Commit 51007004 authored by Chris Metcalf's avatar Chris Metcalf

arch/tile: use interrupt critical sections less

In general we want to avoid ever touching memory while within an
interrupt critical section, since the page fault path goes through
a different path from the hypervisor when in an interrupt critical
section, and we carefully decided with tilegx that we didn't need
to support this path in the kernel.  (On tilepro we did implement
that path as part of supporting atomic instructions in software.)

In practice we always need to touch the kernel stack, since that's
where we store the interrupt state before releasing the critical
section, but this change cleans up a few things.  The IRQ_ENABLE
macro is split up so that when we want to enable interrupts in a
deferred way (e.g. for cpu_idle or for interrupt return) we can
read the per-cpu enable mask before entering the critical section.
The cache-migration code is changed to use interrupt masking instead
of interrupt critical sections.  And, the interrupt-entry code is
changed so that we defer loading "tp" from per-cpu data until after
we have released the interrupt critical section.
Signed-off-by: default avatarChris Metcalf <cmetcalf@tilera.com>
parent 76e10d15
...@@ -28,10 +28,10 @@ ...@@ -28,10 +28,10 @@
*/ */
#if CHIP_HAS_AUX_PERF_COUNTERS() #if CHIP_HAS_AUX_PERF_COUNTERS()
#define LINUX_MASKABLE_INTERRUPTS_HI \ #define LINUX_MASKABLE_INTERRUPTS_HI \
(~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT))) (~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT)))
#else #else
#define LINUX_MASKABLE_INTERRUPTS_HI \ #define LINUX_MASKABLE_INTERRUPTS_HI \
(~(INT_MASK_HI(INT_PERF_COUNT))) (~(INT_MASK_HI(INT_PERF_COUNT)))
#endif #endif
#else #else
...@@ -90,6 +90,14 @@ ...@@ -90,6 +90,14 @@
__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, (unsigned long)(__m)); \ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, (unsigned long)(__m)); \
__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, (unsigned long)(__m>>32)); \ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, (unsigned long)(__m>>32)); \
} while (0) } while (0)
#define interrupt_mask_save_mask() \
(__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_0) | \
(((unsigned long long)__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_1))<<32))
#define interrupt_mask_restore_mask(mask) do { \
unsigned long long __m = (mask); \
__insn_mtspr(SPR_INTERRUPT_MASK_K_0, (unsigned long)(__m)); \
__insn_mtspr(SPR_INTERRUPT_MASK_K_1, (unsigned long)(__m>>32)); \
} while (0)
#else #else
#define interrupt_mask_set(n) \ #define interrupt_mask_set(n) \
__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (1UL << (n))) __insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (1UL << (n)))
...@@ -101,6 +109,10 @@ ...@@ -101,6 +109,10 @@
__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (mask)) __insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (mask))
#define interrupt_mask_reset_mask(mask) \ #define interrupt_mask_reset_mask(mask) \
__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (mask)) __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (mask))
#define interrupt_mask_save_mask() \
__insn_mfspr(SPR_INTERRUPT_MASK_K)
#define interrupt_mask_restore_mask(mask) \
__insn_mtspr(SPR_INTERRUPT_MASK_K, (mask))
#endif #endif
/* /*
...@@ -122,7 +134,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask); ...@@ -122,7 +134,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
/* Disable all interrupts, including NMIs. */ /* Disable all interrupts, including NMIs. */
#define arch_local_irq_disable_all() \ #define arch_local_irq_disable_all() \
interrupt_mask_set_mask(-1UL) interrupt_mask_set_mask(-1ULL)
/* Re-enable all maskable interrupts. */ /* Re-enable all maskable interrupts. */
#define arch_local_irq_enable() \ #define arch_local_irq_enable() \
...@@ -179,7 +191,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask); ...@@ -179,7 +191,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
#ifdef __tilegx__ #ifdef __tilegx__
#if INT_MEM_ERROR != 0 #if INT_MEM_ERROR != 0
# error Fix IRQ_DISABLED() macro # error Fix IRQS_DISABLED() macro
#endif #endif
/* Return 0 or 1 to indicate whether interrupts are currently disabled. */ /* Return 0 or 1 to indicate whether interrupts are currently disabled. */
...@@ -207,9 +219,10 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask); ...@@ -207,9 +219,10 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
mtspr SPR_INTERRUPT_MASK_SET_K, tmp mtspr SPR_INTERRUPT_MASK_SET_K, tmp
/* Enable interrupts. */ /* Enable interrupts. */
#define IRQ_ENABLE(tmp0, tmp1) \ #define IRQ_ENABLE_LOAD(tmp0, tmp1) \
GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \ GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
ld tmp0, tmp0; \ ld tmp0, tmp0
#define IRQ_ENABLE_APPLY(tmp0, tmp1) \
mtspr SPR_INTERRUPT_MASK_RESET_K, tmp0 mtspr SPR_INTERRUPT_MASK_RESET_K, tmp0
#else /* !__tilegx__ */ #else /* !__tilegx__ */
...@@ -253,17 +266,22 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask); ...@@ -253,17 +266,22 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp
/* Enable interrupts. */ /* Enable interrupts. */
#define IRQ_ENABLE(tmp0, tmp1) \ #define IRQ_ENABLE_LOAD(tmp0, tmp1) \
GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \ GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
{ \ { \
lw tmp0, tmp0; \ lw tmp0, tmp0; \
addi tmp1, tmp0, 4 \ addi tmp1, tmp0, 4 \
}; \ }; \
lw tmp1, tmp1; \ lw tmp1, tmp1
#define IRQ_ENABLE_APPLY(tmp0, tmp1) \
mtspr SPR_INTERRUPT_MASK_RESET_K_0, tmp0; \ mtspr SPR_INTERRUPT_MASK_RESET_K_0, tmp0; \
mtspr SPR_INTERRUPT_MASK_RESET_K_1, tmp1 mtspr SPR_INTERRUPT_MASK_RESET_K_1, tmp1
#endif #endif
#define IRQ_ENABLE(tmp0, tmp1) \
IRQ_ENABLE_LOAD(tmp0, tmp1); \
IRQ_ENABLE_APPLY(tmp0, tmp1)
/* /*
* Do the CPU's IRQ-state tracing from assembly code. We call a * Do the CPU's IRQ-state tracing from assembly code. We call a
* C function, but almost everywhere we do, we don't mind clobbering * C function, but almost everywhere we do, we don't mind clobbering
......
...@@ -100,8 +100,9 @@ STD_ENTRY(smp_nap) ...@@ -100,8 +100,9 @@ STD_ENTRY(smp_nap)
*/ */
STD_ENTRY(_cpu_idle) STD_ENTRY(_cpu_idle)
movei r1, 1 movei r1, 1
IRQ_ENABLE_LOAD(r2, r3)
mtspr INTERRUPT_CRITICAL_SECTION, r1 mtspr INTERRUPT_CRITICAL_SECTION, r1
IRQ_ENABLE(r2, r3) /* unmask, but still with ICS set */ IRQ_ENABLE_APPLY(r2, r3) /* unmask, but still with ICS set */
mtspr INTERRUPT_CRITICAL_SECTION, zero mtspr INTERRUPT_CRITICAL_SECTION, zero
.global _cpu_idle_nap .global _cpu_idle_nap
_cpu_idle_nap: _cpu_idle_nap:
......
...@@ -220,7 +220,9 @@ intvec_\vecname: ...@@ -220,7 +220,9 @@ intvec_\vecname:
* This routine saves just the first four registers, plus the * This routine saves just the first four registers, plus the
* stack context so we can do proper backtracing right away, * stack context so we can do proper backtracing right away,
* and defers to handle_interrupt to save the rest. * and defers to handle_interrupt to save the rest.
* The backtracer needs pc, ex1, lr, sp, r52, and faultnum. * The backtracer needs pc, ex1, lr, sp, r52, and faultnum,
* and needs sp set to its final location at the bottom of
* the stack frame.
*/ */
addli r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP) addli r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP)
wh64 r0 /* cache line 7 */ wh64 r0 /* cache line 7 */
...@@ -450,23 +452,6 @@ intvec_\vecname: ...@@ -450,23 +452,6 @@ intvec_\vecname:
push_reg r5, r52 push_reg r5, r52
st r52, r4 st r52, r4
/* Load tp with our per-cpu offset. */
#ifdef CONFIG_SMP
{
mfspr r20, SPR_SYSTEM_SAVE_K_0
moveli r21, hw2_last(__per_cpu_offset)
}
{
shl16insli r21, r21, hw1(__per_cpu_offset)
bfextu r20, r20, 0, LOG2_THREAD_SIZE-1
}
shl16insli r21, r21, hw0(__per_cpu_offset)
shl3add r20, r20, r21
ld tp, r20
#else
move tp, zero
#endif
/* /*
* If we will be returning to the kernel, we will need to * If we will be returning to the kernel, we will need to
* reset the interrupt masks to the state they had before. * reset the interrupt masks to the state they had before.
...@@ -489,6 +474,44 @@ intvec_\vecname: ...@@ -489,6 +474,44 @@ intvec_\vecname:
.endif .endif
st r21, r32 st r21, r32
/*
* we've captured enough state to the stack (including in
* particular our EX_CONTEXT state) that we can now release
* the interrupt critical section and replace it with our
* standard "interrupts disabled" mask value. This allows
* synchronous interrupts (and profile interrupts) to punch
* through from this point onwards.
*
* It's important that no code before this point touch memory
* other than our own stack (to keep the invariant that this
* is all that gets touched under ICS), and that no code after
* this point reference any interrupt-specific SPR, in particular
* the EX_CONTEXT_K_ values.
*/
.ifc \function,handle_nmi
IRQ_DISABLE_ALL(r20)
.else
IRQ_DISABLE(r20, r21)
.endif
mtspr INTERRUPT_CRITICAL_SECTION, zero
/* Load tp with our per-cpu offset. */
#ifdef CONFIG_SMP
{
mfspr r20, SPR_SYSTEM_SAVE_K_0
moveli r21, hw2_last(__per_cpu_offset)
}
{
shl16insli r21, r21, hw1(__per_cpu_offset)
bfextu r20, r20, 0, LOG2_THREAD_SIZE-1
}
shl16insli r21, r21, hw0(__per_cpu_offset)
shl3add r20, r20, r21
ld tp, r20
#else
move tp, zero
#endif
#ifdef __COLLECT_LINKER_FEEDBACK__ #ifdef __COLLECT_LINKER_FEEDBACK__
/* /*
* Notify the feedback routines that we were in the * Notify the feedback routines that we were in the
...@@ -512,21 +535,6 @@ intvec_\vecname: ...@@ -512,21 +535,6 @@ intvec_\vecname:
FEEDBACK_ENTER(\function) FEEDBACK_ENTER(\function)
#endif #endif
/*
* we've captured enough state to the stack (including in
* particular our EX_CONTEXT state) that we can now release
* the interrupt critical section and replace it with our
* standard "interrupts disabled" mask value. This allows
* synchronous interrupts (and profile interrupts) to punch
* through from this point onwards.
*/
.ifc \function,handle_nmi
IRQ_DISABLE_ALL(r20)
.else
IRQ_DISABLE(r20, r21)
.endif
mtspr INTERRUPT_CRITICAL_SECTION, zero
/* /*
* Prepare the first 256 stack bytes to be rapidly accessible * Prepare the first 256 stack bytes to be rapidly accessible
* without having to fetch the background data. * without having to fetch the background data.
...@@ -736,9 +744,10 @@ STD_ENTRY(interrupt_return) ...@@ -736,9 +744,10 @@ STD_ENTRY(interrupt_return)
beqzt r30, .Lrestore_regs beqzt r30, .Lrestore_regs
j 3f j 3f
2: TRACE_IRQS_ON 2: TRACE_IRQS_ON
IRQ_ENABLE_LOAD(r20, r21)
movei r0, 1 movei r0, 1
mtspr INTERRUPT_CRITICAL_SECTION, r0 mtspr INTERRUPT_CRITICAL_SECTION, r0
IRQ_ENABLE(r20, r21) IRQ_ENABLE_APPLY(r20, r21)
beqzt r30, .Lrestore_regs beqzt r30, .Lrestore_regs
3: 3:
...@@ -755,7 +764,6 @@ STD_ENTRY(interrupt_return) ...@@ -755,7 +764,6 @@ STD_ENTRY(interrupt_return)
* that will save some cycles if this turns out to be a syscall. * that will save some cycles if this turns out to be a syscall.
*/ */
.Lrestore_regs: .Lrestore_regs:
FEEDBACK_REENTER(interrupt_return) /* called from elsewhere */
/* /*
* Rotate so we have one high bit and one low bit to test. * Rotate so we have one high bit and one low bit to test.
......
...@@ -444,6 +444,7 @@ static pgd_t pgtables[PTRS_PER_PGD] ...@@ -444,6 +444,7 @@ static pgd_t pgtables[PTRS_PER_PGD]
*/ */
static void __init kernel_physical_mapping_init(pgd_t *pgd_base) static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
{ {
unsigned long long irqmask;
unsigned long address, pfn; unsigned long address, pfn;
pmd_t *pmd; pmd_t *pmd;
pte_t *pte; pte_t *pte;
...@@ -633,10 +634,13 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base) ...@@ -633,10 +634,13 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
* - install pgtables[] as the real page table * - install pgtables[] as the real page table
* - flush the TLB so the new page table takes effect * - flush the TLB so the new page table takes effect
*/ */
irqmask = interrupt_mask_save_mask();
interrupt_mask_set_mask(-1ULL);
rc = flush_and_install_context(__pa(pgtables), rc = flush_and_install_context(__pa(pgtables),
init_pgprot((unsigned long)pgtables), init_pgprot((unsigned long)pgtables),
__get_cpu_var(current_asid), __get_cpu_var(current_asid),
cpumask_bits(my_cpu_mask)); cpumask_bits(my_cpu_mask));
interrupt_mask_restore_mask(irqmask);
BUG_ON(rc != 0); BUG_ON(rc != 0);
/* Copy the page table back to the normal swapper_pg_dir. */ /* Copy the page table back to the normal swapper_pg_dir. */
......
...@@ -24,6 +24,9 @@ ...@@ -24,6 +24,9 @@
/* /*
* This function is used as a helper when setting up the initial * This function is used as a helper when setting up the initial
* page table (swapper_pg_dir). * page table (swapper_pg_dir).
*
* You must mask ALL interrupts prior to invoking this code, since
* you can't legally touch the stack during the cache flush.
*/ */
extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access, extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access,
HV_ASID asid, HV_ASID asid,
...@@ -39,6 +42,9 @@ extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access, ...@@ -39,6 +42,9 @@ extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access,
* *
* Note that any non-NULL pointers must not point to the page that * Note that any non-NULL pointers must not point to the page that
* is handled by the stack_pte itself. * is handled by the stack_pte itself.
*
* You must mask ALL interrupts prior to invoking this code, since
* you can't legally touch the stack during the cache flush.
*/ */
extern int homecache_migrate_stack_and_flush(pte_t stack_pte, unsigned long va, extern int homecache_migrate_stack_and_flush(pte_t stack_pte, unsigned long va,
size_t length, pte_t *stack_ptep, size_t length, pte_t *stack_ptep,
......
...@@ -40,8 +40,7 @@ ...@@ -40,8 +40,7 @@
#define FRAME_R32 16 #define FRAME_R32 16
#define FRAME_R33 20 #define FRAME_R33 20
#define FRAME_R34 24 #define FRAME_R34 24
#define FRAME_R35 28 #define FRAME_SIZE 28
#define FRAME_SIZE 32
...@@ -66,12 +65,11 @@ ...@@ -66,12 +65,11 @@
#define r_my_cpumask r5 #define r_my_cpumask r5
/* Locals (callee-save); must not be more than FRAME_xxx above. */ /* Locals (callee-save); must not be more than FRAME_xxx above. */
#define r_save_ics r30 #define r_context_lo r30
#define r_context_lo r31 #define r_context_hi r31
#define r_context_hi r32 #define r_access_lo r32
#define r_access_lo r33 #define r_access_hi r33
#define r_access_hi r34 #define r_asid r34
#define r_asid r35
STD_ENTRY(flush_and_install_context) STD_ENTRY(flush_and_install_context)
/* /*
...@@ -104,11 +102,7 @@ STD_ENTRY(flush_and_install_context) ...@@ -104,11 +102,7 @@ STD_ENTRY(flush_and_install_context)
sw r_tmp, r33 sw r_tmp, r33
addi r_tmp, sp, FRAME_R34 addi r_tmp, sp, FRAME_R34
} }
{ sw r_tmp, r34
sw r_tmp, r34
addi r_tmp, sp, FRAME_R35
}
sw r_tmp, r35
/* Move some arguments to callee-save registers. */ /* Move some arguments to callee-save registers. */
{ {
...@@ -121,13 +115,6 @@ STD_ENTRY(flush_and_install_context) ...@@ -121,13 +115,6 @@ STD_ENTRY(flush_and_install_context)
} }
move r_asid, r_asid_in move r_asid, r_asid_in
/* Disable interrupts, since we can't use our stack. */
{
mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION
movei r_tmp, 1
}
mtspr INTERRUPT_CRITICAL_SECTION, r_tmp
/* First, flush our L2 cache. */ /* First, flush our L2 cache. */
{ {
move r0, zero /* cache_pa */ move r0, zero /* cache_pa */
...@@ -163,7 +150,7 @@ STD_ENTRY(flush_and_install_context) ...@@ -163,7 +150,7 @@ STD_ENTRY(flush_and_install_context)
} }
{ {
move r4, r_asid move r4, r_asid
movei r5, HV_CTX_DIRECTIO moveli r5, HV_CTX_DIRECTIO | CTX_PAGE_FLAG
} }
jal hv_install_context jal hv_install_context
bnz r0, .Ldone bnz r0, .Ldone
...@@ -175,9 +162,6 @@ STD_ENTRY(flush_and_install_context) ...@@ -175,9 +162,6 @@ STD_ENTRY(flush_and_install_context)
} }
.Ldone: .Ldone:
/* Reset interrupts back how they were before. */
mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics
/* Restore the callee-saved registers and return. */ /* Restore the callee-saved registers and return. */
addli lr, sp, FRAME_SIZE addli lr, sp, FRAME_SIZE
{ {
...@@ -202,10 +186,6 @@ STD_ENTRY(flush_and_install_context) ...@@ -202,10 +186,6 @@ STD_ENTRY(flush_and_install_context)
} }
{ {
lw r34, r_tmp lw r34, r_tmp
addli r_tmp, sp, FRAME_R35
}
{
lw r35, r_tmp
addi sp, sp, FRAME_SIZE addi sp, sp, FRAME_SIZE
} }
jrp lr jrp lr
......
...@@ -38,8 +38,7 @@ ...@@ -38,8 +38,7 @@
#define FRAME_R30 16 #define FRAME_R30 16
#define FRAME_R31 24 #define FRAME_R31 24
#define FRAME_R32 32 #define FRAME_R32 32
#define FRAME_R33 40 #define FRAME_SIZE 40
#define FRAME_SIZE 48
...@@ -60,10 +59,9 @@ ...@@ -60,10 +59,9 @@
#define r_my_cpumask r3 #define r_my_cpumask r3
/* Locals (callee-save); must not be more than FRAME_xxx above. */ /* Locals (callee-save); must not be more than FRAME_xxx above. */
#define r_save_ics r30 #define r_context r30
#define r_context r31 #define r_access r31
#define r_access r32 #define r_asid r32
#define r_asid r33
/* /*
* Caller-save locals and frame constants are the same as * Caller-save locals and frame constants are the same as
...@@ -93,11 +91,7 @@ STD_ENTRY(flush_and_install_context) ...@@ -93,11 +91,7 @@ STD_ENTRY(flush_and_install_context)
st r_tmp, r31 st r_tmp, r31
addi r_tmp, sp, FRAME_R32 addi r_tmp, sp, FRAME_R32
} }
{ st r_tmp, r32
st r_tmp, r32
addi r_tmp, sp, FRAME_R33
}
st r_tmp, r33
/* Move some arguments to callee-save registers. */ /* Move some arguments to callee-save registers. */
{ {
...@@ -106,13 +100,6 @@ STD_ENTRY(flush_and_install_context) ...@@ -106,13 +100,6 @@ STD_ENTRY(flush_and_install_context)
} }
move r_asid, r_asid_in move r_asid, r_asid_in
/* Disable interrupts, since we can't use our stack. */
{
mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION
movei r_tmp, 1
}
mtspr INTERRUPT_CRITICAL_SECTION, r_tmp
/* First, flush our L2 cache. */ /* First, flush our L2 cache. */
{ {
move r0, zero /* cache_pa */ move r0, zero /* cache_pa */
...@@ -147,7 +134,7 @@ STD_ENTRY(flush_and_install_context) ...@@ -147,7 +134,7 @@ STD_ENTRY(flush_and_install_context)
} }
{ {
move r2, r_asid move r2, r_asid
movei r3, HV_CTX_DIRECTIO moveli r3, HV_CTX_DIRECTIO | CTX_PAGE_FLAG
} }
jal hv_install_context jal hv_install_context
bnez r0, 1f bnez r0, 1f
...@@ -158,10 +145,7 @@ STD_ENTRY(flush_and_install_context) ...@@ -158,10 +145,7 @@ STD_ENTRY(flush_and_install_context)
jal hv_flush_all jal hv_flush_all
} }
1: /* Reset interrupts back how they were before. */ 1: /* Restore the callee-saved registers and return. */
mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics
/* Restore the callee-saved registers and return. */
addli lr, sp, FRAME_SIZE addli lr, sp, FRAME_SIZE
{ {
ld lr, lr ld lr, lr
...@@ -177,10 +161,6 @@ STD_ENTRY(flush_and_install_context) ...@@ -177,10 +161,6 @@ STD_ENTRY(flush_and_install_context)
} }
{ {
ld r32, r_tmp ld r32, r_tmp
addli r_tmp, sp, FRAME_R33
}
{
ld r33, r_tmp
addi sp, sp, FRAME_SIZE addi sp, sp, FRAME_SIZE
} }
jrp lr jrp lr
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment