Commit 4712542b authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

[TG3]: Jumbo frames and FTQ reset patch.

1. Set extended packet length bit in phy register 0x18 shadow register 0
on all chips that support jumbo frames (i.e. all chips except 5705 and
its variants). Jumbo frame reception is less reliable (more CRC errors)
if this bit is not set. This bit can be set regardless of the current
MTU setting.


2. Remove FTQ reset during chip init. This is the best fix for the ASF
race condition problem that I mentioned a few months ago. The FTQ reset
is redundant as it is already reset during GRC reset.
parent dc5178fa
...@@ -643,7 +643,14 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp) ...@@ -643,7 +643,14 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8200); tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8200);
tg3_writephy(tp, 0x16, 0x0000); tg3_writephy(tp, 0x16, 0x0000);
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400); if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
/* Set Extended packet length bit for jumbo frames */
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4400);
}
else {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
}
tg3_writephy(tp, MII_TG3_CTRL, phy9_orig); tg3_writephy(tp, MII_TG3_CTRL, phy9_orig);
...@@ -699,6 +706,15 @@ static int tg3_phy_reset(struct tg3 *tp, int force) ...@@ -699,6 +706,15 @@ static int tg3_phy_reset(struct tg3 *tp, int force)
tg3_writephy(tp, 0x1c, 0x8d68); tg3_writephy(tp, 0x1c, 0x8d68);
tg3_writephy(tp, 0x1c, 0x8d68); tg3_writephy(tp, 0x1c, 0x8d68);
} }
/* Set Extended packet length bit (bit 14) on all chips that */
/* support jumbo frames */
if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401 ||
(tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411) {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
}
else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4400);
}
tg3_phy_set_wirespeed(tp); tg3_phy_set_wirespeed(tp);
return 0; return 0;
} }
...@@ -1190,7 +1206,8 @@ static int tg3_init_5401phy_dsp(struct tg3 *tp) ...@@ -1190,7 +1206,8 @@ static int tg3_init_5401phy_dsp(struct tg3 *tp)
int err; int err;
/* Turn off tap power management. */ /* Turn off tap power management. */
err = tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c20); /* Set Extended packet length bit */
err = tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
err |= tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x0012); err |= tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x0012);
err |= tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x1804); err |= tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x1804);
...@@ -4644,6 +4661,8 @@ static int tg3_reset_hw(struct tg3 *tp) ...@@ -4644,6 +4661,8 @@ static int tg3_reset_hw(struct tg3 *tp)
return -ENODEV; return -ENODEV;
} }
#if 0 /* Remove FTQ reset because it is redundant and can cause */
/* race condition with ASF */
tw32(FTQ_RESET, 0xffffffff); tw32(FTQ_RESET, 0xffffffff);
tw32(FTQ_RESET, 0x00000000); tw32(FTQ_RESET, 0x00000000);
for (i = 0; i < 2000; i++) { for (i = 0; i < 2000; i++) {
...@@ -4656,6 +4675,7 @@ static int tg3_reset_hw(struct tg3 *tp) ...@@ -4656,6 +4675,7 @@ static int tg3_reset_hw(struct tg3 *tp)
tp->dev->name); tp->dev->name);
return -ENODEV; return -ENODEV;
} }
#endif
/* Clear statistics/status block in chip, and status block in ram. */ /* Clear statistics/status block in chip, and status block in ram. */
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) { if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
...@@ -6518,7 +6538,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp) ...@@ -6518,7 +6538,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
} }
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) { if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00); tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c00);
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x201f); tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x201f);
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x2aaa); tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x2aaa);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment