Merge tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Remove unnecessary locking around _OSC (Bjorn Helgaas)
   - Clarify message about _OSC failure (Bjorn Helgaas)
   - Remove notification of PCIe bandwidth changes (Bjorn Helgaas)
   - Tidy checking of syscall user config accessors (Heiner Kallweit)

  Resource management:
   - Decline to resize resources if boot config must be preserved (Ard
     Biesheuvel)
   - Fix pci_register_io_range() memory leak (Geert Uytterhoeven)

  Error handling (Keith Busch):
   - Clear error status from the correct device
   - Retain error recovery status so drivers can use it after reset
   - Log the type of Port (Root or Switch Downstream) that we reset
   - Always request a reset for Downstream Ports in frozen state

  Endpoint framework and NTB (Kishon Vijay Abraham I):
   - Make *_get_first_free_bar() take into account 64 bit BAR
   - Add helper API to get the 'next' unreserved BAR
   - Make *_free_bar() return error codes on failure
   - Remove unused pci_epf_match_device()
   - Add support to associate secondary EPC with EPF
   - Add support in configfs to associate two EPCs with EPF
   - Add pci_epc_ops to map MSI IRQ
   - Add pci_epf_ops to expose function-specific attrs
   - Allow user to create sub-directory of 'EPF Device' directory
   - Implement ->msi_map_irq() ops for cadence
   - Configure LM_EP_FUNC_CFG based on epc->function_num_map for cadence
   - Add EP function driver to provide NTB functionality
   - Add support for EPF PCI Non-Transparent Bridge
   - Add specification for PCI NTB function device
   - Add PCI endpoint NTB function user guide
   - Add configfs binding documentation for pci-ntb endpoint function

  Broadcom STB PCIe controller driver:
   - Add support for BCM4908 and external PERST# signal controller
     (Rafał Miłecki)

  Cadence PCIe controller driver:
   - Retrain Link to work around Gen2 training defect (Nadeem Athani)
   - Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof
     Wilczyński)

  Freescale Layerscape PCIe controller driver:
   - Add LX2160A rev2 EP mode support (Hou Zhiqiang)
   - Convert to builtin_platform_driver() (Michael Walle)

  MediaTek PCIe controller driver:
   - Fix OF node reference leak (Krzysztof Wilczyński)

  Microchip PolarFlare PCIe controller driver:
   - Add Microchip PolarFire PCIe controller driver (Daire McNamara)

  Qualcomm PCIe controller driver:
   - Use PHY_REFCLK_USE_PAD only for ipq8064 (Ansuel Smith)
   - Add support for ddrss_sf_tbu clock for sm8250 (Dmitry Baryshkov)

  Renesas R-Car PCIe controller driver:
   - Drop PCIE_RCAR config option (Lad Prabhakar)
   - Always allocate MSI addresses in 32bit space (Marek Vasut)

  Rockchip PCIe controller driver:
   - Add FriendlyARM NanoPi M4B DT binding (Chen-Yu Tsai)
   - Make 'ep-gpios' DT property optional (Chen-Yu Tsai)

  Synopsys DesignWare PCIe controller driver:
   - Work around ECRC configuration hardware defect (Vidya Sagar)
   - Drop support for config space in DT 'ranges' (Rob Herring)
   - Change size to u64 for EP outbound iATU (Shradha Todi)
   - Add upper limit address for outbound iATU (Shradha Todi)
   - Make dw_pcie ops optional (Jisheng Zhang)
   - Remove unnecessary dw_pcie_ops from al driver (Jisheng Zhang)

  Xilinx Versal CPM PCIe controller driver:
   - Fix OF node reference leak (Pan Bian)

  Miscellaneous:
   - Remove tango host controller driver (Arnd Bergmann)
   - Remove IRQ handler & data together (altera-msi, brcmstb, dwc)
     (Martin Kaiser)
   - Fix xgene-msi race in installing chained IRQ handler (Martin
     Kaiser)
   - Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He)
   - Fix pci-bridge-emul array overruns (Russell King)
   - Remove obsolete uses of WARN_ON(in_interrupt()) (Sebastian Andrzej
     Siewior)"

* tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (69 commits)
  PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064
  PCI: qcom: Add support for ddrss_sf_tbu clock
  dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250
  PCI: al: Remove useless dw_pcie_ops
  PCI: dwc: Don't assume the ops in dw_pcie always exist
  PCI: dwc: Add upper limit address for outbound iATU
  PCI: dwc: Change size to u64 for EP outbound iATU
  PCI: dwc: Drop support for config space in 'ranges'
  PCI: layerscape: Convert to builtin_platform_driver()
  PCI: layerscape: Add LX2160A rev2 EP mode support
  dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings
  PCI: dwc: Work around ECRC configuration issue
  PCI/portdrv: Report reset for frozen channel
  PCI/AER: Specify the type of Port that was reset
  PCI/ERR: Retain status from error notification
  PCI/AER: Clear AER status from Root Port when resetting Downstream Port
  PCI/ERR: Clear status of the reporting device
  dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
  PCI: rockchip: Make 'ep-gpios' DT property optional
  Documentation: PCI: Add PCI endpoint NTB function user guide
  ...

Documentation/PCI/endpoint/function/binding/pci-ntb.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+PCI NTB Endpoint Function
+==========================
+
+1) Create a subdirectory to pci_epf_ntb directory in configfs.
+
+Standard EPF Configurable Fields:
+
+================   ===========================================================
+vendorid	   should be 0x104c
+deviceid	   should be 0xb00d for TI's J721E SoC
+revid		   don't care
+progif_code	   don't care
+subclass_code	   should be 0x00
+baseclass_code	   should be 0x5
+cache_line_size	   don't care
+subsys_vendor_id   don't care
+subsys_id	   don't care
+interrupt_pin	   don't care
+msi_interrupts	   don't care
+msix_interrupts	   don't care
+================   ===========================================================
+
+2) Create a subdirectory to directory created in 1
+
+NTB EPF specific configurable fields:
+
+================   ===========================================================
+db_count	   Number of doorbells; default = 4
+mw1     	   size of memory window1
+mw2     	   size of memory window2
+mw3     	   size of memory window3
+mw4     	   size of memory window4
+num_mws     	   Number of memory windows; max = 4
+spad_count     	   Number of scratchpad registers; default = 64
+================   ===========================================================

Documentation/PCI/endpoint/index.rst

@@ -11,5 +11,8 @@ PCI Endpoint Framework
    pci-endpoint-cfs
    pci-test-function
    pci-test-howto
+   pci-ntb-function
+   pci-ntb-howto
 
    function/binding/pci-test
+   function/binding/pci-ntb

Documentation/PCI/endpoint/pci-endpoint-cfs.rst

@@ -68,6 +68,16 @@ created)
 				... subsys_vendor_id
 				... subsys_id
 				... interrupt_pin
+                                ... primary/
+			                ... <Symlink EPC Device1>/
+                                ... secondary/
+			                ... <Symlink EPC Device2>/
+
+If an EPF device has to be associated with 2 EPCs (like in the case of
+Non-transparent bridge), symlink of endpoint controller connected to primary
+interface should be added in 'primary' directory and symlink of endpoint
+controller connected to secondary interface should be added in 'secondary'
+directory.
 
 EPC Device
 ==========

Documentation/PCI/endpoint/pci-ntb-howto.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+===================================================================
+PCI Non-Transparent Bridge (NTB) Endpoint Function (EPF) User Guide
+===================================================================
+
+:Author: Kishon Vijay Abraham I <kishon@ti.com>
+
+This document is a guide to help users use pci-epf-ntb function driver
+and ntb_hw_epf host driver for NTB functionality. The list of steps to
+be followed in the host side and EP side is given below. For the hardware
+configuration and internals of NTB using configurable endpoints see
+Documentation/PCI/endpoint/pci-ntb-function.rst
+
+Endpoint Device
+===============
+
+Endpoint Controller Devices
+---------------------------
+
+For implementing NTB functionality at least two endpoint controller devices
+are required.
+
+To find the list of endpoint controller devices in the system::
+
+	# ls /sys/class/pci_epc/
+	2900000.pcie-ep  2910000.pcie-ep
+
+If PCI_ENDPOINT_CONFIGFS is enabled::
+
+	# ls /sys/kernel/config/pci_ep/controllers
+	2900000.pcie-ep  2910000.pcie-ep
+
+
+Endpoint Function Drivers
+-------------------------
+
+To find the list of endpoint function drivers in the system::
+
+	# ls /sys/bus/pci-epf/drivers
+	pci_epf_ntb   pci_epf_ntb
+
+If PCI_ENDPOINT_CONFIGFS is enabled::
+
+	# ls /sys/kernel/config/pci_ep/functions
+	pci_epf_ntb   pci_epf_ntb
+
+
+Creating pci-epf-ntb Device
+----------------------------
+
+PCI endpoint function device can be created using the configfs. To create
+pci-epf-ntb device, the following commands can be used::
+
+	# mount -t configfs none /sys/kernel/config
+	# cd /sys/kernel/config/pci_ep/
+	# mkdir functions/pci_epf_ntb/func1
+
+The "mkdir func1" above creates the pci-epf-ntb function device that will
+be probed by pci_epf_ntb driver.
+
+The PCI endpoint framework populates the directory with the following
+configurable fields::
+
+	# ls functions/pci_epf_ntb/func1
+	baseclass_code    deviceid          msi_interrupts    pci-epf-ntb.0
+	progif_code       secondary         subsys_id         vendorid
+	cache_line_size   interrupt_pin     msix_interrupts   primary
+	revid             subclass_code     subsys_vendor_id
+
+The PCI endpoint function driver populates these entries with default values
+when the device is bound to the driver. The pci-epf-ntb driver populates
+vendorid with 0xffff and interrupt_pin with 0x0001::
+
+	# cat functions/pci_epf_ntb/func1/vendorid
+	0xffff
+	# cat functions/pci_epf_ntb/func1/interrupt_pin
+	0x0001
+
+
+Configuring pci-epf-ntb Device
+-------------------------------
+
+The user can configure the pci-epf-ntb device using its configfs entry. In order
+to change the vendorid and the deviceid, the following
+commands can be used::
+
+	# echo 0x104c > functions/pci_epf_ntb/func1/vendorid
+	# echo 0xb00d > functions/pci_epf_ntb/func1/deviceid
+
+In order to configure NTB specific attributes, a new sub-directory to func1
+should be created::
+
+	# mkdir functions/pci_epf_ntb/func1/pci_epf_ntb.0/
+
+The NTB function driver will populate this directory with various attributes
+that can be configured by the user::
+
+	# ls functions/pci_epf_ntb/func1/pci_epf_ntb.0/
+	db_count    mw1         mw2         mw3         mw4         num_mws
+	spad_count
+
+A sample configuration for NTB function is given below::
+
+	# echo 4 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/db_count
+	# echo 128 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/spad_count
+	# echo 2 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/num_mws
+	# echo 0x100000 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/mw1
+	# echo 0x100000 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/mw2
+
+Binding pci-epf-ntb Device to EP Controller
+--------------------------------------------
+
+NTB function device should be attached to two PCI endpoint controllers
+connected to the two hosts. Use the 'primary' and 'secondary' entries
+inside NTB function device to attach one PCI endpoint controller to
+primary interface and the other PCI endpoint controller to the secondary
+interface::
+
+	# ln -s controllers/2900000.pcie-ep/ functions/pci-epf-ntb/func1/primary
+	# ln -s controllers/2910000.pcie-ep/ functions/pci-epf-ntb/func1/secondary
+
+Once the above step is completed, both the PCI endpoint controllers are ready to
+establish a link with the host.
+
+
+Start the Link
+--------------
+
+In order for the endpoint device to establish a link with the host, the _start_
+field should be populated with '1'. For NTB, both the PCI endpoint controllers
+should establish link with the host::
+
+	# echo 1 > controllers/2900000.pcie-ep/start
+	# echo 1 > controllers/2910000.pcie-ep/start
+
+
+RootComplex Device
+==================
+
+lspci Output
+------------
+
+Note that the devices listed here correspond to the values populated in
+"Creating pci-epf-ntb Device" section above::
+
+	# lspci
+	0000:00:00.0 PCI bridge: Texas Instruments Device b00d
+	0000:01:00.0 RAM memory: Texas Instruments Device b00d
+
+
+Using ntb_hw_epf Device
+-----------------------
+
+The host side software follows the standard NTB software architecture in Linux.
+All the existing client side NTB utilities like NTB Transport Client and NTB
+Netdev, NTB Ping Pong Test Client and NTB Tool Test Client can be used with NTB
+function device.
+
+For more information on NTB see
+:doc:`Non-Transparent Bridge <../../driver-api/ntb>`

Documentation/devicetree/bindings/arm/rockchip.yaml

@@ -132,6 +132,7 @@ properties:
           - enum:
               - friendlyarm,nanopc-t4
               - friendlyarm,nanopi-m4
+              - friendlyarm,nanopi-m4b
               - friendlyarm,nanopi-neo4
           - const: rockchip,rk3399
 

Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

@@ -14,6 +14,7 @@ properties:
     items:
       - enum:
           - brcm,bcm2711-pcie # The Raspberry Pi 4
+          - brcm,bcm4908-pcie
           - brcm,bcm7211-pcie # Broadcom STB version of RPi4
           - brcm,bcm7278-pcie # Broadcom 7278 Arm
           - brcm,bcm7216-pcie # Broadcom 7216 Arm
@@ -63,15 +64,6 @@ properties:
 
   aspm-no-l0s: true
 
-  resets:
-    description: for "brcm,bcm7216-pcie", must be a valid reset
-      phandle pointing to the RESCAL reset controller provider node.
-    $ref: "/schemas/types.yaml#/definitions/phandle"
-
-  reset-names:
-    items:
-      - const: rescal
-
   brcm,scb-sizes:
     description: u64 giving the 64bit PCIe memory
       viewport size of a memory controller.  There may be up to
@@ -98,12 +90,39 @@ required:
 
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm4908-pcie
+    then:
+      properties:
+        resets:
+          items:
+            - description: reset controller handling the PERST# signal
+
+        reset-names:
+          items:
+            - const: perst
+
+      required:
+        - resets
+        - reset-names
   - if:
       properties:
         compatible:
           contains:
             const: brcm,bcm7216-pcie
     then:
+      properties:
+        resets:
+          items:
+            - description: phandle pointing to the RESCAL reset controller
+
+        reset-names:
+          items:
+            - const: rescal
+
       required:
         - resets
         - reset-names

Documentation/devicetree/bindings/pci/layerscape-pci.txt

@@ -26,6 +26,7 @@ Required properties:
 	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
 	"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
 	"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep"
 - reg: base addresses and lengths of the PCIe controller register blocks.
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.

Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/microchip,pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PCIe Root Port Bridge Controller Device Tree Bindings
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: microchip,pcie-host-1.0 # PolarFire
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: apb
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: pcie
+      - const: msi
+
+  ranges:
+    maxItems: 1
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+required:
+  - reg
+  - reg-names
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            pcie0: pcie@2030000000 {
+                    compatible = "microchip,pcie-host-1.0";
+                    reg = <0x0 0x70000000 0x0 0x08000000>,
+                          <0x0 0x43000000 0x0 0x00010000>;
+                    reg-names = "cfg", "apb";
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <119>;
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+                                    <0 0 0 2 &pcie_intc0 1>,
+                                    <0 0 0 3 &pcie_intc0 2>,
+                                    <0 0 0 4 &pcie_intc0 3>;
+                    interrupt-parent = <&plic0>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    bus-range = <0x00 0x7f>;
+                    ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>;
+                    pcie_intc0: interrupt-controller {
+                        #address-cells = <0>;
+                        #interrupt-cells = <1>;
+                        interrupt-controller;
+                    };
+            };
+    };

Documentation/devicetree/bindings/pci/qcom,pcie.txt

@@ -132,8 +132,20 @@
 			- "master_bus"	AXI Master clock
 			- "slave_bus"	AXI Slave clock
 
--clock-names:
-	Usage: required for sdm845 and sm8250
+- clock-names:
+	Usage: required for sdm845
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "aux"		Auxiliary clock
+			- "cfg"		Configuration clock
+			- "bus_master"	Master AXI clock
+			- "bus_slave"	Slave AXI clock
+			- "slave_q2a"	Slave Q2A clock
+			- "tbu"		PCIe TBU clock
+			- "pipe"	PIPE clock
+
+- clock-names:
+	Usage: required for sm8250
 	Value type: <stringlist>
 	Definition: Should contain the following entries
 			- "aux"		Auxiliary clock
@@ -142,6 +154,7 @@
 			- "bus_slave"	Slave AXI clock
 			- "slave_q2a"	Slave Q2A clock
 			- "tbu"		PCIe TBU clock
+			- "ddrss_sf_tbu" PCIe SF TBU clock
 			- "pipe"	PIPE clock
 
 - resets:

MAINTAINERS

@@ -2578,7 +2578,7 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/clk/keystone/
 
-ARM/TEXAS INSTRUMENT KEYSTONE ClOCKSOURCE
+ARM/TEXAS INSTRUMENT KEYSTONE CLOCKSOURCE
 M:	Santosh Shilimkar <ssantosh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-kernel@vger.kernel.org
@@ -13890,6 +13890,13 @@ S:	Supported
 F:	Documentation/devicetree/bindings/pci/mediatek*
 F:	drivers/pci/controller/*mediatek*
 
+PCIE DRIVER FOR MICROCHIP
+M:	Daire McNamara <daire.mcnamara@microchip.com>
+L:	linux-pci@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/pci/microchip*
+F:	drivers/pci/controller/*microchip*
+
 PCIE DRIVER FOR QUALCOMM MSM
 M:	Stanimir Varbanov <svarbanov@mm-sol.com>
 L:	linux-pci@vger.kernel.org

arch/s390/include/asm/facility.h

@@ -44,7 +44,7 @@ static inline int __test_facility(unsigned long nr, void *facilities)
 }
 
 /*
- * The test_facility function uses the bit odering where the MSB is bit 0.
+ * The test_facility function uses the bit ordering where the MSB is bit 0.
  * That makes it easier to query facility bits with the bit number as
  * documented in the Principles of Operation.
  */

drivers/acpi/pci_root.c

@@ -56,8 +56,6 @@ static struct acpi_scan_handler pci_root_handler = {
 	},
 };
 
-static DEFINE_MUTEX(osc_lock);
-
 /**
  * acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge
  * @handle:  the ACPI CA node in question.
@@ -223,12 +221,7 @@ static acpi_status acpi_pci_query_osc(struct acpi_pci_root *root,
 
 static acpi_status acpi_pci_osc_support(struct acpi_pci_root *root, u32 flags)
 {
-	acpi_status status;
-
-	mutex_lock(&osc_lock);
-	status = acpi_pci_query_osc(root, flags, NULL);
-	mutex_unlock(&osc_lock);
-	return status;
+	return acpi_pci_query_osc(root, flags, NULL);
 }
 
 struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
@@ -353,10 +346,10 @@ EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
  * _OSC bits the BIOS has granted control of, but its contents are meaningless
  * on failure.
  **/
-acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req)
+static acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req)
 {
 	struct acpi_pci_root *root;
-	acpi_status status = AE_OK;
+	acpi_status status;
 	u32 ctrl, capbuf[3];
 
 	if (!mask)
@@ -370,18 +363,16 @@ acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req)
 	if (!root)
 		return AE_NOT_EXIST;
 
-	mutex_lock(&osc_lock);
-
 	*mask = ctrl | root->osc_control_set;
 	/* No need to evaluate _OSC if the control was already granted. */
 	if ((root->osc_control_set & ctrl) == ctrl)
-		goto out;
+		return AE_OK;
 
 	/* Need to check the available controls bits before requesting them. */
 	while (*mask) {
 		status = acpi_pci_query_osc(root, root->osc_support_set, mask);
 		if (ACPI_FAILURE(status))
-			goto out;
+			return status;
 		if (ctrl == *mask)
 			break;
 		decode_osc_control(root, "platform does not support",
@@ -392,21 +383,19 @@ acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req)
 	if ((ctrl & req) != req) {
 		decode_osc_control(root, "not requesting control; platform does not support",
 				   req & ~(ctrl));
-		status = AE_SUPPORT;
-		goto out;
+		return AE_SUPPORT;
 	}
 
 	capbuf[OSC_QUERY_DWORD] = 0;
 	capbuf[OSC_SUPPORT_DWORD] = root->osc_support_set;
 	capbuf[OSC_CONTROL_DWORD] = ctrl;
 	status = acpi_pci_run_osc(handle, capbuf, mask);
-	if (ACPI_SUCCESS(status))
-		root->osc_control_set = *mask;
-out:
-	mutex_unlock(&osc_lock);
-	return status;
+	if (ACPI_FAILURE(status))
+		return status;
+
+	root->osc_control_set = *mask;
+	return AE_OK;
 }
-EXPORT_SYMBOL(acpi_pci_osc_control_set);
 
 static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
 				 bool is_pcie)
@@ -452,9 +441,8 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
 		if ((status == AE_NOT_FOUND) && !is_pcie)
 			return;
 
-		dev_info(&device->dev, "_OSC failed (%s)%s\n",
-			 acpi_format_exception(status),
-			 pcie_aspm_support_enabled() ? "; disabling ASPM" : "");
+		dev_info(&device->dev, "_OSC: platform retains control of PCIe features (%s)\n",
+			 acpi_format_exception(status));
 		return;
 	}
 
@@ -510,7 +498,7 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
 	} else {
 		decode_osc_control(root, "OS requested", requested);
 		decode_osc_control(root, "platform willing to grant", control);
-		dev_info(&device->dev, "_OSC failed (%s); disabling ASPM\n",
+		dev_info(&device->dev, "_OSC: platform retains control of PCIe features (%s)\n",
 			acpi_format_exception(status));
 
 		/*

drivers/gpu/drm/qxl/qxl_drv.c

@@ -141,7 +141,7 @@ static void qxl_drm_release(struct drm_device *dev)
 
 	/*
 	 * TODO: qxl_device_fini() call should be in qxl_pci_remove(),
-	 * reodering qxl_modeset_fini() + qxl_device_fini() calls is
+	 * reordering qxl_modeset_fini() + qxl_device_fini() calls is
 	 * non-trivial though.
 	 */
 	qxl_modeset_fini(qdev);

drivers/misc/pci_endpoint_test.c

@@ -68,7 +68,6 @@
 #define PCI_ENDPOINT_TEST_FLAGS			0x2c
 #define FLAG_USE_DMA				BIT(0)
 
-#define PCI_DEVICE_ID_TI_J721E			0xb00d
 #define PCI_DEVICE_ID_TI_AM654			0xb00c
 #define PCI_DEVICE_ID_LS1088A			0x80c0
 

drivers/net/wireless/intel/iwlwifi/fw/file.h

@@ -870,7 +870,7 @@ struct iwl_fw_dbg_trigger_time_event {
  * tx_bar: tid bitmap to configure on what tid the trigger should occur
  *	when a BAR is send (for an Rx BlocAck session).
  * frame_timeout: tid bitmap to configure on what tid the trigger should occur
- *	when a frame times out in the reodering buffer.
+ *	when a frame times out in the reordering buffer.
  */
 struct iwl_fw_dbg_trigger_ba {
 	__le16 rx_ba_start;

drivers/ntb/hw/Kconfig

@@ -2,4 +2,5 @@
 source "drivers/ntb/hw/amd/Kconfig"
 source "drivers/ntb/hw/idt/Kconfig"
 source "drivers/ntb/hw/intel/Kconfig"
+source "drivers/ntb/hw/epf/Kconfig"
 source "drivers/ntb/hw/mscc/Kconfig"

drivers/ntb/hw/Makefile

@@ -2,4 +2,5 @@
 obj-$(CONFIG_NTB_AMD)	+= amd/
 obj-$(CONFIG_NTB_IDT)	+= idt/
 obj-$(CONFIG_NTB_INTEL)	+= intel/
+obj-$(CONFIG_NTB_EPF)	+= epf/
 obj-$(CONFIG_NTB_SWITCHTEC) += mscc/

drivers/ntb/hw/epf/Kconfig

+config NTB_EPF
+	tristate "Generic EPF Non-Transparent Bridge support"
+	depends on m
+	help
+	  This driver supports EPF NTB on configurable endpoint.
+	  If unsure, say N.

drivers/ntb/hw/epf/Makefile

+obj-$(CONFIG_NTB_EPF) += ntb_hw_epf.o

drivers/pci/Makefile

@@ -36,4 +36,4 @@ obj-$(CONFIG_PCI_ENDPOINT)	+= endpoint/
 obj-y				+= controller/
 obj-y				+= switch/
 
-ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
+subdir-ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG

drivers/pci/controller/Kconfig

@@ -55,15 +55,6 @@ config PCI_RCAR_GEN2
 	  There are 3 internal PCI controllers available with a single
 	  built-in EHCI/OHCI host controller present on each one.
 
-config PCIE_RCAR
-	bool "Renesas R-Car PCIe controller"
-	depends on ARCH_RENESAS || COMPILE_TEST
-	depends on PCI_MSI_IRQ_DOMAIN
-	select PCIE_RCAR_HOST
-	help
-	  Say Y here if you want PCIe controller support on R-Car SoCs.
-	  This option will be removed after arm64 defconfig is updated.
-
 config PCIE_RCAR_HOST
 	bool "Renesas R-Car PCIe host controller"
 	depends on ARCH_RENESAS || COMPILE_TEST
@@ -242,20 +233,6 @@ config PCIE_MEDIATEK
 	  Say Y here if you want to enable PCIe controller support on
 	  MediaTek SoCs.
 
-config PCIE_TANGO_SMP8759
-	bool "Tango SMP8759 PCIe controller (DANGEROUS)"
-	depends on ARCH_TANGO && PCI_MSI && OF
-	depends on BROKEN
-	select PCI_HOST_COMMON
-	help
-	  Say Y here to enable PCIe controller support for Sigma Designs
-	  Tango SMP8759-based systems.
-
-	  Note: The SMP8759 controller multiplexes PCI config and MMIO
-	  accesses, and Linux doesn't provide a way to serialize them.
-	  This can lead to data corruption if drivers perform concurrent
-	  config and MMIO accesses.
-
 config VMD
 	depends on PCI_MSI && X86_64 && SRCU
 	tristate "Intel Volume Management Device Driver"
@@ -273,7 +250,7 @@ config VMD
 
 config PCIE_BRCMSTB
 	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
 	default ARCH_BRCMSTB
@@ -298,6 +275,16 @@ config PCI_LOONGSON
 	  Say Y here if you want to enable PCI controller support on
 	  Loongson systems.
 
+config PCIE_MICROCHIP_HOST
+	bool "Microchip AXI PCIe host bridge support"
+	depends on PCI_MSI && OF
+	select PCI_MSI_IRQ_DOMAIN
+	select GENERIC_MSI_IRQ_DOMAIN
+	select PCI_HOST_COMMON
+	help
+	  Say Y here if you want kernel to support the Microchip AXI PCIe
+	  Host Bridge driver.
+
 config PCIE_HISI_ERR
 	depends on ACPI_APEI_GHES && (ARM64 || COMPILE_TEST)
 	bool "HiSilicon HIP PCIe controller error handling driver"

drivers/pci/controller/Makefile

@@ -27,7 +27,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
 obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
 obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
 obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
-obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
+obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
 obj-$(CONFIG_VMD) += vmd.o
 obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
 obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o

drivers/pci/controller/cadence/pci-j721e.c

@@ -64,6 +64,7 @@ enum j721e_pcie_mode {
 
 struct j721e_pcie_data {
 	enum j721e_pcie_mode	mode;
+	bool quirk_retrain_flag;
 };
 
 static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
@@ -280,6 +281,7 @@ static struct pci_ops cdns_ti_pcie_host_ops = {
 
 static const struct j721e_pcie_data j721e_pcie_rc_data = {
 	.mode = PCI_MODE_RC,
+	.quirk_retrain_flag = true,
 };
 
 static const struct j721e_pcie_data j721e_pcie_ep_data = {
@@ -388,6 +390,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 		bridge->ops = &cdns_ti_pcie_host_ops;
 		rc = pci_host_bridge_priv(bridge);
+		rc->quirk_retrain_flag = data->quirk_retrain_flag;
 
 		cdns_pcie = &rc->pcie;
 		cdns_pcie->dev = dev;

drivers/pci/controller/cadence/pcie-cadence-ep.c

@@ -382,6 +382,57 @@ static int cdns_pcie_ep_send_msi_irq(struct cdns_pcie_ep *ep, u8 fn,
 	return 0;
 }
 
+static int cdns_pcie_ep_map_msi_irq(struct pci_epc *epc, u8 fn,
+				    phys_addr_t addr, u8 interrupt_num,
+				    u32 entry_size, u32 *msi_data,
+				    u32 *msi_addr_offset)
+{
+	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
+	u32 cap = CDNS_PCIE_EP_FUNC_MSI_CAP_OFFSET;
+	struct cdns_pcie *pcie = &ep->pcie;
+	u64 pci_addr, pci_addr_mask = 0xff;
+	u16 flags, mme, data, data_mask;
+	u8 msi_count;
+	int ret;
+	int i;
+
+	/* Check whether the MSI feature has been enabled by the PCI host. */
+	flags = cdns_pcie_ep_fn_readw(pcie, fn, cap + PCI_MSI_FLAGS);
+	if (!(flags & PCI_MSI_FLAGS_ENABLE))
+		return -EINVAL;
+
+	/* Get the number of enabled MSIs */
+	mme = (flags & PCI_MSI_FLAGS_QSIZE) >> 4;
+	msi_count = 1 << mme;
+	if (!interrupt_num || interrupt_num > msi_count)
+		return -EINVAL;
+
+	/* Compute the data value to be written. */
+	data_mask = msi_count - 1;
+	data = cdns_pcie_ep_fn_readw(pcie, fn, cap + PCI_MSI_DATA_64);
+	data = data & ~data_mask;
+
+	/* Get the PCI address where to write the data into. */
+	pci_addr = cdns_pcie_ep_fn_readl(pcie, fn, cap + PCI_MSI_ADDRESS_HI);
+	pci_addr <<= 32;
+	pci_addr |= cdns_pcie_ep_fn_readl(pcie, fn, cap + PCI_MSI_ADDRESS_LO);
+	pci_addr &= GENMASK_ULL(63, 2);
+
+	for (i = 0; i < interrupt_num; i++) {
+		ret = cdns_pcie_ep_map_addr(epc, fn, addr,
+					    pci_addr & ~pci_addr_mask,
+					    entry_size);
+		if (ret)
+			return ret;
+		addr = addr + entry_size;
+	}
+
+	*msi_data = data;
+	*msi_addr_offset = pci_addr & pci_addr_mask;
+
+	return 0;
+}
+
 static int cdns_pcie_ep_send_msix_irq(struct cdns_pcie_ep *ep, u8 fn,
 				      u16 interrupt_num)
 {
@@ -455,18 +506,13 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
 	struct cdns_pcie *pcie = &ep->pcie;
 	struct device *dev = pcie->dev;
-	struct pci_epf *epf;
-	u32 cfg;
 	int ret;
 
 	/*
 	 * BIT(0) is hardwired to 1, hence function 0 is always enabled
 	 * and can't be disabled anyway.
 	 */
-	cfg = BIT(0);
-	list_for_each_entry(epf, &epc->pci_epf, list)
-		cfg |= BIT(epf->func_no);
-	cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, cfg);
+	cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, epc->function_num_map);
 
 	ret = cdns_pcie_start_link(pcie);
 	if (ret) {
@@ -481,6 +527,7 @@ static const struct pci_epc_features cdns_pcie_epc_features = {
 	.linkup_notifier = false,
 	.msi_capable = true,
 	.msix_capable = true,
+	.align = 256,
 };
 
 static const struct pci_epc_features*
@@ -500,6 +547,7 @@ static const struct pci_epc_ops cdns_pcie_epc_ops = {
 	.set_msix	= cdns_pcie_ep_set_msix,
 	.get_msix	= cdns_pcie_ep_get_msix,
 	.raise_irq	= cdns_pcie_ep_raise_irq,
+	.map_msi_irq	= cdns_pcie_ep_map_msi_irq,
 	.start		= cdns_pcie_ep_start,
 	.get_features	= cdns_pcie_ep_get_features,
 };

drivers/pci/controller/cadence/pcie-cadence-host.c

@@ -77,6 +77,68 @@ static struct pci_ops cdns_pcie_host_ops = {
 	.write		= pci_generic_config_write,
 };
 
+static int cdns_pcie_host_wait_for_link(struct cdns_pcie *pcie)
+{
+	struct device *dev = pcie->dev;
+	int retries;
+
+	/* Check if the link is up or not */
+	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+		if (cdns_pcie_link_up(pcie)) {
+			dev_info(dev, "Link up\n");
+			return 0;
+		}
+		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int cdns_pcie_retrain(struct cdns_pcie *pcie)
+{
+	u32 lnk_cap_sls, pcie_cap_off = CDNS_PCIE_RP_CAP_OFFSET;
+	u16 lnk_stat, lnk_ctl;
+	int ret = 0;
+
+	/*
+	 * Set retrain bit if current speed is 2.5 GB/s,
+	 * but the PCIe root port support is > 2.5 GB/s.
+	 */
+
+	lnk_cap_sls = cdns_pcie_readl(pcie, (CDNS_PCIE_RP_BASE + pcie_cap_off +
+					     PCI_EXP_LNKCAP));
+	if ((lnk_cap_sls & PCI_EXP_LNKCAP_SLS) <= PCI_EXP_LNKCAP_SLS_2_5GB)
+		return ret;
+
+	lnk_stat = cdns_pcie_rp_readw(pcie, pcie_cap_off + PCI_EXP_LNKSTA);
+	if ((lnk_stat & PCI_EXP_LNKSTA_CLS) == PCI_EXP_LNKSTA_CLS_2_5GB) {
+		lnk_ctl = cdns_pcie_rp_readw(pcie,
+					     pcie_cap_off + PCI_EXP_LNKCTL);
+		lnk_ctl |= PCI_EXP_LNKCTL_RL;
+		cdns_pcie_rp_writew(pcie, pcie_cap_off + PCI_EXP_LNKCTL,
+				    lnk_ctl);
+
+		ret = cdns_pcie_host_wait_for_link(pcie);
+	}
+	return ret;
+}
+
+static int cdns_pcie_host_start_link(struct cdns_pcie_rc *rc)
+{
+	struct cdns_pcie *pcie = &rc->pcie;
+	int ret;
+
+	ret = cdns_pcie_host_wait_for_link(pcie);
+
+	/*
+	 * Retrain link for Gen2 training defect
+	 * if quirk flag is set.
+	 */
+	if (!ret && rc->quirk_retrain_flag)
+		ret = cdns_pcie_retrain(pcie);
+
+	return ret;
+}
 
 static int cdns_pcie_host_init_root_port(struct cdns_pcie_rc *rc)
 {
@@ -321,9 +383,10 @@ static int cdns_pcie_host_map_dma_ranges(struct cdns_pcie_rc *rc)
 
 	resource_list_for_each_entry(entry, &bridge->dma_ranges) {
 		err = cdns_pcie_host_bar_config(rc, entry);
-		if (err)
+		if (err) {
 			dev_err(dev, "Fail to configure IB using dma-ranges\n");
-		return err;
+			return err;
+		}
 	}
 
 	return 0;
@@ -398,23 +461,6 @@ static int cdns_pcie_host_init(struct device *dev,
 	return cdns_pcie_host_init_address_translation(rc);
 }
 
-static int cdns_pcie_host_wait_for_link(struct cdns_pcie *pcie)
-{
-	struct device *dev = pcie->dev;
-	int retries;
-
-	/* Check if the link is up or not */
-	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
-		if (cdns_pcie_link_up(pcie)) {
-			dev_info(dev, "Link up\n");
-			return 0;
-		}
-		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
-	}
-
-	return -ETIMEDOUT;
-}
-
 int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 {
 	struct device *dev = rc->pcie.dev;
@@ -457,7 +503,7 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 		return ret;
 	}
 
-	ret = cdns_pcie_host_wait_for_link(pcie);
+	ret = cdns_pcie_host_start_link(rc);
 	if (ret)
 		dev_dbg(dev, "PCIe link never came up\n");
 

drivers/pci/controller/cadence/pcie-cadence.h

@@ -119,7 +119,7 @@
  * Root Port Registers (PCI configuration space for the root port function)
  */
 #define CDNS_PCIE_RP_BASE	0x00200000
-
+#define CDNS_PCIE_RP_CAP_OFFSET 0xc0
 
 /*
  * Address Translation Registers
@@ -291,6 +291,7 @@ struct cdns_pcie {
  * @device_id: PCI device ID
  * @avail_ib_bar: Satus of RP_BAR0, RP_BAR1 and	RP_NO_BAR if it's free or
  *                available
+ * @quirk_retrain_flag: Retrain link as quirk for PCIe Gen2
  */
 struct cdns_pcie_rc {
 	struct cdns_pcie	pcie;
@@ -299,6 +300,7 @@ struct cdns_pcie_rc {
 	u32			vendor_id;
 	u32			device_id;
 	bool			avail_ib_bar[CDNS_PCIE_RP_MAX_IB];
+	bool                    quirk_retrain_flag;
 };
 
 /**
@@ -414,6 +416,13 @@ static inline void cdns_pcie_rp_writew(struct cdns_pcie *pcie,
 	cdns_pcie_write_sz(addr, 0x2, value);
 }
 
+static inline u16 cdns_pcie_rp_readw(struct cdns_pcie *pcie, u32 reg)
+{
+	void __iomem *addr = pcie->reg_base + CDNS_PCIE_RP_BASE + reg;
+
+	return cdns_pcie_read_sz(addr, 0x2);
+}
+
 /* Endpoint Function register access */
 static inline void cdns_pcie_ep_fn_writeb(struct cdns_pcie *pcie, u8 fn,
 					  u32 reg, u8 value)

drivers/pci/controller/dwc/pci-layerscape-ep.c

@@ -115,10 +115,17 @@ static const struct ls_pcie_ep_drvdata ls2_ep_drvdata = {
 	.dw_pcie_ops = &dw_ls_pcie_ep_ops,
 };
 
+static const struct ls_pcie_ep_drvdata lx2_ep_drvdata = {
+	.func_offset = 0x8000,
+	.ops = &ls_pcie_ep_ops,
+	.dw_pcie_ops = &dw_ls_pcie_ep_ops,
+};
+
 static const struct of_device_id ls_pcie_ep_of_match[] = {
 	{ .compatible = "fsl,ls1046a-pcie-ep", .data = &ls1_ep_drvdata },
 	{ .compatible = "fsl,ls1088a-pcie-ep", .data = &ls2_ep_drvdata },
 	{ .compatible = "fsl,ls2088a-pcie-ep", .data = &ls2_ep_drvdata },
+	{ .compatible = "fsl,lx2160ar2-pcie-ep", .data = &lx2_ep_drvdata },
 	{ },
 };
 

drivers/pci/controller/dwc/pci-layerscape.c

@@ -232,7 +232,7 @@ static const struct of_device_id ls_pcie_of_match[] = {
 	{ },
 };
 
-static int __init ls_pcie_probe(struct platform_device *pdev)
+static int ls_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
@@ -271,10 +271,11 @@ static int __init ls_pcie_probe(struct platform_device *pdev)
 }
 
 static struct platform_driver ls_pcie_driver = {
+	.probe = ls_pcie_probe,
 	.driver = {
 		.name = "layerscape-pcie",
 		.of_match_table = ls_pcie_of_match,
 		.suppress_bind_attrs = true,
 	},
 };
-builtin_platform_driver_probe(ls_pcie_driver, ls_pcie_probe);
+builtin_platform_driver(ls_pcie_driver);

drivers/pci/controller/dwc/pcie-al.c

@@ -314,9 +314,6 @@ static const struct dw_pcie_host_ops al_pcie_host_ops = {
 	.host_init = al_pcie_host_init,
 };
 
-static const struct dw_pcie_ops dw_pcie_ops = {
-};
-
 static int al_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -334,7 +331,6 @@ static int al_pcie_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	pci->dev = dev;
-	pci->ops = &dw_pcie_ops;
 	pci->pp.ops = &al_pcie_host_ops;
 
 	al_pcie->pci = pci;

drivers/pci/controller/dwc/pcie-designware-ep.c

@@ -434,10 +434,8 @@ static void dw_pcie_ep_stop(struct pci_epc *epc)
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 
-	if (!pci->ops->stop_link)
-		return;
-
-	pci->ops->stop_link(pci);
+	if (pci->ops && pci->ops->stop_link)
+		pci->ops->stop_link(pci);
 }
 
 static int dw_pcie_ep_start(struct pci_epc *epc)
@@ -445,7 +443,7 @@ static int dw_pcie_ep_start(struct pci_epc *epc)
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 
-	if (!pci->ops->start_link)
+	if (!pci->ops || !pci->ops->start_link)
 		return -EINVAL;
 
 	return pci->ops->start_link(pci);

drivers/pci/controller/dwc/pcie-designware-host.c

@@ -258,10 +258,8 @@ int dw_pcie_allocate_domains(struct pcie_port *pp)
 
 static void dw_pcie_free_msi(struct pcie_port *pp)
 {
-	if (pp->msi_irq) {
-		irq_set_chained_handler(pp->msi_irq, NULL);
-		irq_set_handler_data(pp->msi_irq, NULL);
-	}
+	if (pp->msi_irq)
+		irq_set_chained_handler_and_data(pp->msi_irq, NULL, NULL);
 
 	irq_domain_remove(pp->msi_domain);
 	irq_domain_remove(pp->irq_domain);
@@ -305,8 +303,13 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	if (cfg_res) {
 		pp->cfg0_size = resource_size(cfg_res);
 		pp->cfg0_base = cfg_res->start;
-	} else if (!pp->va_cfg0_base) {
+
+		pp->va_cfg0_base = devm_pci_remap_cfg_resource(dev, cfg_res);
+		if (IS_ERR(pp->va_cfg0_base))
+			return PTR_ERR(pp->va_cfg0_base);
+	} else {
 		dev_err(dev, "Missing *config* reg space\n");
+		return -ENODEV;
 	}
 
 	if (!pci->dbi_base) {
@@ -322,38 +325,12 @@ int dw_pcie_host_init(struct pcie_port *pp)
 
 	pp->bridge = bridge;
 
-	/* Get the I/O and memory ranges from DT */
-	resource_list_for_each_entry(win, &bridge->windows) {
-		switch (resource_type(win->res)) {
-		case IORESOURCE_IO:
-			pp->io_size = resource_size(win->res);
-			pp->io_bus_addr = win->res->start - win->offset;
-			pp->io_base = pci_pio_to_address(win->res->start);
-			break;
-		case 0:
-			dev_err(dev, "Missing *config* reg space\n");
-			pp->cfg0_size = resource_size(win->res);
-			pp->cfg0_base = win->res->start;
-			if (!pci->dbi_base) {
-				pci->dbi_base = devm_pci_remap_cfgspace(dev,
-								pp->cfg0_base,
-								pp->cfg0_size);
-				if (!pci->dbi_base) {
-					dev_err(dev, "Error with ioremap\n");
-					return -ENOMEM;
-				}
-			}
-			break;
-		}
-	}
-
-	if (!pp->va_cfg0_base) {
-		pp->va_cfg0_base = devm_pci_remap_cfgspace(dev,
-					pp->cfg0_base, pp->cfg0_size);
-		if (!pp->va_cfg0_base) {
-			dev_err(dev, "Error with ioremap in function\n");
-			return -ENOMEM;
-		}
+	/* Get the I/O range from DT */
+	win = resource_list_first_type(&bridge->windows, IORESOURCE_IO);
+	if (win) {
+		pp->io_size = resource_size(win->res);
+		pp->io_bus_addr = win->res->start - win->offset;
+		pp->io_base = pci_pio_to_address(win->res->start);
 	}
 
 	if (pci->link_gen < 1)
@@ -425,7 +402,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	dw_pcie_setup_rc(pp);
 	dw_pcie_msi_init(pp);
 
-	if (!dw_pcie_link_up(pci) && pci->ops->start_link) {
+	if (!dw_pcie_link_up(pci) && pci->ops && pci->ops->start_link) {
 		ret = pci->ops->start_link(pci);
 		if (ret)
 			goto err_free_msi;

drivers/pci/controller/dwc/pcie-designware.c

@@ -141,7 +141,7 @@ u32 dw_pcie_read_dbi(struct dw_pcie *pci, u32 reg, size_t size)
 	int ret;
 	u32 val;
 
-	if (pci->ops->read_dbi)
+	if (pci->ops && pci->ops->read_dbi)
 		return pci->ops->read_dbi(pci, pci->dbi_base, reg, size);
 
 	ret = dw_pcie_read(pci->dbi_base + reg, size, &val);
@@ -156,7 +156,7 @@ void dw_pcie_write_dbi(struct dw_pcie *pci, u32 reg, size_t size, u32 val)
 {
 	int ret;
 
-	if (pci->ops->write_dbi) {
+	if (pci->ops && pci->ops->write_dbi) {
 		pci->ops->write_dbi(pci, pci->dbi_base, reg, size, val);
 		return;
 	}
@@ -171,7 +171,7 @@ void dw_pcie_write_dbi2(struct dw_pcie *pci, u32 reg, size_t size, u32 val)
 {
 	int ret;
 
-	if (pci->ops->write_dbi2) {
+	if (pci->ops && pci->ops->write_dbi2) {
 		pci->ops->write_dbi2(pci, pci->dbi_base2, reg, size, val);
 		return;
 	}
@@ -186,7 +186,7 @@ static u32 dw_pcie_readl_atu(struct dw_pcie *pci, u32 reg)
 	int ret;
 	u32 val;
 
-	if (pci->ops->read_dbi)
+	if (pci->ops && pci->ops->read_dbi)
 		return pci->ops->read_dbi(pci, pci->atu_base, reg, 4);
 
 	ret = dw_pcie_read(pci->atu_base + reg, 4, &val);
@@ -200,7 +200,7 @@ static void dw_pcie_writel_atu(struct dw_pcie *pci, u32 reg, u32 val)
 {
 	int ret;
 
-	if (pci->ops->write_dbi) {
+	if (pci->ops && pci->ops->write_dbi) {
 		pci->ops->write_dbi(pci, pci->atu_base, reg, 4, val);
 		return;
 	}
@@ -225,6 +225,47 @@ static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
 	dw_pcie_writel_atu(pci, offset + reg, val);
 }
 
+static inline u32 dw_pcie_enable_ecrc(u32 val)
+{
+	/*
+	 * DesignWare core version 4.90A has a design issue where the 'TD'
+	 * bit in the Control register-1 of the ATU outbound region acts
+	 * like an override for the ECRC setting, i.e., the presence of TLP
+	 * Digest (ECRC) in the outgoing TLPs is solely determined by this
+	 * bit. This is contrary to the PCIe spec which says that the
+	 * enablement of the ECRC is solely determined by the AER
+	 * registers.
+	 *
+	 * Because of this, even when the ECRC is enabled through AER
+	 * registers, the transactions going through ATU won't have TLP
+	 * Digest as there is no way the PCI core AER code could program
+	 * the TD bit which is specific to the DesignWare core.
+	 *
+	 * The best way to handle this scenario is to program the TD bit
+	 * always. It affects only the traffic from root port to downstream
+	 * devices.
+	 *
+	 * At this point,
+	 * When ECRC is enabled in AER registers, everything works normally
+	 * When ECRC is NOT enabled in AER registers, then,
+	 * on Root Port:- TLP Digest (DWord size) gets appended to each packet
+	 *                even through it is not required. Since downstream
+	 *                TLPs are mostly for configuration accesses and BAR
+	 *                accesses, they are not in critical path and won't
+	 *                have much negative effect on the performance.
+	 * on End Point:- TLP Digest is received for some/all the packets coming
+	 *                from the root port. TLP Digest is ignored because,
+	 *                as per the PCIe Spec r5.0 v1.0 section 2.2.3
+	 *                "TLP Digest Rules", when an endpoint receives TLP
+	 *                Digest when its ECRC check functionality is disabled
+	 *                in AER registers, received TLP Digest is just ignored.
+	 * Since there is no issue or error reported either side, best way to
+	 * handle the scenario is to program TD bit by default.
+	 */
+
+	return val | PCIE_ATU_TD;
+}
+
 static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
 					     int index, int type,
 					     u64 cpu_addr, u64 pci_addr,
@@ -248,6 +289,8 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
 	val = type | PCIE_ATU_FUNC_NUM(func_no);
 	val = upper_32_bits(size - 1) ?
 		val | PCIE_ATU_INCREASE_REGION_SIZE : val;
+	if (pci->version == 0x490A)
+		val = dw_pcie_enable_ecrc(val);
 	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val);
 	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
 				 PCIE_ATU_ENABLE);
@@ -273,7 +316,7 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
 {
 	u32 retries, val;
 
-	if (pci->ops->cpu_addr_fixup)
+	if (pci->ops && pci->ops->cpu_addr_fixup)
 		cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
 
 	if (pci->iatu_unroll_enabled) {
@@ -290,12 +333,19 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
 			   upper_32_bits(cpu_addr));
 	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
 			   lower_32_bits(cpu_addr + size - 1));
+	if (pci->version >= 0x460A)
+		dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_LIMIT,
+				   upper_32_bits(cpu_addr + size - 1));
 	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
 			   lower_32_bits(pci_addr));
 	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
 			   upper_32_bits(pci_addr));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
-			   PCIE_ATU_FUNC_NUM(func_no));
+	val = type | PCIE_ATU_FUNC_NUM(func_no);
+	val = ((upper_32_bits(size - 1)) && (pci->version >= 0x460A)) ?
+		val | PCIE_ATU_INCREASE_REGION_SIZE : val;
+	if (pci->version == 0x490A)
+		val = dw_pcie_enable_ecrc(val);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val);
 	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
 
 	/*
@@ -321,7 +371,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
 
 void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
 				  int type, u64 cpu_addr, u64 pci_addr,
-				  u32 size)
+				  u64 size)
 {
 	__dw_pcie_prog_outbound_atu(pci, func_no, index, type,
 				    cpu_addr, pci_addr, size);
@@ -481,7 +531,7 @@ int dw_pcie_link_up(struct dw_pcie *pci)
 {
 	u32 val;
 
-	if (pci->ops->link_up)
+	if (pci->ops && pci->ops->link_up)
 		return pci->ops->link_up(pci);
 
 	val = readl(pci->dbi_base + PCIE_PORT_DEBUG1);

drivers/pci/controller/dwc/pcie-designware.h

@@ -86,6 +86,7 @@
 #define PCIE_ATU_TYPE_IO		0x2
 #define PCIE_ATU_TYPE_CFG0		0x4
 #define PCIE_ATU_TYPE_CFG1		0x5
+#define PCIE_ATU_TD			BIT(8)
 #define PCIE_ATU_FUNC_NUM(pf)           ((pf) << 20)
 #define PCIE_ATU_CR2			0x908
 #define PCIE_ATU_ENABLE			BIT(31)
@@ -99,6 +100,7 @@
 #define PCIE_ATU_DEV(x)			FIELD_PREP(GENMASK(23, 19), x)
 #define PCIE_ATU_FUNC(x)		FIELD_PREP(GENMASK(18, 16), x)
 #define PCIE_ATU_UPPER_TARGET		0x91C
+#define PCIE_ATU_UPPER_LIMIT		0x924
 
 #define PCIE_MISC_CONTROL_1_OFF		0x8BC
 #define PCIE_DBI_RO_WR_EN		BIT(0)
@@ -297,7 +299,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
 			       u64 size);
 void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
 				  int type, u64 cpu_addr, u64 pci_addr,
-				  u32 size);
+				  u64 size);
 int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
 			     int bar, u64 cpu_addr,
 			     enum dw_pcie_as_type as_type);

drivers/pci/controller/dwc/pcie-qcom.c

@@ -159,8 +159,10 @@ struct qcom_pcie_resources_2_3_3 {
 	struct reset_control *rst[7];
 };
 
+/* 6 clocks typically, 7 for sm8250 */
 struct qcom_pcie_resources_2_7_0 {
-	struct clk_bulk_data clks[6];
+	struct clk_bulk_data clks[7];
+	int num_clks;
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
 	struct clk *pipe_clk;
@@ -398,7 +400,9 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 
 	/* enable external reference clock */
 	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
-	val &= ~PHY_REFCLK_USE_PAD;
+	/* USE_PAD is required only for ipq806x */
+	if (!of_device_is_compatible(node, "qcom,pcie-apq8064"))
+		val &= ~PHY_REFCLK_USE_PAD;
 	val |= PHY_REFCLK_SSP_EN;
 	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
 
@@ -1152,8 +1156,14 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	res->clks[3].id = "bus_slave";
 	res->clks[4].id = "slave_q2a";
 	res->clks[5].id = "tbu";
+	if (of_device_is_compatible(dev->of_node, "qcom,pcie-sm8250")) {
+		res->clks[6].id = "ddrss_sf_tbu";
+		res->num_clks = 7;
+	} else {
+		res->num_clks = 6;
+	}
 
-	ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks);
+	ret = devm_clk_bulk_get(dev, res->num_clks, res->clks);
 	if (ret < 0)
 		return ret;
 
@@ -1175,7 +1185,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 		return ret;
 	}
 
-	ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
+	ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
 	if (ret < 0)
 		goto err_disable_regulators;
 
@@ -1227,7 +1237,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 
 	return 0;
 err_disable_clocks:
-	clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
+	clk_bulk_disable_unprepare(res->num_clks, res->clks);
 err_disable_regulators:
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 
@@ -1238,7 +1248,7 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
 
-	clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
+	clk_bulk_disable_unprepare(res->num_clks, res->clks);
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 }
 

drivers/pci/controller/pci-host-common.c

@@ -64,6 +64,8 @@ int pci_host_common_probe(struct platform_device *pdev)
 	if (!bridge)
 		return -ENOMEM;
 
+	platform_set_drvdata(pdev, bridge);
+
 	of_pci_check_probe_only();
 
 	/* Parse and map our Configuration Space windows */
@@ -78,8 +80,6 @@ int pci_host_common_probe(struct platform_device *pdev)
 	bridge->sysdata = cfg;
 	bridge->ops = (struct pci_ops *)&ops->pci_ops;
 
-	platform_set_drvdata(pdev, bridge);
-
 	return pci_host_probe(bridge);
 }
 EXPORT_SYMBOL_GPL(pci_host_common_probe);

drivers/pci/controller/pci-hyperv.c

@@ -1714,7 +1714,7 @@ static void prepopulate_bars(struct hv_pcibus_device *hbus)
 	 * resumed and suspended again: see hibernation_snapshot() and
 	 * hibernation_platform_enter().
 	 *
-	 * If the memory enable bit is already set, Hyper-V sliently ignores
+	 * If the memory enable bit is already set, Hyper-V silently ignores
 	 * the below BAR updates, and the related PCI device driver can not
 	 * work, because reading from the device register(s) always returns
 	 * 0xFFFFFFFF.

drivers/pci/controller/pci-xgene-msi.c

@@ -384,13 +384,9 @@ static int xgene_msi_hwirq_alloc(unsigned int cpu)
 		if (!msi_group->gic_irq)
 			continue;
 
-		irq_set_chained_handler(msi_group->gic_irq,
-					xgene_msi_isr);
-		err = irq_set_handler_data(msi_group->gic_irq, msi_group);
-		if (err) {
-			pr_err("failed to register GIC IRQ handler\n");
-			return -EINVAL;
-		}
+		irq_set_chained_handler_and_data(msi_group->gic_irq,
+			xgene_msi_isr, msi_group);
+
 		/*
 		 * Statically allocate MSI GIC IRQs to each CPU core.
 		 * With 8-core X-Gene v1, 2 MSI GIC IRQs are allocated

drivers/pci/controller/pci-xgene.c

@@ -173,12 +173,13 @@ static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
 
 	/*
 	 * The v1 controller has a bug in its Configuration Request
-	 * Retry Status (CRS) logic: when CRS is enabled and we read the
-	 * Vendor and Device ID of a non-existent device, the controller
-	 * fabricates return data of 0xFFFF0001 ("device exists but is not
-	 * ready") instead of 0xFFFFFFFF ("device does not exist").  This
-	 * causes the PCI core to retry the read until it times out.
-	 * Avoid this by not claiming to support CRS.
+	 * Retry Status (CRS) logic: when CRS Software Visibility is
+	 * enabled and we read the Vendor and Device ID of a non-existent
+	 * device, the controller fabricates return data of 0xFFFF0001
+	 * ("device exists but is not ready") instead of 0xFFFFFFFF
+	 * ("device does not exist").  This causes the PCI core to retry
+	 * the read until it times out.  Avoid this by not claiming to
+	 * support CRS SV.
 	 */
 	if (pci_is_root_bus(bus) && (port->version == XGENE_PCIE_IP_VER_1) &&
 	    ((where & ~0x3) == XGENE_V1_PCI_EXP_CAP + PCI_EXP_RTCTL))

drivers/pci/controller/pcie-altera-msi.c

@@ -204,8 +204,7 @@ static int altera_msi_remove(struct platform_device *pdev)
 	struct altera_msi *msi = platform_get_drvdata(pdev);
 
 	msi_writel(msi, 0, MSI_INTMASK);
-	irq_set_chained_handler(msi->irq, NULL);
-	irq_set_handler_data(msi->irq, NULL);
+	irq_set_chained_handler_and_data(msi->irq, NULL, NULL);
 
 	altera_free_domains(msi);
 

drivers/pci/controller/pcie-brcmstb.c

@@ -97,6 +97,7 @@
 
 #define PCIE_MISC_REVISION				0x406c
 #define  BRCM_PCIE_HW_REV_33				0x0303
+#define  BRCM_PCIE_HW_REV_3_20				0x0320
 
 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT		0x4070
 #define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK	0xfff00000
@@ -187,6 +188,7 @@
 struct brcm_pcie;
 static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val);
 static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val);
+static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val);
 static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val);
 static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val);
 
@@ -203,6 +205,7 @@ enum {
 
 enum pcie_type {
 	GENERIC,
+	BCM4908,
 	BCM7278,
 	BCM2711,
 };
@@ -227,6 +230,13 @@ static const struct pcie_cfg_data generic_cfg = {
 	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
 };
 
+static const struct pcie_cfg_data bcm4908_cfg = {
+	.offsets	= pcie_offsets,
+	.type		= BCM4908,
+	.perst_set	= brcm_pcie_perst_set_4908,
+	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
+};
+
 static const int pcie_offset_bcm7278[] = {
 	[RGR1_SW_INIT_1] = 0xc010,
 	[EXT_CFG_INDEX] = 0x9000,
@@ -279,6 +289,7 @@ struct brcm_pcie {
 	const int		*reg_offsets;
 	enum pcie_type		type;
 	struct reset_control	*rescal;
+	struct reset_control	*perst_reset;
 	int			num_memc;
 	u64			memc_size[PCIE_BRCM_MAX_MEMC];
 	u32			hw_rev;
@@ -603,8 +614,7 @@ static void brcm_msi_remove(struct brcm_pcie *pcie)
 
 	if (!msi)
 		return;
-	irq_set_chained_handler(msi->irq, NULL);
-	irq_set_handler_data(msi->irq, NULL);
+	irq_set_chained_handler_and_data(msi->irq, NULL, NULL);
 	brcm_free_domains(msi);
 }
 
@@ -735,6 +745,17 @@ static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32
 	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 }
 
+static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val)
+{
+	if (WARN_ONCE(!pcie->perst_reset, "missing PERST# reset controller\n"))
+		return;
+
+	if (val)
+		reset_control_assert(pcie->perst_reset);
+	else
+		reset_control_deassert(pcie->perst_reset);
+}
+
 static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val)
 {
 	u32 tmp;
@@ -1194,6 +1215,7 @@ static int brcm_pcie_remove(struct platform_device *pdev)
 
 static const struct of_device_id brcm_pcie_match[] = {
 	{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
+	{ .compatible = "brcm,bcm4908-pcie", .data = &bcm4908_cfg },
 	{ .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
 	{ .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
 	{ .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
@@ -1250,6 +1272,11 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 		clk_disable_unprepare(pcie->clk);
 		return PTR_ERR(pcie->rescal);
 	}
+	pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst");
+	if (IS_ERR(pcie->perst_reset)) {
+		clk_disable_unprepare(pcie->clk);
+		return PTR_ERR(pcie->perst_reset);
+	}
 
 	ret = reset_control_deassert(pcie->rescal);
 	if (ret)
@@ -1267,6 +1294,10 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 		goto fail;
 
 	pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
+	if (pcie->type == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
+		dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n");
+		goto fail;
+	}
 
 	msi_np = of_parse_phandle(pcie->np, "msi-parent", 0);
 	if (pci_msi_enabled() && msi_np == pcie->np) {

drivers/pci/controller/pcie-mediatek.c

@@ -1035,14 +1035,14 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
 		err = of_pci_get_devfn(child);
 		if (err < 0) {
 			dev_err(dev, "failed to parse devfn: %d\n", err);
-			return err;
+			goto error_put_node;
 		}
 
 		slot = PCI_SLOT(err);
 
 		err = mtk_pcie_parse_port(pcie, child, slot);
 		if (err)
-			return err;
+			goto error_put_node;
 	}
 
 	err = mtk_pcie_subsys_powerup(pcie);
@@ -1058,6 +1058,9 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
 		mtk_pcie_subsys_powerdown(pcie);
 
 	return 0;
+error_put_node:
+	of_node_put(child);
+	return err;
 }
 
 static int mtk_pcie_probe(struct platform_device *pdev)

drivers/pci/controller/pcie-rcar-host.c

@@ -735,7 +735,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie_host *host)
 	}
 
 	/* setup MSI data target */
-	msi->pages = __get_free_pages(GFP_KERNEL, 0);
+	msi->pages = __get_free_pages(GFP_KERNEL | GFP_DMA32, 0);
 	rcar_pcie_hw_enable_msi(host);
 
 	return 0;

drivers/pci/controller/pcie-rockchip.c

@@ -82,7 +82,7 @@ int rockchip_pcie_parse_dt(struct rockchip_pcie *rockchip)
 	}
 
 	rockchip->mgmt_sticky_rst = devm_reset_control_get_exclusive(dev,
-								     "mgmt-sticky");
+								"mgmt-sticky");
 	if (IS_ERR(rockchip->mgmt_sticky_rst)) {
 		if (PTR_ERR(rockchip->mgmt_sticky_rst) != -EPROBE_DEFER)
 			dev_err(dev, "missing mgmt-sticky reset property in node\n");
@@ -118,11 +118,11 @@ int rockchip_pcie_parse_dt(struct rockchip_pcie *rockchip)
 	}
 
 	if (rockchip->is_rc) {
-		rockchip->ep_gpio = devm_gpiod_get(dev, "ep", GPIOD_OUT_HIGH);
-		if (IS_ERR(rockchip->ep_gpio)) {
-			dev_err(dev, "missing ep-gpios property in node\n");
-			return PTR_ERR(rockchip->ep_gpio);
-		}
+		rockchip->ep_gpio = devm_gpiod_get_optional(dev, "ep",
+							    GPIOD_OUT_HIGH);
+		if (IS_ERR(rockchip->ep_gpio))
+			return dev_err_probe(dev, PTR_ERR(rockchip->ep_gpio),
+					     "failed to get ep GPIO\n");
 	}
 
 	rockchip->aclk_pcie = devm_clk_get(dev, "aclk");

drivers/pci/controller/pcie-tango.c

-// SPDX-License-Identifier: GPL-2.0
-#include <linux/irqchip/chained_irq.h>
-#include <linux/irqdomain.h>
-#include <linux/pci-ecam.h>
-#include <linux/delay.h>
-#include <linux/msi.h>
-#include <linux/of_address.h>
-
-#define MSI_MAX			256
-
-#define SMP8759_MUX		0x48
-#define SMP8759_TEST_OUT	0x74
-#define SMP8759_DOORBELL	0x7c
-#define SMP8759_STATUS		0x80
-#define SMP8759_ENABLE		0xa0
-
-struct tango_pcie {
-	DECLARE_BITMAP(used_msi, MSI_MAX);
-	u64			msi_doorbell;
-	spinlock_t		used_msi_lock;
-	void __iomem		*base;
-	struct irq_domain	*dom;
-};
-
-static void tango_msi_isr(struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	struct tango_pcie *pcie = irq_desc_get_handler_data(desc);
-	unsigned long status, base, virq, idx, pos = 0;
-
-	chained_irq_enter(chip, desc);
-	spin_lock(&pcie->used_msi_lock);
-
-	while ((pos = find_next_bit(pcie->used_msi, MSI_MAX, pos)) < MSI_MAX) {
-		base = round_down(pos, 32);
-		status = readl_relaxed(pcie->base + SMP8759_STATUS + base / 8);
-		for_each_set_bit(idx, &status, 32) {
-			virq = irq_find_mapping(pcie->dom, base + idx);
-			generic_handle_irq(virq);
-		}
-		pos = base + 32;
-	}
-
-	spin_unlock(&pcie->used_msi_lock);
-	chained_irq_exit(chip, desc);
-}
-
-static void tango_ack(struct irq_data *d)
-{
-	struct tango_pcie *pcie = d->chip_data;
-	u32 offset = (d->hwirq / 32) * 4;
-	u32 bit = BIT(d->hwirq % 32);
-
-	writel_relaxed(bit, pcie->base + SMP8759_STATUS + offset);
-}
-
-static void update_msi_enable(struct irq_data *d, bool unmask)
-{
-	unsigned long flags;
-	struct tango_pcie *pcie = d->chip_data;
-	u32 offset = (d->hwirq / 32) * 4;
-	u32 bit = BIT(d->hwirq % 32);
-	u32 val;
-
-	spin_lock_irqsave(&pcie->used_msi_lock, flags);
-	val = readl_relaxed(pcie->base + SMP8759_ENABLE + offset);
-	val = unmask ? val | bit : val & ~bit;
-	writel_relaxed(val, pcie->base + SMP8759_ENABLE + offset);
-	spin_unlock_irqrestore(&pcie->used_msi_lock, flags);
-}
-
-static void tango_mask(struct irq_data *d)
-{
-	update_msi_enable(d, false);
-}
-
-static void tango_unmask(struct irq_data *d)
-{
-	update_msi_enable(d, true);
-}
-
-static int tango_set_affinity(struct irq_data *d, const struct cpumask *mask,
-			      bool force)
-{
-	return -EINVAL;
-}
-
-static void tango_compose_msi_msg(struct irq_data *d, struct msi_msg *msg)
-{
-	struct tango_pcie *pcie = d->chip_data;
-	msg->address_lo = lower_32_bits(pcie->msi_doorbell);
-	msg->address_hi = upper_32_bits(pcie->msi_doorbell);
-	msg->data = d->hwirq;
-}
-
-static struct irq_chip tango_chip = {
-	.irq_ack		= tango_ack,
-	.irq_mask		= tango_mask,
-	.irq_unmask		= tango_unmask,
-	.irq_set_affinity	= tango_set_affinity,
-	.irq_compose_msi_msg	= tango_compose_msi_msg,
-};
-
-static void msi_ack(struct irq_data *d)
-{
-	irq_chip_ack_parent(d);
-}
-
-static void msi_mask(struct irq_data *d)
-{
-	pci_msi_mask_irq(d);
-	irq_chip_mask_parent(d);
-}
-
-static void msi_unmask(struct irq_data *d)
-{
-	pci_msi_unmask_irq(d);
-	irq_chip_unmask_parent(d);
-}
-
-static struct irq_chip msi_chip = {
-	.name = "MSI",
-	.irq_ack = msi_ack,
-	.irq_mask = msi_mask,
-	.irq_unmask = msi_unmask,
-};
-
-static struct msi_domain_info msi_dom_info = {
-	.flags	= MSI_FLAG_PCI_MSIX
-		| MSI_FLAG_USE_DEF_DOM_OPS
-		| MSI_FLAG_USE_DEF_CHIP_OPS,
-	.chip	= &msi_chip,
-};
-
-static int tango_irq_domain_alloc(struct irq_domain *dom, unsigned int virq,
-				  unsigned int nr_irqs, void *args)
-{
-	struct tango_pcie *pcie = dom->host_data;
-	unsigned long flags;
-	int pos;
-
-	spin_lock_irqsave(&pcie->used_msi_lock, flags);
-	pos = find_first_zero_bit(pcie->used_msi, MSI_MAX);
-	if (pos >= MSI_MAX) {
-		spin_unlock_irqrestore(&pcie->used_msi_lock, flags);
-		return -ENOSPC;
-	}
-	__set_bit(pos, pcie->used_msi);
-	spin_unlock_irqrestore(&pcie->used_msi_lock, flags);
-	irq_domain_set_info(dom, virq, pos, &tango_chip,
-			pcie, handle_edge_irq, NULL, NULL);
-
-	return 0;
-}
-
-static void tango_irq_domain_free(struct irq_domain *dom, unsigned int virq,
-				  unsigned int nr_irqs)
-{
-	unsigned long flags;
-	struct irq_data *d = irq_domain_get_irq_data(dom, virq);
-	struct tango_pcie *pcie = d->chip_data;
-
-	spin_lock_irqsave(&pcie->used_msi_lock, flags);
-	__clear_bit(d->hwirq, pcie->used_msi);
-	spin_unlock_irqrestore(&pcie->used_msi_lock, flags);
-}
-
-static const struct irq_domain_ops dom_ops = {
-	.alloc	= tango_irq_domain_alloc,
-	.free	= tango_irq_domain_free,
-};
-
-static int smp8759_config_read(struct pci_bus *bus, unsigned int devfn,
-			       int where, int size, u32 *val)
-{
-	struct pci_config_window *cfg = bus->sysdata;
-	struct tango_pcie *pcie = dev_get_drvdata(cfg->parent);
-	int ret;
-
-	/* Reads in configuration space outside devfn 0 return garbage */
-	if (devfn != 0)
-		return PCIBIOS_FUNC_NOT_SUPPORTED;
-
-	/*
-	 * PCI config and MMIO accesses are muxed.  Linux doesn't have a
-	 * mutual exclusion mechanism for config vs. MMIO accesses, so
-	 * concurrent accesses may cause corruption.
-	 */
-	writel_relaxed(1, pcie->base + SMP8759_MUX);
-	ret = pci_generic_config_read(bus, devfn, where, size, val);
-	writel_relaxed(0, pcie->base + SMP8759_MUX);
-
-	return ret;
-}
-
-static int smp8759_config_write(struct pci_bus *bus, unsigned int devfn,
-				int where, int size, u32 val)
-{
-	struct pci_config_window *cfg = bus->sysdata;
-	struct tango_pcie *pcie = dev_get_drvdata(cfg->parent);
-	int ret;
-
-	writel_relaxed(1, pcie->base + SMP8759_MUX);
-	ret = pci_generic_config_write(bus, devfn, where, size, val);
-	writel_relaxed(0, pcie->base + SMP8759_MUX);
-
-	return ret;
-}
-
-static const struct pci_ecam_ops smp8759_ecam_ops = {
-	.pci_ops	= {
-		.map_bus	= pci_ecam_map_bus,
-		.read		= smp8759_config_read,
-		.write		= smp8759_config_write,
-	}
-};
-
-static int tango_pcie_link_up(struct tango_pcie *pcie)
-{
-	void __iomem *test_out = pcie->base + SMP8759_TEST_OUT;
-	int i;
-
-	writel_relaxed(16, test_out);
-	for (i = 0; i < 10; ++i) {
-		u32 ltssm_state = readl_relaxed(test_out) >> 8;
-		if ((ltssm_state & 0x1f) == 0xf) /* L0 */
-			return 1;
-		usleep_range(3000, 4000);
-	}
-
-	return 0;
-}
-
-static int tango_pcie_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct tango_pcie *pcie;
-	struct resource *res;
-	struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
-	struct irq_domain *msi_dom, *irq_dom;
-	struct of_pci_range_parser parser;
-	struct of_pci_range range;
-	int virq, offset;
-
-	dev_warn(dev, "simultaneous PCI config and MMIO accesses may cause data corruption\n");
-	add_taint(TAINT_CRAP, LOCKDEP_STILL_OK);
-
-	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
-	if (!pcie)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	pcie->base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(pcie->base))
-		return PTR_ERR(pcie->base);
-
-	platform_set_drvdata(pdev, pcie);
-
-	if (!tango_pcie_link_up(pcie))
-		return -ENODEV;
-
-	if (of_pci_dma_range_parser_init(&parser, dev->of_node) < 0)
-		return -ENOENT;
-
-	if (of_pci_range_parser_one(&parser, &range) == NULL)
-		return -ENOENT;
-
-	range.pci_addr += range.size;
-	pcie->msi_doorbell = range.pci_addr + res->start + SMP8759_DOORBELL;
-
-	for (offset = 0; offset < MSI_MAX / 8; offset += 4)
-		writel_relaxed(0, pcie->base + SMP8759_ENABLE + offset);
-
-	virq = platform_get_irq(pdev, 1);
-	if (virq < 0)
-		return virq;
-
-	irq_dom = irq_domain_create_linear(fwnode, MSI_MAX, &dom_ops, pcie);
-	if (!irq_dom) {
-		dev_err(dev, "Failed to create IRQ domain\n");
-		return -ENOMEM;
-	}
-
-	msi_dom = pci_msi_create_irq_domain(fwnode, &msi_dom_info, irq_dom);
-	if (!msi_dom) {
-		dev_err(dev, "Failed to create MSI domain\n");
-		irq_domain_remove(irq_dom);
-		return -ENOMEM;
-	}
-
-	pcie->dom = irq_dom;
-	spin_lock_init(&pcie->used_msi_lock);
-	irq_set_chained_handler_and_data(virq, tango_msi_isr, pcie);
-
-	return pci_host_common_probe(pdev);
-}
-
-static const struct of_device_id tango_pcie_ids[] = {
-	{
-		.compatible = "sigma,smp8759-pcie",
-		.data = &smp8759_ecam_ops,
-	},
-	{ },
-};
-
-static struct platform_driver tango_pcie_driver = {
-	.probe	= tango_pcie_probe,
-	.driver	= {
-		.name = KBUILD_MODNAME,
-		.of_match_table = tango_pcie_ids,
-		.suppress_bind_attrs = true,
-	},
-};
-builtin_platform_driver(tango_pcie_driver);
-
-/*
- * The root complex advertises the wrong device class.
- * Header Type 1 is for PCI-to-PCI bridges.
- */
-static void tango_fixup_class(struct pci_dev *dev)
-{
-	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIGMA, 0x0024, tango_fixup_class);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIGMA, 0x0028, tango_fixup_class);
-
-/*
- * The root complex exposes a "fake" BAR, which is used to filter
- * bus-to-system accesses.  Only accesses within the range defined by this
- * BAR are forwarded to the host, others are ignored.
- *
- * By default, the DMA framework expects an identity mapping, and DRAM0 is
- * mapped at 0x80000000.
- */
-static void tango_fixup_bar(struct pci_dev *dev)
-{
-	dev->non_compliant_bars = true;
-	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x80000000);
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIGMA, 0x0024, tango_fixup_bar);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIGMA, 0x0028, tango_fixup_bar);

drivers/pci/controller/pcie-xilinx-cpm.c

@@ -404,6 +404,7 @@ static int xilinx_cpm_pcie_init_irq_domain(struct xilinx_cpm_pcie_port *port)
 	return 0;
 out:
 	xilinx_cpm_free_irq_domains(port);
+	of_node_put(pcie_intc_node);
 	dev_err(dev, "Failed to allocate IRQ domains\n");
 
 	return -ENOMEM;

drivers/pci/endpoint/functions/Kconfig

@@ -12,3 +12,16 @@ config PCI_EPF_TEST
 	   for PCI Endpoint.
 
 	   If in doubt, say "N" to disable Endpoint test driver.
+
+config PCI_EPF_NTB
+	tristate "PCI Endpoint NTB driver"
+	depends on PCI_ENDPOINT
+	select CONFIGFS_FS
+	help
+	  Select this configuration option to enable the Non-Transparent
+	  Bridge (NTB) driver for PCI Endpoint. NTB driver implements NTB
+	  controller functionality using multiple PCIe endpoint instances.
+	  It can support NTB endpoint function devices created using
+	  device tree.
+
+	  If in doubt, say "N" to disable Endpoint NTB driver.

drivers/pci/endpoint/functions/Makefile

@@ -4,3 +4,4 @@
 #
 
 obj-$(CONFIG_PCI_EPF_TEST)		+= pci-epf-test.o
+obj-$(CONFIG_PCI_EPF_NTB)		+= pci-epf-ntb.o

drivers/pci/endpoint/functions/pci-epf-test.c

@@ -619,7 +619,8 @@ static void pci_epf_test_unbind(struct pci_epf *epf)
 
 		if (epf_test->reg[bar]) {
 			pci_epc_clear_bar(epc, epf->func_no, epf_bar);
-			pci_epf_free_space(epf, epf_test->reg[bar], bar);
+			pci_epf_free_space(epf, epf_test->reg[bar], bar,
+					   PRIMARY_INTERFACE);
 		}
 	}
 }
@@ -651,7 +652,8 @@ static int pci_epf_test_set_bar(struct pci_epf *epf)
 
 		ret = pci_epc_set_bar(epc, epf->func_no, epf_bar);
 		if (ret) {
-			pci_epf_free_space(epf, epf_test->reg[bar], bar);
+			pci_epf_free_space(epf, epf_test->reg[bar], bar,
+					   PRIMARY_INTERFACE);
 			dev_err(dev, "Failed to set BAR%d\n", bar);
 			if (bar == test_reg_bar)
 				return ret;
@@ -771,7 +773,7 @@ static int pci_epf_test_alloc_space(struct pci_epf *epf)
 	}
 
 	base = pci_epf_alloc_space(epf, test_reg_size, test_reg_bar,
-				   epc_features->align);
+				   epc_features->align, PRIMARY_INTERFACE);
 	if (!base) {
 		dev_err(dev, "Failed to allocated register space\n");
 		return -ENOMEM;
@@ -789,7 +791,8 @@ static int pci_epf_test_alloc_space(struct pci_epf *epf)
 			continue;
 
 		base = pci_epf_alloc_space(epf, bar_size[bar], bar,
-					   epc_features->align);
+					   epc_features->align,
+					   PRIMARY_INTERFACE);
 		if (!base)
 			dev_err(dev, "Failed to allocate space for BAR%d\n",
 				bar);
@@ -834,6 +837,8 @@ static int pci_epf_test_bind(struct pci_epf *epf)
 		linkup_notifier = epc_features->linkup_notifier;
 		core_init_notifier = epc_features->core_init_notifier;
 		test_reg_bar = pci_epc_get_first_free_bar(epc_features);
+		if (test_reg_bar < 0)
+			return -EINVAL;
 		pci_epf_configure_bar(epf, epc_features);
 	}
 

drivers/pci/endpoint/pci-ep-cfs.c

@@ -21,6 +21,9 @@ static struct config_group *controllers_group;
 
 struct pci_epf_group {
 	struct config_group group;
+	struct config_group primary_epc_group;
+	struct config_group secondary_epc_group;
+	struct delayed_work cfs_work;
 	struct pci_epf *epf;
 	int index;
 };
@@ -41,6 +44,127 @@ static inline struct pci_epc_group *to_pci_epc_group(struct config_item *item)
 	return container_of(to_config_group(item), struct pci_epc_group, group);
 }
 
+static int pci_secondary_epc_epf_link(struct config_item *epf_item,
+				      struct config_item *epc_item)
+{
+	int ret;
+	struct pci_epf_group *epf_group = to_pci_epf_group(epf_item->ci_parent);
+	struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
+	struct pci_epc *epc = epc_group->epc;
+	struct pci_epf *epf = epf_group->epf;
+
+	ret = pci_epc_add_epf(epc, epf, SECONDARY_INTERFACE);
+	if (ret)
+		return ret;
+
+	ret = pci_epf_bind(epf);
+	if (ret) {
+		pci_epc_remove_epf(epc, epf, SECONDARY_INTERFACE);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void pci_secondary_epc_epf_unlink(struct config_item *epc_item,
+					 struct config_item *epf_item)
+{
+	struct pci_epf_group *epf_group = to_pci_epf_group(epf_item->ci_parent);
+	struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
+	struct pci_epc *epc;
+	struct pci_epf *epf;
+
+	WARN_ON_ONCE(epc_group->start);
+
+	epc = epc_group->epc;
+	epf = epf_group->epf;
+	pci_epf_unbind(epf);
+	pci_epc_remove_epf(epc, epf, SECONDARY_INTERFACE);
+}
+
+static struct configfs_item_operations pci_secondary_epc_item_ops = {
+	.allow_link	= pci_secondary_epc_epf_link,
+	.drop_link	= pci_secondary_epc_epf_unlink,
+};
+
+static const struct config_item_type pci_secondary_epc_type = {
+	.ct_item_ops	= &pci_secondary_epc_item_ops,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_group
+*pci_ep_cfs_add_secondary_group(struct pci_epf_group *epf_group)
+{
+	struct config_group *secondary_epc_group;
+
+	secondary_epc_group = &epf_group->secondary_epc_group;
+	config_group_init_type_name(secondary_epc_group, "secondary",
+				    &pci_secondary_epc_type);
+	configfs_register_group(&epf_group->group, secondary_epc_group);
+
+	return secondary_epc_group;
+}
+
+static int pci_primary_epc_epf_link(struct config_item *epf_item,
+				    struct config_item *epc_item)
+{
+	int ret;
+	struct pci_epf_group *epf_group = to_pci_epf_group(epf_item->ci_parent);
+	struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
+	struct pci_epc *epc = epc_group->epc;
+	struct pci_epf *epf = epf_group->epf;
+
+	ret = pci_epc_add_epf(epc, epf, PRIMARY_INTERFACE);
+	if (ret)
+		return ret;
+
+	ret = pci_epf_bind(epf);
+	if (ret) {
+		pci_epc_remove_epf(epc, epf, PRIMARY_INTERFACE);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void pci_primary_epc_epf_unlink(struct config_item *epc_item,
+				       struct config_item *epf_item)
+{
+	struct pci_epf_group *epf_group = to_pci_epf_group(epf_item->ci_parent);
+	struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
+	struct pci_epc *epc;
+	struct pci_epf *epf;
+
+	WARN_ON_ONCE(epc_group->start);
+
+	epc = epc_group->epc;
+	epf = epf_group->epf;
+	pci_epf_unbind(epf);
+	pci_epc_remove_epf(epc, epf, PRIMARY_INTERFACE);
+}
+
+static struct configfs_item_operations pci_primary_epc_item_ops = {
+	.allow_link	= pci_primary_epc_epf_link,
+	.drop_link	= pci_primary_epc_epf_unlink,
+};
+
+static const struct config_item_type pci_primary_epc_type = {
+	.ct_item_ops	= &pci_primary_epc_item_ops,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_group
+*pci_ep_cfs_add_primary_group(struct pci_epf_group *epf_group)
+{
+	struct config_group *primary_epc_group = &epf_group->primary_epc_group;
+
+	config_group_init_type_name(primary_epc_group, "primary",
+				    &pci_primary_epc_type);
+	configfs_register_group(&epf_group->group, primary_epc_group);
+
+	return primary_epc_group;
+}
+
 static ssize_t pci_epc_start_store(struct config_item *item, const char *page,
 				   size_t len)
 {
@@ -94,13 +218,13 @@ static int pci_epc_epf_link(struct config_item *epc_item,
 	struct pci_epc *epc = epc_group->epc;
 	struct pci_epf *epf = epf_group->epf;
 
-	ret = pci_epc_add_epf(epc, epf);
+	ret = pci_epc_add_epf(epc, epf, PRIMARY_INTERFACE);
 	if (ret)
 		return ret;
 
 	ret = pci_epf_bind(epf);
 	if (ret) {
-		pci_epc_remove_epf(epc, epf);
+		pci_epc_remove_epf(epc, epf, PRIMARY_INTERFACE);
 		return ret;
 	}
 
@@ -120,7 +244,7 @@ static void pci_epc_epf_unlink(struct config_item *epc_item,
 	epc = epc_group->epc;
 	epf = epf_group->epf;
 	pci_epf_unbind(epf);
-	pci_epc_remove_epf(epc, epf);
+	pci_epc_remove_epf(epc, epf, PRIMARY_INTERFACE);
 }
 
 static struct configfs_item_operations pci_epc_item_ops = {
@@ -366,12 +490,53 @@ static struct configfs_item_operations pci_epf_ops = {
 	.release		= pci_epf_release,
 };
 
+static struct config_group *pci_epf_type_make(struct config_group *group,
+					      const char *name)
+{
+	struct pci_epf_group *epf_group = to_pci_epf_group(&group->cg_item);
+	struct config_group *epf_type_group;
+
+	epf_type_group = pci_epf_type_add_cfs(epf_group->epf, group);
+	return epf_type_group;
+}
+
+static void pci_epf_type_drop(struct config_group *group,
+			      struct config_item *item)
+{
+	config_item_put(item);
+}
+
+static struct configfs_group_operations pci_epf_type_group_ops = {
+	.make_group     = &pci_epf_type_make,
+	.drop_item      = &pci_epf_type_drop,
+};
+
 static const struct config_item_type pci_epf_type = {
+	.ct_group_ops	= &pci_epf_type_group_ops,
 	.ct_item_ops	= &pci_epf_ops,
 	.ct_attrs	= pci_epf_attrs,
 	.ct_owner	= THIS_MODULE,
 };
 
+static void pci_epf_cfs_work(struct work_struct *work)
+{
+	struct pci_epf_group *epf_group;
+	struct config_group *group;
+
+	epf_group = container_of(work, struct pci_epf_group, cfs_work.work);
+	group = pci_ep_cfs_add_primary_group(epf_group);
+	if (IS_ERR(group)) {
+		pr_err("failed to create 'primary' EPC interface\n");
+		return;
+	}
+
+	group = pci_ep_cfs_add_secondary_group(epf_group);
+	if (IS_ERR(group)) {
+		pr_err("failed to create 'secondary' EPC interface\n");
+		return;
+	}
+}
+
 static struct config_group *pci_epf_make(struct config_group *group,
 					 const char *name)
 {
@@ -410,10 +575,15 @@ static struct config_group *pci_epf_make(struct config_group *group,
 		goto free_name;
 	}
 
+	epf->group = &epf_group->group;
 	epf_group->epf = epf;
 
 	kfree(epf_name);
 
+	INIT_DELAYED_WORK(&epf_group->cfs_work, pci_epf_cfs_work);
+	queue_delayed_work(system_wq, &epf_group->cfs_work,
+			   msecs_to_jiffies(1));
+
 	return &epf_group->group;
 
 free_name:

drivers/pci/endpoint/pci-epc-core.c

@@ -87,24 +87,50 @@ EXPORT_SYMBOL_GPL(pci_epc_get);
  * pci_epc_get_first_free_bar() - helper to get first unreserved BAR
  * @epc_features: pci_epc_features structure that holds the reserved bar bitmap
  *
- * Invoke to get the first unreserved BAR that can be used for endpoint
+ * Invoke to get the first unreserved BAR that can be used by the endpoint
  * function. For any incorrect value in reserved_bar return '0'.
  */
-unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features
-					*epc_features)
+enum pci_barno
+pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features)
 {
-	int free_bar;
+	return pci_epc_get_next_free_bar(epc_features, BAR_0);
+}
+EXPORT_SYMBOL_GPL(pci_epc_get_first_free_bar);
+
+/**
+ * pci_epc_get_next_free_bar() - helper to get unreserved BAR starting from @bar
+ * @epc_features: pci_epc_features structure that holds the reserved bar bitmap
+ * @bar: the starting BAR number from where unreserved BAR should be searched
+ *
+ * Invoke to get the next unreserved BAR starting from @bar that can be used
+ * for endpoint function. For any incorrect value in reserved_bar return '0'.
+ */
+enum pci_barno pci_epc_get_next_free_bar(const struct pci_epc_features
+					 *epc_features, enum pci_barno bar)
+{
+	unsigned long free_bar;
 
 	if (!epc_features)
-		return 0;
+		return BAR_0;
+
+	/* If 'bar - 1' is a 64-bit BAR, move to the next BAR */
+	if ((epc_features->bar_fixed_64bit << 1) & 1 << bar)
+		bar++;
+
+	/* Find if the reserved BAR is also a 64-bit BAR */
+	free_bar = epc_features->reserved_bar & epc_features->bar_fixed_64bit;
 
-	free_bar = ffz(epc_features->reserved_bar);
+	/* Set the adjacent bit if the reserved BAR is also a 64-bit BAR */
+	free_bar <<= 1;
+	free_bar |= epc_features->reserved_bar;
+
+	free_bar = find_next_zero_bit(&free_bar, 6, bar);
 	if (free_bar > 5)
-		return 0;
+		return NO_BAR;
 
 	return free_bar;
 }
-EXPORT_SYMBOL_GPL(pci_epc_get_first_free_bar);
+EXPORT_SYMBOL_GPL(pci_epc_get_next_free_bar);
 
 /**
  * pci_epc_get_features() - get the features supported by EPC
@@ -204,6 +230,47 @@ int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no,
 }
 EXPORT_SYMBOL_GPL(pci_epc_raise_irq);
 
+/**
+ * pci_epc_map_msi_irq() - Map physical address to MSI address and return
+ *                         MSI data
+ * @epc: the EPC device which has the MSI capability
+ * @func_no: the physical endpoint function number in the EPC device
+ * @phys_addr: the physical address of the outbound region
+ * @interrupt_num: the MSI interrupt number
+ * @entry_size: Size of Outbound address region for each interrupt
+ * @msi_data: the data that should be written in order to raise MSI interrupt
+ *            with interrupt number as 'interrupt num'
+ * @msi_addr_offset: Offset of MSI address from the aligned outbound address
+ *                   to which the MSI address is mapped
+ *
+ * Invoke to map physical address to MSI address and return MSI data. The
+ * physical address should be an address in the outbound region. This is
+ * required to implement doorbell functionality of NTB wherein EPC on either
+ * side of the interface (primary and secondary) can directly write to the
+ * physical address (in outbound region) of the other interface to ring
+ * doorbell.
+ */
+int pci_epc_map_msi_irq(struct pci_epc *epc, u8 func_no, phys_addr_t phys_addr,
+			u8 interrupt_num, u32 entry_size, u32 *msi_data,
+			u32 *msi_addr_offset)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(epc))
+		return -EINVAL;
+
+	if (!epc->ops->map_msi_irq)
+		return -EINVAL;
+
+	mutex_lock(&epc->lock);
+	ret = epc->ops->map_msi_irq(epc, func_no, phys_addr, interrupt_num,
+				    entry_size, msi_data, msi_addr_offset);
+	mutex_unlock(&epc->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_map_msi_irq);
+
 /**
  * pci_epc_get_msi() - get the number of MSI interrupt numbers allocated
  * @epc: the EPC device to which MSI interrupts was requested
@@ -467,21 +534,28 @@ EXPORT_SYMBOL_GPL(pci_epc_write_header);
  * pci_epc_add_epf() - bind PCI endpoint function to an endpoint controller
  * @epc: the EPC device to which the endpoint function should be added
  * @epf: the endpoint function to be added
+ * @type: Identifies if the EPC is connected to the primary or secondary
+ *        interface of EPF
  *
  * A PCI endpoint device can have one or more functions. In the case of PCIe,
  * the specification allows up to 8 PCIe endpoint functions. Invoke
  * pci_epc_add_epf() to add a PCI endpoint function to an endpoint controller.
  */
-int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf)
+int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf,
+		    enum pci_epc_interface_type type)
 {
+	struct list_head *list;
 	u32 func_no;
 	int ret = 0;
 
-	if (epf->epc)
+	if (IS_ERR_OR_NULL(epc))
+		return -EINVAL;
+
+	if (type == PRIMARY_INTERFACE && epf->epc)
 		return -EBUSY;
 
-	if (IS_ERR(epc))
-		return -EINVAL;
+	if (type == SECONDARY_INTERFACE && epf->sec_epc)
+		return -EBUSY;
 
 	mutex_lock(&epc->lock);
 	func_no = find_first_zero_bit(&epc->function_num_map,
@@ -498,11 +572,17 @@ int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf)
 	}
 
 	set_bit(func_no, &epc->function_num_map);
-	epf->func_no = func_no;
-	epf->epc = epc;
-
-	list_add_tail(&epf->list, &epc->pci_epf);
+	if (type == PRIMARY_INTERFACE) {
+		epf->func_no = func_no;
+		epf->epc = epc;
+		list = &epf->list;
+	} else {
+		epf->sec_epc_func_no = func_no;
+		epf->sec_epc = epc;
+		list = &epf->sec_epc_list;
+	}
 
+	list_add_tail(list, &epc->pci_epf);
 ret:
 	mutex_unlock(&epc->lock);
 
@@ -517,14 +597,26 @@ EXPORT_SYMBOL_GPL(pci_epc_add_epf);
  *
  * Invoke to remove PCI endpoint function from the endpoint controller.
  */
-void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf)
+void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf,
+			enum pci_epc_interface_type type)
 {
+	struct list_head *list;
+	u32 func_no = 0;
+
 	if (!epc || IS_ERR(epc) || !epf)
 		return;
 
+	if (type == PRIMARY_INTERFACE) {
+		func_no = epf->func_no;
+		list = &epf->list;
+	} else {
+		func_no = epf->sec_epc_func_no;
+		list = &epf->sec_epc_list;
+	}
+
 	mutex_lock(&epc->lock);
-	clear_bit(epf->func_no, &epc->function_num_map);
-	list_del(&epf->list);
+	clear_bit(func_no, &epc->function_num_map);
+	list_del(list);
 	epf->epc = NULL;
 	mutex_unlock(&epc->lock);
 }

drivers/pci/endpoint/pci-epf-core.c

@@ -20,6 +20,38 @@ static DEFINE_MUTEX(pci_epf_mutex);
 static struct bus_type pci_epf_bus_type;
 static const struct device_type pci_epf_type;
 
+/**
+ * pci_epf_type_add_cfs() - Help function drivers to expose function specific
+ *                          attributes in configfs
+ * @epf: the EPF device that has to be configured using configfs
+ * @group: the parent configfs group (corresponding to entries in
+ *         pci_epf_device_id)
+ *
+ * Invoke to expose function specific attributes in configfs. If the function
+ * driver does not have anything to expose (attributes configured by user),
+ * return NULL.
+ */
+struct config_group *pci_epf_type_add_cfs(struct pci_epf *epf,
+					  struct config_group *group)
+{
+	struct config_group *epf_type_group;
+
+	if (!epf->driver) {
+		dev_err(&epf->dev, "epf device not bound to driver\n");
+		return NULL;
+	}
+
+	if (!epf->driver->ops->add_cfs)
+		return NULL;
+
+	mutex_lock(&epf->lock);
+	epf_type_group = epf->driver->ops->add_cfs(epf, group);
+	mutex_unlock(&epf->lock);
+
+	return epf_type_group;
+}
+EXPORT_SYMBOL_GPL(pci_epf_type_add_cfs);
+
 /**
  * pci_epf_unbind() - Notify the function driver that the binding between the
  *		      EPF device and EPC device has been lost
@@ -74,24 +106,37 @@ EXPORT_SYMBOL_GPL(pci_epf_bind);
  * @epf: the EPF device from whom to free the memory
  * @addr: the virtual address of the PCI EPF register space
  * @bar: the BAR number corresponding to the register space
+ * @type: Identifies if the allocated space is for primary EPC or secondary EPC
  *
  * Invoke to free the allocated PCI EPF register space.
  */
-void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar)
+void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar,
+			enum pci_epc_interface_type type)
 {
 	struct device *dev = epf->epc->dev.parent;
+	struct pci_epf_bar *epf_bar;
+	struct pci_epc *epc;
 
 	if (!addr)
 		return;
 
-	dma_free_coherent(dev, epf->bar[bar].size, addr,
-			  epf->bar[bar].phys_addr);
+	if (type == PRIMARY_INTERFACE) {
+		epc = epf->epc;
+		epf_bar = epf->bar;
+	} else {
+		epc = epf->sec_epc;
+		epf_bar = epf->sec_epc_bar;
+	}
 
-	epf->bar[bar].phys_addr = 0;
-	epf->bar[bar].addr = NULL;
-	epf->bar[bar].size = 0;
-	epf->bar[bar].barno = 0;
-	epf->bar[bar].flags = 0;
+	dev = epc->dev.parent;
+	dma_free_coherent(dev, epf_bar[bar].size, addr,
+			  epf_bar[bar].phys_addr);
+
+	epf_bar[bar].phys_addr = 0;
+	epf_bar[bar].addr = NULL;
+	epf_bar[bar].size = 0;
+	epf_bar[bar].barno = 0;
+	epf_bar[bar].flags = 0;
 }
 EXPORT_SYMBOL_GPL(pci_epf_free_space);
 
@@ -101,15 +146,18 @@ EXPORT_SYMBOL_GPL(pci_epf_free_space);
  * @size: the size of the memory that has to be allocated
  * @bar: the BAR number corresponding to the allocated register space
  * @align: alignment size for the allocation region
+ * @type: Identifies if the allocation is for primary EPC or secondary EPC
  *
  * Invoke to allocate memory for the PCI EPF register space.
  */
 void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar,
-			  size_t align)
+			  size_t align, enum pci_epc_interface_type type)
 {
-	void *space;
-	struct device *dev = epf->epc->dev.parent;
+	struct pci_epf_bar *epf_bar;
 	dma_addr_t phys_addr;
+	struct pci_epc *epc;
+	struct device *dev;
+	void *space;
 
 	if (size < 128)
 		size = 128;
@@ -119,17 +167,26 @@ void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar,
 	else
 		size = roundup_pow_of_two(size);
 
+	if (type == PRIMARY_INTERFACE) {
+		epc = epf->epc;
+		epf_bar = epf->bar;
+	} else {
+		epc = epf->sec_epc;
+		epf_bar = epf->sec_epc_bar;
+	}
+
+	dev = epc->dev.parent;
 	space = dma_alloc_coherent(dev, size, &phys_addr, GFP_KERNEL);
 	if (!space) {
 		dev_err(dev, "failed to allocate mem space\n");
 		return NULL;
 	}
 
-	epf->bar[bar].phys_addr = phys_addr;
-	epf->bar[bar].addr = space;
-	epf->bar[bar].size = size;
-	epf->bar[bar].barno = bar;
-	epf->bar[bar].flags |= upper_32_bits(size) ?
+	epf_bar[bar].phys_addr = phys_addr;
+	epf_bar[bar].addr = space;
+	epf_bar[bar].size = size;
+	epf_bar[bar].barno = bar;
+	epf_bar[bar].flags |= upper_32_bits(size) ?
 				PCI_BASE_ADDRESS_MEM_TYPE_64 :
 				PCI_BASE_ADDRESS_MEM_TYPE_32;
 
@@ -282,22 +339,6 @@ struct pci_epf *pci_epf_create(const char *name)
 }
 EXPORT_SYMBOL_GPL(pci_epf_create);
 
-const struct pci_epf_device_id *
-pci_epf_match_device(const struct pci_epf_device_id *id, struct pci_epf *epf)
-{
-	if (!id || !epf)
-		return NULL;
-
-	while (*id->name) {
-		if (strcmp(epf->name, id->name) == 0)
-			return id;
-		id++;
-	}
-
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(pci_epf_match_device);
-
 static void pci_epf_dev_release(struct device *dev)
 {
 	struct pci_epf *epf = to_pci_epf(dev);

drivers/pci/hotplug/acpiphp.h

@@ -176,9 +176,6 @@ int acpiphp_unregister_attention(struct acpiphp_attention_info *info);
 int acpiphp_register_hotplug_slot(struct acpiphp_slot *slot, unsigned int sun);
 void acpiphp_unregister_hotplug_slot(struct acpiphp_slot *slot);
 
-/* acpiphp_glue.c */
-typedef int (*acpiphp_callback)(struct acpiphp_slot *slot, void *data);
-
 int acpiphp_enable_slot(struct acpiphp_slot *slot);
 int acpiphp_disable_slot(struct acpiphp_slot *slot);
 u8 acpiphp_get_power_status(struct acpiphp_slot *slot);

drivers/pci/pci-bridge-emul.c

@@ -21,8 +21,9 @@
 #include "pci-bridge-emul.h"
 
 #define PCI_BRIDGE_CONF_END	PCI_STD_HEADER_SIZEOF
+#define PCI_CAP_PCIE_SIZEOF	(PCI_EXP_SLTSTA2 + 2)
 #define PCI_CAP_PCIE_START	PCI_BRIDGE_CONF_END
-#define PCI_CAP_PCIE_END	(PCI_CAP_PCIE_START + PCI_EXP_SLTSTA2 + 2)
+#define PCI_CAP_PCIE_END	(PCI_CAP_PCIE_START + PCI_CAP_PCIE_SIZEOF)
 
 /**
  * struct pci_bridge_reg_behavior - register bits behaviors
@@ -46,7 +47,8 @@ struct pci_bridge_reg_behavior {
 	u32 w1c;
 };
 
-static const struct pci_bridge_reg_behavior pci_regs_behavior[] = {
+static const
+struct pci_bridge_reg_behavior pci_regs_behavior[PCI_STD_HEADER_SIZEOF / 4] = {
 	[PCI_VENDOR_ID / 4] = { .ro = ~0 },
 	[PCI_COMMAND / 4] = {
 		.rw = (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
@@ -164,7 +166,8 @@ static const struct pci_bridge_reg_behavior pci_regs_behavior[] = {
 	},
 };
 
-static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
+static const
+struct pci_bridge_reg_behavior pcie_cap_regs_behavior[PCI_CAP_PCIE_SIZEOF / 4] = {
 	[PCI_CAP_LIST_ID / 4] = {
 		/*
 		 * Capability ID, Next Capability Pointer and
@@ -260,6 +263,8 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
 int pci_bridge_emul_init(struct pci_bridge_emul *bridge,
 			 unsigned int flags)
 {
+	BUILD_BUG_ON(sizeof(bridge->conf) != PCI_BRIDGE_CONF_END);
+
 	bridge->conf.class_revision |= cpu_to_le32(PCI_CLASS_BRIDGE_PCI << 16);
 	bridge->conf.header_type = PCI_HEADER_TYPE_BRIDGE;
 	bridge->conf.cache_line_size = 0x10;

drivers/pci/pci.c

@@ -4030,6 +4030,10 @@ int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr,
 	ret = logic_pio_register_range(range);
 	if (ret)
 		kfree(range);
+
+	/* Ignore duplicates due to deferred probing */
+	if (ret == -EEXIST)
+		ret = 0;
 #endif
 
 	return ret;

drivers/pci/pcie/Kconfig

@@ -133,14 +133,6 @@ config PCIE_PTM
 	  This is only useful if you have devices that support PTM, but it
 	  is safe to enable even if you don't.
 
-config PCIE_BW
-	bool "PCI Express Bandwidth Change Notification"
-	depends on PCIEPORTBUS
-	help
-	  This enables PCI Express Bandwidth Change Notification.  If
-	  you know link width or rate changes occur only to correct
-	  unreliable links, you may answer Y.
-
 config PCIE_EDR
 	bool "PCI Express Error Disconnect Recover support"
 	depends on PCIE_DPC && ACPI

drivers/pci/pcie/Makefile

@@ -12,5 +12,4 @@ obj-$(CONFIG_PCIEAER_INJECT)	+= aer_inject.o
 obj-$(CONFIG_PCIE_PME)		+= pme.o
 obj-$(CONFIG_PCIE_DPC)		+= dpc.o
 obj-$(CONFIG_PCIE_PTM)		+= ptm.o
-obj-$(CONFIG_PCIE_BW)		+= bw_notification.o
 obj-$(CONFIG_PCIE_EDR)		+= edr.o

drivers/pci/pcie/aer.c

@@ -1388,7 +1388,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 	if (type == PCI_EXP_TYPE_RC_END)
 		root = dev->rcec;
 	else
-		root = dev;
+		root = pcie_find_root_port(dev);
 
 	/*
 	 * If the platform retained control of AER, an RCiEP may not have
@@ -1414,7 +1414,8 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 		}
 	} else {
 		rc = pci_bus_error_reset(dev);
-		pci_info(dev, "Root Port link has been reset (%d)\n", rc);
+		pci_info(dev, "%s Port link has been reset (%d)\n",
+			pci_is_root_bus(dev->bus) ? "Root" : "Downstream", rc);
 	}
 
 	if ((host->native_aer || pcie_ports_native) && aer) {

drivers/pci/pcie/bw_notification.c

-// SPDX-License-Identifier: GPL-2.0+
-/*
- * PCI Express Link Bandwidth Notification services driver
- * Author: Alexandru Gagniuc <mr.nuke.me@gmail.com>
- *
- * Copyright (C) 2019, Dell Inc
- *
- * The PCIe Link Bandwidth Notification provides a way to notify the
- * operating system when the link width or data rate changes.  This
- * capability is required for all root ports and downstream ports
- * supporting links wider than x1 and/or multiple link speeds.
- *
- * This service port driver hooks into the bandwidth notification interrupt
- * and warns when links become degraded in operation.
- */
-
-#define dev_fmt(fmt) "bw_notification: " fmt
-
-#include "../pci.h"
-#include "portdrv.h"
-
-static bool pcie_link_bandwidth_notification_supported(struct pci_dev *dev)
-{
-	int ret;
-	u32 lnk_cap;
-
-	ret = pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnk_cap);
-	return (ret == PCIBIOS_SUCCESSFUL) && (lnk_cap & PCI_EXP_LNKCAP_LBNC);
-}
-
-static void pcie_enable_link_bandwidth_notification(struct pci_dev *dev)
-{
-	u16 lnk_ctl;
-
-	pcie_capability_write_word(dev, PCI_EXP_LNKSTA, PCI_EXP_LNKSTA_LBMS);
-
-	pcie_capability_read_word(dev, PCI_EXP_LNKCTL, &lnk_ctl);
-	lnk_ctl |= PCI_EXP_LNKCTL_LBMIE;
-	pcie_capability_write_word(dev, PCI_EXP_LNKCTL, lnk_ctl);
-}
-
-static void pcie_disable_link_bandwidth_notification(struct pci_dev *dev)
-{
-	u16 lnk_ctl;
-
-	pcie_capability_read_word(dev, PCI_EXP_LNKCTL, &lnk_ctl);
-	lnk_ctl &= ~PCI_EXP_LNKCTL_LBMIE;
-	pcie_capability_write_word(dev, PCI_EXP_LNKCTL, lnk_ctl);
-}
-
-static irqreturn_t pcie_bw_notification_irq(int irq, void *context)
-{
-	struct pcie_device *srv = context;
-	struct pci_dev *port = srv->port;
-	u16 link_status, events;
-	int ret;
-
-	ret = pcie_capability_read_word(port, PCI_EXP_LNKSTA, &link_status);
-	events = link_status & PCI_EXP_LNKSTA_LBMS;
-
-	if (ret != PCIBIOS_SUCCESSFUL || !events)
-		return IRQ_NONE;
-
-	pcie_capability_write_word(port, PCI_EXP_LNKSTA, events);
-	pcie_update_link_speed(port->subordinate, link_status);
-	return IRQ_WAKE_THREAD;
-}
-
-static irqreturn_t pcie_bw_notification_handler(int irq, void *context)
-{
-	struct pcie_device *srv = context;
-	struct pci_dev *port = srv->port;
-	struct pci_dev *dev;
-
-	/*
-	 * Print status from downstream devices, not this root port or
-	 * downstream switch port.
-	 */
-	down_read(&pci_bus_sem);
-	list_for_each_entry(dev, &port->subordinate->devices, bus_list)
-		pcie_report_downtraining(dev);
-	up_read(&pci_bus_sem);
-
-	return IRQ_HANDLED;
-}
-
-static int pcie_bandwidth_notification_probe(struct pcie_device *srv)
-{
-	int ret;
-
-	/* Single-width or single-speed ports do not have to support this. */
-	if (!pcie_link_bandwidth_notification_supported(srv->port))
-		return -ENODEV;
-
-	ret = request_threaded_irq(srv->irq, pcie_bw_notification_irq,
-				   pcie_bw_notification_handler,
-				   IRQF_SHARED, "PCIe BW notif", srv);
-	if (ret)
-		return ret;
-
-	pcie_enable_link_bandwidth_notification(srv->port);
-	pci_info(srv->port, "enabled with IRQ %d\n", srv->irq);
-
-	return 0;
-}
-
-static void pcie_bandwidth_notification_remove(struct pcie_device *srv)
-{
-	pcie_disable_link_bandwidth_notification(srv->port);
-	free_irq(srv->irq, srv);
-}
-
-static int pcie_bandwidth_notification_suspend(struct pcie_device *srv)
-{
-	pcie_disable_link_bandwidth_notification(srv->port);
-	return 0;
-}
-
-static int pcie_bandwidth_notification_resume(struct pcie_device *srv)
-{
-	pcie_enable_link_bandwidth_notification(srv->port);
-	return 0;
-}
-
-static struct pcie_port_service_driver pcie_bandwidth_notification_driver = {
-	.name		= "pcie_bw_notification",
-	.port_type	= PCIE_ANY_PORT,
-	.service	= PCIE_PORT_SERVICE_BWNOTIF,
-	.probe		= pcie_bandwidth_notification_probe,
-	.suspend	= pcie_bandwidth_notification_suspend,
-	.resume		= pcie_bandwidth_notification_resume,
-	.remove		= pcie_bandwidth_notification_remove,
-};
-
-int __init pcie_bandwidth_notification_init(void)
-{
-	return pcie_port_service_register(&pcie_bandwidth_notification_driver);
-}

drivers/pci/pcie/err.c

@@ -198,8 +198,7 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
 	pci_dbg(bridge, "broadcast error_detected message\n");
 	if (state == pci_channel_io_frozen) {
 		pci_walk_bridge(bridge, report_frozen_detected, &status);
-		status = reset_subordinates(bridge);
-		if (status != PCI_ERS_RESULT_RECOVERED) {
+		if (reset_subordinates(bridge) != PCI_ERS_RESULT_RECOVERED) {
 			pci_warn(bridge, "subordinate device reset failed\n");
 			goto failed;
 		}
@@ -231,15 +230,14 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
 	pci_walk_bridge(bridge, report_resume, &status);
 
 	/*
-	 * If we have native control of AER, clear error status in the Root
-	 * Port or Downstream Port that signaled the error.  If the
-	 * platform retained control of AER, it is responsible for clearing
-	 * this status.  In that case, the signaling device may not even be
-	 * visible to the OS.
+	 * If we have native control of AER, clear error status in the device
+	 * that detected the error.  If the platform retained control of AER,
+	 * it is responsible for clearing this status.  In that case, the
+	 * signaling device may not even be visible to the OS.
 	 */
 	if (host->native_aer || pcie_ports_native) {
-		pcie_clear_device_status(bridge);
-		pci_aer_clear_nonfatal_status(bridge);
+		pcie_clear_device_status(dev);
+		pci_aer_clear_nonfatal_status(dev);
 	}
 	pci_info(bridge, "device recovery successful\n");
 	return status;

include/linux/acpi.h

@@ -591,9 +591,6 @@ extern u32 osc_sb_native_usb4_control;
 #define ACPI_GSB_ACCESS_ATTRIB_RAW_BYTES	0x0000000E
 #define ACPI_GSB_ACCESS_ATTRIB_RAW_PROCESS	0x0000000F
 
-extern acpi_status acpi_pci_osc_control_set(acpi_handle handle,
-					     u32 *mask, u32 req);
-
 /* Enable _OST when all relevant hotplug operations are enabled */
 #if defined(CONFIG_ACPI_HOTPLUG_CPU) &&			\
 	defined(CONFIG_ACPI_HOTPLUG_MEMORY) &&		\