Merge tag 'renesas-arm64-dt2-for-v4.8' of...

Merge tag 'renesas-arm64-dt2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64

Merge "Second Round of Renesas ARM64 Based SoC DT Updates for v4.8" from Simon Horman:

* Add support for  r8a7796/salvator-x (R-Car Gen 3 M3-W)
* Add CAN support to r8a7795 (R-Car Gen 3 H3)

* tag 'renesas-arm64-dt2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: r8a7796/salvator-x: Enable watchdog timer
  arm64: dts: r8a7796: Add RWDT node
  arm64: dts: r8a7796: Use SYSC "always-on" PM Domain
  arm64: dts: r8a7796: Add SYSC PM Domains
  arm64: dts: salvator-x: add Salvator-X board on R8A7796 SoC
  arm64: dts: r8a7796: Add Renesas R8A7796 SoC support
  arm64: dts: r8a7795: Add CAN FD support
  arm64: dts: r8a7795: Add missing blank lines between cpu nodes
  clk: renesas: r8a7795: Add THS/TSC clock
  clk: renesas: r8a7795: Add DRIF clock
  clk: renesas: r8a7795: Correct lvds clock parent
  clk: renesas: r8a7795: Provide FDP1 clocks
  clk: renesas: Add R8A7792 support
  clk: renesas: mstp: Document R8A7792 support
  clk: renesas: rcar-gen2: Document R8A7792 support
  clk: renesas: cpg-mssr: Add support for R-Car M3-W
  clk: renesas: cpg-mssr: Extract common R-Car Gen3 support code
  clk: renesas: Add r8a7796 CPG Core Clock Definitions
  clk: renesas: cpg-mssr: Document r8a7796 support

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -29,6 +29,8 @@ SoCs:
     compatible = "renesas,r8a7794"
   - R-Car H3 (R8A77950)
     compatible = "renesas,r8a7795"
+  - R-Car M3-W (R8A77960)
+    compatible = "renesas,r8a7796"
 
 
 Boards:
@@ -61,5 +63,7 @@ Boards:
     compatible = "renesas,porter", "renesas,r8a7791"
   - Salvator-X (RTP0RC7795SIPB0010S)
     compatible = "renesas,salvator-x", "renesas,r8a7795";
+  - Salvator-X
+    compatible = "renesas,salvator-x", "renesas,r8a7796";
   - SILK (RTP0RC7794LCB00011S)
     compatible = "renesas,silk", "renesas,r8a7794"

Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt

@@ -13,7 +13,8 @@ They provide the following functionalities:
 
 Required Properties:
   - compatible: Must be one of:
-      - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC
+      - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
+      - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
 
   - reg: Base address and length of the memory resource used by the CPG/MSSR
     block
@@ -21,8 +22,8 @@ Required Properties:
   - clocks: References to external parent clocks, one entry for each entry in
     clock-names
   - clock-names: List of external parent clock names. Valid names are:
-      - "extal" (r8a7795)
-      - "extalr" (r8a7795)
+      - "extal" (r8a7795, r8a7796)
+      - "extalr" (r8a7795, r8a7796)
 
   - #clock-cells: Must be 2
       - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

@@ -17,6 +17,7 @@ Required Properties:
     - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
     - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
     - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2-W) MSTP gate clocks
+    - "renesas,r8a7792-mstp-clocks" for R8A7792 (R-Car V2H) MSTP gate clocks
     - "renesas,r8a7793-mstp-clocks" for R8A7793 (R-Car M2-N) MSTP gate clocks
     - "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks
     - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks

Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt

@@ -10,6 +10,7 @@ Required Properties:
   - compatible: Must be one of
     - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
     - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
+    - "renesas,r8a7792-cpg-clocks" for the r8a7792 CPG
     - "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG
     - "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
     and "renesas,rcar-gen2-cpg-clocks" as a fallback.

arch/arm64/Kconfig.platforms

@@ -121,6 +121,12 @@ config ARCH_R8A7795
 	help
 	  This enables support for the Renesas R-Car H3 SoC.
 
+config ARCH_R8A7796
+	bool "Renesas R-Car M3-W SoC Platform"
+	depends on ARCH_RENESAS
+	help
+	  This enables support for the Renesas R-Car M3-W SoC.
+
 config ARCH_STRATIX10
 	bool "Altera's Stratix 10 SoCFPGA Family"
 	help

arch/arm64/boot/dts/renesas/Makefile

 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb
 
 always		:= $(dtb-y)
 clean-files	:= *.dtb

arch/arm64/boot/dts/renesas/r8a7795.dtsi

@@ -53,6 +53,7 @@ a57_1: cpu@1 {
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
+
 		a57_2: cpu@2 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x2>;
@@ -61,6 +62,7 @@ a57_2: cpu@2 {
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
+
 		a57_3: cpu@3 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x3>;
@@ -581,6 +583,30 @@ can1: can@e6c38000 {
 			status = "disabled";
 		};
 
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a7795-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
 		hscif0: serial@e6540000 {
 			compatible = "renesas,hscif-r8a7795",
 				     "renesas,rcar-gen3-hscif",

arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts

+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7796.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board based on r8a7796";
+	compatible = "renesas,salvator-x", "renesas,r8a7796";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&scif2 {
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};

arch/arm64/boot/dts/renesas/r8a7796.dtsi

+/*
+ * Device Tree Source for the r8a7796 SoC
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7796-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7796";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 1 core only at this point */
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+		};
+
+		L2_CA57: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			power-domains = <&sysc R8A7796_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		wdt0: watchdog@e6020000 {
+			compatible = "renesas,r8a7796-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7796-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7796-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+	};
+};

drivers/clk/renesas/Kconfig

 config CLK_RENESAS_CPG_MSSR
 	bool
 	default y if ARCH_R8A7795
+	default y if ARCH_R8A7796
 
 config CLK_RENESAS_CPG_MSTP
 	bool
@@ -11,6 +12,7 @@ config CLK_RENESAS_CPG_MSTP
 	default y if ARCH_R8A7779
 	default y if ARCH_R8A7790
 	default y if ARCH_R8A7791
+	default y if ARCH_R8A7792
 	default y if ARCH_R8A7793
 	default y if ARCH_R8A7794
 	default y if ARCH_SH73A0

drivers/clk/renesas/Makefile

@@ -6,9 +6,11 @@ obj-$(CONFIG_ARCH_R8A7778)		+= clk-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)		+= clk-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o clk-div6.o
 obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7792)		+= clk-rcar-gen2.o clk-div6.o
 obj-$(CONFIG_ARCH_R8A7793)		+= clk-rcar-gen2.o clk-div6.o
 obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o clk-div6.o
-obj-$(CONFIG_ARCH_R8A7795)		+= r8a7795-cpg-mssr.o
+obj-$(CONFIG_ARCH_R8A7795)		+= r8a7795-cpg-mssr.o rcar-gen3-cpg.o
+obj-$(CONFIG_ARCH_R8A7796)		+= r8a7796-cpg-mssr.o rcar-gen3-cpg.o
 obj-$(CONFIG_ARCH_SH73A0)		+= clk-sh73a0.o clk-div6.o
 
 obj-$(CONFIG_CLK_RENESAS_CPG_MSSR)	+= renesas-cpg-mssr.o clk-div6.o

drivers/clk/renesas/r8a7796-cpg-mssr.c

+/*
+ * r8a7796 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2016 Glider bvba
+ *
+ * Based on r8a7795-cpg-mssr.c
+ *
+ * Copyright (C) 2015 Glider bvba
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen3-cpg.h"
+
+enum clk_ids {
+	/* Core Clock Outputs exported to DT */
+	LAST_DT_CORE_CLK = R8A7796_CLK_OSC,
+
+	/* External Input Clocks */
+	CLK_EXTAL,
+	CLK_EXTALR,
+
+	/* Internal Core Clocks */
+	CLK_MAIN,
+	CLK_PLL0,
+	CLK_PLL1,
+	CLK_PLL2,
+	CLK_PLL3,
+	CLK_PLL4,
+	CLK_PLL1_DIV2,
+	CLK_PLL1_DIV4,
+	CLK_S0,
+	CLK_S1,
+	CLK_S2,
+	CLK_S3,
+	CLK_SDSRC,
+	CLK_SSPSRC,
+
+	/* Module Clocks */
+	MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {
+	/* External Clock Inputs */
+	DEF_INPUT("extal",  CLK_EXTAL),
+	DEF_INPUT("extalr", CLK_EXTALR),
+
+	/* Internal Core Clocks */
+	DEF_BASE(".main",       CLK_MAIN, CLK_TYPE_GEN3_MAIN, CLK_EXTAL),
+	DEF_BASE(".pll0",       CLK_PLL0, CLK_TYPE_GEN3_PLL0, CLK_MAIN),
+	DEF_BASE(".pll1",       CLK_PLL1, CLK_TYPE_GEN3_PLL1, CLK_MAIN),
+	DEF_BASE(".pll2",       CLK_PLL2, CLK_TYPE_GEN3_PLL2, CLK_MAIN),
+	DEF_BASE(".pll3",       CLK_PLL3, CLK_TYPE_GEN3_PLL3, CLK_MAIN),
+	DEF_BASE(".pll4",       CLK_PLL4, CLK_TYPE_GEN3_PLL4, CLK_MAIN),
+
+	DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2,     CLK_PLL1,       2, 1),
+	DEF_FIXED(".pll1_div4", CLK_PLL1_DIV4,     CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED(".s0",        CLK_S0,            CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED(".s1",        CLK_S1,            CLK_PLL1_DIV2,  3, 1),
+	DEF_FIXED(".s2",        CLK_S2,            CLK_PLL1_DIV2,  4, 1),
+	DEF_FIXED(".s3",        CLK_S3,            CLK_PLL1_DIV2,  6, 1),
+
+	/* Core Clock Outputs */
+	DEF_FIXED("ztr",        R8A7796_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
+	DEF_FIXED("ztrd2",      R8A7796_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
+	DEF_FIXED("zt",         R8A7796_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
+	DEF_FIXED("zx",         R8A7796_CLK_ZX,    CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED("s0d1",       R8A7796_CLK_S0D1,  CLK_S0,         1, 1),
+	DEF_FIXED("s0d2",       R8A7796_CLK_S0D2,  CLK_S0,         2, 1),
+	DEF_FIXED("s0d3",       R8A7796_CLK_S0D3,  CLK_S0,         3, 1),
+	DEF_FIXED("s0d4",       R8A7796_CLK_S0D4,  CLK_S0,         4, 1),
+	DEF_FIXED("s0d6",       R8A7796_CLK_S0D6,  CLK_S0,         6, 1),
+	DEF_FIXED("s0d8",       R8A7796_CLK_S0D8,  CLK_S0,         8, 1),
+	DEF_FIXED("s0d12",      R8A7796_CLK_S0D12, CLK_S0,        12, 1),
+	DEF_FIXED("s1d1",       R8A7796_CLK_S1D1,  CLK_S1,         1, 1),
+	DEF_FIXED("s1d2",       R8A7796_CLK_S1D2,  CLK_S1,         2, 1),
+	DEF_FIXED("s1d4",       R8A7796_CLK_S1D4,  CLK_S1,         4, 1),
+	DEF_FIXED("s2d1",       R8A7796_CLK_S2D1,  CLK_S2,         1, 1),
+	DEF_FIXED("s2d2",       R8A7796_CLK_S2D2,  CLK_S2,         2, 1),
+	DEF_FIXED("s2d4",       R8A7796_CLK_S2D4,  CLK_S2,         4, 1),
+	DEF_FIXED("s3d1",       R8A7796_CLK_S3D1,  CLK_S3,         1, 1),
+	DEF_FIXED("s3d2",       R8A7796_CLK_S3D2,  CLK_S3,         2, 1),
+	DEF_FIXED("s3d4",       R8A7796_CLK_S3D4,  CLK_S3,         4, 1),
+
+	DEF_FIXED("cl",         R8A7796_CLK_CL,    CLK_PLL1_DIV2, 48, 1),
+	DEF_FIXED("cp",         R8A7796_CLK_CP,    CLK_EXTAL,      2, 1),
+};
+
+static const struct mssr_mod_clk r8a7796_mod_clks[] __initconst = {
+	DEF_MOD("scif2",		 310,	R8A7796_CLK_S3D4),
+	DEF_MOD("intc-ap",		 408,	R8A7796_CLK_S3D1),
+};
+
+static const unsigned int r8a7796_crit_mod_clks[] __initconst = {
+	MOD_CLK_ID(408),	/* INTC-AP (GIC) */
+};
+
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ *   MD		EXTAL		PLL0	PLL1	PLL2	PLL3	PLL4
+ * 14 13 19 17	(MHz)
+ *-------------------------------------------------------------------
+ * 0  0  0  0	16.66 x 1	x180	x192	x144	x192	x144
+ * 0  0  0  1	16.66 x 1	x180	x192	x144	x128	x144
+ * 0  0  1  0	Prohibited setting
+ * 0  0  1  1	16.66 x 1	x180	x192	x144	x192	x144
+ * 0  1  0  0	20    x 1	x150	x160	x120	x160	x120
+ * 0  1  0  1	20    x 1	x150	x160	x120	x106	x120
+ * 0  1  1  0	Prohibited setting
+ * 0  1  1  1	20    x 1	x150	x160	x120	x160	x120
+ * 1  0  0  0	25    x 1	x120	x128	x96	x128	x96
+ * 1  0  0  1	25    x 1	x120	x128	x96	x84	x96
+ * 1  0  1  0	Prohibited setting
+ * 1  0  1  1	25    x 1	x120	x128	x96	x128	x96
+ * 1  1  0  0	33.33 / 2	x180	x192	x144	x192	x144
+ * 1  1  0  1	33.33 / 2	x180	x192	x144	x128	x144
+ * 1  1  1  0	Prohibited setting
+ * 1  1  1  1	33.33 / 2	x180	x192	x144	x192	x144
+ */
+#define CPG_PLL_CONFIG_INDEX(md)	((((md) & BIT(14)) >> 11) | \
+					 (((md) & BIT(13)) >> 11) | \
+					 (((md) & BIT(19)) >> 18) | \
+					 (((md) & BIT(17)) >> 17))
+
+static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[16] __initconst = {
+	/* EXTAL div	PLL1 mult	PLL3 mult */
+	{ 1,		192,		192,	},
+	{ 1,		192,		128,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		192,		192,	},
+	{ 1,		160,		160,	},
+	{ 1,		160,		106,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		160,		160,	},
+	{ 1,		128,		128,	},
+	{ 1,		128,		84,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		128,		128,	},
+	{ 2,		192,		192,	},
+	{ 2,		192,		128,	},
+	{ 0, /* Prohibited setting */		},
+	{ 2,		192,		192,	},
+};
+
+static int __init r8a7796_cpg_mssr_init(struct device *dev)
+{
+	const struct rcar_gen3_cpg_pll_config *cpg_pll_config;
+	u32 cpg_mode = rcar_gen3_read_mode_pins();
+
+	cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+	if (!cpg_pll_config->extal_div) {
+		dev_err(dev, "Prohibited setting (cpg_mode=0x%x)\n", cpg_mode);
+		return -EINVAL;
+	}
+
+	return rcar_gen3_cpg_init(cpg_pll_config, CLK_EXTALR);
+}
+
+const struct cpg_mssr_info r8a7796_cpg_mssr_info __initconst = {
+	/* Core Clocks */
+	.core_clks = r8a7796_core_clks,
+	.num_core_clks = ARRAY_SIZE(r8a7796_core_clks),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Module Clocks */
+	.mod_clks = r8a7796_mod_clks,
+	.num_mod_clks = ARRAY_SIZE(r8a7796_mod_clks),
+	.num_hw_mod_clks = 12 * 32,
+
+	/* Critical Module Clocks */
+	.crit_mod_clks = r8a7796_crit_mod_clks,
+	.num_crit_mod_clks = ARRAY_SIZE(r8a7796_crit_mod_clks),
+
+	/* Callbacks */
+	.init = r8a7796_cpg_mssr_init,
+	.cpg_clk_register = rcar_gen3_cpg_clk_register,
+};

drivers/clk/renesas/rcar-gen3-cpg.c

+/*
+ * R-Car Gen3 Clock Pulse Generator
+ *
+ * Copyright (C) 2015-2016 Glider bvba
+ *
+ * Based on clk-rcar-gen3.c
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bug.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen3-cpg.h"
+
+#define CPG_PLL0CR		0x00d8
+#define CPG_PLL2CR		0x002c
+#define CPG_PLL4CR		0x01f4
+
+
+/*
+ * SDn Clock
+ */
+#define CPG_SD_STP_HCK		BIT(9)
+#define CPG_SD_STP_CK		BIT(8)
+
+#define CPG_SD_STP_MASK		(CPG_SD_STP_HCK | CPG_SD_STP_CK)
+#define CPG_SD_FC_MASK		(0x7 << 2 | 0x3 << 0)
+
+#define CPG_SD_DIV_TABLE_DATA(stp_hck, stp_ck, sd_srcfc, sd_fc, sd_div) \
+{ \
+	.val = ((stp_hck) ? CPG_SD_STP_HCK : 0) | \
+	       ((stp_ck) ? CPG_SD_STP_CK : 0) | \
+	       ((sd_srcfc) << 2) | \
+	       ((sd_fc) << 0), \
+	.div = (sd_div), \
+}
+
+struct sd_div_table {
+	u32 val;
+	unsigned int div;
+};
+
+struct sd_clock {
+	struct clk_hw hw;
+	void __iomem *reg;
+	const struct sd_div_table *div_table;
+	unsigned int div_num;
+	unsigned int div_min;
+	unsigned int div_max;
+};
+
+/* SDn divider
+ *                     sd_srcfc   sd_fc   div
+ * stp_hck   stp_ck    (div)      (div)     = sd_srcfc x sd_fc
+ *-------------------------------------------------------------------
+ *  0         0         0 (1)      1 (4)      4
+ *  0         0         1 (2)      1 (4)      8
+ *  1         0         2 (4)      1 (4)     16
+ *  1         0         3 (8)      1 (4)     32
+ *  1         0         4 (16)     1 (4)     64
+ *  0         0         0 (1)      0 (2)      2
+ *  0         0         1 (2)      0 (2)      4
+ *  1         0         2 (4)      0 (2)      8
+ *  1         0         3 (8)      0 (2)     16
+ *  1         0         4 (16)     0 (2)     32
+ */
+static const struct sd_div_table cpg_sd_div_table[] = {
+/*	CPG_SD_DIV_TABLE_DATA(stp_hck,  stp_ck,   sd_srcfc,   sd_fc,  sd_div) */
+	CPG_SD_DIV_TABLE_DATA(0,        0,        0,          1,        4),
+	CPG_SD_DIV_TABLE_DATA(0,        0,        1,          1,        8),
+	CPG_SD_DIV_TABLE_DATA(1,        0,        2,          1,       16),
+	CPG_SD_DIV_TABLE_DATA(1,        0,        3,          1,       32),
+	CPG_SD_DIV_TABLE_DATA(1,        0,        4,          1,       64),
+	CPG_SD_DIV_TABLE_DATA(0,        0,        0,          0,        2),
+	CPG_SD_DIV_TABLE_DATA(0,        0,        1,          0,        4),
+	CPG_SD_DIV_TABLE_DATA(1,        0,        2,          0,        8),
+	CPG_SD_DIV_TABLE_DATA(1,        0,        3,          0,       16),
+	CPG_SD_DIV_TABLE_DATA(1,        0,        4,          0,       32),
+};
+
+#define to_sd_clock(_hw) container_of(_hw, struct sd_clock, hw)
+
+static int cpg_sd_clock_enable(struct clk_hw *hw)
+{
+	struct sd_clock *clock = to_sd_clock(hw);
+	u32 val, sd_fc;
+	unsigned int i;
+
+	val = clk_readl(clock->reg);
+
+	sd_fc = val & CPG_SD_FC_MASK;
+	for (i = 0; i < clock->div_num; i++)
+		if (sd_fc == (clock->div_table[i].val & CPG_SD_FC_MASK))
+			break;
+
+	if (i >= clock->div_num)
+		return -EINVAL;
+
+	val &= ~(CPG_SD_STP_MASK);
+	val |= clock->div_table[i].val & CPG_SD_STP_MASK;
+
+	clk_writel(val, clock->reg);
+
+	return 0;
+}
+
+static void cpg_sd_clock_disable(struct clk_hw *hw)
+{
+	struct sd_clock *clock = to_sd_clock(hw);
+
+	clk_writel(clk_readl(clock->reg) | CPG_SD_STP_MASK, clock->reg);
+}
+
+static int cpg_sd_clock_is_enabled(struct clk_hw *hw)
+{
+	struct sd_clock *clock = to_sd_clock(hw);
+
+	return !(clk_readl(clock->reg) & CPG_SD_STP_MASK);
+}
+
+static unsigned long cpg_sd_clock_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct sd_clock *clock = to_sd_clock(hw);
+	unsigned long rate = parent_rate;
+	u32 val, sd_fc;
+	unsigned int i;
+
+	val = clk_readl(clock->reg);
+
+	sd_fc = val & CPG_SD_FC_MASK;
+	for (i = 0; i < clock->div_num; i++)
+		if (sd_fc == (clock->div_table[i].val & CPG_SD_FC_MASK))
+			break;
+
+	if (i >= clock->div_num)
+		return -EINVAL;
+
+	return DIV_ROUND_CLOSEST(rate, clock->div_table[i].div);
+}
+
+static unsigned int cpg_sd_clock_calc_div(struct sd_clock *clock,
+					  unsigned long rate,
+					  unsigned long parent_rate)
+{
+	unsigned int div;
+
+	if (!rate)
+		rate = 1;
+
+	div = DIV_ROUND_CLOSEST(parent_rate, rate);
+
+	return clamp_t(unsigned int, div, clock->div_min, clock->div_max);
+}
+
+static long cpg_sd_clock_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *parent_rate)
+{
+	struct sd_clock *clock = to_sd_clock(hw);
+	unsigned int div = cpg_sd_clock_calc_div(clock, rate, *parent_rate);
+
+	return DIV_ROUND_CLOSEST(*parent_rate, div);
+}
+
+static int cpg_sd_clock_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct sd_clock *clock = to_sd_clock(hw);
+	unsigned int div = cpg_sd_clock_calc_div(clock, rate, parent_rate);
+	u32 val;
+	unsigned int i;
+
+	for (i = 0; i < clock->div_num; i++)
+		if (div == clock->div_table[i].div)
+			break;
+
+	if (i >= clock->div_num)
+		return -EINVAL;
+
+	val = clk_readl(clock->reg);
+	val &= ~(CPG_SD_STP_MASK | CPG_SD_FC_MASK);
+	val |= clock->div_table[i].val & (CPG_SD_STP_MASK | CPG_SD_FC_MASK);
+	clk_writel(val, clock->reg);
+
+	return 0;
+}
+
+static const struct clk_ops cpg_sd_clock_ops = {
+	.enable = cpg_sd_clock_enable,
+	.disable = cpg_sd_clock_disable,
+	.is_enabled = cpg_sd_clock_is_enabled,
+	.recalc_rate = cpg_sd_clock_recalc_rate,
+	.round_rate = cpg_sd_clock_round_rate,
+	.set_rate = cpg_sd_clock_set_rate,
+};
+
+static struct clk * __init cpg_sd_clk_register(const struct cpg_core_clk *core,
+					       void __iomem *base,
+					       const char *parent_name)
+{
+	struct clk_init_data init;
+	struct sd_clock *clock;
+	struct clk *clk;
+	unsigned int i;
+
+	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
+	if (!clock)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = core->name;
+	init.ops = &cpg_sd_clock_ops;
+	init.flags = CLK_IS_BASIC | CLK_SET_RATE_PARENT;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clock->reg = base + core->offset;
+	clock->hw.init = &init;
+	clock->div_table = cpg_sd_div_table;
+	clock->div_num = ARRAY_SIZE(cpg_sd_div_table);
+
+	clock->div_max = clock->div_table[0].div;
+	clock->div_min = clock->div_max;
+	for (i = 1; i < clock->div_num; i++) {
+		clock->div_max = max(clock->div_max, clock->div_table[i].div);
+		clock->div_min = min(clock->div_min, clock->div_table[i].div);
+	}
+
+	clk = clk_register(NULL, &clock->hw);
+	if (IS_ERR(clk))
+		kfree(clock);
+
+	return clk;
+}
+
+
+static const struct rcar_gen3_cpg_pll_config *cpg_pll_config __initdata;
+static unsigned int cpg_clk_extalr __initdata;
+
+struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
+	const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
+	struct clk **clks, void __iomem *base)
+{
+	const struct clk *parent;
+	unsigned int mult = 1;
+	unsigned int div = 1;
+	u32 value;
+
+	parent = clks[core->parent];
+	if (IS_ERR(parent))
+		return ERR_CAST(parent);
+
+	switch (core->type) {
+	case CLK_TYPE_GEN3_MAIN:
+		div = cpg_pll_config->extal_div;
+		break;
+
+	case CLK_TYPE_GEN3_PLL0:
+		/*
+		 * PLL0 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		value = readl(base + CPG_PLL0CR);
+		mult = (((value >> 24) & 0x7f) + 1) * 2;
+		break;
+
+	case CLK_TYPE_GEN3_PLL1:
+		mult = cpg_pll_config->pll1_mult;
+		break;
+
+	case CLK_TYPE_GEN3_PLL2:
+		/*
+		 * PLL2 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		value = readl(base + CPG_PLL2CR);
+		mult = (((value >> 24) & 0x7f) + 1) * 2;
+		break;
+
+	case CLK_TYPE_GEN3_PLL3:
+		mult = cpg_pll_config->pll3_mult;
+		break;
+
+	case CLK_TYPE_GEN3_PLL4:
+		/*
+		 * PLL4 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		value = readl(base + CPG_PLL4CR);
+		mult = (((value >> 24) & 0x7f) + 1) * 2;
+		break;
+
+	case CLK_TYPE_GEN3_SD:
+		return cpg_sd_clk_register(core, base, __clk_get_name(parent));
+
+	case CLK_TYPE_GEN3_R:
+		/*
+		 * RINT is default.
+		 * Only if EXTALR is populated, we switch to it.
+		 */
+		value = readl(base + CPG_RCKCR) & 0x3f;
+
+		if (clk_get_rate(clks[cpg_clk_extalr])) {
+			parent = clks[cpg_clk_extalr];
+			value |= BIT(15);
+		}
+
+		writel(value, base + CPG_RCKCR);
+		break;
+
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	return clk_register_fixed_factor(NULL, core->name,
+					 __clk_get_name(parent), 0, mult, div);
+}
+
+/*
+ * Reset register definitions.
+ */
+#define MODEMR	0xe6160060
+
+u32 __init rcar_gen3_read_mode_pins(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+	u32 mode;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	return mode;
+}
+
+int __init rcar_gen3_cpg_init(const struct rcar_gen3_cpg_pll_config *config,
+			      unsigned int clk_extalr)
+{
+	cpg_pll_config = config;
+	cpg_clk_extalr = clk_extalr;
+	return 0;
+}

drivers/clk/renesas/rcar-gen3-cpg.h

+/*
+ * R-Car Gen3 Clock Pulse Generator
+ *
+ * Copyright (C) 2015-2016 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#ifndef __CLK_RENESAS_RCAR_GEN3_CPG_H__
+#define __CLK_RENESAS_RCAR_GEN3_CPG_H__
+
+enum rcar_gen3_clk_types {
+	CLK_TYPE_GEN3_MAIN = CLK_TYPE_CUSTOM,
+	CLK_TYPE_GEN3_PLL0,
+	CLK_TYPE_GEN3_PLL1,
+	CLK_TYPE_GEN3_PLL2,
+	CLK_TYPE_GEN3_PLL3,
+	CLK_TYPE_GEN3_PLL4,
+	CLK_TYPE_GEN3_SD,
+	CLK_TYPE_GEN3_R,
+};
+
+#define DEF_GEN3_SD(_name, _id, _parent, _offset)	\
+	DEF_BASE(_name, _id, CLK_TYPE_GEN3_SD, _parent, .offset = _offset)
+
+struct rcar_gen3_cpg_pll_config {
+	unsigned int extal_div;
+	unsigned int pll1_mult;
+	unsigned int pll3_mult;
+};
+
+#define CPG_RCKCR	0x240
+
+u32 rcar_gen3_read_mode_pins(void);
+struct clk *rcar_gen3_cpg_clk_register(struct device *dev,
+	const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
+	struct clk **clks, void __iomem *base);
+int rcar_gen3_cpg_init(const struct rcar_gen3_cpg_pll_config *config,
+		       unsigned int clk_extalr);
+
+#endif

drivers/clk/renesas/renesas-cpg-mssr.c

@@ -508,6 +508,12 @@ static const struct of_device_id cpg_mssr_match[] = {
 		.compatible = "renesas,r8a7795-cpg-mssr",
 		.data = &r8a7795_cpg_mssr_info,
 	},
+#endif
+#ifdef CONFIG_ARCH_R8A7796
+	{
+		.compatible = "renesas,r8a7796-cpg-mssr",
+		.data = &r8a7796_cpg_mssr_info,
+	},
 #endif
 	{ /* sentinel */ }
 };

drivers/clk/renesas/renesas-cpg-mssr.h

@@ -131,4 +131,5 @@ struct cpg_mssr_info {
 };
 
 extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
+extern const struct cpg_mssr_info r8a7796_cpg_mssr_info;
 #endif

include/dt-bindings/clock/r8a7796-cpg-mssr.h

+/*
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a7796 CPG Core Clocks */
+#define R8A7796_CLK_Z			0
+#define R8A7796_CLK_Z2			1
+#define R8A7796_CLK_ZR			2
+#define R8A7796_CLK_ZG			3
+#define R8A7796_CLK_ZTR			4
+#define R8A7796_CLK_ZTRD2		5
+#define R8A7796_CLK_ZT			6
+#define R8A7796_CLK_ZX			7
+#define R8A7796_CLK_S0D1		8
+#define R8A7796_CLK_S0D2		9
+#define R8A7796_CLK_S0D3		10
+#define R8A7796_CLK_S0D4		11
+#define R8A7796_CLK_S0D6		12
+#define R8A7796_CLK_S0D8		13
+#define R8A7796_CLK_S0D12		14
+#define R8A7796_CLK_S1D1		15
+#define R8A7796_CLK_S1D2		16
+#define R8A7796_CLK_S1D4		17
+#define R8A7796_CLK_S2D1		18
+#define R8A7796_CLK_S2D2		19
+#define R8A7796_CLK_S2D4		20
+#define R8A7796_CLK_S3D1		21
+#define R8A7796_CLK_S3D2		22
+#define R8A7796_CLK_S3D4		23
+#define R8A7796_CLK_LB			24
+#define R8A7796_CLK_CL			25
+#define R8A7796_CLK_ZB3			26
+#define R8A7796_CLK_ZB3D2		27
+#define R8A7796_CLK_ZB3D4		28
+#define R8A7796_CLK_CR			29
+#define R8A7796_CLK_CRD2		30
+#define R8A7796_CLK_SD0H		31
+#define R8A7796_CLK_SD0			32
+#define R8A7796_CLK_SD1H		33
+#define R8A7796_CLK_SD1			34
+#define R8A7796_CLK_SD2H		35
+#define R8A7796_CLK_SD2			36
+#define R8A7796_CLK_SD3H		37
+#define R8A7796_CLK_SD3			38
+#define R8A7796_CLK_SSP2		39
+#define R8A7796_CLK_SSP1		40
+#define R8A7796_CLK_SSPRS		41
+#define R8A7796_CLK_RPC			42
+#define R8A7796_CLK_RPCD2		43
+#define R8A7796_CLK_MSO			44
+#define R8A7796_CLK_CANFD		45
+#define R8A7796_CLK_HDMI		46
+#define R8A7796_CLK_CSI0		47
+#define R8A7796_CLK_CSIREF		48
+#define R8A7796_CLK_CP			49
+#define R8A7796_CLK_CPEX		50
+#define R8A7796_CLK_R			51
+#define R8A7796_CLK_OSC			52
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__ */