Skip to content

L
linux
Commit 6f130478 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (55 commits)
  regulator: Voltage count for AB3100
  mfd: Convert WM8350 to use request_threaded_irq()
  mfd: Update MAINTAINERS patterns for WM831x
  mfd: Fix twl4030-power warnings
  regulator: AB3100 support
  rtc: AB3100 RTC support
  mfd: Fix ab3100-otp build failure
  mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board
  mfd: Print warning for twl4030 out-of-order script loading
  mfd: Add support for TWL4030/5030 dynamic power switching
  mfd: AB3100 OTP readout
  regulator: Add Freescale MC13783 driver
  mfd: Add Freescale MC13783 driver
  mfd: AB3100 disable irq nosync
  mfd: AB3100 alter default setting
  mfd: AB3100 propagate error
  mfd: AB3100 accessor function cleanups
  rtc: Add support for RTCs on Wolfson WM831x devices
  regulator: get pcap data from the parent device
  input: PCAP2 misc input driver
  ...
parents 6f128fa3 75f2ba8f
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 12770 additions and 119 deletions
Documentation/hwmon/wm831x 0 → 100644
View file @ 6f130478
Kernel driver wm831x-hwmon
==========================
Supported chips:
* Wolfson Microelectronics WM831x PMICs
Prefix: 'wm831x'
Datasheet:
http://www.wolfsonmicro.com/products/WM8310
http://www.wolfsonmicro.com/products/WM8311
http://www.wolfsonmicro.com/products/WM8312
Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
Description
-----------
The WM831x series of PMICs include an AUXADC which can be used to
monitor a range of system operating parameters, including the voltages
of the major supplies within the system. Currently the driver provides
reporting of all the input values but does not provide any alarms.
Voltage Monitoring
------------------
Voltages are sampled by a 12 bit ADC. Voltages in milivolts are 1.465
times the ADC value.
Temperature Monitoring
----------------------
Temperatures are sampled by a 12 bit ADC. Chip and battery temperatures
are available. The chip temperature is calculated as:
Degrees celsius = (512.18 - data) / 1.0983
while the battery temperature calculation will depend on the NTC
thermistor component.
Documentation/hwmon/wm8350 0 → 100644
View file @ 6f130478
Kernel driver wm8350-hwmon
==========================
Supported chips:
* Wolfson Microelectronics WM835x PMICs
Prefix: 'wm8350'
Datasheet:
http://www.wolfsonmicro.com/products/WM8350
http://www.wolfsonmicro.com/products/WM8351
http://www.wolfsonmicro.com/products/WM8352
Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
Description
-----------
The WM835x series of PMICs include an AUXADC which can be used to
monitor a range of system operating parameters, including the voltages
of the major supplies within the system. Currently the driver provides
simple access to these major supplies.
Voltage Monitoring
------------------
Voltages are sampled by a 12 bit ADC. For the internal supplies the ADC
is referenced to the system VRTC.
MAINTAINERS
View file @ 6f130478
......@@ -5683,6 +5683,26 @@ S: Supported
F: drivers/input/touchscreen/*wm97*
F: include/linux/wm97xx.h
WOLFSON MICROELECTRONICS PMIC DRIVERS
P: Mark Brown
M: broonie@opensource.wolfsonmicro.com
L: linux-kernel@vger.kernel.org
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
W: http://opensource.wolfsonmicro.com/node/8
S: Supported
F: drivers/leds/leds-wm83*.c
F: drivers/mfd/wm8*.c
F: drivers/power/wm83*.c
F: drivers/rtc/rtc-wm83*.c
F: drivers/regulator/wm8*.c
F: drivers/video/backlight/wm83*_bl.c
F: drivers/watchdog/wm83*_wdt.c
F: include/linux/mfd/wm831x/
F: include/linux/mfd/wm8350/
F: include/linux/mfd/wm8400/
F: sound/soc/codecs/wm8350.c
F: sound/soc/codecs/wm8400.c
X.25 NETWORK LAYER
M: Henner Eisen <eis@baty.hanse.de>
L: linux-x25@vger.kernel.org
......
arch/arm/mach-omap2/board-rx51-peripherals.c
View file @ 6f130478
/*
* linux/arch/arm/mach-omap2/board-rx51-flash.c
* linux/arch/arm/mach-omap2/board-rx51-peripherals.c
*
* Copyright (C) 2008-2009 Nokia
*
......@@ -282,7 +282,124 @@ static struct twl4030_usb_data rx51_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_platform_data rx51_twldata = {
static struct twl4030_ins sleep_on_seq[] __initdata = {
/*
* Turn off VDD1 and VDD2.
*/
{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4},
{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2},
/*
* And also turn off the OMAP3 PLLs and the sysclk output.
*/
{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3},
{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_OFF), 3},
};
static struct twl4030_script sleep_on_script __initdata = {
.script = sleep_on_seq,
.size = ARRAY_SIZE(sleep_on_seq),
.flags = TWL4030_SLEEP_SCRIPT,
};
static struct twl4030_ins wakeup_seq[] __initdata = {
/*
* Reenable the OMAP3 PLLs.
* Wakeup VDD1 and VDD2.
* Reenable sysclk output.
*/
{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30},
{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30},
{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37},
{MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3},
};
static struct twl4030_script wakeup_script __initdata = {
.script = wakeup_seq,
.size = ARRAY_SIZE(wakeup_seq),
.flags = TWL4030_WAKEUP12_SCRIPT,
};
static struct twl4030_ins wakeup_p3_seq[] __initdata = {
/*
* Wakeup VDD1 (dummy to be able to insert a delay)
* Enable CLKEN
*/
{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_ACTIVE), 3},
};
static struct twl4030_script wakeup_p3_script __initdata = {
.script = wakeup_p3_seq,
.size = ARRAY_SIZE(wakeup_p3_seq),
.flags = TWL4030_WAKEUP3_SCRIPT,
};
static struct twl4030_ins wrst_seq[] __initdata = {
/*
* Reset twl4030.
* Reset VDD1 regulator.
* Reset VDD2 regulator.
* Reset VPLL1 regulator.
* Enable sysclk output.
* Reenable twl4030.
*/
{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
0x13},
{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 2, RES_STATE_WRST), 0x13},
{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
{MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
{MSG_SINGULAR(DEV_GRP_P1, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
};
static struct twl4030_script wrst_script __initdata = {
.script = wrst_seq,
.size = ARRAY_SIZE(wrst_seq),
.flags = TWL4030_WRST_SCRIPT,
};
static struct twl4030_script *twl4030_scripts[] __initdata = {
/* wakeup12 script should be loaded before sleep script, otherwise a
board might hit retention before loading of wakeup script is
completed. This can cause boot failures depending on timing issues.
*/
&wakeup_script,
&sleep_on_script,
&wakeup_p3_script,
&wrst_script,
};
static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
{ .resource = RES_VINTANA1, .devgroup = -1, .type = -1, .type2 = 1 },
{ .resource = RES_VINTANA2, .devgroup = -1, .type = -1, .type2 = 1 },
{ .resource = RES_VINTDIG, .devgroup = -1, .type = -1, .type2 = 1 },
{ .resource = RES_VMMC1, .devgroup = -1, .type = -1, .type2 = 3},
{ .resource = RES_VMMC2, .devgroup = DEV_GRP_NULL, .type = -1,
.type2 = 3},
{ .resource = RES_VAUX1, .devgroup = -1, .type = -1, .type2 = 3},
{ .resource = RES_VAUX2, .devgroup = -1, .type = -1, .type2 = 3},
{ .resource = RES_VAUX3, .devgroup = -1, .type = -1, .type2 = 3},
{ .resource = RES_VAUX4, .devgroup = -1, .type = -1, .type2 = 3},
{ .resource = RES_VPLL2, .devgroup = -1, .type = -1, .type2 = 3},
{ .resource = RES_VDAC, .devgroup = -1, .type = -1, .type2 = 3},
{ .resource = RES_VSIM, .devgroup = DEV_GRP_NULL, .type = -1,
.type2 = 3},
{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P3, .type = -1,
.type2 = 1 },
{ 0, 0},
};
static struct twl4030_power_data rx51_t2scripts_data __initdata = {
.scripts = twl4030_scripts,
.num = ARRAY_SIZE(twl4030_scripts),
.resource_config = twl4030_rconfig,
};
static struct twl4030_platform_data rx51_twldata __initdata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
......@@ -291,6 +408,7 @@ static struct twl4030_platform_data rx51_twldata = {
.keypad = &rx51_kp_data,
.madc = &rx51_madc_data,
.usb = &rx51_usb_data,
.power = &rx51_t2scripts_data,
.vaux1 = &rx51_vaux1,
.vaux2 = &rx51_vaux2,
......
drivers/gpio/Kconfig
View file @ 6f130478
......@@ -155,6 +155,13 @@ config GPIO_TWL4030
Say yes here to access the GPIO signals of various multi-function
power management chips from Texas Instruments.
config GPIO_WM831X
tristate "WM831x GPIOs"
depends on MFD_WM831X
help
Say yes here to access the GPIO signals of WM831x power management
chips from Wolfson Microelectronics.
comment "PCI GPIO expanders:"
config GPIO_BT8XX
......
drivers/gpio/Makefile
View file @ 6f130478
......@@ -14,3 +14,4 @@ obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o
drivers/gpio/wm831x-gpio.c 0 → 100644
View file @ 6f130478
/*
* wm831x-gpio.c -- gpiolib support for Wolfson WM831x PMICs
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/mfd/core.h>
#include <linux/platform_device.h>
#include <linux/seq_file.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#include <linux/mfd/wm831x/gpio.h>
#define WM831X_GPIO_MAX 16
struct wm831x_gpio {
struct wm831x *wm831x;
struct gpio_chip gpio_chip;
};
static inline struct wm831x_gpio *to_wm831x_gpio(struct gpio_chip *chip)
{
return container_of(chip, struct wm831x_gpio, gpio_chip);
}
static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
{
struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
struct wm831x *wm831x = wm831x_gpio->wm831x;
return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
WM831X_GPN_DIR | WM831X_GPN_TRI,
WM831X_GPN_DIR);
}
static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
struct wm831x *wm831x = wm831x_gpio->wm831x;
int ret;
ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
if (ret < 0)
return ret;
if (ret & 1 << offset)
return 1;
else
return 0;
}
static int wm831x_gpio_direction_out(struct gpio_chip *chip,
unsigned offset, int value)
{
struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
struct wm831x *wm831x = wm831x_gpio->wm831x;
return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
WM831X_GPN_DIR | WM831X_GPN_TRI, 0);
}
static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
struct wm831x *wm831x = wm831x_gpio->wm831x;
wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset,
value << offset);
}
#ifdef CONFIG_DEBUG_FS
static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
struct wm831x *wm831x = wm831x_gpio->wm831x;
int i;
for (i = 0; i < chip->ngpio; i++) {
int gpio = i + chip->base;
int reg;
const char *label, *pull, *powerdomain;
/* We report the GPIO even if it's not requested since
* we're also reporting things like alternate
* functions which apply even when the GPIO is not in
* use as a GPIO.
*/
label = gpiochip_is_requested(chip, i);
if (!label)
label = "Unrequested";
seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label);
reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i);
if (reg < 0) {
dev_err(wm831x->dev,
"GPIO control %d read failed: %d\n",
gpio, reg);
seq_printf(s, "\n");
continue;
}
switch (reg & WM831X_GPN_PULL_MASK) {
case WM831X_GPIO_PULL_NONE:
pull = "nopull";
break;
case WM831X_GPIO_PULL_DOWN:
pull = "pulldown";
break;
case WM831X_GPIO_PULL_UP:
pull = "pullup";
default:
pull = "INVALID PULL";
break;
}
switch (i + 1) {
case 1 ... 3:
case 7 ... 9:
if (reg & WM831X_GPN_PWR_DOM)
powerdomain = "VPMIC";
else
powerdomain = "DBVDD";
break;
case 4 ... 6:
case 10 ... 12:
if (reg & WM831X_GPN_PWR_DOM)
powerdomain = "SYSVDD";
else
powerdomain = "DBVDD";
break;
case 13 ... 16:
powerdomain = "TPVDD";
break;
default:
BUG();
break;
}
seq_printf(s, " %s %s %s %s%s\n"
" %s%s (0x%4x)\n",
reg & WM831X_GPN_DIR ? "in" : "out",
wm831x_gpio_get(chip, i) ? "high" : "low",
pull,
powerdomain,
reg & WM831X_GPN_POL ? " inverted" : "",
reg & WM831X_GPN_OD ? "open-drain" : "CMOS",
reg & WM831X_GPN_TRI ? " tristated" : "",
reg);
}
}
#else
#define wm831x_gpio_dbg_show NULL
#endif
static struct gpio_chip template_chip = {
.label = "wm831x",
.owner = THIS_MODULE,
.direction_input = wm831x_gpio_direction_in,
.get = wm831x_gpio_get,
.direction_output = wm831x_gpio_direction_out,
.set = wm831x_gpio_set,
.dbg_show = wm831x_gpio_dbg_show,
.can_sleep = 1,
};
static int __devinit wm831x_gpio_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
struct wm831x_gpio *wm831x_gpio;
int ret;
wm831x_gpio = kzalloc(sizeof(*wm831x_gpio), GFP_KERNEL);
if (wm831x_gpio == NULL)
return -ENOMEM;
wm831x_gpio->wm831x = wm831x;
wm831x_gpio->gpio_chip = template_chip;
wm831x_gpio->gpio_chip.ngpio = WM831X_GPIO_MAX;
wm831x_gpio->gpio_chip.dev = &pdev->dev;
if (pdata && pdata->gpio_base)
wm831x_gpio->gpio_chip.base = pdata->gpio_base;
else
wm831x_gpio->gpio_chip.base = -1;
ret = gpiochip_add(&wm831x_gpio->gpio_chip);
if (ret < 0) {
dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
ret);
goto err;
}
platform_set_drvdata(pdev, wm831x_gpio);
return ret;
err:
kfree(wm831x_gpio);
return ret;
}
static int __devexit wm831x_gpio_remove(struct platform_device *pdev)
{
struct wm831x_gpio *wm831x_gpio = platform_get_drvdata(pdev);
int ret;
ret = gpiochip_remove(&wm831x_gpio->gpio_chip);
if (ret == 0)
kfree(wm831x_gpio);
return ret;
}
static struct platform_driver wm831x_gpio_driver = {
.driver.name = "wm831x-gpio",
.driver.owner = THIS_MODULE,
.probe = wm831x_gpio_probe,
.remove = __devexit_p(wm831x_gpio_remove),
};
static int __init wm831x_gpio_init(void)
{
return platform_driver_register(&wm831x_gpio_driver);
}
subsys_initcall(wm831x_gpio_init);
static void __exit wm831x_gpio_exit(void)
{
platform_driver_unregister(&wm831x_gpio_driver);
}
module_exit(wm831x_gpio_exit);
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("GPIO interface for WM831x PMICs");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm831x-gpio");
drivers/hwmon/Kconfig
View file @ 6f130478
......@@ -946,6 +946,27 @@ config SENSORS_W83627EHF
This driver can also be built as a module. If so, the module
will be called w83627ehf.
config SENSORS_WM831X
tristate "WM831x PMICs"
depends on MFD_WM831X
help
If you say yes here you get support for the hardware
monitoring functionality of the Wolfson Microelectronics
WM831x series of PMICs.
This driver can also be built as a module. If so, the module
will be called wm831x-hwmon.
config SENSORS_WM8350
tristate "Wolfson Microelectronics WM835x"
depends on MFD_WM8350
help
If you say yes here you get support for the hardware
monitoring features of the WM835x series of PMICs.
This driver can also be built as a module. If so, the module
will be called wm8350-hwmon.
config SENSORS_ULTRA45
tristate "Sun Ultra45 PIC16F747"
depends on SPARC64
......
drivers/hwmon/Makefile
View file @ 6f130478
......@@ -93,6 +93,8 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
......
drivers/hwmon/wm831x-hwmon.c 0 → 100644
View file @ 6f130478
/*
* drivers/hwmon/wm831x-hwmon.c - Wolfson Microelectronics WM831x PMIC
* hardware monitoring features.
*
* Copyright (C) 2009 Wolfson Microelectronics plc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License v2 as published by the
* Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/auxadc.h>
struct wm831x_hwmon {
struct wm831x *wm831x;
struct device *classdev;
};
static ssize_t show_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "wm831x\n");
}
static const char *input_names[] = {
[WM831X_AUX_SYSVDD] = "SYSVDD",
[WM831X_AUX_USB] = "USB",
[WM831X_AUX_BKUP_BATT] = "Backup battery",
[WM831X_AUX_BATT] = "Battery",
[WM831X_AUX_WALL] = "WALL",
[WM831X_AUX_CHIP_TEMP] = "PMIC",
[WM831X_AUX_BATT_TEMP] = "Battery",
};
static ssize_t show_voltage(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
int channel = to_sensor_dev_attr(attr)->index;
int ret;
ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000));
}
static ssize_t show_chip_temp(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
int channel = to_sensor_dev_attr(attr)->index;
int ret;
ret = wm831x_auxadc_read(hwmon->wm831x, channel);
if (ret < 0)
return ret;
/* Degrees celsius = (512.18-ret) / 1.0983 */
ret = 512180 - (ret * 1000);
ret = DIV_ROUND_CLOSEST(ret * 10000, 10983);
return sprintf(buf, "%d\n", ret);
}
static ssize_t show_label(struct device *dev,
struct device_attribute *attr, char *buf)
{
int channel = to_sensor_dev_attr(attr)->index;
return sprintf(buf, "%s\n", input_names[channel]);
}
#define WM831X_VOLTAGE(id, name) \
static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \
NULL, name)
#define WM831X_NAMED_VOLTAGE(id, name) \
WM831X_VOLTAGE(id, name); \
static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \
NULL, name)
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
WM831X_VOLTAGE(0, WM831X_AUX_AUX1);
WM831X_VOLTAGE(1, WM831X_AUX_AUX2);
WM831X_VOLTAGE(2, WM831X_AUX_AUX3);
WM831X_VOLTAGE(3, WM831X_AUX_AUX4);
WM831X_NAMED_VOLTAGE(4, WM831X_AUX_SYSVDD);
WM831X_NAMED_VOLTAGE(5, WM831X_AUX_USB);
WM831X_NAMED_VOLTAGE(6, WM831X_AUX_BATT);
WM831X_NAMED_VOLTAGE(7, WM831X_AUX_WALL);
WM831X_NAMED_VOLTAGE(8, WM831X_AUX_BKUP_BATT);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_chip_temp, NULL,
WM831X_AUX_CHIP_TEMP);
static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
WM831X_AUX_CHIP_TEMP);
/* Report as a voltage since conversion depends on external components
* and that's what the ABI wants. */
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_voltage, NULL,
WM831X_AUX_BATT_TEMP);
static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL,
WM831X_AUX_BATT_TEMP);
static struct attribute *wm831x_attributes[] = {
&dev_attr_name.attr,
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in3_input.dev_attr.attr,
&sensor_dev_attr_in4_input.dev_attr.attr,
&sensor_dev_attr_in4_label.dev_attr.attr,
&sensor_dev_attr_in5_input.dev_attr.attr,
&sensor_dev_attr_in5_label.dev_attr.attr,
&sensor_dev_attr_in6_input.dev_attr.attr,
&sensor_dev_attr_in6_label.dev_attr.attr,
&sensor_dev_attr_in7_input.dev_attr.attr,
&sensor_dev_attr_in7_label.dev_attr.attr,
&sensor_dev_attr_in8_input.dev_attr.attr,
&sensor_dev_attr_in8_label.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_label.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp2_label.dev_attr.attr,
NULL
};
static const struct attribute_group wm831x_attr_group = {
.attrs = wm831x_attributes,
};
static int __devinit wm831x_hwmon_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_hwmon *hwmon;
int ret;
hwmon = kzalloc(sizeof(struct wm831x_hwmon), GFP_KERNEL);
if (!hwmon)
return -ENOMEM;
hwmon->wm831x = wm831x;
ret = sysfs_create_group(&pdev->dev.kobj, &wm831x_attr_group);
if (ret)
goto err;
hwmon->classdev = hwmon_device_register(&pdev->dev);
if (IS_ERR(hwmon->classdev)) {
ret = PTR_ERR(hwmon->classdev);
goto err_sysfs;
}
platform_set_drvdata(pdev, hwmon);
return 0;
err_sysfs:
sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
err:
kfree(hwmon);
return ret;
}
static int __devexit wm831x_hwmon_remove(struct platform_device *pdev)
{
struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev);
hwmon_device_unregister(hwmon->classdev);
sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
platform_set_drvdata(pdev, NULL);
kfree(hwmon);
return 0;
}
static struct platform_driver wm831x_hwmon_driver = {
.probe = wm831x_hwmon_probe,
.remove = __devexit_p(wm831x_hwmon_remove),
.driver = {
.name = "wm831x-hwmon",
.owner = THIS_MODULE,
},
};
static int __init wm831x_hwmon_init(void)
{
return platform_driver_register(&wm831x_hwmon_driver);
}
module_init(wm831x_hwmon_init);
static void __exit wm831x_hwmon_exit(void)
{
platform_driver_unregister(&wm831x_hwmon_driver);
}
module_exit(wm831x_hwmon_exit);
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("WM831x Hardware Monitoring");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm831x-hwmon");
drivers/hwmon/wm8350-hwmon.c 0 → 100644
View file @ 6f130478
/*
* drivers/hwmon/wm8350-hwmon.c - Wolfson Microelectronics WM8350 PMIC
* hardware monitoring features.
*
* Copyright (C) 2009 Wolfson Microelectronics plc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License v2 as published by the
* Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/mfd/wm8350/core.h>
#include <linux/mfd/wm8350/comparator.h>
static ssize_t show_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "wm8350\n");
}
static const char *input_names[] = {
[WM8350_AUXADC_USB] = "USB",
[WM8350_AUXADC_LINE] = "Line",
[WM8350_AUXADC_BATT] = "Battery",
};
static ssize_t show_voltage(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct wm8350 *wm8350 = dev_get_drvdata(dev);
int channel = to_sensor_dev_attr(attr)->index;
int val;
val = wm8350_read_auxadc(wm8350, channel, 0, 0) * WM8350_AUX_COEFF;
val = DIV_ROUND_CLOSEST(val, 1000);
return sprintf(buf, "%d\n", val);
}
static ssize_t show_label(struct device *dev,
struct device_attribute *attr, char *buf)
{
int channel = to_sensor_dev_attr(attr)->index;
return sprintf(buf, "%s\n", input_names[channel]);
}
#define WM8350_NAMED_VOLTAGE(id, name) \
static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\
NULL, name); \
static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \
NULL, name)
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
WM8350_NAMED_VOLTAGE(0, WM8350_AUXADC_USB);
WM8350_NAMED_VOLTAGE(1, WM8350_AUXADC_BATT);
WM8350_NAMED_VOLTAGE(2, WM8350_AUXADC_LINE);
static struct attribute *wm8350_attributes[] = {
&dev_attr_name.attr,
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in0_label.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_label.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in2_label.dev_attr.attr,
NULL,
};
static const struct attribute_group wm8350_attr_group = {
.attrs = wm8350_attributes,
};
static int __devinit wm8350_hwmon_probe(struct platform_device *pdev)
{
struct wm8350 *wm8350 = platform_get_drvdata(pdev);
int ret;
ret = sysfs_create_group(&pdev->dev.kobj, &wm8350_attr_group);
if (ret)
goto err;
wm8350->hwmon.classdev = hwmon_device_register(&pdev->dev);
if (IS_ERR(wm8350->hwmon.classdev)) {
ret = PTR_ERR(wm8350->hwmon.classdev);
goto err_group;
}
return 0;
err_group:
sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group);
err:
return ret;
}
static int __devexit wm8350_hwmon_remove(struct platform_device *pdev)
{
struct wm8350 *wm8350 = platform_get_drvdata(pdev);
hwmon_device_unregister(wm8350->hwmon.classdev);
sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group);
return 0;
}
static struct platform_driver wm8350_hwmon_driver = {
.probe = wm8350_hwmon_probe,
.remove = __devexit_p(wm8350_hwmon_remove),
.driver = {
.name = "wm8350-hwmon",
.owner = THIS_MODULE,
},
};
static int __init wm8350_hwmon_init(void)
{
return platform_driver_register(&wm8350_hwmon_driver);
}
module_init(wm8350_hwmon_init);
static void __exit wm8350_hwmon_exit(void)
{
platform_driver_unregister(&wm8350_hwmon_driver);
}
module_exit(wm8350_hwmon_exit);
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("WM8350 Hardware Monitoring");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm8350-hwmon");
drivers/input/misc/Kconfig
View file @ 6f130478
......@@ -279,4 +279,24 @@ config INPUT_BFIN_ROTARY
To compile this driver as a module, choose M here: the
module will be called bfin-rotary.
config INPUT_WM831X_ON
tristate "WM831X ON pin"
depends on MFD_WM831X
help
Support the ON pin of WM831X PMICs as an input device
reporting power button status.
To compile this driver as a module, choose M here: the module
will be called wm831x_on.
config INPUT_PCAP
tristate "Motorola EZX PCAP misc input events"
depends on EZX_PCAP
help
Say Y here if you want to use Power key and Headphone button
on Motorola EZX phones.
To compile this driver as a module, choose M here: the
module will be called pcap_keys.
endif
drivers/input/misc/Makefile
View file @ 6f130478
......@@ -16,6 +16,7 @@ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
......@@ -26,4 +27,6 @@ obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
drivers/input/misc/pcap_keys.c 0 → 100644
View file @ 6f130478
/*
* Input driver for PCAP events:
* * Power key
* * Headphone button
*
* Copyright (c) 2008,2009 Ilya Petrov <ilya.muromec@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/mfd/ezx-pcap.h>
struct pcap_keys {
struct pcap_chip *pcap;
struct input_dev *input;
};
/* PCAP2 interrupts us on keypress */
static irqreturn_t pcap_keys_handler(int irq, void *_pcap_keys)
{
struct pcap_keys *pcap_keys = _pcap_keys;
int pirq = irq_to_pcap(pcap_keys->pcap, irq);
u32 pstat;
ezx_pcap_read(pcap_keys->pcap, PCAP_REG_PSTAT, &pstat);
pstat &= 1 << pirq;
switch (pirq) {
case PCAP_IRQ_ONOFF:
input_report_key(pcap_keys->input, KEY_POWER, !pstat);
break;
case PCAP_IRQ_MIC:
input_report_key(pcap_keys->input, KEY_HP, !pstat);
break;
}
input_sync(pcap_keys->input);
return IRQ_HANDLED;
}
static int __devinit pcap_keys_probe(struct platform_device *pdev)
{
int err = -ENOMEM;
struct pcap_keys *pcap_keys;
struct input_dev *input_dev;
pcap_keys = kmalloc(sizeof(struct pcap_keys), GFP_KERNEL);
if (!pcap_keys)
return err;
pcap_keys->pcap = dev_get_drvdata(pdev->dev.parent);
input_dev = input_allocate_device();
if (!input_dev)
goto fail;
pcap_keys->input = input_dev;
platform_set_drvdata(pdev, pcap_keys);
input_dev->name = pdev->name;
input_dev->phys = "pcap-keys/input0";
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &pdev->dev;
__set_bit(EV_KEY, input_dev->evbit);
__set_bit(KEY_POWER, input_dev->keybit);
__set_bit(KEY_HP, input_dev->keybit);
err = input_register_device(input_dev);
if (err)
goto fail_allocate;
err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF),
pcap_keys_handler, 0, "Power key", pcap_keys);
if (err)
goto fail_register;
err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC),
pcap_keys_handler, 0, "Headphone button", pcap_keys);
if (err)
goto fail_pwrkey;
return 0;
fail_pwrkey:
free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys);
fail_register:
input_unregister_device(input_dev);
goto fail;
fail_allocate:
input_free_device(input_dev);
fail:
kfree(pcap_keys);
return err;
}
static int __devexit pcap_keys_remove(struct platform_device *pdev)
{
struct pcap_keys *pcap_keys = platform_get_drvdata(pdev);
free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys);
free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC), pcap_keys);
input_unregister_device(pcap_keys->input);
kfree(pcap_keys);
return 0;
}
static struct platform_driver pcap_keys_device_driver = {
.probe = pcap_keys_probe,
.remove = __devexit_p(pcap_keys_remove),
.driver = {
.name = "pcap-keys",
.owner = THIS_MODULE,
}
};
static int __init pcap_keys_init(void)
{
return platform_driver_register(&pcap_keys_device_driver);
};
static void __exit pcap_keys_exit(void)
{
platform_driver_unregister(&pcap_keys_device_driver);
};
module_init(pcap_keys_init);
module_exit(pcap_keys_exit);
MODULE_DESCRIPTION("Motorola PCAP2 input events driver");
MODULE_AUTHOR("Ilya Petrov <ilya.muromec@gmail.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pcap_keys");
drivers/input/misc/wm831x-on.c 0 → 100644
View file @ 6f130478
/**
* wm831x-on.c - WM831X ON pin driver
*
* Copyright (C) 2009 Wolfson Microelectronics plc
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file "COPYING" in the main directory of this
* archive for more details.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/workqueue.h>
#include <linux/mfd/wm831x/core.h>
struct wm831x_on {
struct input_dev *dev;
struct delayed_work work;
struct wm831x *wm831x;
};
/*
* The chip gives us an interrupt when the ON pin is asserted but we
* then need to poll to see when the pin is deasserted.
*/
static void wm831x_poll_on(struct work_struct *work)
{
struct wm831x_on *wm831x_on = container_of(work, struct wm831x_on,
work.work);
struct wm831x *wm831x = wm831x_on->wm831x;
int poll, ret;
ret = wm831x_reg_read(wm831x, WM831X_ON_PIN_CONTROL);
if (ret >= 0) {
poll = !(ret & WM831X_ON_PIN_STS);
input_report_key(wm831x_on->dev, KEY_POWER, poll);
input_sync(wm831x_on->dev);
} else {
dev_err(wm831x->dev, "Failed to read ON status: %d\n", ret);
poll = 1;
}
if (poll)
schedule_delayed_work(&wm831x_on->work, 100);
}
static irqreturn_t wm831x_on_irq(int irq, void *data)
{
struct wm831x_on *wm831x_on = data;
schedule_delayed_work(&wm831x_on->work, 0);
return IRQ_HANDLED;
}
static int __devinit wm831x_on_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_on *wm831x_on;
int irq = platform_get_irq(pdev, 0);
int ret;
wm831x_on = kzalloc(sizeof(struct wm831x_on), GFP_KERNEL);
if (!wm831x_on) {
dev_err(&pdev->dev, "Can't allocate data\n");
return -ENOMEM;
}
wm831x_on->wm831x = wm831x;
INIT_DELAYED_WORK(&wm831x_on->work, wm831x_poll_on);
wm831x_on->dev = input_allocate_device();
if (!wm831x_on->dev) {
dev_err(&pdev->dev, "Can't allocate input dev\n");
ret = -ENOMEM;
goto err;
}
wm831x_on->dev->evbit[0] = BIT_MASK(EV_KEY);
wm831x_on->dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
wm831x_on->dev->name = "wm831x_on";
wm831x_on->dev->phys = "wm831x_on/input0";
wm831x_on->dev->dev.parent = &pdev->dev;
ret = wm831x_request_irq(wm831x, irq, wm831x_on_irq,
IRQF_TRIGGER_RISING, "wm831x_on", wm831x_on);
if (ret < 0) {
dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret);
goto err_input_dev;
}
ret = input_register_device(wm831x_on->dev);
if (ret) {
dev_dbg(&pdev->dev, "Can't register input device: %d\n", ret);
goto err_irq;
}
platform_set_drvdata(pdev, wm831x_on);
return 0;
err_irq:
wm831x_free_irq(wm831x, irq, NULL);
err_input_dev:
input_free_device(wm831x_on->dev);
err:
kfree(wm831x_on);
return ret;
}
static int __devexit wm831x_on_remove(struct platform_device *pdev)
{
struct wm831x_on *wm831x_on = platform_get_drvdata(pdev);
int irq = platform_get_irq(pdev, 0);
wm831x_free_irq(wm831x_on->wm831x, irq, wm831x_on);
cancel_delayed_work_sync(&wm831x_on->work);
input_unregister_device(wm831x_on->dev);
kfree(wm831x_on);
return 0;
}
static struct platform_driver wm831x_on_driver = {
.probe = wm831x_on_probe,
.remove = __devexit_p(wm831x_on_remove),
.driver = {
.name = "wm831x-on",
.owner = THIS_MODULE,
},
};
static int __init wm831x_on_init(void)
{
return platform_driver_register(&wm831x_on_driver);
}
module_init(wm831x_on_init);
static void __exit wm831x_on_exit(void)
{
platform_driver_unregister(&wm831x_on_driver);
}
module_exit(wm831x_on_exit);
MODULE_ALIAS("platform:wm831x-on");
MODULE_DESCRIPTION("WM831x ON pin");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
drivers/input/touchscreen/Kconfig
View file @ 6f130478
......@@ -510,4 +510,13 @@ config TOUCHSCREEN_W90X900
To compile this driver as a module, choose M here: the
module will be called w90p910_ts.
config TOUCHSCREEN_PCAP
tristate "Motorola PCAP touchscreen"
depends on EZX_PCAP
help
Say Y here if you have a Motorola EZX telephone and
want to enable support for the built-in touchscreen.
To compile this driver as a module, choose M here: the
module will be called pcap_ts.
endif
drivers/input/touchscreen/Makefile
View file @ 6f130478
......@@ -40,3 +40,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o
drivers/input/touchscreen/pcap_ts.c 0 → 100644
View file @ 6f130478
/*
* Driver for Motorola PCAP2 touchscreen as found in the EZX phone platform.
*
* Copyright (C) 2006 Harald Welte <laforge@openezx.org>
* Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/pm.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/mfd/ezx-pcap.h>
struct pcap_ts {
struct pcap_chip *pcap;
struct input_dev *input;
struct delayed_work work;
u16 x, y;
u16 pressure;
u8 read_state;
};
#define SAMPLE_DELAY 20 /* msecs */
#define X_AXIS_MIN 0
#define X_AXIS_MAX 1023
#define Y_AXIS_MAX X_AXIS_MAX
#define Y_AXIS_MIN X_AXIS_MIN
#define PRESSURE_MAX X_AXIS_MAX
#define PRESSURE_MIN X_AXIS_MIN
static void pcap_ts_read_xy(void *data, u16 res[2])
{
struct pcap_ts *pcap_ts = data;
switch (pcap_ts->read_state) {
case PCAP_ADC_TS_M_PRESSURE:
/* pressure reading is unreliable */
if (res[0] > PRESSURE_MIN && res[0] < PRESSURE_MAX)
pcap_ts->pressure = res[0];
pcap_ts->read_state = PCAP_ADC_TS_M_XY;
schedule_delayed_work(&pcap_ts->work, 0);
break;
case PCAP_ADC_TS_M_XY:
pcap_ts->y = res[0];
pcap_ts->x = res[1];
if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX ||
pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) {
/* pen has been released */
input_report_abs(pcap_ts->input, ABS_PRESSURE, 0);
input_report_key(pcap_ts->input, BTN_TOUCH, 0);
pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY;
schedule_delayed_work(&pcap_ts->work, 0);
} else {
/* pen is touching the screen */
input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x);
input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y);
input_report_key(pcap_ts->input, BTN_TOUCH, 1);
input_report_abs(pcap_ts->input, ABS_PRESSURE,
pcap_ts->pressure);
/* switch back to pressure read mode */
pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE;
schedule_delayed_work(&pcap_ts->work,
msecs_to_jiffies(SAMPLE_DELAY));
}
input_sync(pcap_ts->input);
break;
default:
dev_warn(&pcap_ts->input->dev,
"pcap_ts: Warning, unhandled read_state %d\n",
pcap_ts->read_state);
break;
}
}
static void pcap_ts_work(struct work_struct *work)
{
struct delayed_work *dw = container_of(work, struct delayed_work, work);
struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work);
u8 ch[2];
pcap_set_ts_bits(pcap_ts->pcap,
pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY)
return;
/* start adc conversion */
ch[0] = PCAP_ADC_CH_TS_X1;
ch[1] = PCAP_ADC_CH_TS_Y1;
pcap_adc_async(pcap_ts->pcap, PCAP_ADC_BANK_1, 0, ch,
pcap_ts_read_xy, pcap_ts);
}
static irqreturn_t pcap_ts_event_touch(int pirq, void *data)
{
struct pcap_ts *pcap_ts = data;
if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) {
pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE;
schedule_delayed_work(&pcap_ts->work, 0);
}
return IRQ_HANDLED;
}
static int pcap_ts_open(struct input_dev *dev)
{
struct pcap_ts *pcap_ts = input_get_drvdata(dev);
pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY;
schedule_delayed_work(&pcap_ts->work, 0);
return 0;
}
static void pcap_ts_close(struct input_dev *dev)
{
struct pcap_ts *pcap_ts = input_get_drvdata(dev);
cancel_delayed_work_sync(&pcap_ts->work);
pcap_ts->read_state = PCAP_ADC_TS_M_NONTS;
pcap_set_ts_bits(pcap_ts->pcap,
pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
}
static int __devinit pcap_ts_probe(struct platform_device *pdev)
{
struct input_dev *input_dev;
struct pcap_ts *pcap_ts;
int err = -ENOMEM;
pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL);
if (!pcap_ts)
return err;
pcap_ts->pcap = dev_get_drvdata(pdev->dev.parent);
platform_set_drvdata(pdev, pcap_ts);
input_dev = input_allocate_device();
if (!input_dev)
goto fail;
INIT_DELAYED_WORK(&pcap_ts->work, pcap_ts_work);
pcap_ts->read_state = PCAP_ADC_TS_M_NONTS;
pcap_set_ts_bits(pcap_ts->pcap,
pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
pcap_ts->input = input_dev;
input_set_drvdata(input_dev, pcap_ts);
input_dev->name = "pcap-touchscreen";
input_dev->phys = "pcap_ts/input0";
input_dev->id.bustype = BUS_HOST;
input_dev->id.vendor = 0x0001;
input_dev->id.product = 0x0002;
input_dev->id.version = 0x0100;
input_dev->dev.parent = &pdev->dev;
input_dev->open = pcap_ts_open;
input_dev->close = pcap_ts_close;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN,
PRESSURE_MAX, 0, 0);
err = input_register_device(pcap_ts->input);
if (err)
goto fail_allocate;
err = request_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS),
pcap_ts_event_touch, 0, "Touch Screen", pcap_ts);
if (err)
goto fail_register;
return 0;
fail_register:
input_unregister_device(input_dev);
goto fail;
fail_allocate:
input_free_device(input_dev);
fail:
kfree(pcap_ts);
return err;
}
static int __devexit pcap_ts_remove(struct platform_device *pdev)
{
struct pcap_ts *pcap_ts = platform_get_drvdata(pdev);
free_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), pcap_ts);
cancel_delayed_work_sync(&pcap_ts->work);
input_unregister_device(pcap_ts->input);
kfree(pcap_ts);
return 0;
}
#ifdef CONFIG_PM
static int pcap_ts_suspend(struct device *dev)
{
struct pcap_ts *pcap_ts = dev_get_drvdata(dev);
pcap_set_ts_bits(pcap_ts->pcap, PCAP_ADC_TS_REF_LOWPWR);
return 0;
}
static int pcap_ts_resume(struct device *dev)
{
struct pcap_ts *pcap_ts = dev_get_drvdata(dev);
pcap_set_ts_bits(pcap_ts->pcap,
pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
return 0;
}
static struct dev_pm_ops pcap_ts_pm_ops = {
.suspend = pcap_ts_suspend,
.resume = pcap_ts_resume,
};
#define PCAP_TS_PM_OPS (&pcap_ts_pm_ops)
#else
#define PCAP_TS_PM_OPS NULL
#endif
static struct platform_driver pcap_ts_driver = {
.probe = pcap_ts_probe,
.remove = __devexit_p(pcap_ts_remove),
.driver = {
.name = "pcap-ts",
.owner = THIS_MODULE,
.pm = PCAP_TS_PM_OPS,
},
};
static int __init pcap_ts_init(void)
{
return platform_driver_register(&pcap_ts_driver);
}
static void __exit pcap_ts_exit(void)
{
platform_driver_unregister(&pcap_ts_driver);
}
module_init(pcap_ts_init);
module_exit(pcap_ts_exit);
MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver");
MODULE_AUTHOR("Daniel Ribeiro / Harald Welte");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pcap_ts");
drivers/mfd/Kconfig
View file @ 6f130478
......@@ -108,6 +108,19 @@ config TWL4030_CORE
high speed USB OTG transceiver, an audio codec (on most
versions) and many other features.
config TWL4030_POWER
bool "Support power resources on TWL4030 family chips"
depends on TWL4030_CORE && ARM
help
Say yes here if you want to use the power resources on the
TWL4030 family chips. Most of these resources are regulators,
which have a separate driver; some are control signals, such
as clock request handshaking.
This driver uses board-specific data to initialize the resources
and load scripts controling which resources are switched off/on
or reset when a sleep, wakeup or warm reset event occurs.
config MFD_TMIO
bool
default n
......@@ -157,6 +170,16 @@ config MFD_WM8400
the device, additional drivers must be enabled in order to use
the functionality of the device.
config MFD_WM831X
tristate "Support Wolfson Microelectronics WM831x PMICs"
select MFD_CORE
depends on I2C
help
Support for the Wolfson Microelecronics WM831x PMICs. This
driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
config MFD_WM8350
tristate
......@@ -228,6 +251,16 @@ config MFD_PCF50633
facilities, and registers devices for the various functions
so that function-specific drivers can bind to them.
config MFD_MC13783
tristate "Support Freescale MC13783"
depends on SPI_MASTER
select MFD_CORE
help
Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
config PCF50633_ADC
tristate "Support for NXP PCF50633 ADC"
depends on MFD_PCF50633
......@@ -256,6 +289,15 @@ config AB3100_CORE
LEDs, vibrator, system power and temperature, power management
and ALSA sound.
config AB3100_OTP
tristate "ST-Ericsson AB3100 OTP functions"
depends on AB3100_CORE
default y if AB3100_CORE
help
Select this to enable the AB3100 Mixed Signal IC OTP (one-time
programmable memory) support. This exposes a sysfs file to read
out OTP values.
config EZX_PCAP
bool "PCAP Support"
depends on GENERIC_HARDIRQS && SPI_MASTER
......
drivers/mfd/Makefile
View file @ 6f130478
......@@ -15,6 +15,8 @@ obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o
obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o
obj-$(CONFIG_MFD_WM8400) += wm8400-core.o
wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o
obj-$(CONFIG_MFD_WM831X) += wm831x.o
wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o
obj-$(CONFIG_MFD_WM8350) += wm8350.o
obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
......@@ -23,6 +25,9 @@ obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o
obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
obj-$(CONFIG_MFD_MC13783) += mc13783-core.o
obj-$(CONFIG_MFD_CORE) += mfd-core.o
......@@ -44,3 +49,4 @@ obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o
obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
drivers/mfd/ab3100-core.c
View file @ 6f130478
......@@ -14,7 +14,6 @@
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
......@@ -77,7 +76,7 @@ u8 ab3100_get_chip_type(struct ab3100 *ab3100)
}
EXPORT_SYMBOL(ab3100_get_chip_type);
int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval)
{
u8 regandval[2] = {reg, regval};
int err;
......@@ -107,9 +106,10 @@ int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
err = 0;
}
mutex_unlock(&ab3100->access_mutex);
return 0;
return err;
}
EXPORT_SYMBOL(ab3100_set_register);
EXPORT_SYMBOL(ab3100_set_register_interruptible);
/*
* The test registers exist at an I2C bus address up one
......@@ -118,7 +118,7 @@ EXPORT_SYMBOL(ab3100_set_register);
* anyway. It's currently only used from this file so declare
* it static and do not export.
*/
static int ab3100_set_test_register(struct ab3100 *ab3100,
static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100,
u8 reg, u8 regval)
{
u8 regandval[2] = {reg, regval};
......@@ -148,7 +148,8 @@ static int ab3100_set_test_register(struct ab3100 *ab3100,
return err;
}
int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval)
{
int err;
......@@ -202,9 +203,10 @@ int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
mutex_unlock(&ab3100->access_mutex);
return err;
}
EXPORT_SYMBOL(ab3100_get_register);
EXPORT_SYMBOL(ab3100_get_register_interruptible);
int ab3100_get_register_page(struct ab3100 *ab3100,
int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
u8 first_reg, u8 *regvals, u8 numregs)
{
int err;
......@@ -258,9 +260,10 @@ int ab3100_get_register_page(struct ab3100 *ab3100,
mutex_unlock(&ab3100->access_mutex);
return err;
}
EXPORT_SYMBOL(ab3100_get_register_page);
EXPORT_SYMBOL(ab3100_get_register_page_interruptible);
int ab3100_mask_and_set_register(struct ab3100 *ab3100,
int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
u8 reg, u8 andmask, u8 ormask)
{
u8 regandval[2] = {reg, 0};
......@@ -328,7 +331,8 @@ int ab3100_mask_and_set_register(struct ab3100 *ab3100,
mutex_unlock(&ab3100->access_mutex);
return err;
}
EXPORT_SYMBOL(ab3100_mask_and_set_register);
EXPORT_SYMBOL(ab3100_mask_and_set_register_interruptible);
/*
* Register a simple callback for handling any AB3100 events.
......@@ -371,7 +375,7 @@ static void ab3100_work(struct work_struct *work)
u32 fatevent;
int err;
err = ab3100_get_register_page(ab3100, AB3100_EVENTA1,
err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1,
event_regs, 3);
if (err)
goto err_event_wq;
......@@ -417,7 +421,7 @@ static irqreturn_t ab3100_irq_handler(int irq, void *data)
* stuff and we will re-enable the interrupts once th
* worker has finished.
*/
disable_irq(ab3100->i2c_client->irq);
disable_irq_nosync(irq);
schedule_work(&ab3100->work);
return IRQ_HANDLED;
}
......@@ -435,7 +439,7 @@ static int ab3100_registers_print(struct seq_file *s, void *p)
seq_printf(s, "AB3100 registers:\n");
for (reg = 0; reg < 0xff; reg++) {
ab3100_get_register(ab3100, reg, &value);
ab3100_get_register_interruptible(ab3100, reg, &value);
seq_printf(s, "[0x%x]: 0x%x\n", reg, value);
}
return 0;
......@@ -465,14 +469,14 @@ static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file)
return 0;
}
static int ab3100_get_set_reg(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
static ssize_t ab3100_get_set_reg(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ab3100_get_set_reg_priv *priv = file->private_data;
struct ab3100 *ab3100 = priv->ab3100;
char buf[32];
int buf_size;
ssize_t buf_size;
int regp;
unsigned long user_reg;
int err;
......@@ -515,7 +519,7 @@ static int ab3100_get_set_reg(struct file *file,
u8 reg = (u8) user_reg;
u8 regvalue;
ab3100_get_register(ab3100, reg, &regvalue);
ab3100_get_register_interruptible(ab3100, reg, &regvalue);
dev_info(ab3100->dev,
"debug read AB3100 reg[0x%02x]: 0x%02x\n",
......@@ -547,8 +551,8 @@ static int ab3100_get_set_reg(struct file *file,
return -EINVAL;
value = (u8) user_value;
ab3100_set_register(ab3100, reg, value);
ab3100_get_register(ab3100, reg, &regvalue);
ab3100_set_register_interruptible(ab3100, reg, value);
ab3100_get_register_interruptible(ab3100, reg, &regvalue);
dev_info(ab3100->dev,
"debug write reg[0x%02x] with 0x%02x, "
......@@ -662,7 +666,7 @@ ab3100_init_settings[] = {
.setting = 0x01
}, {
.abreg = AB3100_IMRB1,
.setting = 0xFF
.setting = 0xBF
}, {
.abreg = AB3100_IMRB2,
.setting = 0xFF
......@@ -696,7 +700,7 @@ static int __init ab3100_setup(struct ab3100 *ab3100)
int i;
for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
err = ab3100_set_register(ab3100,
err = ab3100_set_register_interruptible(ab3100,
ab3100_init_settings[i].abreg,
ab3100_init_settings[i].setting);
if (err)
......@@ -705,14 +709,14 @@ static int __init ab3100_setup(struct ab3100 *ab3100)
/*
* Special trick to make the AB3100 use the 32kHz clock (RTC)
* bit 3 in test registe 0x02 is a special, undocumented test
* bit 3 in test register 0x02 is a special, undocumented test
* register bit that only exist in AB3100 P1E
*/
if (ab3100->chip_id == 0xc4) {
dev_warn(ab3100->dev,
"AB3100 P1E variant detected, "
"forcing chip to 32KHz\n");
err = ab3100_set_test_register(ab3100, 0x02, 0x08);
err = ab3100_set_test_register_interruptible(ab3100, 0x02, 0x08);
}
exit_no_setup:
......@@ -833,6 +837,8 @@ static int __init ab3100_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct ab3100 *ab3100;
struct ab3100_platform_data *ab3100_plf_data =
client->dev.platform_data;
int err;
int i;
......@@ -852,8 +858,8 @@ static int __init ab3100_probe(struct i2c_client *client,
i2c_set_clientdata(client, ab3100);
/* Read chip ID register */
err = ab3100_get_register(ab3100, AB3100_CID,
&ab3100->chip_id);
err = ab3100_get_register_interruptible(ab3100, AB3100_CID,
&ab3100->chip_id);
if (err) {
dev_err(&client->dev,
"could not communicate with the AB3100 analog "
......@@ -916,6 +922,8 @@ static int __init ab3100_probe(struct i2c_client *client,
for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
ab3100_platform_devs[i]->dev.parent =
&client->dev;
ab3100_platform_devs[i]->dev.platform_data =
ab3100_plf_data;
platform_set_drvdata(ab3100_platform_devs[i], ab3100);
}
......
drivers/mfd/ab3100-otp.c 0 → 100644
View file @ 6f130478
/*
* drivers/mfd/ab3100_otp.c
*
* Copyright (C) 2007-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Driver to read out OTP from the AB3100 Mixed-signal circuit
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mfd/ab3100.h>
#include <linux/debugfs.h>
/* The OTP registers */
#define AB3100_OTP0 0xb0
#define AB3100_OTP1 0xb1
#define AB3100_OTP2 0xb2
#define AB3100_OTP3 0xb3
#define AB3100_OTP4 0xb4
#define AB3100_OTP5 0xb5
#define AB3100_OTP6 0xb6
#define AB3100_OTP7 0xb7
#define AB3100_OTPP 0xbf
/**
* struct ab3100_otp
* @dev containing device
* @ab3100 a pointer to the parent ab3100 device struct
* @locked whether the OTP is locked, after locking, no more bits
* can be changed but before locking it is still possible
* to change bits from 1->0.
* @freq clocking frequency for the OTP, this frequency is either
* 32768Hz or 1MHz/30
* @paf product activation flag, indicates whether this is a real
* product (paf true) or a lab board etc (paf false)
* @imeich if this is set it is possible to override the
* IMEI number found in the tac, fac and svn fields with
* (secured) software
* @cid customer ID
* @tac type allocation code of the IMEI
* @fac final assembly code of the IMEI
* @svn software version number of the IMEI
* @debugfs a debugfs file used when dumping to file
*/
struct ab3100_otp {
struct device *dev;
struct ab3100 *ab3100;
bool locked;
u32 freq;
bool paf;
bool imeich;
u16 cid:14;
u32 tac:20;
u8 fac;
u32 svn:20;
struct dentry *debugfs;
};
static int __init ab3100_otp_read(struct ab3100_otp *otp)
{
struct ab3100 *ab = otp->ab3100;
u8 otpval[8];
u8 otpp;
int err;
err = ab3100_get_register_interruptible(ab, AB3100_OTPP, &otpp);
if (err) {
dev_err(otp->dev, "unable to read OTPP register\n");
return err;
}
err = ab3100_get_register_page_interruptible(ab, AB3100_OTP0,
otpval, 8);
if (err) {
dev_err(otp->dev, "unable to read OTP register page\n");
return err;
}
/* Cache OTP properties, they never change by nature */
otp->locked = (otpp & 0x80);
otp->freq = (otpp & 0x40) ? 32768 : 34100;
otp->paf = (otpval[1] & 0x80);
otp->imeich = (otpval[1] & 0x40);
otp->cid = ((otpval[1] << 8) | otpval[0]) & 0x3fff;
otp->tac = ((otpval[4] & 0x0f) << 16) | (otpval[3] << 8) | otpval[2];
otp->fac = ((otpval[5] & 0x0f) << 4) | (otpval[4] >> 4);
otp->svn = (otpval[7] << 12) | (otpval[6] << 4) | (otpval[5] >> 4);
return 0;
}
/*
* This is a simple debugfs human-readable file that dumps out
* the contents of the OTP.
*/
#ifdef CONFIG_DEBUGFS
static int show_otp(struct seq_file *s, void *v)
{
struct ab3100_otp *otp = s->private;
int err;
seq_printf(s, "OTP is %s\n", otp->locked ? "LOCKED" : "UNLOCKED");
seq_printf(s, "OTP clock switch startup is %uHz\n", otp->freq);
seq_printf(s, "PAF is %s\n", otp->paf ? "SET" : "NOT SET");
seq_printf(s, "IMEI is %s\n", otp->imeich ?
"CHANGEABLE" : "NOT CHANGEABLE");
seq_printf(s, "CID: 0x%04x (decimal: %d)\n", otp->cid, otp->cid);
seq_printf(s, "IMEI: %u-%u-%u\n", otp->tac, otp->fac, otp->svn);
return 0;
}
static int ab3100_otp_open(struct inode *inode, struct file *file)
{
return single_open(file, ab3100_otp_show, inode->i_private);
}
static const struct file_operations ab3100_otp_operations = {
.open = ab3100_otp_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int __init ab3100_otp_init_debugfs(struct device *dev,
struct ab3100_otp *otp)
{
otp->debugfs = debugfs_create_file("ab3100_otp", S_IFREG | S_IRUGO,
NULL, otp,
&ab3100_otp_operations);
if (!otp->debugfs) {
dev_err(dev, "AB3100 debugfs OTP file registration failed!\n");
return err;
}
}
static void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
{
debugfs_remove_file(otp->debugfs);
}
#else
/* Compile this out if debugfs not selected */
static inline int __init ab3100_otp_init_debugfs(struct device *dev,
struct ab3100_otp *otp)
{
return 0;
}
static inline void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
{
}
#endif
#define SHOW_AB3100_ATTR(name) \
static ssize_t ab3100_otp_##name##_show(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
{\
struct ab3100_otp *otp = dev_get_drvdata(dev); \
return sprintf(buf, "%u\n", otp->name); \
}
SHOW_AB3100_ATTR(locked)
SHOW_AB3100_ATTR(freq)
SHOW_AB3100_ATTR(paf)
SHOW_AB3100_ATTR(imeich)
SHOW_AB3100_ATTR(cid)
SHOW_AB3100_ATTR(fac)
SHOW_AB3100_ATTR(tac)
SHOW_AB3100_ATTR(svn)
static struct device_attribute ab3100_otp_attrs[] = {
__ATTR(locked, S_IRUGO, ab3100_otp_locked_show, NULL),
__ATTR(freq, S_IRUGO, ab3100_otp_freq_show, NULL),
__ATTR(paf, S_IRUGO, ab3100_otp_paf_show, NULL),
__ATTR(imeich, S_IRUGO, ab3100_otp_imeich_show, NULL),
__ATTR(cid, S_IRUGO, ab3100_otp_cid_show, NULL),
__ATTR(fac, S_IRUGO, ab3100_otp_fac_show, NULL),
__ATTR(tac, S_IRUGO, ab3100_otp_tac_show, NULL),
__ATTR(svn, S_IRUGO, ab3100_otp_svn_show, NULL),
};
static int __init ab3100_otp_probe(struct platform_device *pdev)
{
struct ab3100_otp *otp;
int err = 0;
int i;
otp = kzalloc(sizeof(struct ab3100_otp), GFP_KERNEL);
if (!otp) {
dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n");
return -ENOMEM;
}
otp->dev = &pdev->dev;
/* Replace platform data coming in with a local struct */
otp->ab3100 = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, otp);
err = ab3100_otp_read(otp);
if (err)
return err;
dev_info(&pdev->dev, "AB3100 OTP readout registered\n");
/* sysfs entries */
for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) {
err = device_create_file(&pdev->dev,
&ab3100_otp_attrs[i]);
if (err)
goto out_no_sysfs;
}
/* debugfs entries */
err = ab3100_otp_init_debugfs(&pdev->dev, otp);
if (err)
goto out_no_debugfs;
return 0;
out_no_sysfs:
for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++)
device_remove_file(&pdev->dev,
&ab3100_otp_attrs[i]);
out_no_debugfs:
kfree(otp);
return err;
}
static int __exit ab3100_otp_remove(struct platform_device *pdev)
{
struct ab3100_otp *otp = platform_get_drvdata(pdev);
int i;
for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++)
device_remove_file(&pdev->dev,
&ab3100_otp_attrs[i]);
ab3100_otp_exit_debugfs(otp);
kfree(otp);
return 0;
}
static struct platform_driver ab3100_otp_driver = {
.driver = {
.name = "ab3100-otp",
.owner = THIS_MODULE,
},
.remove = __exit_p(ab3100_otp_remove),
};
static int __init ab3100_otp_init(void)
{
return platform_driver_probe(&ab3100_otp_driver,
ab3100_otp_probe);
}
static void __exit ab3100_otp_exit(void)
{
platform_driver_unregister(&ab3100_otp_driver);
}
module_init(ab3100_otp_init);
module_exit(ab3100_otp_exit);
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
MODULE_DESCRIPTION("AB3100 OTP Readout Driver");
MODULE_LICENSE("GPL");
drivers/mfd/dm355evm_msp.c
View file @ 6f130478
......@@ -107,8 +107,16 @@ static const u8 msp_gpios[] = {
MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1),
MSP_GPIO(4, SWITCH1),
/* switches on MMC/SD sockets */
MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC), /* mmc0 WP, nCD */
MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC), /* mmc1 WP, nCD */
/*
* Note: EVMDM355_ECP_VA4.pdf suggests that Bit 2 and 4 should be
* checked for card detection. However on the EVM bit 1 and 3 gives
* this status, for 0 and 1 instance respectively. The pdf also
* suggests that Bit 1 and 3 should be checked for write protection.
* However on the EVM bit 2 and 4 gives this status,for 0 and 1
* instance respectively.
*/
MSP_GPIO(2, SDMMC), MSP_GPIO(1, SDMMC), /* mmc0 WP, nCD */
MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC), /* mmc1 WP, nCD */
};
#define MSP_GPIO_REG(offset) (msp_gpios[(offset)] >> 3)
......
drivers/mfd/ezx-pcap.c
View file @ 6f130478
......@@ -17,6 +17,7 @@
#include <linux/irq.h>
#include <linux/mfd/ezx-pcap.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#define PCAP_ADC_MAXQ 8
struct pcap_adc_request {
......@@ -106,11 +107,35 @@ int ezx_pcap_read(struct pcap_chip *pcap, u8 reg_num, u32 *value)
}
EXPORT_SYMBOL_GPL(ezx_pcap_read);
int ezx_pcap_set_bits(struct pcap_chip *pcap, u8 reg_num, u32 mask, u32 val)
{
int ret;
u32 tmp = PCAP_REGISTER_READ_OP_BIT |
(reg_num << PCAP_REGISTER_ADDRESS_SHIFT);
mutex_lock(&pcap->io_mutex);
ret = ezx_pcap_putget(pcap, &tmp);
if (ret)
goto out_unlock;
tmp &= (PCAP_REGISTER_VALUE_MASK & ~mask);
tmp |= (val & mask) | PCAP_REGISTER_WRITE_OP_BIT |
(reg_num << PCAP_REGISTER_ADDRESS_SHIFT);
ret = ezx_pcap_putget(pcap, &tmp);
out_unlock:
mutex_unlock(&pcap->io_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(ezx_pcap_set_bits);
/* IRQ */
static inline unsigned int irq2pcap(struct pcap_chip *pcap, int irq)
int irq_to_pcap(struct pcap_chip *pcap, int irq)
{
return 1 << (irq - pcap->irq_base);
return irq - pcap->irq_base;
}
EXPORT_SYMBOL_GPL(irq_to_pcap);
int pcap_to_irq(struct pcap_chip *pcap, int irq)
{
......@@ -122,7 +147,7 @@ static void pcap_mask_irq(unsigned int irq)
{
struct pcap_chip *pcap = get_irq_chip_data(irq);
pcap->msr |= irq2pcap(pcap, irq);
pcap->msr |= 1 << irq_to_pcap(pcap, irq);
queue_work(pcap->workqueue, &pcap->msr_work);
}
......@@ -130,7 +155,7 @@ static void pcap_unmask_irq(unsigned int irq)
{
struct pcap_chip *pcap = get_irq_chip_data(irq);
pcap->msr &= ~irq2pcap(pcap, irq);
pcap->msr &= ~(1 << irq_to_pcap(pcap, irq));
queue_work(pcap->workqueue, &pcap->msr_work);
}
......@@ -154,34 +179,38 @@ static void pcap_isr_work(struct work_struct *work)
u32 msr, isr, int_sel, service;
int irq;
ezx_pcap_read(pcap, PCAP_REG_MSR, &msr);
ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);
do {
ezx_pcap_read(pcap, PCAP_REG_MSR, &msr);
ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);
/* We cant service/ack irqs that are assigned to port 2 */
if (!(pdata->config & PCAP_SECOND_PORT)) {
ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel);
isr &= ~int_sel;
}
ezx_pcap_write(pcap, PCAP_REG_ISR, isr);
/* We cant service/ack irqs that are assigned to port 2 */
if (!(pdata->config & PCAP_SECOND_PORT)) {
ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel);
isr &= ~int_sel;
}
local_irq_disable();
service = isr & ~msr;
ezx_pcap_write(pcap, PCAP_REG_MSR, isr | msr);
ezx_pcap_write(pcap, PCAP_REG_ISR, isr);
for (irq = pcap->irq_base; service; service >>= 1, irq++) {
if (service & 1) {
struct irq_desc *desc = irq_to_desc(irq);
local_irq_disable();
service = isr & ~msr;
for (irq = pcap->irq_base; service; service >>= 1, irq++) {
if (service & 1) {
struct irq_desc *desc = irq_to_desc(irq);
if (WARN(!desc, KERN_WARNING
"Invalid PCAP IRQ %d\n", irq))
break;
if (WARN(!desc, KERN_WARNING
"Invalid PCAP IRQ %d\n", irq))
break;
if (desc->status & IRQ_DISABLED)
note_interrupt(irq, desc, IRQ_NONE);
else
desc->handle_irq(irq, desc);
if (desc->status & IRQ_DISABLED)
note_interrupt(irq, desc, IRQ_NONE);
else
desc->handle_irq(irq, desc);
}
}
}
local_irq_enable();
local_irq_enable();
ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr);
} while (gpio_get_value(irq_to_gpio(pcap->spi->irq)));
}
static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc)
......@@ -194,6 +223,19 @@ static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc)
}
/* ADC */
void pcap_set_ts_bits(struct pcap_chip *pcap, u32 bits)
{
u32 tmp;
mutex_lock(&pcap->adc_mutex);
ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
tmp &= ~(PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR);
tmp |= bits & (PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR);
ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
mutex_unlock(&pcap->adc_mutex);
}
EXPORT_SYMBOL_GPL(pcap_set_ts_bits);
static void pcap_disable_adc(struct pcap_chip *pcap)
{
u32 tmp;
......@@ -216,15 +258,16 @@ static void pcap_adc_trigger(struct pcap_chip *pcap)
mutex_unlock(&pcap->adc_mutex);
return;
}
mutex_unlock(&pcap->adc_mutex);
/* start conversion on requested bank */
tmp = pcap->adc_queue[head]->flags | PCAP_ADC_ADEN;
/* start conversion on requested bank, save TS_M bits */
ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
tmp &= (PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR);
tmp |= pcap->adc_queue[head]->flags | PCAP_ADC_ADEN;
if (pcap->adc_queue[head]->bank == PCAP_ADC_BANK_1)
tmp |= PCAP_ADC_AD_SEL1;
ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
mutex_unlock(&pcap->adc_mutex);
ezx_pcap_write(pcap, PCAP_REG_ADR, PCAP_ADR_ASC);
}
......@@ -499,7 +542,7 @@ static void __exit ezx_pcap_exit(void)
spi_unregister_driver(&ezxpcap_driver);
}
module_init(ezx_pcap_init);
subsys_initcall(ezx_pcap_init);
module_exit(ezx_pcap_exit);
MODULE_LICENSE("GPL");
......
drivers/mfd/mc13783-core.c 0 → 100644
View file @ 6f130478
This diff is collapsed.
drivers/mfd/mfd-core.c
View file @ 6f130478
......@@ -25,7 +25,7 @@ static int mfd_add_device(struct device *parent, int id,
int ret = -ENOMEM;
int r;
pdev = platform_device_alloc(cell->name, id);
pdev = platform_device_alloc(cell->name, id + cell->id);
if (!pdev)
goto fail_alloc;
......
drivers/mfd/pcf50633-adc.c
View file @ 6f130478
......@@ -73,15 +73,10 @@ static void trigger_next_adc_job_if_any(struct pcf50633 *pcf)
struct pcf50633_adc *adc = __to_adc(pcf);
int head;
mutex_lock(&adc->queue_mutex);
head = adc->queue_head;
if (!adc->queue[head]) {
mutex_unlock(&adc->queue_mutex);
if (!adc->queue[head])
return;
}
mutex_unlock(&adc->queue_mutex);
adc_setup(pcf, adc->queue[head]->mux, adc->queue[head]->avg);
}
......@@ -99,16 +94,17 @@ adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req)
if (adc->queue[tail]) {
mutex_unlock(&adc->queue_mutex);
dev_err(pcf->dev, "ADC queue is full, dropping request\n");
return -EBUSY;
}
adc->queue[tail] = req;
if (head == tail)
trigger_next_adc_job_if_any(pcf);
adc->queue_tail = (tail + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1);
mutex_unlock(&adc->queue_mutex);
trigger_next_adc_job_if_any(pcf);
return 0;
}
......@@ -124,6 +120,7 @@ pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result)
int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg)
{
struct pcf50633_adc_request *req;
int err;
/* req is freed when the result is ready, in interrupt handler */
req = kzalloc(sizeof(*req), GFP_KERNEL);
......@@ -136,9 +133,13 @@ int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg)
req->callback_param = req;
init_completion(&req->completion);
adc_enqueue_request(pcf, req);
err = adc_enqueue_request(pcf, req);
if (err)
return err;
wait_for_completion(&req->completion);
/* FIXME by this time req might be already freed */
return req->result;
}
EXPORT_SYMBOL_GPL(pcf50633_adc_sync_read);
......@@ -159,9 +160,7 @@ int pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
req->callback = callback;
req->callback_param = callback_param;
adc_enqueue_request(pcf, req);
return 0;
return adc_enqueue_request(pcf, req);
}
EXPORT_SYMBOL_GPL(pcf50633_adc_async_read);
......@@ -184,7 +183,7 @@ static void pcf50633_adc_irq(int irq, void *data)
struct pcf50633_adc *adc = data;
struct pcf50633 *pcf = adc->pcf;
struct pcf50633_adc_request *req;
int head;
int head, res;
mutex_lock(&adc->queue_mutex);
head = adc->queue_head;
......@@ -199,12 +198,13 @@ static void pcf50633_adc_irq(int irq, void *data)
adc->queue_head = (head + 1) &
(PCF50633_MAX_ADC_FIFO_DEPTH - 1);
res = adc_result(pcf);
trigger_next_adc_job_if_any(pcf);
mutex_unlock(&adc->queue_mutex);
req->callback(pcf, req->callback_param, adc_result(pcf));
req->callback(pcf, req->callback_param, res);
kfree(req);
trigger_next_adc_job_if_any(pcf);
}
static int __devinit pcf50633_adc_probe(struct platform_device *pdev)
......
drivers/mfd/pcf50633-core.c
View file @ 6f130478
......@@ -444,7 +444,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data)
get_device(pcf->dev);
disable_irq_nosync(pcf->irq);
schedule_work(&pcf->irq_work);
queue_work(pcf->work_queue, &pcf->irq_work);
return IRQ_HANDLED;
}
......@@ -575,6 +575,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
pcf->dev = &client->dev;
pcf->i2c_client = client;
pcf->irq = client->irq;
pcf->work_queue = create_singlethread_workqueue("pcf50633");
INIT_WORK(&pcf->irq_work, pcf50633_irq_worker);
......@@ -651,6 +652,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
return 0;
err:
destroy_workqueue(pcf->work_queue);
kfree(pcf);
return ret;
}
......@@ -661,6 +663,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client)
int i;
free_irq(pcf->irq, pcf);
destroy_workqueue(pcf->work_queue);
platform_device_unregister(pcf->input_pdev);
platform_device_unregister(pcf->rtc_pdev);
......
drivers/mfd/twl4030-core.c
View file @ 6f130478
......@@ -89,6 +89,12 @@
#define twl_has_madc() false
#endif
#ifdef CONFIG_TWL4030_POWER
#define twl_has_power() true
#else
#define twl_has_power() false
#endif
#if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE)
#define twl_has_rtc() true
#else
......@@ -115,6 +121,12 @@
#define TWL4030_NUM_SLAVES 4
#if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \
|| defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE)
#define twl_has_pwrbutton() true
#else
#define twl_has_pwrbutton() false
#endif
/* Base Address defns for twl4030_map[] */
......@@ -538,6 +550,13 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
return PTR_ERR(child);
}
if (twl_has_pwrbutton()) {
child = add_child(1, "twl4030_pwrbutton",
NULL, 0, true, pdata->irq_base + 8 + 0, 0);
if (IS_ERR(child))
return PTR_ERR(child);
}
if (twl_has_regulator()) {
/*
child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1);
......@@ -788,6 +807,10 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
/* setup clock framework */
clocks_init(&client->dev);
/* load power event scripts */
if (twl_has_power() && pdata->power)
twl4030_power_init(pdata->power);
/* Maybe init the T2 Interrupt subsystem */
if (client->irq
&& pdata->irq_base
......
drivers/mfd/twl4030-irq.c
View file @ 6f130478
......@@ -424,7 +424,7 @@ static void twl4030_sih_do_edge(struct work_struct *work)
/* see what work we have */
spin_lock_irq(&sih_agent_lock);
edge_change = agent->edge_change;
agent->edge_change = 0;;
agent->edge_change = 0;
sih = edge_change ? agent->sih : NULL;
spin_unlock_irq(&sih_agent_lock);
if (!sih)
......
drivers/mfd/twl4030-power.c 0 → 100644
View file @ 6f130478
This diff is collapsed.
drivers/mfd/wm831x-core.c 0 → 100644
View file @ 6f130478
This diff is collapsed.
drivers/mfd/wm831x-irq.c 0 → 100644
View file @ 6f130478
This diff is collapsed.
drivers/mfd/wm831x-otp.c 0 → 100644
View file @ 6f130478
/*
* wm831x-otp.c -- OTP for Wolfson WM831x PMICs
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/bcd.h>
#include <linux/delay.h>
#include <linux/mfd/core.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/otp.h>
/* In bytes */
#define WM831X_UNIQUE_ID_LEN 16
/* Read the unique ID from the chip into id */
static int wm831x_unique_id_read(struct wm831x *wm831x, char *id)
{
int i, val;
for (i = 0; i < WM831X_UNIQUE_ID_LEN / 2; i++) {
val = wm831x_reg_read(wm831x, WM831X_UNIQUE_ID_1 + i);
if (val < 0)
return val;
id[i * 2] = (val >> 8) & 0xff;
id[(i * 2) + 1] = val & 0xff;
}
return 0;
}
static ssize_t wm831x_unique_id_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct wm831x *wm831x = dev_get_drvdata(dev);
int i, rval;
char id[WM831X_UNIQUE_ID_LEN];
ssize_t ret = 0;
rval = wm831x_unique_id_read(wm831x, id);
if (rval < 0)
return 0;
for (i = 0; i < WM831X_UNIQUE_ID_LEN; i++)
ret += sprintf(&buf[ret], "%02x", buf[i]);
ret += sprintf(&buf[ret], "\n");
return ret;
}
static DEVICE_ATTR(unique_id, 0444, wm831x_unique_id_show, NULL);
int wm831x_otp_init(struct wm831x *wm831x)
{
int ret;
ret = device_create_file(wm831x->dev, &dev_attr_unique_id);
if (ret != 0)
dev_err(wm831x->dev, "Unique ID attribute not created: %d\n",
ret);
return ret;
}
void wm831x_otp_exit(struct wm831x *wm831x)
{
device_remove_file(wm831x->dev, &dev_attr_unique_id);
}
drivers/mfd/wm8350-core.c
View file @ 6f130478
This diff is collapsed.
drivers/regulator/Kconfig
View file @ 6f130478
This diff is collapsed.
drivers/regulator/Makefile
View file @ 6f130478
This diff is collapsed.
drivers/regulator/ab3100.c 0 → 100644
View file @ 6f130478
This diff is collapsed.
drivers/regulator/core.c
View file @ 6f130478
This diff is collapsed.
drivers/regulator/mc13783.c 0 → 100644
View file @ 6f130478
This diff is collapsed.
drivers/regulator/pcap-regulator.c 0 → 100644
View file @ 6f130478
This diff is collapsed.
drivers/regulator/wm831x-dcdc.c 0 → 100644
View file @ 6f130478
This diff is collapsed.
drivers/regulator/wm831x-isink.c 0 → 100644
View file @ 6f130478
This diff is collapsed.
drivers/regulator/wm831x-ldo.c 0 → 100644
View file @ 6f130478
This diff is collapsed.
drivers/rtc/Kconfig
View file @ 6f130478
This diff is collapsed.
drivers/rtc/Makefile
View file @ 6f130478
This diff is collapsed.
drivers/rtc/rtc-ab3100.c 0 → 100644
View file @ 6f130478
This diff is collapsed.
drivers/rtc/rtc-wm831x.c 0 → 100644
View file @ 6f130478
This diff is collapsed.
include/linux/i2c/twl4030.h
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/ab3100.h
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/core.h
View file @ 6f130478
......@@ -23,6 +23,7 @@
*/
struct mfd_cell {
const char *name;
int id;
int (*enable)(struct platform_device *dev);
int (*disable)(struct platform_device *dev);
......
include/linux/mfd/ezx-pcap.h
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/mc13783-private.h 0 → 100644
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/mc13783.h 0 → 100644
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/pcf50633/adc.h
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/pcf50633/core.h
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/wm831x/auxadc.h 0 → 100644
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/wm831x/core.h 0 → 100644
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/wm831x/gpio.h 0 → 100644
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/wm831x/irq.h 0 → 100644
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/wm831x/otp.h 0 → 100644
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/wm831x/pdata.h 0 → 100644
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/wm831x/regulator.h 0 → 100644
View file @ 6f130478
This diff is collapsed.
include/linux/mfd/wm8350/core.h
View file @ 6f130478
This diff is collapsed.
include/linux/regulator/driver.h
View file @ 6f130478
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7