Commit 702e0630 authored by Johannes Berg's avatar Johannes Berg Committed by John W. Linville

iwlwifi: move iwl_base_params to shared header

This is used from there, so should be in it.
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 7db5b989
...@@ -95,48 +95,6 @@ struct iwl_lib_ops { ...@@ -95,48 +95,6 @@ struct iwl_lib_ops {
void (*temperature)(struct iwl_priv *priv); void (*temperature)(struct iwl_priv *priv);
}; };
/*
* @max_ll_items: max number of OTP blocks
* @shadow_ram_support: shadow support for OTP memory
* @led_compensation: compensate on the led on/off time per HW according
* to the deviation to achieve the desired led frequency.
* The detail algorithm is described in iwl-led.c
* @chain_noise_num_beacons: number of beacons used to compute chain noise
* @adv_thermal_throttle: support advance thermal throttle
* @support_ct_kill_exit: support ct kill exit condition
* @support_wimax_coexist: support wimax/wifi co-exist
* @plcp_delta_threshold: plcp error rate threshold used to trigger
* radio tuning when there is a high receiving plcp error rate
* @chain_noise_scale: default chain noise scale used for gain computation
* @wd_timeout: TX queues watchdog timeout
* @max_event_log_size: size of event log buffer size for ucode event logging
* @shadow_reg_enable: HW shadhow register bit
* @no_idle_support: do not support idle mode
* @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
* wd_disable: disable watchdog timer
*/
struct iwl_base_params {
int eeprom_size;
int num_of_queues; /* def: HW dependent */
int num_of_ampdu_queues;/* def: HW dependent */
/* for iwl_apm_init() */
u32 pll_cfg_val;
const u16 max_ll_items;
const bool shadow_ram_support;
u16 led_compensation;
bool adv_thermal_throttle;
bool support_ct_kill_exit;
const bool support_wimax_coexist;
u8 plcp_delta_threshold;
s32 chain_noise_scale;
unsigned int wd_timeout;
u32 max_event_log_size;
const bool shadow_reg_enable;
const bool no_idle_support;
const bool hd_v2;
const bool wd_disable;
};
/* /*
* @advanced_bt_coexist: support advanced bt coexist * @advanced_bt_coexist: support advanced bt coexist
* @bt_init_traffic_load: specify initial bt traffic load * @bt_init_traffic_load: specify initial bt traffic load
......
...@@ -267,6 +267,49 @@ enum iwl_led_mode { ...@@ -267,6 +267,49 @@ enum iwl_led_mode {
IWL_LED_DISABLE, IWL_LED_DISABLE,
}; };
/*
* @max_ll_items: max number of OTP blocks
* @shadow_ram_support: shadow support for OTP memory
* @led_compensation: compensate on the led on/off time per HW according
* to the deviation to achieve the desired led frequency.
* The detail algorithm is described in iwl-led.c
* @chain_noise_num_beacons: number of beacons used to compute chain noise
* @adv_thermal_throttle: support advance thermal throttle
* @support_ct_kill_exit: support ct kill exit condition
* @support_wimax_coexist: support wimax/wifi co-exist
* @plcp_delta_threshold: plcp error rate threshold used to trigger
* radio tuning when there is a high receiving plcp error rate
* @chain_noise_scale: default chain noise scale used for gain computation
* @wd_timeout: TX queues watchdog timeout
* @max_event_log_size: size of event log buffer size for ucode event logging
* @shadow_reg_enable: HW shadhow register bit
* @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
* @no_idle_support: do not support idle mode
* wd_disable: disable watchdog timer
*/
struct iwl_base_params {
int eeprom_size;
int num_of_queues; /* def: HW dependent */
int num_of_ampdu_queues;/* def: HW dependent */
/* for iwl_apm_init() */
u32 pll_cfg_val;
const u16 max_ll_items;
const bool shadow_ram_support;
u16 led_compensation;
bool adv_thermal_throttle;
bool support_ct_kill_exit;
const bool support_wimax_coexist;
u8 plcp_delta_threshold;
s32 chain_noise_scale;
unsigned int wd_timeout;
u32 max_event_log_size;
const bool shadow_reg_enable;
const bool hd_v2;
const bool no_idle_support;
const bool wd_disable;
};
/** /**
* struct iwl_cfg * struct iwl_cfg
* @name: Offical name of the device * @name: Offical name of the device
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment