iwlwifi: move iwl_base_params to shared header

This is used from there, so should be in it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/iwlwifi/iwl-core.h

@@ -95,48 +95,6 @@ struct iwl_lib_ops {
 	void (*temperature)(struct iwl_priv *priv);
 };
 
-/*
- * @max_ll_items: max number of OTP blocks
- * @shadow_ram_support: shadow support for OTP memory
- * @led_compensation: compensate on the led on/off time per HW according
- *	to the deviation to achieve the desired led frequency.
- *	The detail algorithm is described in iwl-led.c
- * @chain_noise_num_beacons: number of beacons used to compute chain noise
- * @adv_thermal_throttle: support advance thermal throttle
- * @support_ct_kill_exit: support ct kill exit condition
- * @support_wimax_coexist: support wimax/wifi co-exist
- * @plcp_delta_threshold: plcp error rate threshold used to trigger
- *	radio tuning when there is a high receiving plcp error rate
- * @chain_noise_scale: default chain noise scale used for gain computation
- * @wd_timeout: TX queues watchdog timeout
- * @max_event_log_size: size of event log buffer size for ucode event logging
- * @shadow_reg_enable: HW shadhow register bit
- * @no_idle_support: do not support idle mode
- * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
- * wd_disable: disable watchdog timer
- */
-struct iwl_base_params {
-	int eeprom_size;
-	int num_of_queues;	/* def: HW dependent */
-	int num_of_ampdu_queues;/* def: HW dependent */
-	/* for iwl_apm_init() */
-	u32 pll_cfg_val;
-
-	const u16 max_ll_items;
-	const bool shadow_ram_support;
-	u16 led_compensation;
-	bool adv_thermal_throttle;
-	bool support_ct_kill_exit;
-	const bool support_wimax_coexist;
-	u8 plcp_delta_threshold;
-	s32 chain_noise_scale;
-	unsigned int wd_timeout;
-	u32 max_event_log_size;
-	const bool shadow_reg_enable;
-	const bool no_idle_support;
-	const bool hd_v2;
-	const bool wd_disable;
-};
 /*
  * @advanced_bt_coexist: support advanced bt coexist
  * @bt_init_traffic_load: specify initial bt traffic load

drivers/net/wireless/iwlwifi/iwl-shared.h

@@ -267,6 +267,49 @@ enum iwl_led_mode {
 	IWL_LED_DISABLE,
 };
 
+/*
+ * @max_ll_items: max number of OTP blocks
+ * @shadow_ram_support: shadow support for OTP memory
+ * @led_compensation: compensate on the led on/off time per HW according
+ *	to the deviation to achieve the desired led frequency.
+ *	The detail algorithm is described in iwl-led.c
+ * @chain_noise_num_beacons: number of beacons used to compute chain noise
+ * @adv_thermal_throttle: support advance thermal throttle
+ * @support_ct_kill_exit: support ct kill exit condition
+ * @support_wimax_coexist: support wimax/wifi co-exist
+ * @plcp_delta_threshold: plcp error rate threshold used to trigger
+ *	radio tuning when there is a high receiving plcp error rate
+ * @chain_noise_scale: default chain noise scale used for gain computation
+ * @wd_timeout: TX queues watchdog timeout
+ * @max_event_log_size: size of event log buffer size for ucode event logging
+ * @shadow_reg_enable: HW shadhow register bit
+ * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
+ * @no_idle_support: do not support idle mode
+ * wd_disable: disable watchdog timer
+ */
+struct iwl_base_params {
+	int eeprom_size;
+	int num_of_queues;	/* def: HW dependent */
+	int num_of_ampdu_queues;/* def: HW dependent */
+	/* for iwl_apm_init() */
+	u32 pll_cfg_val;
+
+	const u16 max_ll_items;
+	const bool shadow_ram_support;
+	u16 led_compensation;
+	bool adv_thermal_throttle;
+	bool support_ct_kill_exit;
+	const bool support_wimax_coexist;
+	u8 plcp_delta_threshold;
+	s32 chain_noise_scale;
+	unsigned int wd_timeout;
+	u32 max_event_log_size;
+	const bool shadow_reg_enable;
+	const bool hd_v2;
+	const bool no_idle_support;
+	const bool wd_disable;
+};
+
 /**
  * struct iwl_cfg
  * @name: Offical name of the device