Commit 78876691 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'mvebu-dt-4.2' of git://git.infradead.org/linux-mvebu into next/dt

Merge "mvebu dt changes for v4.2 (part #1)" from Gregory CLEMENT:

- A series adding support for the Compulab CM-A510
- Add alias for mdio on Armada 38x

* tag 'mvebu-dt-4.2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: add alias for mdio on Armada 38x
  ARM: dts: dove: Add Compulab SBC-A510 to Makefile
  ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510
  ARM: dts: dove: Remove Compulab CM-A510 from Makefile
  ARM: dts: dove: Add internal i2c multiplexer node
parents 0e5e5845 973ed083
...@@ -671,12 +671,12 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ ...@@ -671,12 +671,12 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-openblocks-ax3-4.dtb \ armada-xp-openblocks-ax3-4.dtb \
armada-xp-synology-ds414.dtb armada-xp-synology-ds414.dtb
dtb-$(CONFIG_MACH_DOVE) += \ dtb-$(CONFIG_MACH_DOVE) += \
dove-cm-a510.dtb \
dove-cubox.dtb \ dove-cubox.dtb \
dove-cubox-es.dtb \ dove-cubox-es.dtb \
dove-d2plug.dtb \ dove-d2plug.dtb \
dove-d3plug.dtb \ dove-d3plug.dtb \
dove-dove-db.dtb dove-dove-db.dtb \
dove-sbc-a510.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += \ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6589-aquaris5.dtb \ mt6589-aquaris5.dtb \
mt6592-evb.dtb \ mt6592-evb.dtb \
......
...@@ -495,7 +495,7 @@ eth0: ethernet@70000 { ...@@ -495,7 +495,7 @@ eth0: ethernet@70000 {
status = "disabled"; status = "disabled";
}; };
mdio@72004 { mdio: mdio@72004 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
compatible = "marvell,orion-mdio"; compatible = "marvell,orion-mdio";
......
/dts-v1/;
#include "dove.dtsi"
/ {
model = "Compulab CM-A510";
compatible = "compulab,cm-a510", "marvell,dove";
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
};
&uart0 { status = "okay"; };
&uart1 { status = "okay"; };
&sdio0 { status = "okay"; };
&sdio1 { status = "okay"; };
&sata0 { status = "okay"; };
&spi0 {
status = "okay";
/* spi0.0: 4M Flash Winbond W25Q32BV */
spi-flash@0 {
compatible = "st,w25q32";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
&i2c0 {
status = "okay";
};
/*
* Device Tree include for Compulab CM-A510 System-on-Module
*
* Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of the
* License.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* The CM-A510 comes with several optional components:
*
* Memory options:
* D512: 512M
* D1024: 1G
*
* NAND options:
* N512: 512M NAND
*
* Ethernet options:
* E1: PHY RTL8211D on internal GbE (SMI address 0x03)
* E2: Additional ethernet NIC RTL8111D on PCIe1
*
* Audio options:
* A: TI TLV320AIC23b audio codec (I2C address 0x1a)
*
* Touchscreen options:
* I: TI TSC2046 touchscreen controller (on SPI1)
*
* USB options:
* U2: 2 dual-role USB2.0 ports
* U4: 2 additional USB2.0 host ports (via USB1)
*
* WiFi options:
* W: Broadcom BCM4319 802.11b/g/n (USI WM-N-BM-01 on SDIO1)
*
* GPIOs used on CM-A510:
* 1 GbE PHY reset (active low)
* 3 WakeUp
* 8 PowerOff (active low)
* 13 Touchscreen pen irq (active low)
* 65 System LED (active high)
* 69 USB Hub reset (active low)
* 70 WLAN reset (active low)
* 71 WLAN regulator (active high)
*/
#include "dove.dtsi"
/ {
model = "Compulab CM-A510";
compatible = "compulab,cm-a510", "marvell,dove";
/*
* Set the minimum memory size here and let the
* bootloader set the real size.
*/
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
leds {
compatible = "gpio-leds";
/* Set upper NAND data bit to GPO */
pinctrl-0 = <&pmx_nand_gpo>;
pinctrl-names = "default";
system {
label = "cm-a510:system:green";
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
wifi_power: regulator@1 {
compatible = "regulator-fixed";
regulator-name = "WiFi Power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
};
};
};
/* Optional RTL8211D GbE PHY on SMI address 0x03 */
&ethphy {
reg = <3>;
status = "disabled";
};
&i2c0 {
/* Optional TI TLV320AIC23b audio codec */
opt_audio: audio@1a {
compatible = "ti,tlv320aic23";
reg = <0x1a>;
status = "disabled";
};
};
/* Optional RTL8111D GbE NIC on PCIe1 */
&pcie { status = "disabled"; };
&pcie1 {
pinctrl-0 = <&pmx_pcie1_clkreq>;
pinctrl-names = "default";
status = "disabled";
};
&pinctrl {
pmx_uart2: pmx-uart2 {
marvell,pins = "mpp14", "mpp15";
marvell,function = "uart2";
};
};
/* Optional Broadcom BCM4319 802.11b/g/n WiFi module */
&sdio1 {
non-removable;
vmmc-supply = <&wifi_power>;
reset-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
status = "disabled";
};
&spi0 {
status = "okay";
/* 1M Flash Winbond W25Q80BL */
flash@0 {
compatible = "winbond,w25q80";
spi-max-frequency = <80000000>;
reg = <0>;
};
};
&spi1 {
pinctrl-0 = <&pmx_spi1_20_23>;
pinctrl-names = "default";
status = "disabled";
/* Optional TI TSC2046 touchscreen controller */
opt_touch: touchscreen@0 {
compatible = "ti,tsc2046";
spi-max-frequency = <2500000>;
reg = <0>;
pinctrl-0 = <&pmx_gpio_13>;
pinctrl-names = "default";
interrupts-extended = <&gpio0 13 IRQ_TYPE_EDGE_FALLING>;
};
};
&uart2 {
pinctrl-0 = <&pmx_uart2>;
pinctrl-names = "default";
};
/*
* Device Tree file for Compulab SBC-A510 Single Board Computer
*
* Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of the
* License.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* SBC-A510 comprises a PCA9555 I2C GPIO expander its GPIO lines connected to
*
* 0.0 USB0 VBUS_EN (active high)
* 0.1 USB0 VBUS_GOOD
* 0.2 DVI transmitter TI TFP410 MSEN
* 0.3 DVI transmitter TI TFP410 PD# (active low power down)
* 0.4 LVDS transmitter DS90C365 PD# (active low power down)
* 0.5 LCD nRST (active low reset)
* 0.6 PCIe0 nRST (active low reset)
* 0.7 mini-PCIe slot W_DISABLE#
*
* 1.0 MMC WP
* 1.1 Camera Input FPC FLASH_STB and P21.5
* 1.2 Camera Input FPC WE and P21.22
* 1.3 MMC VCC_EN (active high) and P21.7
* 1.4 Camera Input FPC AFTR_RST and P21.17
* 1.5 Camera Input FPC OE and P21.19
* 1.6 Camera Input FPC SNPSHT and P21.6
* 1.7 Camera Input FPC SHTR and P21.10
*/
/dts-v1/;
#include "dove-cm-a510.dtsi"
/ {
model = "Compulab SBC-A510";
compatible = "compulab,sbc-a510", "compulab,cm-a510", "marvell,dove";
chosen {
stdout-path = &uart0;
};
regulators {
usb0_power: regulator@2 {
compatible = "regulator-fixed";
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
};
mmc_power: regulator@3 {
compatible = "regulator-fixed";
regulator-name = "MMC Power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
};
};
};
/* Ethernet0 depends on CM-A510 option E1 */
&mdio { status = "disabled"; };
&eth { status = "disabled"; };
&ethphy { status = "disabled"; };
/*
* USB port 0 can be powered and monitored by I2C GPIO expander:
* VBUS_ENABLE on GPIO0, VBUS_GOOD on GPIO1
*/
&ehci0 {
status = "okay";
vbus-supply = <&usb0_power>;
};
/* USB port 1 (and ports 2, 3 if CM-A510 has U4 option) */
&ehci1 { status = "okay"; };
/*
* I2C bus layout:
* i2c0:
* - Audio Codec, 0x1a (option from CM-A510)
* - DVI transmitter TI TFP410, 0x39
* - HDMI/DVI DDC channel
* i2c1:
* - GPIO expander, NXP PCA9555, 0x20
* - VGA DDC channel
*/
&i2c {
pinctrl-0 = <&pmx_i2c1>;
pinctrl-names = "default";
};
&i2c0 {
/* TI TFP410 DVI transmitter */
dvi: video@39 {
compatible = "ti,tfp410";
reg = <0x39>;
powerdown-gpio = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
};
};
&i2c1 {
status = "okay";
/* NXP PCA9555 GPIO expander */
gpio_ext: gpio@20 {
compatible = "nxp,pca9555";
reg = <0x20>;
#gpio-cells = <2>;
};
};
&pcie { status = "okay"; };
/*
* PCIe0 can be configured by Jumper E1 to be either connected to
* a mini-PCIe slot or a Pericom PI7C9X111 PCIe-to-PCI bridge.
*/
&pcie0 {
status = "okay";
pinctrl-0 = <&pmx_pcie0_clkreq>;
pinctrl-names = "default";
reset-gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>;
};
/* Ethernet1 depends on CM-A510 option E2 */
&pcie1 { status = "disabled"; };
/* SATA connector */
&sata0 { status = "okay"; };
/*
* SDIO0 is connected to a MMC/SD/SDIO socket, I2C GPIO expander has
* VCC_MMC_ENABLE on GPIO13, MMC_WP on GPIO10
*/
&sdio0 {
vmmc-supply = <&mmc_power>;
wp-gpios = <&gpio_ext 10 GPIO_ACTIVE_LOW>;
status = "okay";
};
/* UART0 on RS232 mini-connector */
&uart0 { status = "okay"; };
/* UART2 on pin headers */
&uart2 { status = "okay"; };
...@@ -33,6 +33,42 @@ l2: l2-cache { ...@@ -33,6 +33,42 @@ l2: l2-cache {
marvell,tauros2-cache-features = <0>; marvell,tauros2-cache-features = <0>;
}; };
i2c-mux {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c>;
pinctrl-names = "i2c0", "i2c1", "i2c2";
pinctrl-0 = <&pmx_i2cmux_0>;
pinctrl-1 = <&pmx_i2cmux_1>;
pinctrl-2 = <&pmx_i2cmux_2>;
i2c0: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
};
i2c1: i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
/* Requires pmx_i2c1 on i2c controller node */
status = "disabled";
};
i2c2: i2c@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
/* Requires pmx_i2c2 on i2c controller node */
status = "disabled";
};
};
mbus { mbus {
compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus"; compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
#address-cells = <2>; #address-cells = <2>;
...@@ -123,7 +159,7 @@ spi0: spi-ctrl@10600 { ...@@ -123,7 +159,7 @@ spi0: spi-ctrl@10600 {
status = "disabled"; status = "disabled";
}; };
i2c0: i2c-ctrl@11000 { i2c: i2c-ctrl@11000 {
compatible = "marvell,mv64xxx-i2c"; compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>; reg = <0x11000 0x20>;
#address-cells = <1>; #address-cells = <1>;
...@@ -132,7 +168,7 @@ i2c0: i2c-ctrl@11000 { ...@@ -132,7 +168,7 @@ i2c0: i2c-ctrl@11000 {
clock-frequency = <400000>; clock-frequency = <400000>;
timeout-ms = <1000>; timeout-ms = <1000>;
clocks = <&core_clk 0>; clocks = <&core_clk 0>;
status = "disabled"; status = "okay";
}; };
uart0: serial@12000 { uart0: serial@12000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment