ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low. This has been verified on a board and somewhat confirmed by both the GPIO name ("STATUS_LED_N") and the reduced schematics [1]. [1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf Fixes: 2c7c040c ("ARM: dts: bcm2835: Add Raspberry Pi Zero W") Signed-off-by:Vincent Stehlé <vincent.stehle@laposte.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com>
Showing
Please register or sign in to comment