pinctrl: sunxi: Change mux setting on PI irq pins

While I was testing irq's on the cubietruck I found a couple of
not working irq pins. Further diving into the problem it opened
up a mess called "manual".

This so called manual (A20 user manual v1.3 dated 2014-10-10) says:

Pin overview:
    Page 237:       EINT26 is on mux 5.
    Page 288:       EINT26 is on mux 6.

The manual is so contradicting that further tests had to be made
to see which of the 2 statements where correct.

This patch is based on actual outcome of these tests and not what
the manual says.

Test procedure used:

Connect a 1 pulse per second (GPS) line to the pin.

echo pin### > /sys/class/gpio/export
echo in > /sys/class/gpio/gpio###/direction
echo rising > /sys/class/gpio/gpio###/edge

Check /proc/interrupts if a irq was attached and if irq's where
received.

Hardware used:
Henry Paulissen: Cubietruck
Andere Przywara: BananaPi M1
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Henry Paulissen <henry@nitronetworks.nl>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c

@@ -956,65 +956,65 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi0"),		/* CS0 */
 		  SUNXI_FUNCTION(0x3, "uart5"),		/* TX */
-		  SUNXI_FUNCTION_IRQ(0x5, 22)),		/* EINT22 */
+		  SUNXI_FUNCTION_IRQ(0x6, 22)),		/* EINT22 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 11),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi0"),		/* CLK */
 		  SUNXI_FUNCTION(0x3, "uart5"),		/* RX */
-		  SUNXI_FUNCTION_IRQ(0x5, 23)),		/* EINT23 */
+		  SUNXI_FUNCTION_IRQ(0x6, 23)),		/* EINT23 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 12),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi0"),		/* MOSI */
 		  SUNXI_FUNCTION(0x3, "uart6"),		/* TX */
 		  SUNXI_FUNCTION(0x4, "clk_out_a"),	/* CLK_OUT_A */
-		  SUNXI_FUNCTION_IRQ(0x5, 24)),		/* EINT24 */
+		  SUNXI_FUNCTION_IRQ(0x6, 24)),		/* EINT24 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 13),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi0"),		/* MISO */
 		  SUNXI_FUNCTION(0x3, "uart6"),		/* RX */
 		  SUNXI_FUNCTION(0x4, "clk_out_b"),	/* CLK_OUT_B */
-		  SUNXI_FUNCTION_IRQ(0x5, 25)),		/* EINT25 */
+		  SUNXI_FUNCTION_IRQ(0x6, 25)),		/* EINT25 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 14),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi0"),		/* CS1 */
 		  SUNXI_FUNCTION(0x3, "ps2"),		/* SCK1 */
 		  SUNXI_FUNCTION(0x4, "timer4"),	/* TCLKIN0 */
-		  SUNXI_FUNCTION_IRQ(0x5, 26)),		/* EINT26 */
+		  SUNXI_FUNCTION_IRQ(0x6, 26)),		/* EINT26 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 15),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi1"),		/* CS1 */
 		  SUNXI_FUNCTION(0x3, "ps2"),		/* SDA1 */
 		  SUNXI_FUNCTION(0x4, "timer5"),	/* TCLKIN1 */
-		  SUNXI_FUNCTION_IRQ(0x5, 27)),		/* EINT27 */
+		  SUNXI_FUNCTION_IRQ(0x6, 27)),		/* EINT27 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 16),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi1"),		/* CS0 */
 		  SUNXI_FUNCTION(0x3, "uart2"),		/* RTS */
-		  SUNXI_FUNCTION_IRQ(0x5, 28)),		/* EINT28 */
+		  SUNXI_FUNCTION_IRQ(0x6, 28)),		/* EINT28 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 17),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi1"),		/* CLK */
 		  SUNXI_FUNCTION(0x3, "uart2"),		/* CTS */
-		  SUNXI_FUNCTION_IRQ(0x5, 29)),		/* EINT29 */
+		  SUNXI_FUNCTION_IRQ(0x6, 29)),		/* EINT29 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 18),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi1"),		/* MOSI */
 		  SUNXI_FUNCTION(0x3, "uart2"),		/* TX */
-		  SUNXI_FUNCTION_IRQ(0x5, 30)),		/* EINT30 */
+		  SUNXI_FUNCTION_IRQ(0x6, 30)),		/* EINT30 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 19),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi1"),		/* MISO */
 		  SUNXI_FUNCTION(0x3, "uart2"),		/* RX */
-		  SUNXI_FUNCTION_IRQ(0x5, 31)),		/* EINT31 */
+		  SUNXI_FUNCTION_IRQ(0x6, 31)),		/* EINT31 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 20),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),