Commit 7866f5a0 authored by Henry Paulissen's avatar Henry Paulissen Committed by Linus Walleij

pinctrl: sunxi: Change mux setting on PI irq pins

While I was testing irq's on the cubietruck I found a couple of
not working irq pins. Further diving into the problem it opened
up a mess called "manual".

This so called manual (A20 user manual v1.3 dated 2014-10-10) says:

Pin overview:
    Page 237:       EINT26 is on mux 5.
    Page 288:       EINT26 is on mux 6.

The manual is so contradicting that further tests had to be made
to see which of the 2 statements where correct.

This patch is based on actual outcome of these tests and not what
the manual says.

Test procedure used:

Connect a 1 pulse per second (GPS) line to the pin.

echo pin### > /sys/class/gpio/export
echo in > /sys/class/gpio/gpio###/direction
echo rising > /sys/class/gpio/gpio###/edge

Check /proc/interrupts if a irq was attached and if irq's where
received.

Hardware used:
Henry Paulissen: Cubietruck
Andere Przywara: BananaPi M1
Tested-by: default avatarAndre Przywara <andre.przywara@arm.com>
Reviewed-by: default avatarAndre Przywara <andre.przywara@arm.com>
Signed-off-by: default avatarHenry Paulissen <henry@nitronetworks.nl>
Acked-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 9c24ef41
......@@ -956,65 +956,65 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* CS0 */
SUNXI_FUNCTION(0x3, "uart5"), /* TX */
SUNXI_FUNCTION_IRQ(0x5, 22)), /* EINT22 */
SUNXI_FUNCTION_IRQ(0x6, 22)), /* EINT22 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 11),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* CLK */
SUNXI_FUNCTION(0x3, "uart5"), /* RX */
SUNXI_FUNCTION_IRQ(0x5, 23)), /* EINT23 */
SUNXI_FUNCTION_IRQ(0x6, 23)), /* EINT23 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 12),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* MOSI */
SUNXI_FUNCTION(0x3, "uart6"), /* TX */
SUNXI_FUNCTION(0x4, "clk_out_a"), /* CLK_OUT_A */
SUNXI_FUNCTION_IRQ(0x5, 24)), /* EINT24 */
SUNXI_FUNCTION_IRQ(0x6, 24)), /* EINT24 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 13),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* MISO */
SUNXI_FUNCTION(0x3, "uart6"), /* RX */
SUNXI_FUNCTION(0x4, "clk_out_b"), /* CLK_OUT_B */
SUNXI_FUNCTION_IRQ(0x5, 25)), /* EINT25 */
SUNXI_FUNCTION_IRQ(0x6, 25)), /* EINT25 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 14),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* CS1 */
SUNXI_FUNCTION(0x3, "ps2"), /* SCK1 */
SUNXI_FUNCTION(0x4, "timer4"), /* TCLKIN0 */
SUNXI_FUNCTION_IRQ(0x5, 26)), /* EINT26 */
SUNXI_FUNCTION_IRQ(0x6, 26)), /* EINT26 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 15),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* CS1 */
SUNXI_FUNCTION(0x3, "ps2"), /* SDA1 */
SUNXI_FUNCTION(0x4, "timer5"), /* TCLKIN1 */
SUNXI_FUNCTION_IRQ(0x5, 27)), /* EINT27 */
SUNXI_FUNCTION_IRQ(0x6, 27)), /* EINT27 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 16),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* CS0 */
SUNXI_FUNCTION(0x3, "uart2"), /* RTS */
SUNXI_FUNCTION_IRQ(0x5, 28)), /* EINT28 */
SUNXI_FUNCTION_IRQ(0x6, 28)), /* EINT28 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 17),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* CLK */
SUNXI_FUNCTION(0x3, "uart2"), /* CTS */
SUNXI_FUNCTION_IRQ(0x5, 29)), /* EINT29 */
SUNXI_FUNCTION_IRQ(0x6, 29)), /* EINT29 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 18),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* MOSI */
SUNXI_FUNCTION(0x3, "uart2"), /* TX */
SUNXI_FUNCTION_IRQ(0x5, 30)), /* EINT30 */
SUNXI_FUNCTION_IRQ(0x6, 30)), /* EINT30 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 19),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* MISO */
SUNXI_FUNCTION(0x3, "uart2"), /* RX */
SUNXI_FUNCTION_IRQ(0x5, 31)), /* EINT31 */
SUNXI_FUNCTION_IRQ(0x6, 31)), /* EINT31 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 20),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment