Merge tag 'iio-for-3.11b' of...

Merge tag 'iio-for-3.11b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second round of IIO new stuff and cleanups for the 3.11 cycle.

1) Pressure sensor support in the st sensors driver - LPS331AP currently.
2) Graduation of generic interrupt from staging with some related cleanup.
3) A number of platform_set_drvdata on remove removals.
4) 2 conditional build changes to prevent device tree structures from being
   built in when device tree isn't enabled.  These just save a bit of space
   rather than being strictly required at the moment.
5) A couple of strict_strtoul -> kstrtoul conversions.

drivers/iio/Kconfig

@@ -73,5 +73,6 @@ source "drivers/iio/magnetometer/Kconfig"
 if IIO_TRIGGER
    source "drivers/iio/trigger/Kconfig"
 endif #IIO_TRIGGER
+source "drivers/iio/pressure/Kconfig"
 
 endif # IIO

drivers/iio/Makefile

@@ -22,3 +22,4 @@ obj-y += imu/
 obj-y += light/
 obj-y += magnetometer/
 obj-y += trigger/
+obj-y += pressure/

drivers/iio/accel/st_accel_core.c

@@ -26,6 +26,8 @@
 #include <linux/iio/common/st_sensors.h>
 #include "st_accel.h"
 
+#define ST_ACCEL_NUMBER_DATA_CHANNELS		3
+
 /* DEFAULT VALUE FOR SENSORS */
 #define ST_ACCEL_DEFAULT_OUT_X_L_ADDR		0x28
 #define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR		0x2a
@@ -125,22 +127,34 @@
 #define ST_ACCEL_3_MULTIREAD_BIT		false
 
 static const struct iio_chan_spec st_accel_12bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
-		ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
-		ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
-		ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 12, 16,
+			ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 12, 16,
+			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 12, 16,
+			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
 static const struct iio_chan_spec st_accel_16bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+			ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+			ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+			ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
@@ -442,6 +456,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 	if (err < 0)
 		goto st_accel_common_probe_error;
 
+	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
 	adata->multiread_bit = adata->sensor->multi_read_bit;
 	indio_dev->channels = adata->sensor->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;

drivers/iio/adc/at91_adc.c

@@ -774,11 +774,13 @@ static int at91_adc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
 static const struct of_device_id at91_adc_dt_ids[] = {
 	{ .compatible = "atmel,at91sam9260-adc" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, at91_adc_dt_ids);
+#endif
 
 static struct platform_driver at91_adc_driver = {
 	.probe = at91_adc_probe,

drivers/iio/adc/max1363.c

@@ -660,7 +660,7 @@ static ssize_t max1363_monitor_store_freq(struct device *dev,
 	unsigned long val;
 	bool found = false;
 
-	ret = strict_strtoul(buf, 10, &val);
+	ret = kstrtoul(buf, 10, &val);
 	if (ret)
 		return -EINVAL;
 	for (i = 0; i < ARRAY_SIZE(max1363_monitor_speeds); i++)

drivers/iio/common/st_sensors/st_sensors_buffer.c

@@ -24,11 +24,20 @@
 
 int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
 {
+	u8 *addr;
 	int i, n = 0, len;
-	u8 addr[ST_SENSORS_NUMBER_DATA_CHANNELS];
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	unsigned int num_data_channels = sdata->num_data_channels;
+	unsigned int byte_for_channel =
+			indio_dev->channels[0].scan_type.storagebits >> 3;
 
-	for (i = 0; i < ST_SENSORS_NUMBER_DATA_CHANNELS; i++) {
+	addr = kmalloc(num_data_channels, GFP_KERNEL);
+	if (!addr) {
+		len = -ENOMEM;
+		goto st_sensors_get_buffer_element_error;
+	}
+
+	for (i = 0; i < num_data_channels; i++) {
 		if (test_bit(i, indio_dev->active_scan_mask)) {
 			addr[n] = indio_dev->channels[i].address;
 			n++;
@@ -37,52 +46,58 @@ int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
 	switch (n) {
 	case 1:
 		len = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev,
-			addr[0], ST_SENSORS_BYTE_FOR_CHANNEL, buf,
-			sdata->multiread_bit);
+			addr[0], byte_for_channel, buf, sdata->multiread_bit);
 		break;
 	case 2:
-		if ((addr[1] - addr[0]) == ST_SENSORS_BYTE_FOR_CHANNEL) {
+		if ((addr[1] - addr[0]) == byte_for_channel) {
 			len = sdata->tf->read_multiple_byte(&sdata->tb,
-					sdata->dev, addr[0],
-					ST_SENSORS_BYTE_FOR_CHANNEL*n,
-					buf, sdata->multiread_bit);
+				sdata->dev, addr[0], byte_for_channel * n,
+				buf, sdata->multiread_bit);
 		} else {
-			u8 rx_array[ST_SENSORS_BYTE_FOR_CHANNEL*
-				    ST_SENSORS_NUMBER_DATA_CHANNELS];
+			u8 *rx_array;
+			rx_array = kmalloc(byte_for_channel * num_data_channels,
+					   GFP_KERNEL);
+			if (!rx_array) {
+				len = -ENOMEM;
+				goto st_sensors_free_memory;
+			}
+
 			len = sdata->tf->read_multiple_byte(&sdata->tb,
 				sdata->dev, addr[0],
-				ST_SENSORS_BYTE_FOR_CHANNEL*
-				ST_SENSORS_NUMBER_DATA_CHANNELS,
+				byte_for_channel * num_data_channels,
 				rx_array, sdata->multiread_bit);
-			if (len < 0)
-				goto read_data_channels_error;
+			if (len < 0) {
+				kfree(rx_array);
+				goto st_sensors_free_memory;
+			}
 
-			for (i = 0; i < n * ST_SENSORS_NUMBER_DATA_CHANNELS;
-									i++) {
+			for (i = 0; i < n * num_data_channels; i++) {
 				if (i < n)
 					buf[i] = rx_array[i];
 				else
 					buf[i] = rx_array[n + i];
 			}
-			len = ST_SENSORS_BYTE_FOR_CHANNEL*n;
+			kfree(rx_array);
+			len = byte_for_channel * n;
 		}
 		break;
 	case 3:
 		len = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev,
-			addr[0], ST_SENSORS_BYTE_FOR_CHANNEL*
-			ST_SENSORS_NUMBER_DATA_CHANNELS,
+			addr[0], byte_for_channel * num_data_channels,
 			buf, sdata->multiread_bit);
 		break;
 	default:
 		len = -EINVAL;
-		goto read_data_channels_error;
+		goto st_sensors_free_memory;
 	}
-	if (len != ST_SENSORS_BYTE_FOR_CHANNEL*n) {
+	if (len != byte_for_channel * n) {
 		len = -EIO;
-		goto read_data_channels_error;
+		goto st_sensors_free_memory;
 	}
 
-read_data_channels_error:
+st_sensors_free_memory:
+	kfree(addr);
+st_sensors_get_buffer_element_error:
 	return len;
 }
 EXPORT_SYMBOL(st_sensors_get_buffer_element);

drivers/iio/common/st_sensors/st_sensors_core.c

@@ -20,6 +20,11 @@
 
 #define ST_SENSORS_WAI_ADDRESS		0x0f
 
+static inline u32 st_sensors_get_unaligned_le24(const u8 *p)
+{
+	return ((s32)((p[0] | p[1] << 8 | p[2] << 16) << 8) >> 8);
+}
+
 static int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
 						u8 reg_addr, u8 mask, u8 data)
 {
@@ -112,7 +117,8 @@ static int st_sensors_match_fs(struct st_sensors *sensor,
 	return ret;
 }
 
-static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
+static int st_sensors_set_fullscale(struct iio_dev *indio_dev,
+							unsigned int fs)
 {
 	int err, i = 0;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
@@ -273,21 +279,33 @@ int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale)
 EXPORT_SYMBOL(st_sensors_set_fullscale_by_gain);
 
 static int st_sensors_read_axis_data(struct iio_dev *indio_dev,
-							u8 ch_addr, int *data)
+				struct iio_chan_spec const *ch, int *data)
 {
 	int err;
-	u8 outdata[ST_SENSORS_BYTE_FOR_CHANNEL];
+	u8 *outdata;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	unsigned int byte_for_channel = ch->scan_type.storagebits >> 3;
+
+	outdata = kmalloc(byte_for_channel, GFP_KERNEL);
+	if (!outdata) {
+		err = -EINVAL;
+		goto st_sensors_read_axis_data_error;
+	}
 
 	err = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev,
-				ch_addr, ST_SENSORS_BYTE_FOR_CHANNEL,
+				ch->address, byte_for_channel,
 				outdata, sdata->multiread_bit);
 	if (err < 0)
-		goto read_error;
+		goto st_sensors_free_memory;
 
-	*data = (s16)get_unaligned_le16(outdata);
+	if (byte_for_channel == 2)
+		*data = (s16)get_unaligned_le16(outdata);
+	else if (byte_for_channel == 3)
+		*data = (s32)st_sensors_get_unaligned_le24(outdata);
 
-read_error:
+st_sensors_free_memory:
+	kfree(outdata);
+st_sensors_read_axis_data_error:
 	return err;
 }
 
@@ -307,7 +325,7 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
 			goto read_error;
 
 		msleep((sdata->sensor->bootime * 1000) / sdata->odr);
-		err = st_sensors_read_axis_data(indio_dev, ch->address, val);
+		err = st_sensors_read_axis_data(indio_dev, ch, val);
 		if (err < 0)
 			goto read_error;
 

drivers/iio/gyro/st_gyro_core.c

@@ -27,6 +27,8 @@
 #include <linux/iio/common/st_sensors.h>
 #include "st_gyro.h"
 
+#define ST_GYRO_NUMBER_DATA_CHANNELS		3
+
 /* DEFAULT VALUE FOR SENSORS */
 #define ST_GYRO_DEFAULT_OUT_X_L_ADDR		0x28
 #define ST_GYRO_DEFAULT_OUT_Y_L_ADDR		0x2a
@@ -86,15 +88,18 @@
 #define ST_GYRO_2_MULTIREAD_BIT			true
 
 static const struct iio_chan_spec st_gyro_16bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_X,
-		IIO_MOD_X, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS,
-						ST_GYRO_DEFAULT_OUT_X_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_Y,
-		IIO_MOD_Y, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS,
-						ST_GYRO_DEFAULT_OUT_Y_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_Z,
-		IIO_MOD_Z, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS,
-						ST_GYRO_DEFAULT_OUT_Z_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+			ST_GYRO_DEFAULT_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+			ST_GYRO_DEFAULT_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+			ST_GYRO_DEFAULT_OUT_Z_L_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
@@ -310,6 +315,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
 	if (err < 0)
 		goto st_gyro_common_probe_error;
 
+	gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
 	gdata->multiread_bit = gdata->sensor->multi_read_bit;
 	indio_dev->channels = gdata->sensor->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;

drivers/iio/magnetometer/st_magn_core.c

@@ -26,6 +26,8 @@
 #include <linux/iio/common/st_sensors.h>
 #include "st_magn.h"
 
+#define ST_MAGN_NUMBER_DATA_CHANNELS		3
+
 /* DEFAULT VALUE FOR SENSORS */
 #define ST_MAGN_DEFAULT_OUT_X_L_ADDR		0X04
 #define ST_MAGN_DEFAULT_OUT_Y_L_ADDR		0X08
@@ -113,22 +115,34 @@
 #define ST_MAGN_2_OUT_Z_L_ADDR			0x2c
 
 static const struct iio_chan_spec st_magn_16bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_X_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_Y_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_Z_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+			ST_MAGN_DEFAULT_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+			ST_MAGN_DEFAULT_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+			ST_MAGN_DEFAULT_OUT_Z_L_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
 static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_X_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_Y_L_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
-		ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_Z_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+			ST_MAGN_2_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+			ST_MAGN_2_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+			ST_MAGN_2_OUT_Z_L_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
@@ -344,6 +358,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
 	if (err < 0)
 		goto st_magn_common_probe_error;
 
+	mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
 	mdata->multiread_bit = mdata->sensor->multi_read_bit;
 	indio_dev->channels = mdata->sensor->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;

drivers/iio/pressure/Kconfig

+#
+# Pressure drivers
+#
+menu "Pressure Sensors"
+
+config IIO_ST_PRESS
+	tristate "STMicroelectronics pressures Driver"
+	depends on (I2C || SPI_MASTER) && SYSFS
+	select IIO_ST_SENSORS_CORE
+	select IIO_ST_PRESS_I2C if (I2C)
+	select IIO_ST_PRESS_SPI if (SPI_MASTER)
+	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+	help
+	  Say yes here to build support for STMicroelectronics pressures:
+	  LPS331AP.
+
+	  This driver can also be built as a module. If so, will be created
+	  these modules:
+	  - st_pressure (core functions for the driver [it is mandatory]);
+	  - st_pressure_i2c (necessary for the I2C devices [optional*]);
+	  - st_pressure_spi (necessary for the SPI devices [optional*]);
+
+	  (*) one of these is necessary to do something.
+
+config IIO_ST_PRESS_I2C
+	tristate
+	depends on IIO_ST_PRESS
+	depends on IIO_ST_SENSORS_I2C
+
+config IIO_ST_PRESS_SPI
+	tristate
+	depends on IIO_ST_PRESS
+	depends on IIO_ST_SENSORS_SPI
+
+endmenu

drivers/iio/pressure/Makefile

+#
+# Makefile for industrial I/O pressure drivers
+#
+
+obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
+st_pressure-y := st_pressure_core.o
+st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o
+
+obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o
+obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o

drivers/iio/pressure/st_pressure.h

+/*
+ * STMicroelectronics pressures driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_PRESS_H
+#define ST_PRESS_H
+
+#include <linux/types.h>
+#include <linux/iio/common/st_sensors.h>
+
+#define LPS331AP_PRESS_DEV_NAME		"lps331ap"
+
+int st_press_common_probe(struct iio_dev *indio_dev);
+void st_press_common_remove(struct iio_dev *indio_dev);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_press_allocate_ring(struct iio_dev *indio_dev);
+void st_press_deallocate_ring(struct iio_dev *indio_dev);
+int st_press_trig_set_state(struct iio_trigger *trig, bool state);
+#define ST_PRESS_TRIGGER_SET_STATE (&st_press_trig_set_state)
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_press_allocate_ring(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+static inline void st_press_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+#define ST_PRESS_TRIGGER_SET_STATE NULL
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_PRESS_H */

drivers/iio/pressure/st_pressure_buffer.c

+/*
+ * STMicroelectronics pressures driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_pressure.h"
+
+int st_press_trig_set_state(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+
+	return st_sensors_set_dataready_irq(indio_dev, state);
+}
+
+static int st_press_buffer_preenable(struct iio_dev *indio_dev)
+{
+	int err;
+
+	err = st_sensors_set_enable(indio_dev, true);
+	if (err < 0)
+		goto st_press_set_enable_error;
+
+	err = iio_sw_buffer_preenable(indio_dev);
+
+st_press_set_enable_error:
+	return err;
+}
+
+static int st_press_buffer_postenable(struct iio_dev *indio_dev)
+{
+	int err;
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+
+	pdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+	if (pdata->buffer_data == NULL) {
+		err = -ENOMEM;
+		goto allocate_memory_error;
+	}
+
+	err = iio_triggered_buffer_postenable(indio_dev);
+	if (err < 0)
+		goto st_press_buffer_postenable_error;
+
+	return err;
+
+st_press_buffer_postenable_error:
+	kfree(pdata->buffer_data);
+allocate_memory_error:
+	return err;
+}
+
+static int st_press_buffer_predisable(struct iio_dev *indio_dev)
+{
+	int err;
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+
+	err = iio_triggered_buffer_predisable(indio_dev);
+	if (err < 0)
+		goto st_press_buffer_predisable_error;
+
+	err = st_sensors_set_enable(indio_dev, false);
+
+st_press_buffer_predisable_error:
+	kfree(pdata->buffer_data);
+	return err;
+}
+
+static const struct iio_buffer_setup_ops st_press_buffer_setup_ops = {
+	.preenable = &st_press_buffer_preenable,
+	.postenable = &st_press_buffer_postenable,
+	.predisable = &st_press_buffer_predisable,
+};
+
+int st_press_allocate_ring(struct iio_dev *indio_dev)
+{
+	return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		&st_sensors_trigger_handler, &st_press_buffer_setup_ops);
+}
+
+void st_press_deallocate_ring(struct iio_dev *indio_dev)
+{
+	iio_triggered_buffer_cleanup(indio_dev);
+}
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics pressures buffer");
+MODULE_LICENSE("GPL v2");

drivers/iio/pressure/st_pressure_core.c

+/*
+ * STMicroelectronics pressures driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/buffer.h>
+#include <asm/unaligned.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_pressure.h"
+
+#define ST_PRESS_MBAR_TO_KPASCAL(x)		(x * 10)
+#define ST_PRESS_NUMBER_DATA_CHANNELS		1
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_PRESS_DEFAULT_OUT_XL_ADDR		0x28
+#define ST_TEMP_DEFAULT_OUT_L_ADDR		0x2b
+
+/* FULLSCALE */
+#define ST_PRESS_FS_AVL_1260MB			1260
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_PRESS_1_WAI_EXP			0xbb
+#define ST_PRESS_1_ODR_ADDR			0x20
+#define ST_PRESS_1_ODR_MASK			0x70
+#define ST_PRESS_1_ODR_AVL_1HZ_VAL		0x01
+#define ST_PRESS_1_ODR_AVL_7HZ_VAL		0x05
+#define ST_PRESS_1_ODR_AVL_13HZ_VAL		0x06
+#define ST_PRESS_1_ODR_AVL_25HZ_VAL		0x07
+#define ST_PRESS_1_PW_ADDR			0x20
+#define ST_PRESS_1_PW_MASK			0x80
+#define ST_PRESS_1_FS_ADDR			0x23
+#define ST_PRESS_1_FS_MASK			0x30
+#define ST_PRESS_1_FS_AVL_1260_VAL		0x00
+#define ST_PRESS_1_FS_AVL_1260_GAIN		ST_PRESS_MBAR_TO_KPASCAL(244141)
+#define ST_PRESS_1_FS_AVL_TEMP_GAIN		2083000
+#define ST_PRESS_1_BDU_ADDR			0x20
+#define ST_PRESS_1_BDU_MASK			0x04
+#define ST_PRESS_1_DRDY_IRQ_ADDR		0x22
+#define ST_PRESS_1_DRDY_IRQ_MASK		0x04
+#define ST_PRESS_1_MULTIREAD_BIT		true
+#define ST_PRESS_1_TEMP_OFFSET			42500
+
+static const struct iio_chan_spec st_press_channels[] = {
+	ST_SENSORS_LSM_CHANNELS(IIO_PRESSURE,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 0, IIO_NO_MOD, 'u', IIO_LE, 24, 24,
+			ST_PRESS_DEFAULT_OUT_XL_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_TEMP,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
+						BIT(IIO_CHAN_INFO_OFFSET),
+			-1, 0, IIO_NO_MOD, 's', IIO_LE, 16, 16,
+			ST_TEMP_DEFAULT_OUT_L_ADDR),
+	IIO_CHAN_SOFT_TIMESTAMP(1)
+};
+
+static const struct st_sensors st_press_sensors[] = {
+	{
+		.wai = ST_PRESS_1_WAI_EXP,
+		.sensors_supported = {
+			[0] = LPS331AP_PRESS_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_press_channels,
+		.odr = {
+			.addr = ST_PRESS_1_ODR_ADDR,
+			.mask = ST_PRESS_1_ODR_MASK,
+			.odr_avl = {
+				{ 1, ST_PRESS_1_ODR_AVL_1HZ_VAL, },
+				{ 7, ST_PRESS_1_ODR_AVL_7HZ_VAL, },
+				{ 13, ST_PRESS_1_ODR_AVL_13HZ_VAL, },
+				{ 25, ST_PRESS_1_ODR_AVL_25HZ_VAL, },
+			},
+		},
+		.pw = {
+			.addr = ST_PRESS_1_PW_ADDR,
+			.mask = ST_PRESS_1_PW_MASK,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.fs = {
+			.addr = ST_PRESS_1_FS_ADDR,
+			.mask = ST_PRESS_1_FS_MASK,
+			.fs_avl = {
+				[0] = {
+					.num = ST_PRESS_FS_AVL_1260MB,
+					.value = ST_PRESS_1_FS_AVL_1260_VAL,
+					.gain = ST_PRESS_1_FS_AVL_1260_GAIN,
+					.gain2 = ST_PRESS_1_FS_AVL_TEMP_GAIN,
+				},
+			},
+		},
+		.bdu = {
+			.addr = ST_PRESS_1_BDU_ADDR,
+			.mask = ST_PRESS_1_BDU_MASK,
+		},
+		.drdy_irq = {
+			.addr = ST_PRESS_1_DRDY_IRQ_ADDR,
+			.mask = ST_PRESS_1_DRDY_IRQ_MASK,
+		},
+		.multi_read_bit = ST_PRESS_1_MULTIREAD_BIT,
+		.bootime = 2,
+	},
+};
+
+static int st_press_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *ch, int *val,
+							int *val2, long mask)
+{
+	int err;
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		err = st_sensors_read_info_raw(indio_dev, ch, val);
+		if (err < 0)
+			goto read_error;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+
+		switch (ch->type) {
+		case IIO_PRESSURE:
+			*val2 = pdata->current_fullscale->gain;
+			break;
+		case IIO_TEMP:
+			*val2 = pdata->current_fullscale->gain2;
+			break;
+		default:
+			err = -EINVAL;
+			goto read_error;
+		}
+
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OFFSET:
+		switch (ch->type) {
+		case IIO_TEMP:
+			*val = 425;
+			*val2 = 10;
+			break;
+		default:
+			err = -EINVAL;
+			goto read_error;
+		}
+
+		return IIO_VAL_FRACTIONAL;
+	default:
+		return -EINVAL;
+	}
+
+read_error:
+	return err;
+}
+
+static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
+static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
+
+static struct attribute *st_press_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group st_press_attribute_group = {
+	.attrs = st_press_attributes,
+};
+
+static const struct iio_info press_info = {
+	.driver_module = THIS_MODULE,
+	.attrs = &st_press_attribute_group,
+	.read_raw = &st_press_read_raw,
+};
+
+#ifdef CONFIG_IIO_TRIGGER
+static const struct iio_trigger_ops st_press_trigger_ops = {
+	.owner = THIS_MODULE,
+	.set_trigger_state = ST_PRESS_TRIGGER_SET_STATE,
+};
+#define ST_PRESS_TRIGGER_OPS (&st_press_trigger_ops)
+#else
+#define ST_PRESS_TRIGGER_OPS NULL
+#endif
+
+int st_press_common_probe(struct iio_dev *indio_dev)
+{
+	int err;
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &press_info;
+
+	err = st_sensors_check_device_support(indio_dev,
+				ARRAY_SIZE(st_press_sensors), st_press_sensors);
+	if (err < 0)
+		goto st_press_common_probe_error;
+
+	pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
+	pdata->multiread_bit = pdata->sensor->multi_read_bit;
+	indio_dev->channels = pdata->sensor->ch;
+	indio_dev->num_channels = ARRAY_SIZE(st_press_channels);
+
+	pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
+						&pdata->sensor->fs.fs_avl[0];
+	pdata->odr = pdata->sensor->odr.odr_avl[0].hz;
+
+	err = st_sensors_init_sensor(indio_dev);
+	if (err < 0)
+		goto st_press_common_probe_error;
+
+	if (pdata->get_irq_data_ready(indio_dev) > 0) {
+		err = st_press_allocate_ring(indio_dev);
+		if (err < 0)
+			goto st_press_common_probe_error;
+
+		err = st_sensors_allocate_trigger(indio_dev,
+							ST_PRESS_TRIGGER_OPS);
+		if (err < 0)
+			goto st_press_probe_trigger_error;
+	}
+
+	err = iio_device_register(indio_dev);
+	if (err)
+		goto st_press_device_register_error;
+
+	return err;
+
+st_press_device_register_error:
+	if (pdata->get_irq_data_ready(indio_dev) > 0)
+		st_sensors_deallocate_trigger(indio_dev);
+st_press_probe_trigger_error:
+	if (pdata->get_irq_data_ready(indio_dev) > 0)
+		st_press_deallocate_ring(indio_dev);
+st_press_common_probe_error:
+	return err;
+}
+EXPORT_SYMBOL(st_press_common_probe);
+
+void st_press_common_remove(struct iio_dev *indio_dev)
+{
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	if (pdata->get_irq_data_ready(indio_dev) > 0) {
+		st_sensors_deallocate_trigger(indio_dev);
+		st_press_deallocate_ring(indio_dev);
+	}
+	iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_press_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics pressures driver");
+MODULE_LICENSE("GPL v2");

drivers/iio/pressure/st_pressure_i2c.c

+/*
+ * STMicroelectronics pressures driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_i2c.h>
+#include "st_pressure.h"
+
+static int st_press_i2c_probe(struct i2c_client *client,
+						const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct st_sensor_data *pdata;
+	int err;
+
+	indio_dev = iio_device_alloc(sizeof(*pdata));
+	if (indio_dev == NULL) {
+		err = -ENOMEM;
+		goto iio_device_alloc_error;
+	}
+
+	pdata = iio_priv(indio_dev);
+	pdata->dev = &client->dev;
+
+	st_sensors_i2c_configure(indio_dev, client, pdata);
+
+	err = st_press_common_probe(indio_dev);
+	if (err < 0)
+		goto st_press_common_probe_error;
+
+	return 0;
+
+st_press_common_probe_error:
+	iio_device_free(indio_dev);
+iio_device_alloc_error:
+	return err;
+}
+
+static int st_press_i2c_remove(struct i2c_client *client)
+{
+	st_press_common_remove(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+static const struct i2c_device_id st_press_id_table[] = {
+	{ LPS331AP_PRESS_DEV_NAME },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, st_press_id_table);
+
+static struct i2c_driver st_press_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "st-press-i2c",
+	},
+	.probe = st_press_i2c_probe,
+	.remove = st_press_i2c_remove,
+	.id_table = st_press_id_table,
+};
+module_i2c_driver(st_press_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics pressures i2c driver");
+MODULE_LICENSE("GPL v2");

drivers/iio/pressure/st_pressure_spi.c

+/*
+ * STMicroelectronics pressures driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_spi.h>
+#include "st_pressure.h"
+
+static int st_press_spi_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct st_sensor_data *pdata;
+	int err;
+
+	indio_dev = iio_device_alloc(sizeof(*pdata));
+	if (indio_dev == NULL) {
+		err = -ENOMEM;
+		goto iio_device_alloc_error;
+	}
+
+	pdata = iio_priv(indio_dev);
+	pdata->dev = &spi->dev;
+
+	st_sensors_spi_configure(indio_dev, spi, pdata);
+
+	err = st_press_common_probe(indio_dev);
+	if (err < 0)
+		goto st_press_common_probe_error;
+
+	return 0;
+
+st_press_common_probe_error:
+	iio_device_free(indio_dev);
+iio_device_alloc_error:
+	return err;
+}
+
+static int st_press_spi_remove(struct spi_device *spi)
+{
+	st_press_common_remove(spi_get_drvdata(spi));
+
+	return 0;
+}
+
+static const struct spi_device_id st_press_id_table[] = {
+	{ LPS331AP_PRESS_DEV_NAME },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, st_press_id_table);
+
+static struct spi_driver st_press_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "st-press-spi",
+	},
+	.probe = st_press_spi_probe,
+	.remove = st_press_spi_remove,
+	.id_table = st_press_id_table,
+};
+module_spi_driver(st_press_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics pressures spi driver");
+MODULE_LICENSE("GPL v2");

drivers/iio/trigger/Kconfig

@@ -3,6 +3,15 @@
 #
 menu "Triggers - standalone"
 
+config IIO_INTERRUPT_TRIGGER
+	tristate "Generic interrupt trigger"
+	help
+	  Provides support for using an interrupt of any type as an IIO
+	  trigger.  This may be provided by a gpio driver for example.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called iio-trig-interrupt.
+
 config IIO_SYSFS_TRIGGER
 	tristate "SYSFS trigger"
 	depends on SYSFS

drivers/iio/trigger/Makefile

@@ -2,4 +2,5 @@
 # Makefile for triggers not associated with iio-devices
 #
 
+obj-$(CONFIG_IIO_INTERRUPT_TRIGGER) += iio-trig-interrupt.o
 obj-$(CONFIG_IIO_SYSFS_TRIGGER) += iio-trig-sysfs.o

drivers/iio/trigger/iio-trig-interrupt.c

+/*
+ * Industrial I/O - generic interrupt based trigger support
+ *
+ * Copyright (c) 2008-2013 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+
+struct iio_interrupt_trigger_info {
+	unsigned int irq;
+};
+
+static irqreturn_t iio_interrupt_trigger_poll(int irq, void *private)
+{
+	/* Timestamp not currently provided */
+	iio_trigger_poll(private, 0);
+	return IRQ_HANDLED;
+}
+
+static const struct iio_trigger_ops iio_interrupt_trigger_ops = {
+	.owner = THIS_MODULE,
+};
+
+static int iio_interrupt_trigger_probe(struct platform_device *pdev)
+{
+	struct iio_interrupt_trigger_info *trig_info;
+	struct iio_trigger *trig;
+	unsigned long irqflags;
+	struct resource *irq_res;
+	int irq, ret = 0;
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	if (irq_res == NULL)
+		return -ENODEV;
+
+	irqflags = (irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
+
+	irq = irq_res->start;
+
+	trig = iio_trigger_alloc("irqtrig%d", irq);
+	if (!trig) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL);
+	if (!trig_info) {
+		ret = -ENOMEM;
+		goto error_put_trigger;
+	}
+	iio_trigger_set_drvdata(trig, trig_info);
+	trig_info->irq = irq;
+	trig->ops = &iio_interrupt_trigger_ops;
+	ret = request_irq(irq, iio_interrupt_trigger_poll,
+			  irqflags, trig->name, trig);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"request IRQ-%d failed", irq);
+		goto error_free_trig_info;
+	}
+
+	ret = iio_trigger_register(trig);
+	if (ret)
+		goto error_release_irq;
+	platform_set_drvdata(pdev, trig);
+
+	return 0;
+
+/* First clean up the partly allocated trigger */
+error_release_irq:
+	free_irq(irq, trig);
+error_free_trig_info:
+	kfree(trig_info);
+error_put_trigger:
+	iio_trigger_put(trig);
+error_ret:
+	return ret;
+}
+
+static int iio_interrupt_trigger_remove(struct platform_device *pdev)
+{
+	struct iio_trigger *trig;
+	struct iio_interrupt_trigger_info *trig_info;
+
+	trig = platform_get_drvdata(pdev);
+	trig_info = iio_trigger_get_drvdata(trig);
+	iio_trigger_unregister(trig);
+	free_irq(trig_info->irq, trig);
+	kfree(trig_info);
+	iio_trigger_put(trig);
+
+	return 0;
+}
+
+static struct platform_driver iio_interrupt_trigger_driver = {
+	.probe = iio_interrupt_trigger_probe,
+	.remove = iio_interrupt_trigger_remove,
+	.driver = {
+		.name = "iio_interrupt_trigger",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(iio_interrupt_trigger_driver);
+
+MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
+MODULE_DESCRIPTION("Interrupt trigger for the iio subsystem");
+MODULE_LICENSE("GPL v2");

drivers/iio/trigger/iio-trig-sysfs.c

@@ -34,7 +34,7 @@ static ssize_t iio_sysfs_trig_add(struct device *dev,
 	int ret;
 	unsigned long input;
 
-	ret = strict_strtoul(buf, 10, &input);
+	ret = kstrtoul(buf, 10, &input);
 	if (ret)
 		return ret;
 	ret = iio_sysfs_trigger_probe(input);
@@ -53,7 +53,7 @@ static ssize_t iio_sysfs_trig_remove(struct device *dev,
 	int ret;
 	unsigned long input;
 
-	ret = strict_strtoul(buf, 10, &input);
+	ret = kstrtoul(buf, 10, &input);
 	if (ret)
 		return ret;
 	ret = iio_sysfs_trigger_remove(input);

drivers/staging/iio/adc/ad7606_par.c

@@ -112,8 +112,6 @@ static int ad7606_par_remove(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/staging/iio/adc/lpc32xx_adc.c

@@ -215,7 +215,6 @@ static int lpc32xx_adc_remove(struct platform_device *pdev)
 
 	iio_device_unregister(iodev);
 	free_irq(irq, info);
-	platform_set_drvdata(pdev, NULL);
 	clk_put(info->clk);
 	iounmap(info->adc_base);
 	iio_device_free(iodev);

drivers/staging/iio/adc/spear_adc.c

@@ -407,7 +407,6 @@ static int spear_adc_remove(struct platform_device *pdev)
 	struct spear_adc_info *info = iio_priv(iodev);
 
 	iio_device_unregister(iodev);
-	platform_set_drvdata(pdev, NULL);
 	clk_disable_unprepare(info->clk);
 	clk_put(info->clk);
 	iounmap(info->adc_base_spear6xx);
@@ -416,11 +415,13 @@ static int spear_adc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
 static const struct of_device_id spear_adc_dt_ids[] = {
 	{ .compatible = "st,spear600-adc", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, spear_adc_dt_ids);
+#endif
 
 static struct platform_driver spear_adc_driver = {
 	.probe		= spear_adc_probe,

drivers/staging/iio/trigger/Kconfig

@@ -12,12 +12,6 @@ config IIO_PERIODIC_RTC_TRIGGER
 	  Provides support for using periodic capable real time
 	  clocks as IIO triggers.
 
-config IIO_GPIO_TRIGGER
-	tristate "GPIO trigger"
-	depends on GPIOLIB
-	help
-	  Provides support for using GPIO pins as IIO triggers.
-
 config IIO_BFIN_TMR_TRIGGER
 	tristate "Blackfin TIMER trigger"
 	depends on BLACKFIN

drivers/staging/iio/trigger/Makefile

@@ -3,5 +3,4 @@
 #
 
 obj-$(CONFIG_IIO_PERIODIC_RTC_TRIGGER) += iio-trig-periodic-rtc.o
-obj-$(CONFIG_IIO_GPIO_TRIGGER) += iio-trig-gpio.o
 obj-$(CONFIG_IIO_BFIN_TMR_TRIGGER) += iio-trig-bfin-timer.o

drivers/staging/iio/trigger/iio-trig-gpio.c

-/*
- * Industrial I/O - gpio based trigger support
- *
- * Copyright (c) 2008 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * Currently this is more of a functioning proof of concept than a full
- * fledged trigger driver.
- *
- * TODO:
- *
- * Add board config elements to allow specification of startup settings.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
-
-static LIST_HEAD(iio_gpio_trigger_list);
-static DEFINE_MUTEX(iio_gpio_trigger_list_lock);
-
-struct iio_gpio_trigger_info {
-	struct mutex in_use;
-	unsigned int irq;
-};
-/*
- * Need to reference count these triggers and only enable gpio interrupts
- * as appropriate.
- */
-
-/* So what functionality do we want in here?... */
-/* set high / low as interrupt type? */
-
-static irqreturn_t iio_gpio_trigger_poll(int irq, void *private)
-{
-	/* Timestamp not currently provided */
-	iio_trigger_poll(private, 0);
-	return IRQ_HANDLED;
-}
-
-static const struct iio_trigger_ops iio_gpio_trigger_ops = {
-	.owner = THIS_MODULE,
-};
-
-static int iio_gpio_trigger_probe(struct platform_device *pdev)
-{
-	struct iio_gpio_trigger_info *trig_info;
-	struct iio_trigger *trig, *trig2;
-	unsigned long irqflags;
-	struct resource *irq_res;
-	int irq, ret = 0, irq_res_cnt = 0;
-
-	do {
-		irq_res = platform_get_resource(pdev,
-				IORESOURCE_IRQ, irq_res_cnt);
-
-		if (irq_res == NULL) {
-			if (irq_res_cnt == 0)
-				dev_err(&pdev->dev, "No GPIO IRQs specified");
-			break;
-		}
-		irqflags = (irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
-
-		for (irq = irq_res->start; irq <= irq_res->end; irq++) {
-
-			trig = iio_trigger_alloc("irqtrig%d", irq);
-			if (!trig) {
-				ret = -ENOMEM;
-				goto error_free_completed_registrations;
-			}
-
-			trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL);
-			if (!trig_info) {
-				ret = -ENOMEM;
-				goto error_put_trigger;
-			}
-			iio_trigger_set_drvdata(trig, trig_info);
-			trig_info->irq = irq;
-			trig->ops = &iio_gpio_trigger_ops;
-			ret = request_irq(irq, iio_gpio_trigger_poll,
-					  irqflags, trig->name, trig);
-			if (ret) {
-				dev_err(&pdev->dev,
-					"request IRQ-%d failed", irq);
-				goto error_free_trig_info;
-			}
-
-			ret = iio_trigger_register(trig);
-			if (ret)
-				goto error_release_irq;
-
-			list_add_tail(&trig->alloc_list,
-					&iio_gpio_trigger_list);
-		}
-
-		irq_res_cnt++;
-	} while (irq_res != NULL);
-
-
-	return 0;
-
-/* First clean up the partly allocated trigger */
-error_release_irq:
-	free_irq(irq, trig);
-error_free_trig_info:
-	kfree(trig_info);
-error_put_trigger:
-	iio_trigger_put(trig);
-error_free_completed_registrations:
-	/* The rest should have been added to the iio_gpio_trigger_list */
-	list_for_each_entry_safe(trig,
-				 trig2,
-				 &iio_gpio_trigger_list,
-				 alloc_list) {
-		trig_info = iio_trigger_get_drvdata(trig);
-		free_irq(gpio_to_irq(trig_info->irq), trig);
-		kfree(trig_info);
-		iio_trigger_unregister(trig);
-	}
-
-	return ret;
-}
-
-static int iio_gpio_trigger_remove(struct platform_device *pdev)
-{
-	struct iio_trigger *trig, *trig2;
-	struct iio_gpio_trigger_info *trig_info;
-
-	mutex_lock(&iio_gpio_trigger_list_lock);
-	list_for_each_entry_safe(trig,
-				 trig2,
-				 &iio_gpio_trigger_list,
-				 alloc_list) {
-		trig_info = iio_trigger_get_drvdata(trig);
-		iio_trigger_unregister(trig);
-		free_irq(trig_info->irq, trig);
-		kfree(trig_info);
-		iio_trigger_put(trig);
-	}
-	mutex_unlock(&iio_gpio_trigger_list_lock);
-
-	return 0;
-}
-
-static struct platform_driver iio_gpio_trigger_driver = {
-	.probe = iio_gpio_trigger_probe,
-	.remove = iio_gpio_trigger_remove,
-	.driver = {
-		.name = "iio_gpio_trigger",
-		.owner = THIS_MODULE,
-	},
-};
-
-module_platform_driver(iio_gpio_trigger_driver);
-
-MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
-MODULE_DESCRIPTION("Example gpio trigger for the iio subsystem");
-MODULE_LICENSE("GPL v2");

include/linux/iio/common/st_sensors.h

@@ -24,14 +24,10 @@
 #define ST_SENSORS_FULLSCALE_AVL_MAX		10
 
 #define ST_SENSORS_NUMBER_ALL_CHANNELS		4
-#define ST_SENSORS_NUMBER_DATA_CHANNELS		3
 #define ST_SENSORS_ENABLE_ALL_AXIS		0x07
-#define ST_SENSORS_BYTE_FOR_CHANNEL		2
 #define ST_SENSORS_SCAN_X			0
 #define ST_SENSORS_SCAN_Y			1
 #define ST_SENSORS_SCAN_Z			2
-#define ST_SENSORS_DEFAULT_12_REALBITS		12
-#define ST_SENSORS_DEFAULT_16_REALBITS		16
 #define ST_SENSORS_DEFAULT_POWER_ON_VALUE	0x01
 #define ST_SENSORS_DEFAULT_POWER_OFF_VALUE	0x00
 #define ST_SENSORS_DEFAULT_WAI_ADDRESS		0x0f
@@ -42,20 +38,20 @@
 #define ST_SENSORS_MAX_NAME			17
 #define ST_SENSORS_MAX_4WAI			7
 
-#define ST_SENSORS_LSM_CHANNELS(device_type, index, mod, endian, bits, addr) \
+#define ST_SENSORS_LSM_CHANNELS(device_type, mask, index, mod, \
+					ch2, s, endian, rbits, sbits, addr) \
 { \
 	.type = device_type, \
-	.modified = 1, \
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
-			BIT(IIO_CHAN_INFO_SCALE), \
+	.modified = mod, \
+	.info_mask_separate = mask, \
 	.scan_index = index, \
-	.channel2 = mod, \
+	.channel2 = ch2, \
 	.address = addr, \
 	.scan_type = { \
-		.sign = 's', \
-		.realbits = bits, \
-		.shift = 16 - bits, \
-		.storagebits = 16, \
+		.sign = s, \
+		.realbits = rbits, \
+		.shift = sbits - rbits, \
+		.storagebits = sbits, \
 		.endianness = endian, \
 	}, \
 }
@@ -204,6 +200,7 @@ struct st_sensors {
  * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
  * @buffer_data: Data used by buffer part.
  * @odr: Output data rate of the sensor [Hz].
+ * num_data_channels: Number of data channels used in buffer.
  * @get_irq_data_ready: Function to get the IRQ used for data ready signal.
  * @tf: Transfer function structure used by I/O operations.
  * @tb: Transfer buffers and mutex used by I/O operations.
@@ -220,6 +217,7 @@ struct st_sensor_data {
 	char *buffer_data;
 
 	unsigned int odr;
+	unsigned int num_data_channels;
 
 	unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev);
 

include/linux/iio/frequency/adf4350.h

 /*
  * ADF4350/ADF4351 SPI PLL driver
  *
- * Copyright 2012 Analog Devices Inc.
+ * Copyright 2012-2013 Analog Devices Inc.
  *
  * Licensed under the GPL-2.
  */
@@ -41,7 +41,7 @@
 #define ADF4350_REG2_RDIV2_EN			(1 << 24)
 #define ADF4350_REG2_RMULT2_EN			(1 << 25)
 #define ADF4350_REG2_MUXOUT(x)			((x) << 26)
-#define ADF4350_REG2_NOISE_MODE(x)		((x) << 29)
+#define ADF4350_REG2_NOISE_MODE(x)		(((unsigned)(x)) << 29)
 #define ADF4350_MUXOUT_THREESTATE		0
 #define ADF4350_MUXOUT_DVDD			1
 #define ADF4350_MUXOUT_GND			2