Commit 709c6e7b authored by Stephen Hemminger's avatar Stephen Hemminger

sky2: fiber pause bits

The advertisement bits for flow control are located in
different location on fiber (1000baseX)
Signed-off-by: default avatarStephen Hemminger <shemminger@osdl.org>
parent ebc646f6
...@@ -384,20 +384,31 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ...@@ -384,20 +384,31 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
adv |= PHY_M_AN_10_FD; adv |= PHY_M_AN_10_FD;
if (sky2->advertising & ADVERTISED_10baseT_Half) if (sky2->advertising & ADVERTISED_10baseT_Half)
adv |= PHY_M_AN_10_HD; adv |= PHY_M_AN_10_HD;
/* desired flow control */
if (sky2->tx_pause && sky2->rx_pause) /* both */
adv |= PHY_M_AN_PC | PHY_M_AN_ASP;
else if (sky2->tx_pause)
adv |= PHY_M_AN_ASP;
else if (sky2->rx_pause)
adv |= PHY_M_AN_PC;
} else { /* special defines for FIBER (88E1040S only) */ } else { /* special defines for FIBER (88E1040S only) */
if (sky2->advertising & ADVERTISED_1000baseT_Full) if (sky2->advertising & ADVERTISED_1000baseT_Full)
adv |= PHY_M_AN_1000X_AFD; adv |= PHY_M_AN_1000X_AFD;
if (sky2->advertising & ADVERTISED_1000baseT_Half) if (sky2->advertising & ADVERTISED_1000baseT_Half)
adv |= PHY_M_AN_1000X_AHD; adv |= PHY_M_AN_1000X_AHD;
}
/* Set Flow-control capabilities */ if (sky2->tx_pause && sky2->rx_pause) /* both */
if (sky2->tx_pause && sky2->rx_pause) adv |= PHY_M_P_BOTH_MD_X;
adv |= PHY_AN_PAUSE_CAP; /* symmetric */ else if (sky2->tx_pause)
else if (sky2->rx_pause && !sky2->tx_pause) adv |= PHY_M_P_ASYM_MD_X;
adv |= PHY_AN_PAUSE_ASYM | PHY_AN_PAUSE_CAP; else if (sky2->rx_pause)
else if (!sky2->rx_pause && sky2->tx_pause) adv |= PHY_M_P_SYM_MD_X;
adv |= PHY_AN_PAUSE_ASYM; /* local */ else
adv |= PHY_M_P_NO_PAUSE_X;
}
/* Restart Auto-negotiation */ /* Restart Auto-negotiation */
ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG; ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment