Skip to content

L
linux
Commit 78b020d0 authored by Ingo Molnar's avatar Ingo Molnar
Browse files
Options

Merge branches 'x86/cleanups', 'x86/kexec', 'x86/mce2' and 'linus' into x86/core

parents bf5172d0 fee7b0d8 5490fa96 16b71fdf
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 6530 additions and 3656 deletions
Documentation/RCU/checklist.txt
View file @ 78b020d0
......@@ -298,3 +298,15 @@ over a rather long period of time, but improvements are always welcome!
Note that, rcu_assign_pointer() and rcu_dereference() relate to
SRCU just as they do to other forms of RCU.
15. The whole point of call_rcu(), synchronize_rcu(), and friends
is to wait until all pre-existing readers have finished before
carrying out some otherwise-destructive operation. It is
therefore critically important to -first- remove any path
that readers can follow that could be affected by the
destructive operation, and -only- -then- invoke call_rcu(),
synchronize_rcu(), or friends.
Because these primitives only wait for pre-existing readers,
it is the caller's responsibility to guarantee safety to
any subsequent readers.
Documentation/feature-removal-schedule.txt
View file @ 78b020d0
......@@ -335,3 +335,12 @@ Why: In 2.6.18 the Secmark concept was introduced to replace the "compat_net"
Secmark, it is time to deprecate the older mechanism and start the
process of removing the old code.
Who: Paul Moore <paul.moore@hp.com>
---------------------------
What: sysfs ui for changing p4-clockmod parameters
When: September 2009
Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
e088e4c9cdb618675874becb91b2fd581ee707e6.
Removal is subject to fixing any remaining bugs in ACPI which may
cause the thermal throttling not to happen at the right time.
Who: Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
Documentation/filesystems/squashfs.txt
View file @ 78b020d0
......@@ -22,7 +22,7 @@ Squashfs filesystem features versus Cramfs:
Squashfs Cramfs
Max filesystem size: 2^64 16 MiB
Max filesystem size: 2^64 256 MiB
Max file size: ~ 2 TiB 16 MiB
Max files: unlimited unlimited
Max directories: unlimited unlimited
......
Documentation/networking/ipv6.txt 0 → 100644
View file @ 78b020d0
Options for the ipv6 module are supplied as parameters at load time.
Module options may be given as command line arguments to the insmod
or modprobe command, but are usually specified in either the
/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
distro-specific configuration file.
The available ipv6 module parameters are listed below. If a parameter
is not specified the default value is used.
The parameters are as follows:
disable
Specifies whether to load the IPv6 module, but disable all
its functionality. This might be used when another module
has a dependency on the IPv6 module being loaded, but no
IPv6 addresses or operations are desired.
The possible values and their effects are:
0
IPv6 is enabled.
This is the default value.
1
IPv6 is disabled.
No IPv6 addresses will be added to interfaces, and
it will not be possible to open an IPv6 socket.
A reboot is required to enable IPv6.
Documentation/x86/earlyprintk.txt 0 → 100644
View file @ 78b020d0
Mini-HOWTO for using the earlyprintk=dbgp boot option with a
USB2 Debug port key and a debug cable, on x86 systems.
You need two computers, the 'USB debug key' special gadget and
and two USB cables, connected like this:
[host/target] <-------> [USB debug key] <-------> [client/console]
1. There are three specific hardware requirements:
a.) Host/target system needs to have USB debug port capability.
You can check this capability by looking at a 'Debug port' bit in
the lspci -vvv output:
# lspci -vvv
...
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo ThinkPad T61
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe227000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [58] Debug port: BAR=1 offset=00a0
^^^^^^^^^^^ <==================== [ HERE ]
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
...
( If your system does not list a debug port capability then you probably
wont be able to use the USB debug key. )
b.) You also need a Netchip USB debug cable/key:
http://www.plxtech.com/products/NET2000/NET20DC/default.asp
This is a small blue plastic connector with two USB connections,
it draws power from its USB connections.
c.) Thirdly, you need a second client/console system with a regular USB port.
2. Software requirements:
a.) On the host/target system:
You need to enable the following kernel config option:
CONFIG_EARLY_PRINTK_DBGP=y
And you need to add the boot command line: "earlyprintk=dbgp".
(If you are using Grub, append it to the 'kernel' line in
/etc/grub.conf)
NOTE: normally earlyprintk console gets turned off once the
regular console is alive - use "earlyprintk=dbgp,keep" to keep
this channel open beyond early bootup. This can be useful for
debugging crashes under Xorg, etc.
b.) On the client/console system:
You should enable the following kernel config option:
CONFIG_USB_SERIAL_DEBUG=y
On the next bootup with the modified kernel you should
get a /dev/ttyUSBx device(s).
Now this channel of kernel messages is ready to be used: start
your favorite terminal emulator (minicom, etc.) and set
it up to use /dev/ttyUSB0 - or use a raw 'cat /dev/ttyUSBx' to
see the raw output.
c.) On Nvidia Southbridge based systems: the kernel will try to probe
and find out which port has debug device connected.
3. Testing that it works fine:
You can test the output by using earlyprintk=dbgp,keep and provoking
kernel messages on the host/target system. You can provoke a harmless
kernel message by for example doing:
echo h > /proc/sysrq-trigger
On the host/target system you should see this help line in "dmesg" output:
SysRq : HELP : loglevel(0-9) reBoot Crashdump terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
On the client/console system do:
cat /dev/ttyUSB0
And you should see the help line above displayed shortly after you've
provoked it on the host system.
If it does not work then please ask about it on the linux-kernel@vger.kernel.org
mailing list or contact the x86 maintainers.
Makefile
View file @ 78b020d0
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 29
EXTRAVERSION = -rc6
EXTRAVERSION = -rc7
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
......
arch/alpha/mm/init.c
View file @ 78b020d0
......@@ -189,9 +189,21 @@ callback_init(void * kernel_end)
if (alpha_using_srm) {
static struct vm_struct console_remap_vm;
unsigned long vaddr = VMALLOC_START;
unsigned long nr_pages = 0;
unsigned long vaddr;
unsigned long i, j;
/* calculate needed size */
for (i = 0; i < crb->map_entries; ++i)
nr_pages += crb->map[i].count;
/* register the vm area */
console_remap_vm.flags = VM_ALLOC;
console_remap_vm.size = nr_pages << PAGE_SHIFT;
vm_area_register_early(&console_remap_vm, PAGE_SIZE);
vaddr = (unsigned long)console_remap_vm.addr;
/* Set up the third level PTEs and update the virtual
addresses of the CRB entries. */
for (i = 0; i < crb->map_entries; ++i) {
......@@ -213,12 +225,6 @@ callback_init(void * kernel_end)
vaddr += PAGE_SIZE;
}
}
/* Let vmalloc know that we've allocated some space. */
console_remap_vm.flags = VM_ALLOC;
console_remap_vm.addr = (void *) VMALLOC_START;
console_remap_vm.size = vaddr - VMALLOC_START;
vmlist = &console_remap_vm;
}
callback_init_done = 1;
......
arch/arm/kernel/setup.c
View file @ 78b020d0
......@@ -233,12 +233,13 @@ static void __init cacheid_init(void)
unsigned int cachetype = read_cpuid_cachetype();
unsigned int arch = cpu_architecture();
if (arch >= CPU_ARCH_ARMv7) {
cacheid = CACHEID_VIPT_NONALIASING;
if ((cachetype & (3 << 14)) == 1 << 14)
cacheid |= CACHEID_ASID_TAGGED;
} else if (arch >= CPU_ARCH_ARMv6) {
if (cachetype & (1 << 23))
if (arch >= CPU_ARCH_ARMv6) {
if ((cachetype & (7 << 29)) == 4 << 29) {
/* ARMv7 register format */
cacheid = CACHEID_VIPT_NONALIASING;
if ((cachetype & (3 << 14)) == 1 << 14)
cacheid |= CACHEID_ASID_TAGGED;
} else if (cachetype & (1 << 23))
cacheid = CACHEID_VIPT_ALIASING;
else
cacheid = CACHEID_VIPT_NONALIASING;
......
arch/arm/mach-at91/at91sam9263_devices.c
View file @ 78b020d0
......@@ -347,6 +347,111 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
/* --------------------------------------------------------------------
* Compact Flash (PCMCIA or IDE)
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
static struct at91_cf_data cf0_data;
static struct resource cf0_resources[] = {
[0] = {
.start = AT91_CHIPSELECT_4,
.end = AT91_CHIPSELECT_4 + SZ_256M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
}
};
static struct platform_device cf0_device = {
.id = 0,
.dev = {
.platform_data = &cf0_data,
},
.resource = cf0_resources,
.num_resources = ARRAY_SIZE(cf0_resources),
};
static struct at91_cf_data cf1_data;
static struct resource cf1_resources[] = {
[0] = {
.start = AT91_CHIPSELECT_5,
.end = AT91_CHIPSELECT_5 + SZ_256M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
}
};
static struct platform_device cf1_device = {
.id = 1,
.dev = {
.platform_data = &cf1_data,
},
.resource = cf1_resources,
.num_resources = ARRAY_SIZE(cf1_resources),
};
void __init at91_add_device_cf(struct at91_cf_data *data)
{
unsigned long ebi0_csa;
struct platform_device *pdev;
if (!data)
return;
/*
* assign CS4 or CS5 to SMC with Compact Flash logic support,
* we assume SMC timings are configured by board code,
* except True IDE where timings are controlled by driver
*/
ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
switch (data->chipselect) {
case 4:
at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */
ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
cf0_data = *data;
pdev = &cf0_device;
break;
case 5:
at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */
ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
cf1_data = *data;
pdev = &cf1_device;
break;
default:
printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
data->chipselect);
return;
}
at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
if (data->det_pin) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (data->irq_pin) {
at91_set_gpio_input(data->irq_pin, 1);
at91_set_deglitch(data->irq_pin, 1);
}
if (data->vcc_pin)
/* initially off */
at91_set_gpio_output(data->vcc_pin, 0);
/* enable EBI controlled pins */
at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */
at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */
at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */
at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
platform_device_register(pdev);
}
#else
void __init at91_add_device_cf(struct at91_cf_data *data) {}
#endif
/* --------------------------------------------------------------------
* NAND / SmartMedia
......
arch/arm/mach-at91/include/mach/board.h
View file @ 78b020d0
......@@ -56,6 +56,9 @@ struct at91_cf_data {
u8 vcc_pin; /* power switching */
u8 rst_pin; /* card reset */
u8 chipselect; /* EBI Chip Select number */
u8 flags;
#define AT91_CF_TRUE_IDE 0x01
#define AT91_IDE_SWAP_A0_A2 0x02
};
extern void __init at91_add_device_cf(struct at91_cf_data *data);
......
arch/arm/mach-at91/pm.c
View file @ 78b020d0
......@@ -332,7 +332,6 @@ static int at91_pm_enter(suspend_state_t state)
at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
error:
sdram_selfrefresh_disable();
target_state = PM_SUSPEND_ON;
at91_irq_resume();
at91_gpio_resume();
......
arch/arm/mach-omap2/board-ldp.c
View file @ 78b020d0
......@@ -81,7 +81,7 @@ static inline void __init ldp_init_smc911x(void)
}
ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
ldp_smc911x_resources[0].end = cs_mem_base + 0xf;
ldp_smc911x_resources[0].end = cs_mem_base + 0xff;
udelay(100);
eth_gpio = LDP_SMC911X_GPIO;
......
arch/arm/mm/abort-ev6.S
View file @ 78b020d0
......@@ -23,7 +23,8 @@ ENTRY(v6_early_abort)
#ifdef CONFIG_CPU_32v6K
clrex
#else
strex r0, r1, [sp] @ Clear the exclusive monitor
sub r1, sp, #4 @ Get unused stack location
strex r0, r1, [r1] @ Clear the exclusive monitor
#endif
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
......
arch/arm/plat-s3c64xx/irq-eint.c
View file @ 78b020d0
......@@ -55,7 +55,7 @@ static void s3c_irq_eint_unmask(unsigned int irq)
u32 mask;
mask = __raw_readl(S3C64XX_EINT0MASK);
mask |= eint_irq_to_bit(irq);
mask &= ~eint_irq_to_bit(irq);
__raw_writel(mask, S3C64XX_EINT0MASK);
}
......
arch/avr32/Kconfig
View file @ 78b020d0
......@@ -181,7 +181,7 @@ source "kernel/Kconfig.preempt"
config QUICKLIST
def_bool y
config HAVE_ARCH_BOOTMEM_NODE
config HAVE_ARCH_BOOTMEM
def_bool n
config ARCH_HAVE_MEMORY_PRESENT
......
arch/blackfin/Kconfig
View file @ 78b020d0
......@@ -1129,6 +1129,7 @@ endchoice
config PM_WAKEUP_BY_GPIO
bool "Allow Wakeup from Standby by GPIO"
depends on PM && !BF54x
config PM_WAKEUP_GPIO_NUMBER
int "GPIO number"
......@@ -1168,6 +1169,12 @@ config PM_BFIN_WAKE_GP
default n
help
Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
(all processors, except ADSP-BF549). This option sets
the general-purpose wake-up enable (GPWE) control bit to enable
wake-up upon detection of an active low signal on the /GPW (PH7) pin.
On ADSP-BF549 this option enables the the same functionality on the
/MRXON pin also PH7.
endmenu
menu "CPU Frequency scaling"
......
arch/blackfin/Kconfig.debug
View file @ 78b020d0
......@@ -21,12 +21,6 @@ config DEBUG_STACK_USAGE
config HAVE_ARCH_KGDB
def_bool y
config KGDB_TESTCASE
tristate "KGDB: for test case in expect"
default n
help
This is a kgdb test case for automated testing.
config DEBUG_VERBOSE
bool "Verbose fault messages"
default y
......
arch/blackfin/configs/BF518F-EZBRD_defconfig
View file @ 78b020d0
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Fri Jan 9 17:58:41 2009
# Linux kernel version: 2.6.28
# Fri Feb 20 10:01:44 2009
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
......@@ -133,10 +133,15 @@ CONFIG_BF518=y
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=0
CONFIG_BF_REV_MAX=2
......@@ -426,7 +431,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
CONFIG_NET_DSA=y
# CONFIG_NET_DSA_TAG_DSA is not set
# CONFIG_NET_DSA_TAG_EDSA is not set
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_NET_DSA_TAG_STPID=y
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_NET_DSA_KSZ8893M=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
......@@ -529,6 +544,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
......@@ -561,7 +578,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
......@@ -607,6 +626,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
......@@ -764,7 +784,23 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BITBANG is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
......@@ -788,8 +824,10 @@ CONFIG_BFIN_WDT=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
......@@ -861,10 +899,18 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
......@@ -1062,12 +1108,20 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_KGDB_TESTCASE is not set
CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
# CONFIG_DEBUG_HWERR is not set
......@@ -1100,6 +1154,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
......
arch/blackfin/configs/BF527-EZKIT_defconfig
View file @ 78b020d0
......@@ -327,8 +327,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
......
arch/blackfin/configs/BF533-EZKIT_defconfig
View file @ 78b020d0
......@@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
......
arch/blackfin/configs/BF533-STAMP_defconfig
View file @ 78b020d0
......@@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
......
arch/blackfin/configs/BF537-STAMP_defconfig
View file @ 78b020d0
......@@ -298,8 +298,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
......@@ -568,15 +568,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_BFIN is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=m
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
......
arch/blackfin/configs/BF538-EZKIT_defconfig
View file @ 78b020d0
......@@ -306,8 +306,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
......
arch/blackfin/configs/BF548-EZKIT_defconfig
View file @ 78b020d0
......@@ -361,8 +361,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_BFIN_L2_CACHEABLE is not set
# CONFIG_MPU is not set
......@@ -680,7 +680,7 @@ CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
......
arch/blackfin/configs/BF561-EZKIT_defconfig
View file @ 78b020d0
......@@ -329,8 +329,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_BFIN_L2_CACHEABLE is not set
# CONFIG_MPU is not set
......
arch/blackfin/configs/BlackStamp_defconfig
View file @ 78b020d0
......@@ -288,8 +288,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
......
arch/blackfin/configs/CM-BF527_defconfig
View file @ 78b020d0
......@@ -332,8 +332,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
......
arch/blackfin/configs/CM-BF548_defconfig
View file @ 78b020d0
......@@ -336,8 +336,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
# CONFIG_MPU is not set
......@@ -595,7 +595,7 @@ CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
......
arch/blackfin/configs/IP0X_defconfig
View file @ 78b020d0
......@@ -612,7 +612,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
......
arch/blackfin/configs/SRV1_defconfig
View file @ 78b020d0
......@@ -282,8 +282,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
#
......
arch/blackfin/include/asm/Kbuild
View file @ 78b020d0
include include/asm-generic/Kbuild.asm
unifdef-y += bfin_sport.h
unifdef-y += fixed_code.h
arch/blackfin/include/asm/bfin_sport.h
View file @ 78b020d0
/*
* File: include/asm-blackfin/bfin_sport.h
* Based on:
* Author: Roy Huang (roy.huang@analog.com)
* bfin_sport.h - userspace header for bfin sport driver
*
* Created: Thu Aug. 24 2006
* Description:
* Copyright 2004-2008 Analog Devices Inc.
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* Licensed under the GPL-2 or later.
*/
#ifndef __BFIN_SPORT_H__
......@@ -42,11 +21,10 @@
#define NORM_FORMAT 0x0
#define ALAW_FORMAT 0x2
#define ULAW_FORMAT 0x3
struct sport_register;
/* Function driver which use sport must initialize the structure */
struct sport_config {
/*TDM (multichannels), I2S or other mode */
/* TDM (multichannels), I2S or other mode */
unsigned int mode:3;
/* if TDM mode is selected, channels must be set */
......@@ -72,12 +50,18 @@ struct sport_config {
int serial_clk;
int fsync_clk;
unsigned int data_format:2; /*Normal, u-law or a-law */
unsigned int data_format:2; /* Normal, u-law or a-law */
int word_len; /* How length of the word in bits, 3-32 bits */
int dma_enabled;
};
/* Userspace interface */
#define SPORT_IOC_MAGIC 'P'
#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config)
#ifdef __KERNEL__
struct sport_register {
unsigned short tcr1;
unsigned short reserved0;
......@@ -117,9 +101,6 @@ struct sport_register {
unsigned long mrcs3;
};
#define SPORT_IOC_MAGIC 'P'
#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config)
struct sport_dev {
struct cdev cdev; /* Char device structure */
......@@ -149,6 +130,8 @@ struct sport_dev {
struct sport_config config;
};
#endif
#define SPORT_TCR1 0
#define SPORT_TCR2 1
#define SPORT_TCLKDIV 2
......@@ -169,4 +152,4 @@ struct sport_dev {
#define SPORT_MRCS2 22
#define SPORT_MRCS3 23
#endif /*__BFIN_SPORT_H__*/
#endif
arch/blackfin/include/asm/ipipe.h
View file @ 78b020d0
......@@ -35,9 +35,9 @@
#include <asm/atomic.h>
#include <asm/traps.h>
#define IPIPE_ARCH_STRING "1.8-00"
#define IPIPE_ARCH_STRING "1.9-00"
#define IPIPE_MAJOR_NUMBER 1
#define IPIPE_MINOR_NUMBER 8
#define IPIPE_MINOR_NUMBER 9
#define IPIPE_PATCH_NUMBER 0
#ifdef CONFIG_SMP
......@@ -83,9 +83,9 @@ struct ipipe_sysinfo {
"%2 = CYCLES2\n" \
"CC = %2 == %0\n" \
"if ! CC jump 1b\n" \
: "=r" (((unsigned long *)&t)[1]), \
"=r" (((unsigned long *)&t)[0]), \
"=r" (__cy2) \
: "=d,a" (((unsigned long *)&t)[1]), \
"=d,a" (((unsigned long *)&t)[0]), \
"=d,a" (__cy2) \
: /*no input*/ : "CC"); \
t; \
})
......@@ -118,35 +118,40 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd,
#define __ipipe_disable_irq(irq) (irq_desc[irq].chip->mask(irq))
#define __ipipe_lock_root() \
set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
static inline int __ipipe_check_tickdev(const char *devname)
{
return 1;
}
#define __ipipe_unlock_root() \
clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
static inline void __ipipe_lock_root(void)
{
set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
}
static inline void __ipipe_unlock_root(void)
{
clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
}
void __ipipe_enable_pipeline(void);
#define __ipipe_hook_critical_ipi(ipd) do { } while (0)
#define __ipipe_sync_pipeline(syncmask) \
do { \
struct ipipe_domain *ipd = ipipe_current_domain; \
if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
__ipipe_sync_stage(syncmask); \
} while (0)
#define __ipipe_sync_pipeline ___ipipe_sync_pipeline
void ___ipipe_sync_pipeline(unsigned long syncmask);
void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
int __ipipe_get_irq_priority(unsigned irq);
int __ipipe_get_irqthread_priority(unsigned irq);
void __ipipe_stall_root_raw(void);
void __ipipe_unstall_root_raw(void);
void __ipipe_serial_debug(const char *fmt, ...);
asmlinkage void __ipipe_call_irqtail(unsigned long addr);
DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
extern unsigned long __ipipe_core_clock;
......@@ -162,42 +167,25 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
#define __ipipe_run_irqtail() /* Must be a macro */ \
do { \
asmlinkage void __ipipe_call_irqtail(void); \
unsigned long __pending; \
CSYNC(); \
CSYNC(); \
__pending = bfin_read_IPEND(); \
if (__pending & 0x8000) { \
__pending &= ~0x8010; \
if (__pending && (__pending & (__pending - 1)) == 0) \
__ipipe_call_irqtail(); \
__ipipe_call_irqtail(__ipipe_irq_tail_hook); \
} \
} while (0)
#define __ipipe_run_isr(ipd, irq) \
do { \
if (ipd == ipipe_root_domain) { \
/* \
* Note: the I-pipe implements a threaded interrupt model on \
* this arch for Linux external IRQs. The interrupt handler we \
* call here only wakes up the associated IRQ thread. \
*/ \
if (ipipe_virtual_irq_p(irq)) { \
/* No irqtail here; virtual interrupts have no effect \
on IPEND so there is no need for processing \
deferral. */ \
local_irq_enable_nohead(ipd); \
local_irq_enable_hw(); \
if (ipipe_virtual_irq_p(irq)) \
ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
local_irq_disable_nohead(ipd); \
} else \
/* \
* No need to run the irqtail here either; \
* we can't be preempted by hw IRQs, so \
* non-Linux IRQs cannot stack over the short \
* thread wakeup code. Which in turn means \
* that no irqtail condition could be pending \
* for domains above Linux in the pipeline. \
*/ \
else \
ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
local_irq_disable_hw(); \
} else { \
__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
local_irq_enable_nohead(ipd); \
......@@ -217,42 +205,24 @@ void ipipe_init_irq_threads(void);
int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
#define IS_SYSIRQ(irq) ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
#define IS_GPIOIRQ(irq) ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
#ifdef CONFIG_GENERIC_CLOCKEVENTS
#define IRQ_SYSTMR IRQ_CORETMR
#define IRQ_PRIOTMR IRQ_CORETMR
#else
#define IRQ_SYSTMR IRQ_TIMER0
#define IRQ_PRIOTMR CONFIG_IRQ_TIMER0
#endif
#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
#define PRIO_GPIODEMUX(irq) CONFIG_PFA
#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
#define PRIO_GPIODEMUX(irq) CONFIG_IRQ_PROG_INTA
#elif defined(CONFIG_BF52x)
#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
(irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
(irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
-1)
#elif defined(CONFIG_BF561)
#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
(irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
(irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
-1)
#ifdef CONFIG_BF561
#define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val)
#define bfin_write_TIMER_ENABLE(val) bfin_write_TMRS8_ENABLE(val)
#define bfin_write_TIMER_STATUS(val) bfin_write_TMRS8_STATUS(val)
#define bfin_read_TIMER_STATUS() bfin_read_TMRS8_STATUS()
#elif defined(CONFIG_BF54x)
#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
(irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
(irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
(irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
-1)
#define bfin_write_TIMER_DISABLE(val) bfin_write_TIMER_DISABLE0(val)
#define bfin_write_TIMER_ENABLE(val) bfin_write_TIMER_ENABLE0(val)
#define bfin_write_TIMER_STATUS(val) bfin_write_TIMER_STATUS0(val)
#define bfin_read_TIMER_STATUS(val) bfin_read_TIMER_STATUS0(val)
#else
# error "no PRIO_GPIODEMUX() for this part"
#endif
#define __ipipe_root_tick_p(regs) ((regs->ipend & 0x10) != 0)
......@@ -275,4 +245,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
#endif /* !CONFIG_IPIPE */
#define ipipe_update_tick_evtdev(evtdev) do { } while (0)
#endif /* !__ASM_BLACKFIN_IPIPE_H */
arch/blackfin/include/asm/ipipe_base.h
View file @ 78b020d0
/* -*- linux-c -*-
* include/asm-blackfin/_baseipipe.h
* include/asm-blackfin/ipipe_base.h
*
* Copyright (C) 2007 Philippe Gerum.
*
......@@ -27,8 +27,9 @@
#define IPIPE_NR_XIRQS NR_IRQS
#define IPIPE_IRQ_ISHIFT 5 /* 2^5 for 32bits arch. */
/* Blackfin-specific, global domain flags */
#define IPIPE_ROOTLOCK_FLAG 1 /* Lock pipeline for root */
/* Blackfin-specific, per-cpu pipeline status */
#define IPIPE_SYNCDEFER_FLAG 15
#define IPIPE_SYNCDEFER_MASK (1L << IPIPE_SYNCDEFER_MASK)
/* Blackfin traps -- i.e. exception vector numbers */
#define IPIPE_NR_FAULTS 52 /* We leave a gap after VEC_ILL_RES. */
......@@ -48,11 +49,6 @@
#ifndef __ASSEMBLY__
#include <linux/bitops.h>
extern int test_bit(int nr, const void *addr);
extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
static inline void __ipipe_stall_root(void)
......
arch/blackfin/include/asm/irq.h
View file @ 78b020d0
......@@ -61,20 +61,38 @@ void __ipipe_restore_root(unsigned long flags);
#define raw_irqs_disabled_flags(flags) (!irqs_enabled_from_flags_hw(flags))
#define local_test_iflag_hw(x) irqs_enabled_from_flags_hw(x)
#define local_save_flags(x) \
do { \
(x) = __ipipe_test_root() ? \
#define local_save_flags(x) \
do { \
(x) = __ipipe_test_root() ? \
__all_masked_irq_flags : bfin_irq_flags; \
barrier(); \
} while (0)
#define local_irq_save(x) \
do { \
(x) = __ipipe_test_and_stall_root(); \
#define local_irq_save(x) \
do { \
(x) = __ipipe_test_and_stall_root() ? \
__all_masked_irq_flags : bfin_irq_flags; \
barrier(); \
} while (0)
static inline void local_irq_restore(unsigned long x)
{
barrier();
__ipipe_restore_root(x == __all_masked_irq_flags);
}
#define local_irq_disable() \
do { \
__ipipe_stall_root(); \
barrier(); \
} while (0)
#define local_irq_restore(x) __ipipe_restore_root(x)
#define local_irq_disable() __ipipe_stall_root()
#define local_irq_enable() __ipipe_unstall_root()
static inline void local_irq_enable(void)
{
barrier();
__ipipe_unstall_root();
}
#define irqs_disabled() __ipipe_test_root()
#define local_save_flags_hw(x) \
......
arch/blackfin/include/asm/percpu.h
View file @ 78b020d0
......@@ -3,14 +3,4 @@
#include <asm-generic/percpu.h>
#ifdef CONFIG_MODULES
#define PERCPU_MODULE_RESERVE 8192
#else
#define PERCPU_MODULE_RESERVE 0
#endif
#define PERCPU_ENOUGH_ROOM \
(ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) + \
PERCPU_MODULE_RESERVE)
#endif /* __ARCH_BLACKFIN_PERCPU__ */
arch/blackfin/include/asm/thread_info.h
View file @ 78b020d0
......@@ -122,6 +122,7 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_MEMDIE 4
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
#define TIF_FREEZE 6 /* is freezing for suspend */
#define TIF_IRQ_SYNC 7 /* sync pipeline stage */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
......@@ -130,6 +131,7 @@ static inline struct thread_info *current_thread_info(void)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
......
arch/blackfin/kernel/Makefile
View file @ 78b020d0
......@@ -15,13 +15,15 @@ else
obj-y += time.o
endif
CFLAGS_kgdb_test.o := -mlong-calls -O0
obj-$(CONFIG_IPIPE) += ipipe.o
obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_KGDB_TESTCASE) += kgdb_test.o
obj-$(CONFIG_KGDB_TESTS) += kgdb_test.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
# the kgdb test puts code into L2 and without linker
# relaxation, we need to force long calls to/from it
CFLAGS_kgdb_test.o := -mlong-calls -O0
arch/blackfin/kernel/cplb-nompu/cplbinit.c
View file @ 78b020d0
......@@ -53,9 +53,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
i_d = i_i = 0;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
/* Set up the zero page. */
d_tbl[i_d].addr = 0;
d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
i_tbl[i_i].addr = 0;
i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
#endif
/* Cover kernel memory with 4M pages. */
addr = 0;
......
arch/blackfin/kernel/ipipe.c
View file @ 78b020d0
......@@ -35,14 +35,8 @@
#include <asm/atomic.h>
#include <asm/io.h>
static int create_irq_threads;
DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask);
static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count);
asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
static void __ipipe_no_irqtail(void);
......@@ -93,6 +87,7 @@ void __ipipe_enable_pipeline(void)
*/
void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
{
struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
struct ipipe_domain *this_domain, *next_domain;
struct list_head *head, *pos;
int m_ack, s = -1;
......@@ -104,7 +99,6 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
* interrupt.
*/
m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
this_domain = ipipe_current_domain;
if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
......@@ -114,49 +108,28 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
next_domain = list_entry(head, struct ipipe_domain, p_link);
if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
s = __test_and_set_bit(IPIPE_STALL_FLAG,
&ipipe_root_cpudom_var(status));
next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
__ipipe_dispatch_wired(next_domain, irq);
goto finalize;
return;
goto out;
}
}
/* Ack the interrupt. */
pos = head;
while (pos != &__ipipe_pipeline) {
next_domain = list_entry(pos, struct ipipe_domain, p_link);
/*
* For each domain handling the incoming IRQ, mark it
* as pending in its log.
*/
if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
/*
* Domains that handle this IRQ are polled for
* acknowledging it by decreasing priority
* order. The interrupt must be made pending
* _first_ in the domain's status flags before
* the PIC is unlocked.
*/
__ipipe_set_irq_pending(next_domain, irq);
if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
m_ack = 1;
}
}
/*
* If the domain does not want the IRQ to be passed
* down the interrupt pipe, exit the loop now.
*/
if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
break;
pos = next_domain->p_link.next;
}
......@@ -166,18 +139,24 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
* immediately to the current domain if the interrupt has been
* marked as 'sticky'. This search does not go beyond the
* current domain in the pipeline. We also enforce the
* additional root stage lock (blackfin-specific). */
* additional root stage lock (blackfin-specific).
*/
if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
s = __test_and_set_bit(IPIPE_STALL_FLAG,
&ipipe_root_cpudom_var(status));
finalize:
/*
* If the interrupt preempted the head domain, then do not
* even try to walk the pipeline, unless an interrupt is
* pending for it.
*/
if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
ipipe_head_cpudom_var(irqpend_himask) == 0)
goto out;
__ipipe_walk_pipeline(head);
out:
if (!s)
__clear_bit(IPIPE_STALL_FLAG,
&ipipe_root_cpudom_var(status));
__clear_bit(IPIPE_STALL_FLAG, &p->status);
}
int __ipipe_check_root(void)
......@@ -187,7 +166,7 @@ int __ipipe_check_root(void)
void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
{
struct irq_desc *desc = irq_desc + irq;
struct irq_desc *desc = irq_to_desc(irq);
int prio = desc->ic_prio;
desc->depth = 0;
......@@ -199,7 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc);
void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
{
struct irq_desc *desc = irq_desc + irq;
struct irq_desc *desc = irq_to_desc(irq);
int prio = desc->ic_prio;
if (ipd != &ipipe_root &&
......@@ -236,15 +215,18 @@ int __ipipe_syscall_root(struct pt_regs *regs)
{
unsigned long flags;
/* We need to run the IRQ tail hook whenever we don't
/*
* We need to run the IRQ tail hook whenever we don't
* propagate a syscall to higher domains, because we know that
* important operations might be pending there (e.g. Xenomai
* deferred rescheduling). */
* deferred rescheduling).
*/
if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) {
if (regs->orig_p0 < NR_syscalls) {
void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
hook();
return 0;
if ((current->flags & PF_EVNOTIFY) == 0)
return 0;
}
/*
......@@ -312,112 +294,46 @@ int ipipe_trigger_irq(unsigned irq)
{
unsigned long flags;
#ifdef CONFIG_IPIPE_DEBUG
if (irq >= IPIPE_NR_IRQS ||
(ipipe_virtual_irq_p(irq)
&& !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
return -EINVAL;
#endif
local_irq_save_hw(flags);
__ipipe_handle_irq(irq, NULL);
local_irq_restore_hw(flags);
return 1;
}
/* Move Linux IRQ to threads. */
static int do_irqd(void *__desc)
asmlinkage void __ipipe_sync_root(void)
{
struct irq_desc *desc = __desc;
unsigned irq = desc - irq_desc;
int thrprio = desc->thr_prio;
int thrmask = 1 << thrprio;
int cpu = smp_processor_id();
cpumask_t cpumask;
sigfillset(&current->blocked);
current->flags |= PF_NOFREEZE;
cpumask = cpumask_of_cpu(cpu);
set_cpus_allowed(current, cpumask);
ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio);
while (!kthread_should_stop()) {
local_irq_disable();
if (!(desc->status & IRQ_SCHEDULED)) {
set_current_state(TASK_INTERRUPTIBLE);
resched:
local_irq_enable();
schedule();
local_irq_disable();
}
__set_current_state(TASK_RUNNING);
/*
* If higher priority interrupt servers are ready to
* run, reschedule immediately. We need this for the
* GPIO demux IRQ handler to unmask the interrupt line
* _last_, after all GPIO IRQs have run.
*/
if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1)))
goto resched;
if (--per_cpu(pending_irq_count[thrprio], cpu) == 0)
per_cpu(pending_irqthread_mask, cpu) &= ~thrmask;
desc->status &= ~IRQ_SCHEDULED;
desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs));
local_irq_enable();
}
__set_current_state(TASK_RUNNING);
return 0;
}
unsigned long flags;
static void kick_irqd(unsigned irq, void *cookie)
{
struct irq_desc *desc = irq_desc + irq;
int thrprio = desc->thr_prio;
int thrmask = 1 << thrprio;
int cpu = smp_processor_id();
if (!(desc->status & IRQ_SCHEDULED)) {
desc->status |= IRQ_SCHEDULED;
per_cpu(pending_irqthread_mask, cpu) |= thrmask;
++per_cpu(pending_irq_count[thrprio], cpu);
wake_up_process(desc->thread);
}
}
BUG_ON(irqs_disabled());
int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc)
{
if (desc->thread || !create_irq_threads)
return 0;
desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq);
if (desc->thread == NULL) {
printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq);
return -ENOMEM;
}
local_irq_save_hw(flags);
wake_up_process(desc->thread);
clear_thread_flag(TIF_IRQ_SYNC);
desc->thr_handler = ipipe_root_domain->irqs[irq].handler;
ipipe_root_domain->irqs[irq].handler = &kick_irqd;
if (ipipe_root_cpudom_var(irqpend_himask) != 0)
__ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
return 0;
local_irq_restore_hw(flags);
}
void __init ipipe_init_irq_threads(void)
void ___ipipe_sync_pipeline(unsigned long syncmask)
{
unsigned irq;
struct irq_desc *desc;
create_irq_threads = 1;
struct ipipe_domain *ipd = ipipe_current_domain;
for (irq = 0; irq < NR_IRQS; irq++) {
desc = irq_desc + irq;
if (desc->action != NULL ||
(desc->status & IRQ_NOREQUEST) != 0)
ipipe_start_irq_thread(irq, desc);
if (ipd == ipipe_root_domain) {
if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
return;
}
__ipipe_sync_stage(syncmask);
}
EXPORT_SYMBOL(show_stack);
......
arch/blackfin/kernel/irqchip.c
View file @ 78b020d0
......@@ -149,11 +149,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
#endif
generic_handle_irq(irq);
#ifndef CONFIG_IPIPE /* Useless and bugous over the I-pipe: IRQs are threaded. */
/* If we're the only interrupt running (ignoring IRQ15 which is for
syscalls), lower our priority to IRQ14 so that softirqs run at
that level. If there's another, lower-level interrupt, irq_exit
will defer softirqs to that. */
#ifndef CONFIG_IPIPE
/*
* If we're the only interrupt running (ignoring IRQ15 which
* is for syscalls), lower our priority to IRQ14 so that
* softirqs run at that level. If there's another,
* lower-level interrupt, irq_exit will defer softirqs to
* that. If the interrupt pipeline is enabled, we are already
* running at IRQ14 priority, so we don't need this code.
*/
CSYNC();
pending = bfin_read_IPEND() & ~0x8000;
other_ints = pending & (pending - 1);
......
arch/blackfin/kernel/kgdb_test.c
View file @ 78b020d0
......@@ -20,6 +20,7 @@
static char cmdline[256];
static unsigned long len;
#ifndef CONFIG_SMP
static int num1 __attribute__((l1_data));
void kgdb_l1_test(void) __attribute__((l1_text));
......@@ -32,6 +33,8 @@ void kgdb_l1_test(void)
printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
return ;
}
#endif
#if L2_LENGTH
static int num2 __attribute__((l2));
......@@ -59,10 +62,12 @@ int kgdb_test(char *name, int len, int count, int z)
static int test_proc_output(char *buf)
{
kgdb_test("hello world!", 12, 0x55, 0x10);
#ifndef CONFIG_SMP
kgdb_l1_test();
#if L2_LENGTH
#endif
#if L2_LENGTH
kgdb_l2_test();
#endif
#endif
return 0;
}
......
arch/blackfin/kernel/ptrace.c
View file @ 78b020d0
......@@ -45,6 +45,7 @@
#include <asm/asm-offsets.h>
#include <asm/dma.h>
#include <asm/fixed_code.h>
#include <asm/cacheflush.h>
#include <asm/mem_map.h>
#define TEXT_OFFSET 0
......@@ -240,7 +241,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
} else if (addr >= FIXED_CODE_START
&& addr + sizeof(tmp) <= FIXED_CODE_END) {
memcpy(&tmp, (const void *)(addr), sizeof(tmp));
copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
copied = sizeof(tmp);
} else
......@@ -320,7 +321,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
} else if (addr >= FIXED_CODE_START
&& addr + sizeof(data) <= FIXED_CODE_END) {
memcpy((void *)(addr), &data, sizeof(data));
copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
copied = sizeof(data);
} else
......
arch/blackfin/kernel/setup.c
View file @ 78b020d0
......@@ -889,6 +889,10 @@ void __init setup_arch(char **cmdline_p)
CPU, bfin_revid());
}
/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
panic("You can't run on this processor due to 05000448\n");
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
......@@ -1141,12 +1145,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
"%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
"%d KB(L1 dcache%s) %d KB(L2 cache)\n",
icache_size, dcache_size,
#if defined CONFIG_BFIN_WB
"wb"
"-wb"
#elif defined CONFIG_BFIN_WT
"wt"
"-wt"
#endif
"", 0);
......
arch/blackfin/kernel/time.c
View file @ 78b020d0
......@@ -134,7 +134,10 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
write_seqlock(&xtime_lock);
#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */
/*
* TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
* enabled.
*/
if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
#endif
do_timer(1);
......
arch/blackfin/mach-bf518/boards/ezbrd.c
View file @ 78b020d0
......@@ -113,7 +113,6 @@ static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
static struct dsa_platform_data ksz8893m_switch_data = {
......@@ -132,6 +131,7 @@ static struct platform_device ksz8893m_switch_device = {
.dev.platform_data = &ksz8893m_switch_data,
};
#endif
#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
......@@ -171,6 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
/* SPI SWITCH CHIP */
......@@ -179,10 +180,11 @@ static struct bfin5xx_spi_chip spi_switch_info = {
.bits_per_word = 8,
};
#endif
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
......@@ -259,6 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
{
......@@ -271,24 +274,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
......@@ -630,11 +624,10 @@ static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
&ksz8893m_switch_device,
#endif
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
......
arch/blackfin/mach-bf518/include/mach/anomaly.h
View file @ 78b020d0
......@@ -2,12 +2,12 @@
* File: include/asm-blackfin/mach-bf518/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
* - ????
* - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
......@@ -19,6 +19,8 @@
#define ANOMALY_05000122 (1)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
#define ANOMALY_05000254 (1)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
......@@ -53,6 +55,12 @@
#define ANOMALY_05000443 (1)
/* Incorrect L1 Instruction Bank B Memory Map Location */
#define ANOMALY_05000444 (1)
/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
#define ANOMALY_05000452 (1)
/* PWM_TRIPB Signal Not Available on PG10 */
#define ANOMALY_05000453 (1)
/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
#define ANOMALY_05000455 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
......@@ -65,15 +73,20 @@
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000278 (0)
#define ANOMALY_05000285 (0)
#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (0)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#endif
arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
View file @ 78b020d0
......@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART0_TX,
CH_UART0_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
......@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART1_TX,
CH_UART1_RX,
#endif
#ifdef CONFIG_BFIN_UART1_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
......
arch/blackfin/mach-bf527/boards/cm_bf527.c
View file @ 78b020d0
......@@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
......@@ -585,23 +585,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
......
arch/blackfin/mach-bf527/boards/ezbrd.c
View file @ 78b020d0
......@@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
......@@ -366,23 +366,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
......
arch/blackfin/mach-bf527/include/mach/anomaly.h
View file @ 78b020d0
......@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf527/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
......@@ -167,12 +167,16 @@
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000278 (0)
#define ANOMALY_05000285 (0)
#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#endif
arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
View file @ 78b020d0
......@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART0_TX,
CH_UART0_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
......@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART1_TX,
CH_UART1_RX,
#endif
#ifdef CONFIG_BFIN_UART1_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
......
arch/blackfin/mach-bf533/boards/Kconfig
View file @ 78b020d0
......@@ -38,9 +38,4 @@ config BFIN532_IP0X
help
Core support for IP04/IP04 open hardware IP-PBX.
config GENERIC_BF533_BOARD
bool "Generic"
help
Generic or Custom board support.
endchoice
arch/blackfin/mach-bf533/boards/Makefile
View file @ 78b020d0
......@@ -2,7 +2,6 @@
# arch/blackfin/mach-bf533/boards/Makefile
#
obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o
obj-$(CONFIG_BFIN533_STAMP) += stamp.o
obj-$(CONFIG_BFIN532_IP0X) += ip0x.o
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
......
arch/blackfin/mach-bf533/boards/blackstamp.c
View file @ 78b020d0
......@@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
......@@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc",
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
......
arch/blackfin/mach-bf533/boards/cm_bf533.c
View file @ 78b020d0
......@@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
......@@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc",
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
......
arch/blackfin/mach-bf533/boards/generic_board.c deleted 100644 → 0
View file @ bf5172d0
/*
* File: arch/blackfin/mach-bf533/generic_board.c
* Based on: arch/blackfin/mach-bf533/ezkit.c
* Author: Aidan Williams <aidan@nicta.com.au>
*
* Created: 2005
* Description:
*
* Modified:
* Copyright 2005 National ICT Australia (NICTA)
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
/*
* Name the Board for the /proc/cpuinfo
*/
const char bfin_board_name[] = "UNKNOWN BOARD";
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
/*
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
static struct resource smc91x_resources[] = {
{
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX+1,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device bfin_sir0_device = {
.name = "bfin_sir",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_sir0_resources),
.resource = bfin_sir0_resources,
};
#endif
#endif
static struct platform_device *generic_board_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
};
static int __init generic_board_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
}
arch_initcall(generic_board_init);
arch/blackfin/mach-bf533/boards/ip0x.c
View file @ 78b020d0
......@@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = {
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
/*
* CPOL (Clock Polarity)
* 0 - Active high SCK
......@@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
/* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc",
.modalias = "mmc_spi",
.max_speed_hz = 2,
.bus_num = 1,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
},
#endif
};
......
arch/blackfin/mach-bf533/include/mach/anomaly.h
View file @ 78b020d0
......@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf533/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
......@@ -160,7 +160,7 @@
#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
......@@ -278,9 +278,12 @@
#define ANOMALY_05000266 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#endif
arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
View file @ 78b020d0
......@@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART_TX,
CH_UART_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
......
arch/blackfin/mach-bf537/boards/Kconfig
View file @ 78b020d0
......@@ -33,9 +33,4 @@ config CAMSIG_MINOTAUR
help
Board supply package for CSP Minotaur
config GENERIC_BF537_BOARD
bool "Generic"
help
Generic or Custom board support.
endchoice
arch/blackfin/mach-bf537/boards/Makefile
View file @ 78b020d0
......@@ -2,7 +2,6 @@
# arch/blackfin/mach-bf537/boards/Makefile
#
obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o
......
arch/blackfin/mach-bf537/boards/cm_bf537.c
View file @ 78b020d0
......@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
......@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 7,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 1,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
......
arch/blackfin/mach-bf537/boards/generic_board.c deleted 100644 → 0
View file @ bf5172d0
This diff is collapsed.
arch/blackfin/mach-bf537/boards/minotaur.c
View file @ 78b020d0
......@@ -134,9 +134,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
......@@ -156,23 +156,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.modalias = "mmc_spi",
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
......
arch/blackfin/mach-bf537/boards/pnav10.c
View file @ 78b020d0
......@@ -289,9 +289,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
......@@ -364,23 +364,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 7,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc",
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
......
arch/blackfin/mach-bf537/boards/tcm_bf537.c
View file @ 78b020d0
......@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
......@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 7,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc",
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
......
arch/blackfin/mach-bf537/include/mach/anomaly.h
View file @ 78b020d0
......@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf537/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
......@@ -110,7 +110,7 @@
#define ANOMALY_05000301 (1)
/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
#define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
......@@ -168,9 +168,12 @@
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#endif
arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
View file @ 78b020d0
......@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART0_TX,
CH_UART0_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
......@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART1_TX,
CH_UART1_RX,
#endif
#ifdef CONFIG_BFIN_UART1_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
......
arch/blackfin/mach-bf538/include/mach/anomaly.h
View file @ 78b020d0
......@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf538/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
......@@ -120,13 +120,17 @@
#define ANOMALY_05000198 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000305 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#endif
arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
View file @ 78b020d0
......@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART0_TX,
CH_UART0_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
......@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART1_TX,
CH_UART1_RX,
#endif
#ifdef CONFIG_BFIN_UART1_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
......
arch/blackfin/mach-bf548/include/mach/anomaly.h
View file @ 78b020d0
......@@ -2,12 +2,12 @@
* File: include/asm-blackfin/mach-bf548/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
* - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
* - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
......@@ -91,8 +91,6 @@
#define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
/* USB DP/DM Data Pins May Lose State When Entering Hibernate */
#define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
/* Mobile DDR Operation Not Functional */
#define ANOMALY_05000377 (1)
/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
#define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
/* 16-Bit NAND FLASH Boot Mode Is Not Functional */
......@@ -157,8 +155,22 @@
#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
/* Software System Reset Corrupts PLL_LOCKCNT Register */
#define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
/* OTP Write Accesses Not Supported */
#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
#define ANOMALY_05000446 (1)
/* UART IrDA Receiver Fails on Extended Bit Pulses */
#define ANOMALY_05000447 (1)
/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
/* USB DMA Mode 1 Short Packet Data Corruption */
#define ANOMALY_05000450 (1
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
......@@ -171,6 +183,8 @@
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000278 (0)
#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
......
arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
View file @ 78b020d0
......@@ -63,7 +63,7 @@
#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
......@@ -74,12 +74,12 @@
# define CONFIG_UART0_RTS_PIN -1
# endif
# ifndef CONFIG_UART1_CTS_PIN
# define CONFIG_UART1_CTS_PIN -1
# ifndef CONFIG_UART2_CTS_PIN
# define CONFIG_UART2_CTS_PIN -1
# endif
# ifndef CONFIG_UART1_RTS_PIN
# define CONFIG_UART1_RTS_PIN -1
# ifndef CONFIG_UART2_RTS_PIN
# define CONFIG_UART2_RTS_PIN -1
# endif
#endif
......@@ -130,7 +130,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART0_TX,
CH_UART0_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
......@@ -143,6 +143,10 @@ struct bfin_serial_res bfin_serial_resource[] = {
#ifdef CONFIG_SERIAL_BFIN_DMA
CH_UART1_TX,
CH_UART1_RX,
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
0,
0,
#endif
},
#endif
......@@ -154,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART2_TX,
CH_UART2_RX,
#endif
#ifdef CONFIG_BFIN_UART2_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART2_CTS_PIN,
CONFIG_UART2_RTS_PIN,
#endif
......@@ -167,6 +171,10 @@ struct bfin_serial_res bfin_serial_resource[] = {
#ifdef CONFIG_SERIAL_BFIN_DMA
CH_UART3_TX,
CH_UART3_RX,
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
0,
0,
#endif
},
#endif
......
arch/blackfin/mach-bf548/include/mach/irq.h
View file @ 78b020d0
......@@ -123,8 +123,8 @@ Events (highest priority) EMU 0
#define IRQ_MXVR_ERROR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */
#define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */
#define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */
#define IRQ_EPP1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
#define IRQ_EPP2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
#define IRQ_EPPI1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
#define IRQ_EPPI2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
#define IRQ_UART3_ERROR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */
#define IRQ_HOST_ERROR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */
#define IRQ_PIXC_ERROR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */
......@@ -361,8 +361,8 @@ Events (highest priority) EMU 0
#define IRQ_UART2_ERR IRQ_UART2_ERROR
#define IRQ_CAN0_ERR IRQ_CAN0_ERROR
#define IRQ_MXVR_ERR IRQ_MXVR_ERROR
#define IRQ_EPP1_ERR IRQ_EPP1_ERROR
#define IRQ_EPP2_ERR IRQ_EPP2_ERROR
#define IRQ_EPPI1_ERR IRQ_EPPI1_ERROR
#define IRQ_EPPI2_ERR IRQ_EPPI2_ERROR
#define IRQ_UART3_ERR IRQ_UART3_ERROR
#define IRQ_HOST_ERR IRQ_HOST_ERROR
#define IRQ_PIXC_ERR IRQ_PIXC_ERROR
......
arch/blackfin/mach-bf561/boards/Kconfig
View file @ 78b020d0
......@@ -19,9 +19,4 @@ config BFIN561_BLUETECHNIX_CM
help
CM-BF561 support for EVAL- and DEV-Board.
config GENERIC_BF561_BOARD
bool "Generic"
help
Generic or Custom board support.
endchoice
arch/blackfin/mach-bf561/boards/Makefile
View file @ 78b020d0
......@@ -2,7 +2,6 @@
# arch/blackfin/mach-bf561/boards/Makefile
#
obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o
obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN561_TEPLA) += tepla.o
arch/blackfin/mach-bf561/boards/cm_bf561.c
View file @ 78b020d0
......@@ -105,9 +105,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
......@@ -155,14 +155,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc",
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
......
arch/blackfin/mach-bf561/boards/generic_board.c deleted 100644 → 0
View file @ bf5172d0
/*
* File: arch/blackfin/mach-bf561/generic_board.c
* Based on: arch/blackfin/mach-bf533/ezkit.c
* Author: Aidan Williams <aidan@nicta.com.au>
*
* Created:
* Description:
*
* Modified:
* Copyright 2005 National ICT Australia (NICTA)
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
const char bfin_board_name[] = "UNKNOWN BOARD";
/*
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
static struct resource smc91x_resources[] = {
{
.start = 0x2C010300,
.end = 0x2C010300 + 16,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}, {
.start = IRQ_PF9,
.end = IRQ_PF9,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX+1,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device bfin_sir0_device = {
.name = "bfin_sir",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_sir0_resources),
.resource = bfin_sir0_resources,
};
#endif
#endif
static struct platform_device *generic_board_devices[] __initdata = {
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
};
static int __init generic_board_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
return platform_add_devices(generic_board_devices,
ARRAY_SIZE(generic_board_devices));
}
arch_initcall(generic_board_init);
arch/blackfin/mach-bf561/include/mach/anomaly.h
View file @ 78b020d0
......@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf561/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
......@@ -224,7 +224,7 @@
#define ANOMALY_05000301 (1)
/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (1)
/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
......@@ -283,8 +283,11 @@
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#endif
arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
View file @ 78b020d0
......@@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART_TX,
CH_UART_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
......
arch/blackfin/mach-common/arch_checks.c
View file @ 78b020d0
......@@ -62,3 +62,12 @@
#if (CONFIG_BOOT_LOAD & 0x3)
# error "The kernel load address must be 4 byte aligned"
#endif
/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
# error "The kernel load address is too high; keep it below 10meg for safety"
#endif
#if ANOMALY_05000448
# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
#endif
arch/blackfin/mach-common/cache.S
View file @ 78b020d0
......@@ -66,11 +66,33 @@
/* Invalidate all instruction cache lines assocoiated with this memory area */
ENTRY(_blackfin_icache_flush_range)
/*
* Walkaround to avoid loading wrong instruction after invalidating icache
* and following sequence is met.
*
* 1) One instruction address is cached in the instruction cache.
* 2) This instruction in SDRAM is changed.
* 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
* 4) This instruction is executed again, but the old one is loaded.
*/
P0 = R0;
IFLUSH[P0];
do_flush IFLUSH, , nop
ENDPROC(_blackfin_icache_flush_range)
/* Flush all cache lines assocoiated with this area of memory. */
ENTRY(_blackfin_icache_dcache_flush_range)
/*
* Walkaround to avoid loading wrong instruction after invalidating icache
* and following sequence is met.
*
* 1) One instruction address is cached in the instruction cache.
* 2) This instruction in SDRAM is changed.
* 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
* 4) This instruction is executed again, but the old one is loaded.
*/
P0 = R0;
IFLUSH[P0];
do_flush FLUSH, IFLUSH
ENDPROC(_blackfin_icache_dcache_flush_range)
......
arch/blackfin/mach-common/clocks-init.c
View file @ 78b020d0
......@@ -17,7 +17,7 @@
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
(PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
(PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
__attribute__((l1_text))
static void do_sync(void)
......
arch/blackfin/mach-common/dpmc_modes.S
View file @ 78b020d0
......@@ -376,10 +376,22 @@ ENTRY(_do_hibernate)
#endif
#ifdef PINT0_ASSIGN
PM_SYS_PUSH(PINT0_MASK_SET)
PM_SYS_PUSH(PINT1_MASK_SET)
PM_SYS_PUSH(PINT2_MASK_SET)
PM_SYS_PUSH(PINT3_MASK_SET)
PM_SYS_PUSH(PINT0_ASSIGN)
PM_SYS_PUSH(PINT1_ASSIGN)
PM_SYS_PUSH(PINT2_ASSIGN)
PM_SYS_PUSH(PINT3_ASSIGN)
PM_SYS_PUSH(PINT0_INVERT_SET)
PM_SYS_PUSH(PINT1_INVERT_SET)
PM_SYS_PUSH(PINT2_INVERT_SET)
PM_SYS_PUSH(PINT3_INVERT_SET)
PM_SYS_PUSH(PINT0_EDGE_SET)
PM_SYS_PUSH(PINT1_EDGE_SET)
PM_SYS_PUSH(PINT2_EDGE_SET)
PM_SYS_PUSH(PINT3_EDGE_SET)
#endif
PM_SYS_PUSH(EBIU_AMBCTL0)
......@@ -714,10 +726,22 @@ ENTRY(_do_hibernate)
PM_SYS_POP(EBIU_AMBCTL0)
#ifdef PINT0_ASSIGN
PM_SYS_POP(PINT3_EDGE_SET)
PM_SYS_POP(PINT2_EDGE_SET)
PM_SYS_POP(PINT1_EDGE_SET)
PM_SYS_POP(PINT0_EDGE_SET)
PM_SYS_POP(PINT3_INVERT_SET)
PM_SYS_POP(PINT2_INVERT_SET)
PM_SYS_POP(PINT1_INVERT_SET)
PM_SYS_POP(PINT0_INVERT_SET)
PM_SYS_POP(PINT3_ASSIGN)
PM_SYS_POP(PINT2_ASSIGN)
PM_SYS_POP(PINT1_ASSIGN)
PM_SYS_POP(PINT0_ASSIGN)
PM_SYS_POP(PINT3_MASK_SET)
PM_SYS_POP(PINT2_MASK_SET)
PM_SYS_POP(PINT1_MASK_SET)
PM_SYS_POP(PINT0_MASK_SET)
#endif
#ifdef SICA_IWR1
......
arch/blackfin/mach-common/entry.S
View file @ 78b020d0
......@@ -600,6 +600,19 @@ ENTRY(_system_call)
p2 = [p2];
[p2+(TASK_THREAD+THREAD_KSP)] = sp;
#ifdef CONFIG_IPIPE
r0 = sp;
SP += -12;
call ___ipipe_syscall_root;
SP += 12;
cc = r0 == 1;
if cc jump .Lsyscall_really_exit;
cc = r0 == -1;
if cc jump .Lresume_userspace;
r3 = [sp + PT_R3];
r4 = [sp + PT_R4];
p0 = [sp + PT_ORIG_P0];
#endif /* CONFIG_IPIPE */
/* Check the System Call */
r7 = __NR_syscall;
......@@ -654,6 +667,17 @@ ENTRY(_system_call)
r7 = r7 & r4;
.Lsyscall_resched:
#ifdef CONFIG_IPIPE
cc = BITTST(r7, TIF_IRQ_SYNC);
if !cc jump .Lsyscall_no_irqsync;
[--sp] = reti;
r0 = [sp++];
SP += -12;
call ___ipipe_sync_root;
SP += 12;
jump .Lresume_userspace_1;
.Lsyscall_no_irqsync:
#endif
cc = BITTST(r7, TIF_NEED_RESCHED);
if !cc jump .Lsyscall_sigpending;
......@@ -685,6 +709,10 @@ ENTRY(_system_call)
.Lsyscall_really_exit:
r5 = [sp + PT_RESERVED];
rets = r5;
#ifdef CONFIG_IPIPE
[--sp] = reti;
r5 = [sp++];
#endif /* CONFIG_IPIPE */
rts;
ENDPROC(_system_call)
......@@ -771,6 +799,15 @@ _new_old_task:
ENDPROC(_resume)
ENTRY(_ret_from_exception)
#ifdef CONFIG_IPIPE
[--sp] = rets;
SP += -12;
call ___ipipe_check_root
SP += 12
rets = [sp++];
cc = r0 == 0;
if cc jump 4f; /* not on behalf of Linux, get out */
#endif /* CONFIG_IPIPE */
p2.l = lo(IPEND);
p2.h = hi(IPEND);
......@@ -827,6 +864,28 @@ ENTRY(_ret_from_exception)
rts;
ENDPROC(_ret_from_exception)
#ifdef CONFIG_IPIPE
_sync_root_irqs:
[--sp] = reti; /* Reenable interrupts */
r0 = [sp++];
jump.l ___ipipe_sync_root
_resume_kernel_from_int:
r0.l = _sync_root_irqs
r0.h = _sync_root_irqs
[--sp] = rets;
[--sp] = ( r7:4, p5:3 );
SP += -12;
call ___ipipe_call_irqtail
SP += 12;
( r7:4, p5:3 ) = [sp++];
rets = [sp++];
rts
#else
#define _resume_kernel_from_int 2f
#endif
ENTRY(_return_from_int)
/* If someone else already raised IRQ 15, do nothing. */
csync;
......@@ -848,7 +907,7 @@ ENTRY(_return_from_int)
r1 = r0 - r1;
r2 = r0 & r1;
cc = r2 == 0;
if !cc jump 2f;
if !cc jump _resume_kernel_from_int;
/* Lower the interrupt level to 15. */
p0.l = lo(EVT15);
......
arch/blackfin/mach-common/interrupt.S
View file @ 78b020d0
......@@ -235,6 +235,7 @@ ENDPROC(_evt_system_call)
#ifdef CONFIG_IPIPE
ENTRY(___ipipe_call_irqtail)
p0 = r0;
r0.l = 1f;
r0.h = 1f;
reti = r0;
......@@ -242,9 +243,6 @@ ENTRY(___ipipe_call_irqtail)
1:
[--sp] = rets;
[--sp] = ( r7:4, p5:3 );
p0.l = ___ipipe_irq_tail_hook;
p0.h = ___ipipe_irq_tail_hook;
p0 = [p0];
sp += -12;
call (p0);
sp += 12;
......@@ -259,7 +257,7 @@ ENTRY(___ipipe_call_irqtail)
p0.h = hi(EVT14);
[p0] = r0;
csync;
r0 = 0x401f;
r0 = 0x401f (z);
sti r0;
raise 14;
[--sp] = reti; /* IRQs on. */
......@@ -277,11 +275,7 @@ ENTRY(___ipipe_call_irqtail)
p0.h = _bfin_irq_flags;
r0 = [p0];
sti r0;
#if 0 /* FIXME: this actually raises scheduling latencies */
/* Reenable interrupts */
[--sp] = reti;
r0 = [sp++];
#endif
rts;
ENDPROC(___ipipe_call_irqtail)
#endif /* CONFIG_IPIPE */
arch/blackfin/mach-common/ints-priority.c
View file @ 78b020d0
......@@ -161,11 +161,15 @@ static void bfin_core_unmask_irq(unsigned int irq)
static void bfin_internal_mask_irq(unsigned int irq)
{
unsigned long flags;
#ifdef CONFIG_BF53x
local_irq_save_hw(flags);
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
~(1 << SIC_SYSIRQ(irq)));
#else
unsigned mask_bank, mask_bit;
local_irq_save_hw(flags);
mask_bank = SIC_SYSIRQ(irq) / 32;
mask_bit = SIC_SYSIRQ(irq) % 32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
......@@ -175,15 +179,20 @@ static void bfin_internal_mask_irq(unsigned int irq)
~(1 << mask_bit));
#endif
#endif
local_irq_restore_hw(flags);
}
static void bfin_internal_unmask_irq(unsigned int irq)
{
unsigned long flags;
#ifdef CONFIG_BF53x
local_irq_save_hw(flags);
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
(1 << SIC_SYSIRQ(irq)));
#else
unsigned mask_bank, mask_bit;
local_irq_save_hw(flags);
mask_bank = SIC_SYSIRQ(irq) / 32;
mask_bit = SIC_SYSIRQ(irq) % 32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
......@@ -193,6 +202,7 @@ static void bfin_internal_unmask_irq(unsigned int irq)
(1 << mask_bit));
#endif
#endif
local_irq_restore_hw(flags);
}
#ifdef CONFIG_PM
......@@ -390,7 +400,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq,
static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
{
#ifdef CONFIG_IPIPE
_set_irq_handler(irq, handle_edge_irq);
_set_irq_handler(irq, handle_level_irq);
#else
struct irq_desc *desc = irq_desc + irq;
/* May not call generic set_irq_handler() due to spinlock
......@@ -1055,13 +1065,18 @@ int __init init_arch_irq(void)
#endif
default:
#ifdef CONFIG_IPIPE
/*
* We want internal interrupt sources to be masked, because
* ISRs may trigger interrupts recursively (e.g. DMA), but
* interrupts are _not_ masked at CPU level. So let's handle
* them as level interrupts.
*/
set_irq_handler(irq, handle_level_irq);
/*
* We want internal interrupt sources to be
* masked, because ISRs may trigger interrupts
* recursively (e.g. DMA), but interrupts are
* _not_ masked at CPU level. So let's handle
* most of them as level interrupts, except
* the timer interrupt which is special.
*/
if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
set_irq_handler(irq, handle_simple_irq);
else
set_irq_handler(irq, handle_level_irq);
#else /* !CONFIG_IPIPE */
set_irq_handler(irq, handle_simple_irq);
#endif /* !CONFIG_IPIPE */
......@@ -1123,9 +1138,8 @@ int __init init_arch_irq(void)
#ifdef CONFIG_IPIPE
for (irq = 0; irq < NR_IRQS; irq++) {
struct irq_desc *desc = irq_desc + irq;
struct irq_desc *desc = irq_to_desc(irq);
desc->ic_prio = __ipipe_get_irq_priority(irq);
desc->thr_prio = __ipipe_get_irqthread_priority(irq);
}
#endif /* CONFIG_IPIPE */
......@@ -1208,76 +1222,21 @@ int __ipipe_get_irq_priority(unsigned irq)
return IVG15;
}
int __ipipe_get_irqthread_priority(unsigned irq)
{
int ient, prio;
int demux_irq;
/* The returned priority value is rescaled to [0..IVG13+1]
* with 0 being the lowest effective priority level. */
if (irq <= IRQ_CORETMR)
return IVG13 - irq + 1;
/* GPIO IRQs are given the priority of the demux
* interrupt. */
if (IS_GPIOIRQ(irq)) {
#if defined(CONFIG_BF54x)
u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]);
demux_irq = (bank == 0 ? IRQ_PINT0 :
bank == 1 ? IRQ_PINT1 :
bank == 2 ? IRQ_PINT2 :
IRQ_PINT3);
#elif defined(CONFIG_BF561)
demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA :
irq >= IRQ_PF16 ? IRQ_PROG1_INTA :
IRQ_PROG0_INTA);
#elif defined(CONFIG_BF52x)
demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA :
irq >= IRQ_PG0 ? IRQ_PORTG_INTA :
IRQ_PORTF_INTA);
#else
demux_irq = irq;
#endif
return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1;
}
/* The GPIO demux interrupt is given a lower priority
* than the GPIO IRQs, so that its threaded handler
* unmasks the interrupt line after the decoded IRQs
* have been processed. */
prio = PRIO_GPIODEMUX(irq);
/* demux irq? */
if (prio != -1)
return IVG13 - prio;
for (ient = 0; ient < NR_PERI_INTS; ient++) {
struct ivgx *ivg = ivg_table + ient;
if (ivg->irqno == irq) {
for (prio = 0; prio <= IVG13-IVG7; prio++) {
if (ivg7_13[prio].ifirst <= ivg &&
ivg7_13[prio].istop > ivg)
return IVG7 - prio;
}
}
}
return 0;
}
/* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
#ifdef CONFIG_DO_IRQ_L1
__attribute__((l1_text))
#endif
asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
{
struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
struct ipipe_domain *this_domain = ipipe_current_domain;
struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
int irq;
int irq, s;
if (likely(vec == EVT_IVTMR_P)) {
irq = IRQ_CORETMR;
goto handle_irq;
goto core_tick;
}
SSYNC();
......@@ -1319,24 +1278,39 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
irq = ivg->irqno;
if (irq == IRQ_SYSTMR) {
#ifdef CONFIG_GENERIC_CLOCKEVENTS
core_tick:
#else
bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
#endif
/* This is basically what we need from the register frame. */
__raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend;
__raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc;
if (!ipipe_root_domain_p)
__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
else
if (this_domain != ipipe_root_domain)
__raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
else
__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
}
handle_irq:
#ifndef CONFIG_GENERIC_CLOCKEVENTS
core_tick:
#endif
if (this_domain == ipipe_root_domain) {
s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
barrier();
}
ipipe_trace_irq_entry(irq);
__ipipe_handle_irq(irq, regs);
ipipe_trace_irq_exit(irq);
ipipe_trace_irq_exit(irq);
if (ipipe_root_domain_p)
return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
if (this_domain == ipipe_root_domain) {
set_thread_flag(TIF_IRQ_SYNC);
if (!s) {
__clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
return !test_bit(IPIPE_STALL_FLAG, &p->status);
}
}
return 0;
}
......
arch/blackfin/mach-common/smp.c
View file @ 78b020d0
......@@ -158,10 +158,14 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
kfree(msg);
break;
case BFIN_IPI_CALL_FUNC:
spin_unlock(&msg_queue->lock);
ipi_call_function(cpu, msg);
spin_lock(&msg_queue->lock);
break;
case BFIN_IPI_CPU_STOP:
spin_unlock(&msg_queue->lock);
ipi_cpu_stop(cpu);
spin_lock(&msg_queue->lock);
kfree(msg);
break;
default:
......@@ -457,7 +461,7 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end)
smp_flush_data.start = start;
smp_flush_data.end = end;
if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
}
EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
......
arch/blackfin/mm/init.c
View file @ 78b020d0
......@@ -104,7 +104,7 @@ void __init paging_init(void)
}
}
asmlinkage void init_pda(void)
asmlinkage void __init init_pda(void)
{
unsigned int cpu = raw_smp_processor_id();
......
arch/ia64/sn/pci/pcibr/pcibr_dma.c
View file @ 78b020d0
......@@ -135,11 +135,10 @@ pcibr_dmatrans_direct64(struct pcidev_info * info, u64 paddr,
if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
pci_addr = IS_PIC_SOFT(pcibus_info) ?
PHYS_TO_DMA(paddr) :
PHYS_TO_TIODMA(paddr) | dma_attributes;
PHYS_TO_TIODMA(paddr);
else
pci_addr = IS_PIC_SOFT(pcibus_info) ?
paddr :
paddr | dma_attributes;
pci_addr = paddr;
pci_addr |= dma_attributes;
/* Handle Bus mode */
if (IS_PCIX(pcibus_info))
......
arch/m68knommu/platform/5206e/config.c
View file @ 78b020d0
......@@ -17,6 +17,7 @@
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfdma.h>
#include <asm/mcfuart.h>
/***************************************************************************/
......
arch/m68knommu/platform/528x/config.c
View file @ 78b020d0
......@@ -24,7 +24,6 @@
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
#ifdef CONFIG_MTD_PARTITIONS
#include <linux/mtd/partitions.h>
......@@ -33,233 +32,6 @@
/***************************************************************************/
void coldfire_reset(void);
static void coldfire_qspi_cs_control(u8 cs, u8 command);
/***************************************************************************/
#if defined(CONFIG_SPI)
#if defined(CONFIG_WILDFIRE)
#define SPI_NUM_CHIPSELECTS 0x02
#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */
#define SPI_CS_MASK 0x18
#define FLASH_BLOCKSIZE (1024*64)
#define FLASH_NUMBLOCKS 16
#define FLASH_TYPE "m25p80"
#define M25P80_CS 0
#define MMC_CS 1
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition stm25p_partitions[] = {
/* sflash */
[0] = {
.name = "stm25p80",
.offset = 0x00000000,
.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
.mask_flags = 0
}
};
#endif
#elif defined(CONFIG_WILDFIREMOD)
#define SPI_NUM_CHIPSELECTS 0x08
#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */
#define SPI_CS_MASK 0x78
#define FLASH_BLOCKSIZE (1024*64)
#define FLASH_NUMBLOCKS 64
#define FLASH_TYPE "m25p32"
/* Reserve 1M for the kernel parition */
#define FLASH_KERNEL_SIZE (1024 * 1024)
#define M25P80_CS 5
#define MMC_CS 6
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition stm25p_partitions[] = {
/* sflash */
[0] = {
.name = "kernel",
.offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
.size = FLASH_KERNEL_SIZE,
.mask_flags = 0
},
[1] = {
.name = "image",
.offset = 0x00000000,
.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
.mask_flags = 0
},
[2] = {
.name = "all",
.offset = 0x00000000,
.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
.mask_flags = 0
}
};
#endif
#else
#define SPI_NUM_CHIPSELECTS 0x04
#define SPI_PAR_VAL 0x7F /* Enable DIN, DOUT, CLK, CS0 - CS4 */
#endif
#ifdef MMC_CS
static struct coldfire_spi_chip flash_chip_info = {
.mode = SPI_MODE_0,
.bits_per_word = 16,
.del_cs_to_clk = 17,
.del_after_trans = 1,
.void_write_data = 0
};
static struct coldfire_spi_chip mmc_chip_info = {
.mode = SPI_MODE_0,
.bits_per_word = 16,
.del_cs_to_clk = 17,
.del_after_trans = 1,
.void_write_data = 0xFFFF
};
#endif
#ifdef M25P80_CS
static struct flash_platform_data stm25p80_platform_data = {
.name = "ST M25P80 SPI Flash chip",
#ifdef CONFIG_MTD_PARTITIONS
.parts = stm25p_partitions,
.nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
#endif
.type = FLASH_TYPE
};
#endif
static struct spi_board_info spi_board_info[] __initdata = {
#ifdef M25P80_CS
{
.modalias = "m25p80",
.max_speed_hz = 16000000,
.bus_num = 1,
.chip_select = M25P80_CS,
.platform_data = &stm25p80_platform_data,
.controller_data = &flash_chip_info
},
#endif
#ifdef MMC_CS
{
.modalias = "mmc_spi",
.max_speed_hz = 16000000,
.bus_num = 1,
.chip_select = MMC_CS,
.controller_data = &mmc_chip_info
}
#endif
};
static struct coldfire_spi_master coldfire_master_info = {
.bus_num = 1,
.num_chipselect = SPI_NUM_CHIPSELECTS,
.irq_source = MCF5282_QSPI_IRQ_SOURCE,
.irq_vector = MCF5282_QSPI_IRQ_VECTOR,
.irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
.irq_lp = 0x2B, /* Level 5 and Priority 3 */
.par_val = SPI_PAR_VAL,
.cs_control = coldfire_qspi_cs_control,
};
static struct resource coldfire_spi_resources[] = {
[0] = {
.name = "qspi-par",
.start = MCF5282_QSPI_PAR,
.end = MCF5282_QSPI_PAR,
.flags = IORESOURCE_MEM
},
[1] = {
.name = "qspi-module",
.start = MCF5282_QSPI_QMR,
.end = MCF5282_QSPI_QMR + 0x18,
.flags = IORESOURCE_MEM
},
[2] = {
.name = "qspi-int-level",
.start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
.end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
.flags = IORESOURCE_MEM
},
[3] = {
.name = "qspi-int-mask",
.start = MCF5282_INTC0 + MCFINTC_IMRL,
.end = MCF5282_INTC0 + MCFINTC_IMRL,
.flags = IORESOURCE_MEM
}
};
static struct platform_device coldfire_spi = {
.name = "spi_coldfire",
.id = -1,
.resource = coldfire_spi_resources,
.num_resources = ARRAY_SIZE(coldfire_spi_resources),
.dev = {
.platform_data = &coldfire_master_info,
}
};
static void coldfire_qspi_cs_control(u8 cs, u8 command)
{
u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
#if defined(CONFIG_WILDFIRE)
u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
#endif
#if defined(CONFIG_WILDFIREMOD)
u8 cs_mask = (cs << 3) & SPI_CS_MASK;
#endif
/*
* Don't do anything if the chip select is not
* one of the port qs pins.
*/
if (command & QSPI_CS_INIT) {
#if defined(CONFIG_WILDFIRE)
MCF5282_GPIO_DDRQS |= cs_bit;
MCF5282_GPIO_PQSPAR &= ~cs_bit;
#endif
#if defined(CONFIG_WILDFIREMOD)
MCF5282_GPIO_DDRQS |= SPI_CS_MASK;
MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
#endif
}
if (command & QSPI_CS_ASSERT) {
MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
MCF5282_GPIO_PORTQS |= cs_mask;
} else if (command & QSPI_CS_DROP) {
MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
}
}
static int __init spi_dev_init(void)
{
int retval;
retval = platform_device_register(&coldfire_spi);
if (retval < 0)
return retval;
if (ARRAY_SIZE(spi_board_info))
retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
return retval;
}
#endif /* CONFIG_SPI */
/***************************************************************************/
......
arch/mips/include/asm/compat.h
View file @ 78b020d0
......@@ -3,6 +3,8 @@
/*
* Architecture specific compatibility types
*/
#include <linux/seccomp.h>
#include <linux/thread_info.h>
#include <linux/types.h>
#include <asm/page.h>
#include <asm/ptrace.h>
......@@ -218,4 +220,9 @@ struct compat_shmid64_ds {
compat_ulong_t __unused2;
};
static inline int is_compat_task(void)
{
return test_thread_flag(TIF_32BIT);
}
#endif /* _ASM_COMPAT_H */
arch/powerpc/platforms/86xx/gef_sbc610.c
View file @ 78b020d0
......@@ -142,6 +142,10 @@ static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
/* Do not do the fixup on other platforms! */
if (!machine_is(gef_sbc610))
return;
printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
/* Ensure ports 1, 2, 3, 4 & 5 are enabled */
......
arch/s390/crypto/aes_s390.c
View file @ 78b020d0
......@@ -556,7 +556,7 @@ static void __exit aes_s390_fini(void)
module_init(aes_s390_init);
module_exit(aes_s390_fini);
MODULE_ALIAS("aes");
MODULE_ALIAS("aes-all");
MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
MODULE_LICENSE("GPL");
arch/sh/boards/board-ap325rxa.c
View file @ 78b020d0
......@@ -22,6 +22,7 @@
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
#include <media/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
......
arch/x86/Kconfig
View file @ 78b020d0
......@@ -138,6 +138,9 @@ config ARCH_HAS_CACHE_LINE_SIZE
config HAVE_SETUP_PER_CPU_AREA
def_bool y
config HAVE_DYNAMIC_PER_CPU_AREA
def_bool y
config HAVE_CPUMASK_OF_CPU_MAP
def_bool X86_64_SMP
......@@ -780,6 +783,11 @@ config X86_MCE_AMD
Additional support for AMD specific MCE features such as
the DRAM Error Threshold.
config X86_MCE_THRESHOLD
depends on X86_MCE_AMD || X86_MCE_INTEL
bool
default y
config X86_MCE_NONFATAL
tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
depends on X86_32 && X86_MCE
......@@ -1125,7 +1133,7 @@ config NODES_SHIFT
Specify the maximum number of NUMA Nodes available on the target
system. Increases memory reserved to accomodate various tables.
config HAVE_ARCH_BOOTMEM_NODE
config HAVE_ARCH_BOOTMEM
def_bool y
depends on X86_32 && NUMA
......@@ -1423,7 +1431,7 @@ config CRASH_DUMP
config KEXEC_JUMP
bool "kexec jump (EXPERIMENTAL)"
depends on EXPERIMENTAL
depends on KEXEC && HIBERNATION && X86_32
depends on KEXEC && HIBERNATION
---help---
Jump between original kernel and kexeced kernel and invoke
code in physical address mode via KEXEC
......
arch/x86/include/asm/apic.h
View file @ 78b020d0
......@@ -379,6 +379,7 @@ static inline u32 safe_apic_wait_icr_idle(void)
static inline void ack_APIC_irq(void)
{
#ifdef CONFIG_X86_LOCAL_APIC
/*
* ack_APIC_irq() actually gets compiled as a single instruction
* ... yummie.
......@@ -386,6 +387,7 @@ static inline void ack_APIC_irq(void)
/* Docs say use 0 for future compatibility */
apic_write(APIC_EOI, 0);
#endif
}
static inline unsigned default_get_apic_id(unsigned long x)
......
arch/x86/include/asm/apicdef.h
View file @ 78b020d0
......@@ -53,6 +53,7 @@
#define APIC_ESR_SENDILL 0x00020
#define APIC_ESR_RECVILL 0x00040
#define APIC_ESR_ILLREGA 0x00080
#define APIC_LVTCMCI 0x2f0
#define APIC_ICR 0x300
#define APIC_DEST_SELF 0x40000
#define APIC_DEST_ALLINC 0x80000
......
arch/x86/include/asm/cacheflush.h
View file @ 78b020d0
......@@ -5,24 +5,43 @@
#include <linux/mm.h>
/* Caches aren't brain-dead on the intel. */
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_dcache_page(page) do { } while (0)
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
#define flush_icache_range(start, end) do { } while (0)
#define flush_icache_page(vma, pg) do { } while (0)
#define flush_icache_user_range(vma, pg, adr, len) do { } while (0)
#define flush_cache_vmap(start, end) do { } while (0)
#define flush_cache_vunmap(start, end) do { } while (0)
static inline void flush_cache_all(void) { }
static inline void flush_cache_mm(struct mm_struct *mm) { }
static inline void flush_cache_dup_mm(struct mm_struct *mm) { }
static inline void flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end) { }
static inline void flush_cache_page(struct vm_area_struct *vma,
unsigned long vmaddr, unsigned long pfn) { }
static inline void flush_dcache_page(struct page *page) { }
static inline void flush_dcache_mmap_lock(struct address_space *mapping) { }
static inline void flush_dcache_mmap_unlock(struct address_space *mapping) { }
static inline void flush_icache_range(unsigned long start,
unsigned long end) { }
static inline void flush_icache_page(struct vm_area_struct *vma,
struct page *page) { }
static inline void flush_icache_user_range(struct vm_area_struct *vma,
struct page *page,
unsigned long addr,
unsigned long len) { }
static inline void flush_cache_vmap(unsigned long start, unsigned long end) { }
static inline void flush_cache_vunmap(unsigned long start,
unsigned long end) { }
#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
memcpy((dst), (src), (len))
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
memcpy((dst), (src), (len))
static inline void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr,
void *dst, const void *src,
unsigned long len)
{
memcpy(dst, src, len);
}
static inline void copy_from_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr,
void *dst, const void *src,
unsigned long len)
{
memcpy(dst, src, len);
}
#define PG_non_WB PG_arch_1
PAGEFLAG(NonWB, non_WB)
......
arch/x86/include/asm/efi.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/entry_arch.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/fixmap.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/hardirq.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/hw_irq.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/i387.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/init.h 0 → 100644
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/io.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/irq.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/irq_vectors.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/kexec.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/linkage.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/mce.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/mmzone_32.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/msr-index.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/page_types.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/pat.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/percpu.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/pgtable.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/pgtable_32_types.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/pgtable_types.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/uv/uv_hub.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/include/asm/xen/page.h
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/Makefile
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/alternative.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/apic/apic.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/cpu/amd.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/cpu/intel.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/cpu/mcheck/Makefile
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/cpu/mcheck/mce_32.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/cpu/mcheck/mce_64.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/cpu/mcheck/mce_amd_64.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/cpu/mcheck/mce_intel_64.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/cpu/mcheck/threshold.c 0 → 100644
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/ds.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/efi.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/efi_64.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/entry_64.S
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/i387.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/irq.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/irq_32.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/irqinit_32.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/irqinit_64.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/machine_kexec_32.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/machine_kexec_64.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/mpparse.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/reboot.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/relocate_kernel_32.S
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/relocate_kernel_64.S
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/setup.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/setup_percpu.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/smpboot.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/tlb_uv.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/uv_time.c 0 → 100644
View file @ 78b020d0
This diff is collapsed.
arch/x86/kernel/vmlinux_64.lds.S
View file @ 78b020d0
This diff is collapsed.
arch/x86/lguest/boot.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/math-emu/fpu_aux.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/mm/highmem_32.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/mm/init.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/mm/init_32.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/mm/init_64.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/mm/ioremap.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/mm/kmmio.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/mm/memtest.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/mm/numa_32.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/mm/testmmiotrace.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/xen/enlighten.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/xen/mmu.c
View file @ 78b020d0
This diff is collapsed.
arch/x86/xen/smp.c
View file @ 78b020d0
This diff is collapsed.
arch/xtensa/Kconfig
View file @ 78b020d0
This diff is collapsed.
arch/xtensa/kernel/setup.c
View file @ 78b020d0
This diff is collapsed.
arch/xtensa/kernel/traps.c
View file @ 78b020d0
This diff is collapsed.
arch/xtensa/mm/fault.c
View file @ 78b020d0
This diff is collapsed.
arch/xtensa/platforms/iss/console.c
View file @ 78b020d0
This diff is collapsed.
block/blk-merge.c
View file @ 78b020d0
This diff is collapsed.
block/blktrace.c
View file @ 78b020d0
This diff is collapsed.
crypto/api.c
View file @ 78b020d0
This diff is collapsed.
drivers/acpi/processor_perflib.c
View file @ 78b020d0
This diff is collapsed.
drivers/ata/ahci.c
View file @ 78b020d0
This diff is collapsed.
drivers/ata/libata-core.c
View file @ 78b020d0
This diff is collapsed.
drivers/ata/libata-eh.c
View file @ 78b020d0
This diff is collapsed.
drivers/ata/sata_nv.c
View file @ 78b020d0
This diff is collapsed.
drivers/base/node.c
View file @ 78b020d0
This diff is collapsed.
drivers/block/aoe/aoedev.c
View file @ 78b020d0
This diff is collapsed.
drivers/block/cciss.c
View file @ 78b020d0
This diff is collapsed.
drivers/block/loop.c
View file @ 78b020d0
This diff is collapsed.
drivers/block/xen-blkfront.c
View file @ 78b020d0
This diff is collapsed.
drivers/char/agp/amd64-agp.c
View file @ 78b020d0
This diff is collapsed.
drivers/char/agp/intel-agp.c
View file @ 78b020d0
This diff is collapsed.
drivers/cpufreq/cpufreq.c
View file @ 78b020d0
This diff is collapsed.
drivers/crypto/ixp4xx_crypto.c
View file @ 78b020d0
This diff is collapsed.
drivers/crypto/padlock-aes.c
View file @ 78b020d0
This diff is collapsed.
drivers/crypto/padlock-sha.c
View file @ 78b020d0
This diff is collapsed.
drivers/dca/dca-core.c
View file @ 78b020d0
This diff is collapsed.
drivers/dma/dmatest.c
View file @ 78b020d0
This diff is collapsed.
drivers/dma/fsldma.c
View file @ 78b020d0
This diff is collapsed.
drivers/dma/ioat.c
View file @ 78b020d0
This diff is collapsed.
drivers/dma/ioat_dca.c
View file @ 78b020d0
This diff is collapsed.
drivers/dma/ioat_dma.c
View file @ 78b020d0
This diff is collapsed.
drivers/dma/ioatdma.h
View file @ 78b020d0
This diff is collapsed.
drivers/dma/ioatdma_hw.h
View file @ 78b020d0
This diff is collapsed.
drivers/dma/ioatdma_registers.h
View file @ 78b020d0
This diff is collapsed.
drivers/dma/iop-adma.c
View file @ 78b020d0
This diff is collapsed.
drivers/dma/ipu/ipu_idmac.c
View file @ 78b020d0
This diff is collapsed.
drivers/dma/mv_xor.c
View file @ 78b020d0
This diff is collapsed.
drivers/gpu/drm/drm_stub.c
View file @ 78b020d0
This diff is collapsed.
drivers/hwmon/lm85.c
View file @ 78b020d0
This diff is collapsed.
drivers/i2c/busses/i2c-mv64xxx.c
View file @ 78b020d0
This diff is collapsed.
drivers/ide/Kconfig
View file @ 78b020d0
This diff is collapsed.
drivers/ide/Makefile
View file @ 78b020d0
This diff is collapsed.
drivers/ide/at91_ide.c 0 → 100644
View file @ 78b020d0
This diff is collapsed.
drivers/ide/ide-disk_proc.c
View file @ 78b020d0
This diff is collapsed.
drivers/ide/ide-floppy_proc.c
View file @ 78b020d0
This diff is collapsed.
drivers/ide/ide-io.c
View file @ 78b020d0
This diff is collapsed.
drivers/ide/ide-iops.c
View file @ 78b020d0
This diff is collapsed.
drivers/ide/ide-probe.c
View file @ 78b020d0
This diff is collapsed.
drivers/ide/ide-proc.c
View file @ 78b020d0
This diff is collapsed.
drivers/ide/ide-tape.c
View file @ 78b020d0
This diff is collapsed.
drivers/lguest/lguest_device.c
View file @ 78b020d0
This diff is collapsed.
drivers/md/md.c
View file @ 78b020d0
This diff is collapsed.
drivers/mmc/core/mmc_ops.c
View file @ 78b020d0
This diff is collapsed.
drivers/mtd/devices/mtd_dataflash.c
View file @ 78b020d0
This diff is collapsed.
drivers/mtd/maps/physmap.c
View file @ 78b020d0
This diff is collapsed.
drivers/mtd/nand/orion_nand.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/arm/Makefile
View file @ 78b020d0
This diff is collapsed.
drivers/net/arm/etherh.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/arm/ks8695net.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/bonding/bond_main.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/jme.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/pcmcia/3c574_cs.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/pcmcia/3c589_cs.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/smc911x.h
View file @ 78b020d0
This diff is collapsed.
drivers/net/sungem.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/tg3.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/tokenring/tmspci.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/ucc_geth_mii.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/usb/dm9601.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/wireless/iwlwifi/iwl-agn.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/wireless/iwlwifi/iwl3945-base.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/wireless/p54/p54common.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/wireless/rt2x00/rt2500usb.c
View file @ 78b020d0
This diff is collapsed.
drivers/net/wireless/rt2x00/rt73usb.c
View file @ 78b020d0
This diff is collapsed.
drivers/video/i810/i810_main.c
View file @ 78b020d0
This diff is collapsed.
drivers/video/pxafb.c
View file @ 78b020d0
This diff is collapsed.
drivers/video/sh_mobile_lcdcfb.c
View file @ 78b020d0
This diff is collapsed.
drivers/watchdog/gef_wdt.c
View file @ 78b020d0
This diff is collapsed.
drivers/watchdog/ks8695_wdt.c
View file @ 78b020d0
This diff is collapsed.
drivers/watchdog/orion5x_wdt.c
View file @ 78b020d0
This diff is collapsed.
drivers/watchdog/rc32434_wdt.c
View file @ 78b020d0
This diff is collapsed.
fs/btrfs/ctree.c
View file @ 78b020d0
This diff is collapsed.
fs/btrfs/disk-io.c
View file @ 78b020d0
This diff is collapsed.
fs/btrfs/extent-tree.c
View file @ 78b020d0
This diff is collapsed.
fs/btrfs/locking.c
View file @ 78b020d0
This diff is collapsed.
fs/btrfs/locking.h
View file @ 78b020d0
This diff is collapsed.
fs/devpts/inode.c
View file @ 78b020d0
This diff is collapsed.
fs/ext4/ialloc.c
View file @ 78b020d0
This diff is collapsed.
fs/squashfs/block.c
View file @ 78b020d0
This diff is collapsed.
fs/squashfs/cache.c
View file @ 78b020d0
This diff is collapsed.
fs/squashfs/inode.c
View file @ 78b020d0
This diff is collapsed.
fs/squashfs/squashfs.h
View file @ 78b020d0
This diff is collapsed.
fs/squashfs/super.c
View file @ 78b020d0
This diff is collapsed.
include/linux/ata.h
View file @ 78b020d0
This diff is collapsed.
include/linux/bootmem.h
View file @ 78b020d0
This diff is collapsed.
include/linux/cpufreq.h
View file @ 78b020d0
This diff is collapsed.
include/linux/dmaengine.h
View file @ 78b020d0
This diff is collapsed.
include/linux/hdreg.h
View file @ 78b020d0
This diff is collapsed.
include/linux/ide.h
View file @ 78b020d0
This diff is collapsed.
include/linux/libata.h
View file @ 78b020d0
This diff is collapsed.
include/linux/netdevice.h
View file @ 78b020d0
This diff is collapsed.
include/linux/percpu.h
View file @ 78b020d0
This diff is collapsed.
include/linux/rcuclassic.h
View file @ 78b020d0
This diff is collapsed.
include/linux/rcupdate.h
View file @ 78b020d0
This diff is collapsed.
include/linux/rcupreempt.h
View file @ 78b020d0
This diff is collapsed.
include/linux/rcutree.h
View file @ 78b020d0
This diff is collapsed.
include/linux/sched.h
View file @ 78b020d0
This diff is collapsed.
include/linux/serio.h
View file @ 78b020d0
This diff is collapsed.
include/linux/vmalloc.h
View file @ 78b020d0
This diff is collapsed.
include/net/net_namespace.h
View file @ 78b020d0
This diff is collapsed.
init/Kconfig
View file @ 78b020d0
This diff is collapsed.
init/main.c
View file @ 78b020d0
This diff is collapsed.
kernel/fork.c
View file @ 78b020d0
This diff is collapsed.
kernel/module.c
View file @ 78b020d0
This diff is collapsed.
kernel/rcuclassic.c
View file @ 78b020d0
This diff is collapsed.
kernel/rcupdate.c
View file @ 78b020d0
This diff is collapsed.
kernel/rcupreempt.c
View file @ 78b020d0
This diff is collapsed.
kernel/rcutree.c
View file @ 78b020d0
This diff is collapsed.
kernel/sched.c
View file @ 78b020d0
This diff is collapsed.
kernel/softirq.c
View file @ 78b020d0
This diff is collapsed.
kernel/stop_machine.c
View file @ 78b020d0
This diff is collapsed.
kernel/sys.c
View file @ 78b020d0
This diff is collapsed.
kernel/tsacct.c
View file @ 78b020d0
This diff is collapsed.
kernel/user.c
View file @ 78b020d0
This diff is collapsed.
lib/idr.c
View file @ 78b020d0
This diff is collapsed.
mm/Makefile
View file @ 78b020d0
This diff is collapsed.
mm/allocpercpu.c
View file @ 78b020d0
This diff is collapsed.
mm/bootmem.c
View file @ 78b020d0
This diff is collapsed.
mm/percpu.c 0 → 100644
View file @ 78b020d0
This diff is collapsed.
mm/vmalloc.c
View file @ 78b020d0
This diff is collapsed.
net/802/tr.c
View file @ 78b020d0
This diff is collapsed.
net/8021q/vlan_dev.c
View file @ 78b020d0
This diff is collapsed.
net/core/dev.c
View file @ 78b020d0
This diff is collapsed.
net/core/net-sysfs.c
View file @ 78b020d0
This diff is collapsed.
net/core/net_namespace.c
View file @ 78b020d0
This diff is collapsed.
net/ipv4/af_inet.c
View file @ 78b020d0
This diff is collapsed.
net/ipv4/icmp.c
View file @ 78b020d0
This diff is collapsed.
net/ipv4/route.c
View file @ 78b020d0
This diff is collapsed.
net/ipv4/tcp_ipv4.c
View file @ 78b020d0
This diff is collapsed.
net/ipv6/addrconf.c
View file @ 78b020d0
This diff is collapsed.
net/ipv6/af_inet6.c
View file @ 78b020d0
This diff is collapsed.
net/netlink/af_netlink.c
View file @ 78b020d0
This diff is collapsed.
net/sched/act_police.c
View file @ 78b020d0
This diff is collapsed.
net/sctp/protocol.c
View file @ 78b020d0
This diff is collapsed.
net/sctp/sm_sideeffect.c
View file @ 78b020d0
This diff is collapsed.
net/sctp/sm_statefuns.c
View file @ 78b020d0
This diff is collapsed.
net/wireless/reg.c
View file @ 78b020d0
This diff is collapsed.
security/smack/smack_lsm.c
View file @ 78b020d0
This diff is collapsed.
security/smack/smackfs.c
View file @ 78b020d0
This diff is collapsed.
sound/pci/hda/patch_sigmatel.c
View file @ 78b020d0
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7