Commit 58bb90ab authored by Vincent Stehlé's avatar Vincent Stehlé Committed by Florian Fainelli

ARM: dts: bcm2835-rpi-zero-w: Fix led polarity

The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.

This has been verified on a board and somewhat confirmed by both the GPIO
name ("STATUS_LED_N") and the reduced schematics [1].

[1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf

Fixes: 2c7c040c ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: default avatarVincent Stehlé <vincent.stehle@laposte.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
parent b9bbe6ed
...@@ -24,7 +24,7 @@ chosen { ...@@ -24,7 +24,7 @@ chosen {
leds { leds {
act { act {
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment