Commit 60d06079 authored by Lukas Bulwahn's avatar Lukas Bulwahn Committed by Miquel Raynal

mtd: maps: remove dead MTD map driver for PMC-Sierra MSP boards

Commit 1b00767f ("MIPS: Remove PMC MSP71xx platform") removes the
config PMC_MSP in ./arch/mips/Kconfig.

Hence, since then, the corresponding MTD map driver for PMC-Sierra MSP
boards is dead code. Remove this dead driver.
Signed-off-by: default avatarLukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: default avatarMiquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210817104531.12675-1-lukas.bulwahn@gmail.com
parent fa451399
...@@ -127,29 +127,6 @@ config MTD_PHYSMAP_GPIO_ADDR ...@@ -127,29 +127,6 @@ config MTD_PHYSMAP_GPIO_ADDR
Extend the physmap driver to allow flashes to be partially Extend the physmap driver to allow flashes to be partially
physically addressed and assisted by GPIOs. physically addressed and assisted by GPIOs.
config MTD_PMC_MSP_EVM
tristate "CFI Flash device mapped on PMC-Sierra MSP"
depends on PMC_MSP && MTD_CFI
help
This provides a 'mapping' driver which supports the way
in which user-programmable flash chips are connected on the
PMC-Sierra MSP eval/demo boards.
choice
prompt "Maximum mappable memory available for flash IO"
depends on MTD_PMC_MSP_EVM
default MSP_FLASH_MAP_LIMIT_32M
config MSP_FLASH_MAP_LIMIT_32M
bool "32M"
endchoice
config MSP_FLASH_MAP_LIMIT
hex
default "0x02000000"
depends on MSP_FLASH_MAP_LIMIT_32M
config MTD_SUN_UFLASH config MTD_SUN_UFLASH
tristate "Sun Microsystems userflash support" tristate "Sun Microsystems userflash support"
depends on SPARC && MTD_CFI && PCI depends on SPARC && MTD_CFI && PCI
......
...@@ -25,7 +25,6 @@ physmap-objs-$(CONFIG_MTD_PHYSMAP_IXP4XX) += physmap-ixp4xx.o ...@@ -25,7 +25,6 @@ physmap-objs-$(CONFIG_MTD_PHYSMAP_IXP4XX) += physmap-ixp4xx.o
physmap-objs := $(physmap-objs-y) physmap-objs := $(physmap-objs-y)
obj-$(CONFIG_MTD_PHYSMAP) += physmap.o obj-$(CONFIG_MTD_PHYSMAP) += physmap.o
obj-$(CONFIG_MTD_PISMO) += pismo.o obj-$(CONFIG_MTD_PISMO) += pismo.o
obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o
obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o
......
/*
* Mapping of a custom board with both AMD CFI and JEDEC flash in partitions.
* Config with both CFI and JEDEC device support.
*
* Basically physmap.c with the addition of partitions and
* an array of mapping info to accommodate more than one flash type per board.
*
* Copyright 2005-2007 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <msp_prom.h>
#include <msp_regs.h>
static struct mtd_info **msp_flash;
static struct mtd_partition **msp_parts;
static struct map_info *msp_maps;
static int fcnt;
#define DEBUG_MARKER printk(KERN_NOTICE "%s[%d]\n", __func__, __LINE__)
static int __init init_msp_flash(void)
{
int i, j, ret = -ENOMEM;
int offset, coff;
char *env;
int pcnt;
char flash_name[] = "flash0";
char part_name[] = "flash0_0";
unsigned addr, size;
/* If ELB is disabled by "ful-mux" mode, we can't get at flash */
if ((*DEV_ID_REG & DEV_ID_SINGLE_PC) &&
(*ELB_1PC_EN_REG & SINGLE_PCCARD)) {
printk(KERN_NOTICE "Single PC Card mode: no flash access\n");
return -ENXIO;
}
/* examine the prom environment for flash devices */
for (fcnt = 0; (env = prom_getenv(flash_name)); fcnt++)
flash_name[5] = '0' + fcnt + 1;
if (fcnt < 1)
return -ENXIO;
printk(KERN_NOTICE "Found %d PMC flash devices\n", fcnt);
msp_flash = kcalloc(fcnt, sizeof(*msp_flash), GFP_KERNEL);
if (!msp_flash)
return -ENOMEM;
msp_parts = kcalloc(fcnt, sizeof(*msp_parts), GFP_KERNEL);
if (!msp_parts)
goto free_msp_flash;
msp_maps = kcalloc(fcnt, sizeof(*msp_maps), GFP_KERNEL);
if (!msp_maps)
goto free_msp_parts;
/* loop over the flash devices, initializing each */
for (i = 0; i < fcnt; i++) {
/* examine the prom environment for flash partititions */
part_name[5] = '0' + i;
part_name[7] = '0';
for (pcnt = 0; (env = prom_getenv(part_name)); pcnt++)
part_name[7] = '0' + pcnt + 1;
if (pcnt == 0) {
printk(KERN_NOTICE "Skipping flash device %d "
"(no partitions defined)\n", i);
continue;
}
msp_parts[i] = kcalloc(pcnt, sizeof(struct mtd_partition),
GFP_KERNEL);
if (!msp_parts[i])
goto cleanup_loop;
/* now initialize the devices proper */
flash_name[5] = '0' + i;
env = prom_getenv(flash_name);
if (sscanf(env, "%x:%x", &addr, &size) < 2) {
ret = -ENXIO;
kfree(msp_parts[i]);
goto cleanup_loop;
}
addr = CPHYSADDR(addr);
printk(KERN_NOTICE
"MSP flash device \"%s\": 0x%08x at 0x%08x\n",
flash_name, size, addr);
/* This must matchs the actual size of the flash chip */
msp_maps[i].size = size;
msp_maps[i].phys = addr;
/*
* Platforms have a specific limit of the size of memory
* which may be mapped for flash:
*/
if (size > CONFIG_MSP_FLASH_MAP_LIMIT)
size = CONFIG_MSP_FLASH_MAP_LIMIT;
msp_maps[i].virt = ioremap(addr, size);
if (msp_maps[i].virt == NULL) {
ret = -ENXIO;
kfree(msp_parts[i]);
goto cleanup_loop;
}
msp_maps[i].bankwidth = 1;
msp_maps[i].name = kstrndup(flash_name, 7, GFP_KERNEL);
if (!msp_maps[i].name) {
iounmap(msp_maps[i].virt);
kfree(msp_parts[i]);
goto cleanup_loop;
}
for (j = 0; j < pcnt; j++) {
part_name[5] = '0' + i;
part_name[7] = '0' + j;
env = prom_getenv(part_name);
if (sscanf(env, "%x:%x:%n", &offset, &size,
&coff) < 2) {
ret = -ENXIO;
kfree(msp_maps[i].name);
iounmap(msp_maps[i].virt);
kfree(msp_parts[i]);
goto cleanup_loop;
}
msp_parts[i][j].size = size;
msp_parts[i][j].offset = offset;
msp_parts[i][j].name = env + coff;
}
/* now probe and add the device */
simple_map_init(&msp_maps[i]);
msp_flash[i] = do_map_probe("cfi_probe", &msp_maps[i]);
if (msp_flash[i]) {
msp_flash[i]->owner = THIS_MODULE;
mtd_device_register(msp_flash[i], msp_parts[i], pcnt);
} else {
printk(KERN_ERR "map probe failed for flash\n");
ret = -ENXIO;
kfree(msp_maps[i].name);
iounmap(msp_maps[i].virt);
kfree(msp_parts[i]);
goto cleanup_loop;
}
}
return 0;
cleanup_loop:
while (i--) {
mtd_device_unregister(msp_flash[i]);
map_destroy(msp_flash[i]);
kfree(msp_maps[i].name);
iounmap(msp_maps[i].virt);
kfree(msp_parts[i]);
}
kfree(msp_maps);
free_msp_parts:
kfree(msp_parts);
free_msp_flash:
kfree(msp_flash);
return ret;
}
static void __exit cleanup_msp_flash(void)
{
int i;
for (i = 0; i < fcnt; i++) {
mtd_device_unregister(msp_flash[i]);
map_destroy(msp_flash[i]);
iounmap((void *)msp_maps[i].virt);
/* free the memory */
kfree(msp_maps[i].name);
kfree(msp_parts[i]);
}
kfree(msp_flash);
kfree(msp_parts);
kfree(msp_maps);
}
MODULE_AUTHOR("PMC-Sierra, Inc");
MODULE_DESCRIPTION("MTD map driver for PMC-Sierra MSP boards");
MODULE_LICENSE("GPL");
module_init(init_msp_flash);
module_exit(cleanup_msp_flash);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment