Commit 4c4a5c99 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC late updates from Olof Johansson:
 "This is some material that we picked up into our tree late. Most of it
  are smaller fixes and additions, some defconfig updates due to recent
  development, etc.

  Code-wise the largest portion is a series of PM updates for the at91
  platform, and those have been in linux-next a while through the at91
  tree before we picked them up"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  arm64: dts: sprd: Add clock properties for serial devices
  Opt out of scripts/get_maintainer.pl
  ARM: ixp4xx: Remove duplicated include from common.c
  soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe
  arm64: tegra: Disable XUSB support on Jetson TX2
  arm64: tegra: Enable SMMU translation for PCI on Tegra186
  arm64: tegra: Fix insecure SMMU users for Tegra186
  arm64: tegra: Select ARM_GIC_PM
  amba: tegra-ahb: Mark PM functions as __maybe_unused
  ARM: dts: logicpd-som-lv: Fix MMC1 card detect
  ARM: mvebu: drop return from void function
  ARM: mvebu: prefix coprocessor operand with p
  ARM: mvebu: drop unnecessary label
  ARM: mvebu: fix a leaked reference by adding missing of_node_put
  ARM: socfpga_defconfig: enable LTC2497
  ARM: mvebu: kirkwood: remove error message when retrieving mac address
  ARM: at91: sama5: make ov2640 as a module
  ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled
  ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM
  soc/fsl/qe: Fix an error code in qe_pin_request()
  ...
parents 86a78a8b 15d574fb
Christoph Hellwig <hch@lst.de> Christoph Hellwig <hch@lst.de>
Marc Gonzalez <marc.w.gonzalez@free.fr>
...@@ -25,6 +25,7 @@ compatible: must be one of: ...@@ -25,6 +25,7 @@ compatible: must be one of:
o "atmel,at91sam9n12" o "atmel,at91sam9n12"
o "atmel,at91sam9rl" o "atmel,at91sam9rl"
o "atmel,at91sam9xe" o "atmel,at91sam9xe"
o "microchip,sam9x60"
* "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
SoC family: SoC family:
o "atmel,sama5d2" shall be extended with the specific SoC compatible: o "atmel,sama5d2" shall be extended with the specific SoC compatible:
......
...@@ -153,7 +153,7 @@ &mmc1 { ...@@ -153,7 +153,7 @@ &mmc1 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>; pinctrl-0 = <&mmc1_pins>;
wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */ cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* gpio_110 */
vmmc-supply = <&vmmc1>; vmmc-supply = <&vmmc1>;
bus-width = <4>; bus-width = <4>;
cap-power-off-card; cap-power-off-card;
......
...@@ -150,7 +150,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y ...@@ -150,7 +150,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA=y
CONFIG_VIDEO_ATMEL_ISI=y CONFIG_VIDEO_ATMEL_ISI=y
CONFIG_SOC_CAMERA_OV2640=y CONFIG_SOC_CAMERA_OV2640=m
CONFIG_DRM=y CONFIG_DRM=y
CONFIG_DRM_ATMEL_HLCDC=y CONFIG_DRM_ATMEL_HLCDC=y
CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_SIMPLE=y
......
...@@ -21,7 +21,6 @@ CONFIG_NEON=y ...@@ -21,7 +21,6 @@ CONFIG_NEON=y
CONFIG_OPROFILE=y CONFIG_OPROFILE=y
CONFIG_MODULES=y CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
CONFIG_NET=y CONFIG_NET=y
CONFIG_PACKET=y CONFIG_PACKET=y
...@@ -128,6 +127,8 @@ CONFIG_RTC_DRV_DS1307=y ...@@ -128,6 +127,8 @@ CONFIG_RTC_DRV_DS1307=y
CONFIG_DMADEVICES=y CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y CONFIG_PL330_DMA=y
CONFIG_DMATEST=m CONFIG_DMATEST=m
CONFIG_IIO=y
CONFIG_LTC2497=y
CONFIG_FPGA=y CONFIG_FPGA=y
CONFIG_FPGA_MGR_SOCFPGA=y CONFIG_FPGA_MGR_SOCFPGA=y
CONFIG_FPGA_MGR_SOCFPGA_A10=y CONFIG_FPGA_MGR_SOCFPGA_A10=y
......
...@@ -21,7 +21,6 @@ config SOC_SAMA5D2 ...@@ -21,7 +21,6 @@ config SOC_SAMA5D2
depends on ARCH_MULTI_V7 depends on ARCH_MULTI_V7
select SOC_SAMA5 select SOC_SAMA5
select CACHE_L2X0 select CACHE_L2X0
select HAVE_FB_ATMEL
select HAVE_AT91_UTMI select HAVE_AT91_UTMI
select HAVE_AT91_USB_CLK select HAVE_AT91_USB_CLK
select HAVE_AT91_H32MX select HAVE_AT91_H32MX
...@@ -36,7 +35,6 @@ config SOC_SAMA5D3 ...@@ -36,7 +35,6 @@ config SOC_SAMA5D3
bool "SAMA5D3 family" bool "SAMA5D3 family"
depends on ARCH_MULTI_V7 depends on ARCH_MULTI_V7
select SOC_SAMA5 select SOC_SAMA5
select HAVE_FB_ATMEL
select HAVE_AT91_UTMI select HAVE_AT91_UTMI
select HAVE_AT91_SMD select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK select HAVE_AT91_USB_CLK
...@@ -50,7 +48,6 @@ config SOC_SAMA5D4 ...@@ -50,7 +48,6 @@ config SOC_SAMA5D4
depends on ARCH_MULTI_V7 depends on ARCH_MULTI_V7
select SOC_SAMA5 select SOC_SAMA5
select CACHE_L2X0 select CACHE_L2X0
select HAVE_FB_ATMEL
select HAVE_AT91_UTMI select HAVE_AT91_UTMI
select HAVE_AT91_SMD select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK select HAVE_AT91_USB_CLK
......
...@@ -32,3 +32,21 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9") ...@@ -32,3 +32,21 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
.init_machine = at91sam9_init, .init_machine = at91sam9_init,
.dt_compat = at91_dt_board_compat, .dt_compat = at91_dt_board_compat,
MACHINE_END MACHINE_END
static void __init sam9x60_init(void)
{
of_platform_default_populate(NULL, NULL, NULL);
sam9x60_pm_init();
}
static const char *const sam9x60_dt_board_compat[] __initconst = {
"microchip,sam9x60",
NULL
};
DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
/* Maintainer: Microchip */
.init_machine = sam9x60_init,
.dt_compat = sam9x60_dt_board_compat,
MACHINE_END
...@@ -14,11 +14,13 @@ ...@@ -14,11 +14,13 @@
#ifdef CONFIG_PM #ifdef CONFIG_PM
extern void __init at91rm9200_pm_init(void); extern void __init at91rm9200_pm_init(void);
extern void __init at91sam9_pm_init(void); extern void __init at91sam9_pm_init(void);
extern void __init sam9x60_pm_init(void);
extern void __init sama5_pm_init(void); extern void __init sama5_pm_init(void);
extern void __init sama5d2_pm_init(void); extern void __init sama5d2_pm_init(void);
#else #else
static inline void __init at91rm9200_pm_init(void) { } static inline void __init at91rm9200_pm_init(void) { }
static inline void __init at91sam9_pm_init(void) { } static inline void __init at91sam9_pm_init(void) { }
static inline void __init sam9x60_pm_init(void) { }
static inline void __init sama5_pm_init(void) { } static inline void __init sama5_pm_init(void) { }
static inline void __init sama5d2_pm_init(void) { } static inline void __init sama5d2_pm_init(void) { }
#endif #endif
......
This diff is collapsed.
...@@ -50,15 +50,6 @@ tmp2 .req r5 ...@@ -50,15 +50,6 @@ tmp2 .req r5
beq 1b beq 1b
.endm .endm
/*
* Wait until PLLA has locked.
*/
.macro wait_pllalock
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKA
beq 1b
.endm
/* /*
* Put the processor to enter the idle state * Put the processor to enter the idle state
*/ */
...@@ -178,11 +169,46 @@ ENDPROC(at91_backup_mode) ...@@ -178,11 +169,46 @@ ENDPROC(at91_backup_mode)
orr tmp1, tmp1, #AT91_PMC_KEY orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR] str tmp1, [pmc, #AT91_CKGR_MOR]
/* Save RC oscillator state */
ldr tmp1, [pmc, #AT91_PMC_SR]
str tmp1, .saved_osc_status
tst tmp1, #AT91_PMC_MOSCRCS
bne 1f
/* Turn off RC oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCRCEN
bic tmp1, tmp1, #AT91_PMC_KEY_MASK
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Wait main RC disabled done */
2: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCRCS
bne 2b
/* Wait for interrupt */ /* Wait for interrupt */
at91_cpu_idle 1: at91_cpu_idle
/* Turn on the crystal oscillator */ /* Restore RC oscillator state */
ldr tmp1, .saved_osc_status
tst tmp1, #AT91_PMC_MOSCRCS
beq 4f
/* Turn on RC oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR] ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCRCEN
bic tmp1, tmp1, #AT91_PMC_KEY_MASK
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Wait main RC stabilization */
3: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCRCS
beq 3b
/* Turn on the crystal oscillator */
4: ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCEN orr tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR] str tmp1, [pmc, #AT91_CKGR_MOR]
...@@ -197,8 +223,26 @@ ENDPROC(at91_backup_mode) ...@@ -197,8 +223,26 @@ ENDPROC(at91_backup_mode)
.macro at91_pm_ulp1_mode .macro at91_pm_ulp1_mode
ldr pmc, .pmc_base ldr pmc, .pmc_base
/* Switch the main clock source to 12-MHz RC oscillator */ /* Save RC oscillator state and check if it is enabled. */
ldr tmp1, [pmc, #AT91_PMC_SR]
str tmp1, .saved_osc_status
tst tmp1, #AT91_PMC_MOSCRCS
bne 2f
/* Enable RC oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR] ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCRCEN
bic tmp1, tmp1, #AT91_PMC_KEY_MASK
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Wait main RC stabilization */
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCRCS
beq 1b
/* Switch the main clock source to 12-MHz RC oscillator */
2: ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCSEL bic tmp1, tmp1, #AT91_PMC_MOSCSEL
bic tmp1, tmp1, #AT91_PMC_KEY_MASK bic tmp1, tmp1, #AT91_PMC_KEY_MASK
orr tmp1, tmp1, #AT91_PMC_KEY orr tmp1, tmp1, #AT91_PMC_KEY
...@@ -262,6 +306,25 @@ ENDPROC(at91_backup_mode) ...@@ -262,6 +306,25 @@ ENDPROC(at91_backup_mode)
str tmp1, [pmc, #AT91_PMC_MCKR] str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy wait_mckrdy
/* Restore RC oscillator state */
ldr tmp1, .saved_osc_status
tst tmp1, #AT91_PMC_MOSCRCS
bne 3f
/* Disable RC oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCRCEN
bic tmp1, tmp1, #AT91_PMC_KEY_MASK
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Wait RC oscillator disable done */
4: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCRCS
bne 4b
3:
.endm .endm
ENTRY(at91_ulp_mode) ENTRY(at91_ulp_mode)
...@@ -279,14 +342,6 @@ ENTRY(at91_ulp_mode) ...@@ -279,14 +342,6 @@ ENTRY(at91_ulp_mode)
wait_mckrdy wait_mckrdy
/* Save PLLA setting and disable it */
ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
str tmp1, .saved_pllar
mov tmp1, #AT91_PMC_PLLCOUNT
orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
str tmp1, [pmc, #AT91_CKGR_PLLAR]
ldr r0, .pm_mode ldr r0, .pm_mode
cmp r0, #AT91_PM_ULP1 cmp r0, #AT91_PM_ULP1
beq ulp1_mode beq ulp1_mode
...@@ -301,18 +356,6 @@ ulp1_mode: ...@@ -301,18 +356,6 @@ ulp1_mode:
ulp_exit: ulp_exit:
ldr pmc, .pmc_base ldr pmc, .pmc_base
/* Restore PLLA setting */
ldr tmp1, .saved_pllar
str tmp1, [pmc, #AT91_CKGR_PLLAR]
tst tmp1, #(AT91_PMC_MUL & 0xff0000)
bne 3f
tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
beq 4f
3:
wait_pllalock
4:
/* /*
* Restore master clock setting * Restore master clock setting
*/ */
...@@ -465,8 +508,6 @@ ENDPROC(at91_sramc_self_refresh) ...@@ -465,8 +508,6 @@ ENDPROC(at91_sramc_self_refresh)
.word 0 .word 0
.saved_mckr: .saved_mckr:
.word 0 .word 0
.saved_pllar:
.word 0
.saved_sam9_lpr: .saved_sam9_lpr:
.word 0 .word 0
.saved_sam9_lpr1: .saved_sam9_lpr1:
...@@ -475,6 +516,8 @@ ENDPROC(at91_sramc_self_refresh) ...@@ -475,6 +516,8 @@ ENDPROC(at91_sramc_self_refresh)
.word 0 .word 0
.saved_sam9_mdr1: .saved_sam9_mdr1:
.word 0 .word 0
.saved_osc_status:
.word 0
ENTRY(at91_pm_suspend_in_sram_sz) ENTRY(at91_pm_suspend_in_sram_sz)
.word .-at91_pm_suspend_in_sram .word .-at91_pm_suspend_in_sram
...@@ -27,7 +27,6 @@ ...@@ -27,7 +27,6 @@
#include <linux/cpu.h> #include <linux/cpu.h>
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/sched_clock.h> #include <linux/sched_clock.h>
#include <linux/bitops.h>
#include <linux/irqchip/irq-ixp4xx.h> #include <linux/irqchip/irq-ixp4xx.h>
#include <linux/platform_data/timer-ixp4xx.h> #include <linux/platform_data/timer-ixp4xx.h>
#include <mach/udc.h> #include <mach/udc.h>
......
...@@ -136,7 +136,6 @@ static void __init i2c_quirk(void) ...@@ -136,7 +136,6 @@ static void __init i2c_quirk(void)
of_update_property(np, new_compat); of_update_property(np, new_compat);
} }
return;
} }
static void __init mvebu_dt_init(void) static void __init mvebu_dt_init(void)
......
...@@ -66,7 +66,7 @@ ENDPROC(ll_get_coherency_base) ...@@ -66,7 +66,7 @@ ENDPROC(ll_get_coherency_base)
* fabric registers * fabric registers
*/ */
ENTRY(ll_get_coherency_cpumask) ENTRY(ll_get_coherency_cpumask)
mrc 15, 0, r3, cr0, cr0, 5 mrc p15, 0, r3, cr0, cr0, 5
and r3, r3, #15 and r3, r3, #15
mov r2, #(1 << 24) mov r2, #(1 << 24)
lsl r3, r2, r3 lsl r3, r2, r3
......
...@@ -108,8 +108,6 @@ static void __init kirkwood_dt_eth_fixup(void) ...@@ -108,8 +108,6 @@ static void __init kirkwood_dt_eth_fixup(void)
clk_prepare_enable(clk); clk_prepare_enable(clk);
/* store MAC address register contents in local-mac-address */ /* store MAC address register contents in local-mac-address */
pr_err(FW_INFO "%pOF: local-mac-address is not set\n", np);
pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL); pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
if (!pmac) if (!pmac)
goto eth_fixup_no_mem; goto eth_fixup_no_mem;
......
...@@ -79,7 +79,7 @@ static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd) ...@@ -79,7 +79,7 @@ static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd)
static int __init mvebu_armada_pm_init(void) static int __init mvebu_armada_pm_init(void)
{ {
struct device_node *np; struct device_node *np;
struct device_node *gpio_ctrl_np; struct device_node *gpio_ctrl_np = NULL;
int ret = 0, i; int ret = 0, i;
if (!of_machine_is_compatible("marvell,axp-gp")) if (!of_machine_is_compatible("marvell,axp-gp"))
...@@ -126,18 +126,23 @@ static int __init mvebu_armada_pm_init(void) ...@@ -126,18 +126,23 @@ static int __init mvebu_armada_pm_init(void)
goto out; goto out;
} }
if (gpio_ctrl_np)
of_node_put(gpio_ctrl_np);
gpio_ctrl_np = args.np; gpio_ctrl_np = args.np;
pic_raw_gpios[i] = args.args[0]; pic_raw_gpios[i] = args.args[0];
} }
gpio_ctrl = of_iomap(gpio_ctrl_np, 0); gpio_ctrl = of_iomap(gpio_ctrl_np, 0);
if (!gpio_ctrl) if (!gpio_ctrl) {
return -ENOMEM; ret = -ENOMEM;
goto out;
}
mvebu_pm_suspend_init(mvebu_armada_pm_enter); mvebu_pm_suspend_init(mvebu_armada_pm_enter);
out: out:
of_node_put(np); of_node_put(np);
of_node_put(gpio_ctrl_np);
return ret; return ret;
} }
......
...@@ -16,7 +16,7 @@ ...@@ -16,7 +16,7 @@
ENTRY(armada_38x_scu_power_up) ENTRY(armada_38x_scu_power_up)
mrc p15, 4, r1, c15, c0 @ get SCU base address mrc p15, 4, r1, c15, c0 @ get SCU base address
orr r1, r1, #0x8 @ SCU CPU Power Status Register orr r1, r1, #0x8 @ SCU CPU Power Status Register
mrc 15, 0, r0, cr0, cr0, 5 @ get the CPU ID mrc p15, 0, r0, cr0, cr0, 5 @ get the CPU ID
and r0, r0, #15 and r0, r0, #15
add r1, r1, r0 add r1, r1, r0
mov r0, #0x0 mov r0, #0x0
...@@ -56,7 +56,6 @@ ENDPROC(armada_38x_cpu_resume) ...@@ -56,7 +56,6 @@ ENDPROC(armada_38x_cpu_resume)
/* The following code will be executed from SRAM */ /* The following code will be executed from SRAM */
ENTRY(mvebu_boot_wa_start) ENTRY(mvebu_boot_wa_start)
mvebu_boot_wa_start:
ARM_BE8(setend be) ARM_BE8(setend be)
adr r0, 1f adr r0, 1f
ldr r0, [r0] @ load the address of the ldr r0, [r0] @ load the address of the
......
...@@ -749,7 +749,7 @@ static void __init ams_delta_init(void) ...@@ -749,7 +749,7 @@ static void __init ams_delta_init(void)
ARRAY_SIZE(ams_delta_gpio_tables)); ARRAY_SIZE(ams_delta_gpio_tables));
leds_pdev = gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata); leds_pdev = gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
if (!IS_ERR(leds_pdev)) { if (!IS_ERR_OR_NULL(leds_pdev)) {
leds_gpio_table.dev_id = dev_name(&leds_pdev->dev); leds_gpio_table.dev_id = dev_name(&leds_pdev->dev);
gpiod_add_lookup_table(&leds_gpio_table); gpiod_add_lookup_table(&leds_gpio_table);
} }
......
...@@ -215,6 +215,7 @@ config ARCH_SYNQUACER ...@@ -215,6 +215,7 @@ config ARCH_SYNQUACER
config ARCH_TEGRA config ARCH_TEGRA
bool "NVIDIA Tegra SoC Family" bool "NVIDIA Tegra SoC Family"
select ARCH_HAS_RESET_CONTROLLER select ARCH_HAS_RESET_CONTROLLER
select ARM_GIC_PM
select CLKDEV_LOOKUP select CLKDEV_LOOKUP
select CLKSRC_MMIO select CLKSRC_MMIO
select TIMER_OF select TIMER_OF
......
...@@ -59,7 +59,7 @@ hda@3510000 { ...@@ -59,7 +59,7 @@ hda@3510000 {
}; };
padctl@3520000 { padctl@3520000 {
status = "okay"; status = "disabled";
avdd-pll-erefeut-supply = <&vdd_1v8_pll>; avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
avdd-usb-supply = <&vdd_3v3_sys>; avdd-usb-supply = <&vdd_3v3_sys>;
...@@ -137,7 +137,7 @@ usb3-0 { ...@@ -137,7 +137,7 @@ usb3-0 {
}; };
usb@3530000 { usb@3530000 {
status = "okay"; status = "disabled";
phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>, phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
<&{/padctl@3520000/pads/usb2/lanes/usb2-1}>, <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
......
...@@ -60,6 +60,7 @@ ethernet@2490000 { ...@@ -60,6 +60,7 @@ ethernet@2490000 {
clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref"; clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
resets = <&bpmp TEGRA186_RESET_EQOS>; resets = <&bpmp TEGRA186_RESET_EQOS>;
reset-names = "eqos"; reset-names = "eqos";
iommus = <&smmu TEGRA186_SID_EQOS>;
status = "disabled"; status = "disabled";
snps,write-requests = <1>; snps,write-requests = <1>;
...@@ -338,6 +339,7 @@ hda@3510000 { ...@@ -338,6 +339,7 @@ hda@3510000 {
<&bpmp TEGRA186_RESET_HDA2CODEC_2X>; <&bpmp TEGRA186_RESET_HDA2CODEC_2X>;
reset-names = "hda", "hda2hdmi", "hda2codec_2x"; reset-names = "hda", "hda2hdmi", "hda2codec_2x";
power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
iommus = <&smmu TEGRA186_SID_HDA>;
status = "disabled"; status = "disabled";
}; };
...@@ -671,6 +673,10 @@ pcie@10003000 { ...@@ -671,6 +673,10 @@ pcie@10003000 {
<&bpmp TEGRA186_RESET_PCIEXCLK>; <&bpmp TEGRA186_RESET_PCIEXCLK>;
reset-names = "afi", "pex", "pcie_x"; reset-names = "afi", "pex", "pcie_x";
iommus = <&smmu TEGRA186_SID_AFI>;
iommu-map = <0x0 &smmu TEGRA186_SID_AFI 0x1000>;
iommu-map-mask = <0x0>;
status = "disabled"; status = "disabled";
pci@1,0 { pci@1,0 {
...@@ -1158,6 +1164,7 @@ cpu@5 { ...@@ -1158,6 +1164,7 @@ cpu@5 {
bpmp: bpmp { bpmp: bpmp {
compatible = "nvidia,tegra186-bpmp"; compatible = "nvidia,tegra186-bpmp";
iommus = <&smmu TEGRA186_SID_BPMP>;
mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
TEGRA_HSP_DB_MASTER_BPMP>; TEGRA_HSP_DB_MASTER_BPMP>;
shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
......
...@@ -75,7 +75,9 @@ uart0: serial@0 { ...@@ -75,7 +75,9 @@ uart0: serial@0 {
"sprd,sc9836-uart"; "sprd,sc9836-uart";
reg = <0x0 0x100>; reg = <0x0 0x100>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ext_26m>; clock-names = "enable", "uart", "source";
clocks = <&apapb_gate CLK_UART0_EB>,
<&ap_clk CLK_UART0>, <&ext_26m>;
status = "disabled"; status = "disabled";
}; };
...@@ -84,7 +86,9 @@ uart1: serial@100000 { ...@@ -84,7 +86,9 @@ uart1: serial@100000 {
"sprd,sc9836-uart"; "sprd,sc9836-uart";
reg = <0x100000 0x100>; reg = <0x100000 0x100>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ext_26m>; clock-names = "enable", "uart", "source";
clocks = <&apapb_gate CLK_UART1_EB>,
<&ap_clk CLK_UART1>, <&ext_26m>;
status = "disabled"; status = "disabled";
}; };
...@@ -93,7 +97,9 @@ uart2: serial@200000 { ...@@ -93,7 +97,9 @@ uart2: serial@200000 {
"sprd,sc9836-uart"; "sprd,sc9836-uart";
reg = <0x200000 0x100>; reg = <0x200000 0x100>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ext_26m>; clock-names = "enable", "uart", "source";
clocks = <&apapb_gate CLK_UART2_EB>,
<&ap_clk CLK_UART2>, <&ext_26m>;
status = "disabled"; status = "disabled";
}; };
...@@ -102,7 +108,9 @@ uart3: serial@300000 { ...@@ -102,7 +108,9 @@ uart3: serial@300000 {
"sprd,sc9836-uart"; "sprd,sc9836-uart";
reg = <0x300000 0x100>; reg = <0x300000 0x100>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ext_26m>; clock-names = "enable", "uart", "source";
clocks = <&apapb_gate CLK_UART3_EB>,
<&ap_clk CLK_UART3>, <&ext_26m>;
status = "disabled"; status = "disabled";
}; };
}; };
......
...@@ -170,8 +170,7 @@ int tegra_ahb_enable_smmu(struct device_node *dn) ...@@ -170,8 +170,7 @@ int tegra_ahb_enable_smmu(struct device_node *dn)
EXPORT_SYMBOL(tegra_ahb_enable_smmu); EXPORT_SYMBOL(tegra_ahb_enable_smmu);
#endif #endif
#ifdef CONFIG_PM static int __maybe_unused tegra_ahb_suspend(struct device *dev)
static int tegra_ahb_suspend(struct device *dev)
{ {
int i; int i;
struct tegra_ahb *ahb = dev_get_drvdata(dev); struct tegra_ahb *ahb = dev_get_drvdata(dev);
...@@ -181,7 +180,7 @@ static int tegra_ahb_suspend(struct device *dev) ...@@ -181,7 +180,7 @@ static int tegra_ahb_suspend(struct device *dev)
return 0; return 0;
} }
static int tegra_ahb_resume(struct device *dev) static int __maybe_unused tegra_ahb_resume(struct device *dev)
{ {
int i; int i;
struct tegra_ahb *ahb = dev_get_drvdata(dev); struct tegra_ahb *ahb = dev_get_drvdata(dev);
...@@ -190,7 +189,6 @@ static int tegra_ahb_resume(struct device *dev) ...@@ -190,7 +189,6 @@ static int tegra_ahb_resume(struct device *dev)
gizmo_writel(ahb, ahb->ctx[i], tegra_ahb_gizmo[i]); gizmo_writel(ahb, ahb->ctx[i], tegra_ahb_gizmo[i]);
return 0; return 0;
} }
#endif
static UNIVERSAL_DEV_PM_OPS(tegra_ahb_pm, static UNIVERSAL_DEV_PM_OPS(tegra_ahb_pm,
tegra_ahb_suspend, tegra_ahb_suspend,
......
...@@ -179,8 +179,10 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index) ...@@ -179,8 +179,10 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
if (err < 0) if (err < 0)
goto err0; goto err0;
gc = gpio_to_chip(err); gc = gpio_to_chip(err);
if (WARN_ON(!gc)) if (WARN_ON(!gc)) {
err = -ENODEV;
goto err0; goto err0;
}
if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) { if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
pr_debug("%s: tried to get a non-qe pin\n", __func__); pr_debug("%s: tried to get a non-qe pin\n", __func__);
......
...@@ -385,8 +385,8 @@ static int ixp4xx_qmgr_probe(struct platform_device *pdev) ...@@ -385,8 +385,8 @@ static int ixp4xx_qmgr_probe(struct platform_device *pdev)
if (!res) if (!res)
return -ENODEV; return -ENODEV;
qmgr_regs = devm_ioremap_resource(dev, res); qmgr_regs = devm_ioremap_resource(dev, res);
if (!qmgr_regs) if (IS_ERR(qmgr_regs))
return -ENOMEM; return PTR_ERR(qmgr_regs);
irq1 = platform_get_irq(pdev, 0); irq1 = platform_get_irq(pdev, 0);
if (irq1 <= 0) if (irq1 <= 0)
......
...@@ -161,6 +161,7 @@ ...@@ -161,6 +161,7 @@
#define AT91_PMC_FSMR 0x70 /* Fast Startup Mode Register */ #define AT91_PMC_FSMR 0x70 /* Fast Startup Mode Register */
#define AT91_PMC_FSTT(n) BIT(n) #define AT91_PMC_FSTT(n) BIT(n)
#define AT91_PMC_RTTAL BIT(16)
#define AT91_PMC_RTCAL BIT(17) /* RTC Alarm Enable */ #define AT91_PMC_RTCAL BIT(17) /* RTC Alarm Enable */
#define AT91_PMC_USBAL BIT(18) /* USB Resume Enable */ #define AT91_PMC_USBAL BIT(18) /* USB Resume Enable */
#define AT91_PMC_SDMMC_CD BIT(19) /* SDMMC Card Detect Enable */ #define AT91_PMC_SDMMC_CD BIT(19) /* SDMMC Card Detect Enable */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment