 x192 x144 x192 x144
*/
#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 11) | \
(((md) & BIT(13)) >> 11) | \
(((md) & BIT(19)) >> 18) | \
(((md) & BIT(17)) >> 17))
static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[16] __initconst = {
/* EXTAL div PLL1 mult PLL3 mult */
{ 1, 192, 192, },
{ 1, 192, 128, },
{ 0, /* Prohibited setting */ },
{ 1, 192, 192, },
{ 1, 160, 160, },
{ 1, 160, 106, },
{ 0, /* Prohibited setting */ },
{ 1, 160, 160, },
{ 1, 128, 128, },
{ 1, 128, 84, },
{ 0, /* Prohibited setting */ },
{ 1, 128, 128, },
{ 2, 192, 192, },
{ 2, 192, 128, },
{ 0, /* Prohibited setting */ },
{ 2, 192, 192, },
};
static int __init r8a7796_cpg_mssr_init(struct device *dev)
{
const struct rcar_gen3_cpg_pll_config *cpg_pll_config;
u32 cpg_mode = rcar_gen3_read_mode_pins();
cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
if (!cpg_pll_config->extal_div) {
dev_err(dev, "Prohibited setting (cpg_mode=0x%x)\n", cpg_mode);
return -EINVAL;
}
return rcar_gen3_cpg_init(cpg_pll_config, CLK_EXTALR);
}
const struct cpg_mssr_info r8a7796_cpg_mssr_info __initconst = {
/* Core Clocks */
.core_clks = r8a7796_core_clks,
.num_core_clks = ARRAY_SIZE(r8a7796_core_clks),
.last_dt_core_clk = LAST_DT_CORE_CLK,
.num_total_core_clks = MOD_CLK_BASE,
/* Module Clocks */
.mod_clks = r8a7796_mod_clks,
.num_mod_clks = ARRAY_SIZE(r8a7796_mod_clks),
.num_hw_mod_clks = 12 * 32,
/* Critical Module Clocks */
.crit_mod_clks = r8a7796_crit_mod_clks,
.num_crit_mod_clks = ARRAY_SIZE(r8a7796_crit_mod_clks),
/* Callbacks */
.init = r8a7796_cpg_mssr_init,
.cpg_clk_register = rcar_gen3_cpg_clk_register,
};
/*
* R-Car Gen3 Clock Pulse Generator
*
* Copyright (C) 2015-2016 Glider bvba
*
* Based on clk-rcar-gen3.c
*
* Copyright (C) 2015 Renesas Electronics Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#include <linux/bug.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/slab.h>
#include "renesas-cpg-mssr.h"
#include "rcar-gen3-cpg.h"
#define CPG_PLL0CR 0x00d8
#define CPG_PLL2CR 0x002c
#define CPG_PLL4CR 0x01f4
/*
* SDn Clock
*/
#define CPG_SD_STP_HCK BIT(9)
#define CPG_SD_STP_CK BIT(8)
#define CPG_SD_STP_MASK (CPG_SD_STP_HCK | CPG_SD_STP_CK)
#define CPG_SD_FC_MASK (0x7 << 2 | 0x3 << 0)
#define CPG_SD_DIV_TABLE_DATA(stp_hck, stp_ck, sd_srcfc, sd_fc, sd_div) \
{ \
.val = ((stp_hck) ? CPG_SD_STP_HCK : 0) | \
((stp_ck) ? CPG_SD_STP_CK : 0) | \
((sd_srcfc) << 2) | \
((sd_fc) << 0), \
.div = (sd_div), \
}
struct sd_div_table {
u32 val;
unsigned int div;
};
struct sd_clock {
struct clk_hw hw;
void __iomem *reg;
const struct sd_div_table *div_table;
unsigned int div_num;
unsigned int div_min;
unsigned int div_max;
};
/* SDn divider
* sd_srcfc sd_fc div
* stp_hck stp_ck (div) (div) = sd_srcfc x sd_fc
*-------------------------------------------------------------------
* 0 0 0 (1) 1 (4) 4
* 0 0 1 (2) 1 (4) 8
* 1 0 2 (4) 1 (4) 16
* 1 0 3 (8) 1 (4) 32
* 1 0 4 (16) 1 (4) 64
* 0 0 0 (1) 0 (2) 2
* 0 0 1 (2) 0 (2) 4
* 1 0 2 (4) 0 (2) 8
* 1 0 3 (8) 0 (2) 16
* 1 0 4 (16) 0 (2) 32
*/
static const struct sd_div_table cpg_sd_div_table[] = {
/* CPG_SD_DIV_TABLE_DATA(stp_hck, stp_ck, sd_srcfc, sd_fc, sd_div) */
CPG_SD_DIV_TABLE_DATA(0, 0, 0, 1, 4),
CPG_SD_DIV_TABLE_DATA(0, 0, 1, 1, 8),
CPG_SD_DIV_TABLE_DATA(1, 0, 2, 1, 16),
CPG_SD_DIV_TABLE_DATA(1, 0, 3, 1, 32),
CPG_SD_DIV_TABLE_DATA(1, 0, 4, 1, 64),
CPG_SD_DIV_TABLE_DATA(0, 0, 0, 0, 2),
CPG_SD_DIV_TABLE_DATA(0, 0, 1, 0, 4),
CPG_SD_DIV_TABLE_DATA(1, 0, 2, 0, 8),
CPG_SD_DIV_TABLE_DATA(1, 0, 3, 0, 16),
CPG_SD_DIV_TABLE_DATA(1, 0, 4, 0, 32),
};
#define to_sd_clock(_hw) container_of(_hw, struct sd_clock, hw)
static int cpg_sd_clock_enable(struct clk_hw *hw)
{
struct sd_clock *clock = to_sd_clock(hw);
u32 val, sd_fc;
unsigned int i;
val = clk_readl(clock->reg);
sd_fc = val & CPG_SD_FC_MASK;
for (i = 0; i < clock->div_num; i++)
if (sd_fc == (clock->div_table[i].val & CPG_SD_FC_MASK))
break;
if (i >= clock->div_num)
return -EINVAL;
val &= ~(CPG_SD_STP_MASK);
val |= clock->div_table[i].val & CPG_SD_STP_MASK;
clk_writel(val, clock->reg);
return 0;
}
static void cpg_sd_clock_disable(struct clk_hw *hw)
{
struct sd_clock *clock = to_sd_clock(hw);
clk_writel(clk_readl(clock->reg) | CPG_SD_STP_MASK, clock->reg);
}
static int cpg_sd_clock_is_enabled(struct clk_hw *hw)
{
struct sd_clock *clock = to_sd_clock(hw);
return !(clk_readl(clock->reg) & CPG_SD_STP_MASK);
}
static unsigned long cpg_sd_clock_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct sd_clock *clock = to_sd_clock(hw);
unsigned long rate = parent_rate;
u32 val, sd_fc;
unsigned int i;
val = clk_readl(clock->reg);
sd_fc = val & CPG_SD_FC_MASK;
for (i = 0; i < clock->div_num; i++)
if (sd_fc == (clock->div_table[i].val & CPG_SD_FC_MASK))
break;
if (i >= clock->div_num)
return -EINVAL;
return DIV_ROUND_CLOSEST(rate, clock->div_table[i].div);
}
static unsigned int cpg_sd_clock_calc_div(struct sd_clock *clock,
unsigned long rate,
unsigned long parent_rate)
{
unsigned int div;
if (!rate)
rate = 1;
div = DIV_ROUND_CLOSEST(parent_rate, rate);
return clamp_t(unsigned int, div, clock->div_min, clock->div_max);
}
static long cpg_sd_clock_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct sd_clock *clock = to_sd_clock(hw);
unsigned int div = cpg_sd_clock_calc_div(clock, rate, *parent_rate);
return DIV_ROUND_CLOSEST(*parent_rate, div);
}
static int cpg_sd_clock_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct sd_clock *clock = to_sd_clock(hw);
unsigned int div = cpg_sd_clock_calc_div(clock, rate, parent_rate);
u32 val;
unsigned int i;
for (i = 0; i < clock->div_num; i++)
if (div == clock->div_table[i].div)
break;
if (i >= clock->div_num)
return -EINVAL;
val = clk_readl(clock->reg);
val &= ~(CPG_SD_STP_MASK | CPG_SD_FC_MASK);
val |= clock->div_table[i].val & (CPG_SD_STP_MASK | CPG_SD_FC_MASK);
clk_writel(val, clock->reg);
return 0;
}
static const struct clk_ops cpg_sd_clock_ops = {
.enable = cpg_sd_clock_enable,
.disable = cpg_sd_clock_disable,
.is_enabled = cpg_sd_clock_is_enabled,
.recalc_rate = cpg_sd_clock_recalc_rate,
.round_rate = cpg_sd_clock_round_rate,
.set_rate = cpg_sd_clock_set_rate,
};
static struct clk * __init cpg_sd_clk_register(const struct cpg_core_clk *core,
void __iomem *base,
const char *parent_name)
{
struct clk_init_data init;
struct sd_clock *clock;
struct clk *clk;
unsigned int i;
clock = kzalloc(sizeof(*clock), GFP_KERNEL);
if (!clock)
return ERR_PTR(-ENOMEM);
init.name = core->name;
init.ops = &cpg_sd_clock_ops;
init.flags = CLK_IS_BASIC | CLK_SET_RATE_PARENT;
init.parent_names = &parent_name;
init.num_parents = 1;
clock->reg = base + core->offset;
clock->hw.init = &init;
clock->div_table = cpg_sd_div_table;
clock->div_num = ARRAY_SIZE(cpg_sd_div_table);
clock->div_max = clock->div_table[0].div;
clock->div_min = clock->div_max;
for (i = 1; i < clock->div_num; i++) {
clock->div_max = max(clock->div_max, clock->div_table[i].div);
clock->div_min = min(clock->div_min, clock->div_table[i].div);
}
clk = clk_register(NULL, &clock->hw);
if (IS_ERR(clk))
kfree(clock);
return clk;
}
static const struct rcar_gen3_cpg_pll_config *cpg_pll_config __initdata;
static unsigned int cpg_clk_extalr __initdata;
struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
struct clk **clks, void __iomem *base)
{
const struct clk *parent;
unsigned int mult = 1;
unsigned int div = 1;
u32 value;
parent = clks[core->parent];
if (IS_ERR(parent))
return ERR_CAST(parent);
switch (core->type) {
case CLK_TYPE_GEN3_MAIN:
div = cpg_pll_config->extal_div;
break;
case CLK_TYPE_GEN3_PLL0:
/*
* PLL0 is a configurable multiplier clock. Register it as a
* fixed factor clock for now as there's no generic multiplier
* clock implementation and we currently have no need to change
* the multiplier value.
*/
value = readl(base + CPG_PLL0CR);
mult = (((value >> 24) & 0x7f) + 1) * 2;
break;
case CLK_TYPE_GEN3_PLL1:
mult = cpg_pll_config->pll1_mult;
break;
case CLK_TYPE_GEN3_PLL2:
/*
* PLL2 is a configurable multiplier clock. Register it as a
* fixed factor clock for now as there's no generic multiplier
* clock implementation and we currently have no need to change
* the multiplier value.
*/
value = readl(base + CPG_PLL2CR);
mult = (((value >> 24) & 0x7f) + 1) * 2;
break;
case CLK_TYPE_GEN3_PLL3:
mult = cpg_pll_config->pll3_mult;
break;
case CLK_TYPE_GEN3_PLL4:
/*
* PLL4 is a configurable multiplier clock. Register it as a
* fixed factor clock for now as there's no generic multiplier
* clock implementation and we currently have no need to change
* the multiplier value.
*/
value = readl(base + CPG_PLL4CR);
mult = (((value >> 24) & 0x7f) + 1) * 2;
break;
case CLK_TYPE_GEN3_SD:
return cpg_sd_clk_register(core, base, __clk_get_name(parent));
case CLK_TYPE_GEN3_R:
/*
* RINT is default.
* Only if EXTALR is populated, we switch to it.
*/
value = readl(base + CPG_RCKCR) & 0x3f;
if (clk_get_rate(clks[cpg_clk_extalr])) {
parent = clks[cpg_clk_extalr];
value |= BIT(15);
}
writel(value, base + CPG_RCKCR);
break;
default:
return ERR_PTR(-EINVAL);
}
return clk_register_fixed_factor(NULL, core->name,
__clk_get_name(parent), 0, mult, div);
}
/*
* Reset register definitions.
*/
#define MODEMR 0xe6160060
u32 __init rcar_gen3_read_mode_pins(void)
{
void __iomem *modemr = ioremap_nocache(MODEMR, 4);
u32 mode;
BUG_ON(!modemr);
mode = ioread32(modemr);
iounmap(modemr);
return mode;
}
int __init rcar_gen3_cpg_init(const struct rcar_gen3_cpg_pll_config *config,
unsigned int clk_extalr)
{
cpg_pll_config = config;
cpg_clk_extalr = clk_extalr;
return 0;
}
/*
* R-Car Gen3 Clock Pulse Generator
*
* Copyright (C) 2015-2016 Glider bvba
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#ifndef __CLK_RENESAS_RCAR_GEN3_CPG_H__
#define __CLK_RENESAS_RCAR_GEN3_CPG_H__
enum rcar_gen3_clk_types {
CLK_TYPE_GEN3_MAIN = CLK_TYPE_CUSTOM,
CLK_TYPE_GEN3_PLL0,
CLK_TYPE_GEN3_PLL1,
CLK_TYPE_GEN3_PLL2,
CLK_TYPE_GEN3_PLL3,
CLK_TYPE_GEN3_PLL4,
CLK_TYPE_GEN3_SD,
CLK_TYPE_GEN3_R,
};
#define DEF_GEN3_SD(_name, _id, _parent, _offset) \
DEF_BASE(_name, _id, CLK_TYPE_GEN3_SD, _parent, .offset = _offset)
struct rcar_gen3_cpg_pll_config {
unsigned int extal_div;
unsigned int pll1_mult;
unsigned int pll3_mult;
};
#define CPG_RCKCR 0x240
u32 rcar_gen3_read_mode_pins(void);
struct clk *rcar_gen3_cpg_clk_register(struct device *dev,
const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
struct clk **clks, void __iomem *base);
int rcar_gen3_cpg_init(const struct rcar_gen3_cpg_pll_config *config,
unsigned int clk_extalr);
#endif
......@@ -508,6 +508,12 @@ static const struct of_device_id cpg_mssr_match[] = {
.compatible = "renesas,r8a7795-cpg-mssr",
.data = &r8a7795_cpg_mssr_info,
},
#endif
#ifdef CONFIG_ARCH_R8A7796
{
.compatible = "renesas,r8a7796-cpg-mssr",
.data = &r8a7796_cpg_mssr_info,
},
#endif
{ /* sentinel */ }
};
......
......@@ -131,4 +131,5 @@ struct cpg_mssr_info {
};
extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7796_cpg_mssr_info;
#endif
/*
* Copyright (C) 2016 Renesas Electronics Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__
#define __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__
#include <dt-bindings/clock/renesas-cpg-mssr.h>
/* r8a7796 CPG Core Clocks */
#define R8A7796_CLK_Z 0
#define R8A7796_CLK_Z2 1
#define R8A7796_CLK_ZR 2
#define R8A7796_CLK_ZG 3
#define R8A7796_CLK_ZTR 4
#define R8A7796_CLK_ZTRD2 5
#define R8A7796_CLK_ZT 6
#define R8A7796_CLK_ZX 7
#define R8A7796_CLK_S0D1 8
#define R8A7796_CLK_S0D2 9
#define R8A7796_CLK_S0D3 10
#define R8A7796_CLK_S0D4 11
#define R8A7796_CLK_S0D6 12
#define R8A7796_CLK_S0D8 13
#define R8A7796_CLK_S0D12 14
#define R8A7796_CLK_S1D1 15
#define R8A7796_CLK_S1D2 16
#define R8A7796_CLK_S1D4 17
#define R8A7796_CLK_S2D1 18
#define R8A7796_CLK_S2D2 19
#define R8A7796_CLK_S2D4 20
#define R8A7796_CLK_S3D1 21
#define R8A7796_CLK_S3D2 22
#define R8A7796_CLK_S3D4 23
#define R8A7796_CLK_LB 24
#define R8A7796_CLK_CL 25
#define R8A7796_CLK_ZB3 26
#define R8A7796_CLK_ZB3D2 27
#define R8A7796_CLK_ZB3D4 28
#define R8A7796_CLK_CR 29
#define R8A7796_CLK_CRD2 30
#define R8A7796_CLK_SD0H 31
#define R8A7796_CLK_SD0 32
#define R8A7796_CLK_SD1H 33
#define R8A7796_CLK_SD1 34
#define R8A7796_CLK_SD2H 35
#define R8A7796_CLK_SD2 36
#define R8A7796_CLK_SD3H 37
#define R8A7796_CLK_SD3 38
#define R8A7796_CLK_SSP2 39
#define R8A7796_CLK_SSP1 40
#define R8A7796_CLK_SSPRS 41
#define R8A7796_CLK_RPC 42
#define R8A7796_CLK_RPCD2 43
#define R8A7796_CLK_MSO 44
#define R8A7796_CLK_CANFD 45
#define R8A7796_CLK_HDMI 46
#define R8A7796_CLK_CSI0 47
#define R8A7796_CLK_CSIREF 48
#define R8A7796_CLK_CP 49
#define R8A7796_CLK_CPEX 50
#define R8A7796_CLK_R 51
#define R8A7796_CLK_OSC 52
#endif /* __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment