regulator: bd718x7: Use dev_err_probe()

The dev_err_probe() has (at least) following benefits over dev_err()
when printing an error print for a failed function call at a device
driver probe:
        - Omit error level print if error is 'EPRBE_DEFER'
        - Standardized print format for returned error
        - return the error value allowing shortening calls like:

        if (ret) {
                dev_err(...);
                return ret;
        }

        to

        if (ret)
                return dev_err_probe(...);

Convert the ROHM BD718x7 regulator driver to use the dev_err_probe() when
returned error is not hard-coded constant.

NOTE:
This commit also changes the error handling path to return immediately
from a spot where the error is spotted instead of using a single point
of exit.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/fee54c2d04bb41b51381e31523f9ed31575206d2.1669203610.git.mazziesaccount@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/regulator/bd718x7-regulator.c

@@ -1706,20 +1706,17 @@ static int bd718xx_probe(struct platform_device *pdev)
 		break;
 	default:
 		dev_err(&pdev->dev, "Unsupported chip type\n");
-		err = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	/* Register LOCK release */
 	err = regmap_update_bits(regmap, BD718XX_REG_REGLOCK,
 				 (REGLOCK_PWRSEQ | REGLOCK_VREG), 0);
-	if (err) {
-		dev_err(&pdev->dev, "Failed to unlock PMIC (%d)\n", err);
-		goto err;
-	} else {
-		dev_dbg(&pdev->dev, "Unlocked lock register 0x%x\n",
-			BD718XX_REG_REGLOCK);
-	}
+	if (err)
+		return dev_err_probe(&pdev->dev, err, "Failed to unlock PMIC\n");
+
+	dev_dbg(&pdev->dev, "Unlocked lock register 0x%x\n",
+		BD718XX_REG_REGLOCK);
 
 	use_snvs = of_property_read_bool(pdev->dev.parent->of_node,
 					 "rohm,reset-snvs-powered");
@@ -1736,13 +1733,11 @@ static int bd718xx_probe(struct platform_device *pdev)
 					 BD718XX_WDOG_POWEROFF_MASK |
 					 BD718XX_KEY_L_POWEROFF_MASK,
 					 BD718XX_POWOFF_TO_RDY);
-		if (err) {
-			dev_err(&pdev->dev, "Failed to change reset target\n");
-			goto err;
-		} else {
-			dev_dbg(&pdev->dev,
-				"Changed all resets from SVNS to READY\n");
-		}
+		if (err)
+			return dev_err_probe(&pdev->dev, err,
+					     "Failed to change reset target\n");
+
+		dev_dbg(&pdev->dev, "Changed all resets from SVNS to READY\n");
 	}
 
 	config.dev = pdev->dev.parent;
@@ -1778,13 +1773,10 @@ static int bd718xx_probe(struct platform_device *pdev)
 			desc->ops = swops[i];
 
 		rdev = devm_regulator_register(&pdev->dev, desc, &config);
-		if (IS_ERR(rdev)) {
-			dev_err(&pdev->dev,
-				"failed to register %s regulator\n",
-				desc->name);
-			err = PTR_ERR(rdev);
-			goto err;
-		}
+		if (IS_ERR(rdev))
+			return dev_err_probe(&pdev->dev, PTR_ERR(rdev),
+					     "failed to register %s regulator\n",
+					     desc->name);
 
 		/*
 		 * Regulator register gets the regulator constraints and
@@ -1807,28 +1799,23 @@ static int bd718xx_probe(struct platform_device *pdev)
 		    !rdev->constraints->boot_on)) {
 			err = regmap_update_bits(regmap, r->init.reg,
 						 r->init.mask, r->init.val);
-			if (err) {
-				dev_err(&pdev->dev,
+			if (err)
+				return dev_err_probe(&pdev->dev, err,
 					"Failed to take control for (%s)\n",
 					desc->name);
-				goto err;
-			}
 		}
 		for (j = 0; j < r->additional_init_amnt; j++) {
 			err = regmap_update_bits(regmap,
 						 r->additional_inits[j].reg,
 						 r->additional_inits[j].mask,
 						 r->additional_inits[j].val);
-			if (err) {
-				dev_err(&pdev->dev,
+			if (err)
+				return dev_err_probe(&pdev->dev, err,
 					"Buck (%s) initialization failed\n",
 					desc->name);
-				goto err;
-			}
 		}
 	}
 
-err:
 	return err;
 }