spi: Remove explictly set bus_num and num_chipselect to default setting

The purpose of commit 1e8a52e1
"spi: By default setup spi_masters with 1 chipselect and dynamics bus number"
is to avoid setting default value for bus_num and num_chipselect in spi master
drivers. So let's remove the duplicate code.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-By: David Daney <david.daney@cavium.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

drivers/spi/spi-bcm2835.c

@@ -315,7 +315,6 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 
 	master->mode_bits = BCM2835_SPI_MODE_BITS;
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
-	master->bus_num = -1;
 	master->num_chipselect = 3;
 	master->transfer_one_message = bcm2835_spi_transfer_one;
 	master->dev.of_node = pdev->dev.of_node;

drivers/spi/spi-efm32.c

@@ -308,10 +308,6 @@ static int efm32_spi_probe_dt(struct platform_device *pdev,
 	}
 
 	ddata->pdata.location = location;
-
-	/* spi core takes care about the bus number using an alias */
-	master->bus_num = -1;
-
 	return 0;
 }
 

drivers/spi/spi-falcon.c

@@ -422,9 +422,7 @@ static int falcon_sflash_probe(struct platform_device *pdev)
 	priv->master = master;
 
 	master->mode_bits = SPI_MODE_3;
-	master->num_chipselect = 1;
 	master->flags = SPI_MASTER_HALF_DUPLEX;
-	master->bus_num = -1;
 	master->setup = falcon_sflash_setup;
 	master->prepare_transfer_hardware = falcon_sflash_prepare_xfer;
 	master->transfer_one_message = falcon_sflash_xfer_one;

drivers/spi/spi-octeon.c

@@ -257,8 +257,6 @@ static int octeon_spi_probe(struct platform_device *pdev)
 	p->register_base = (u64)devm_ioremap(&pdev->dev, res_mem->start,
 					     resource_size(res_mem));
 
-	/* Dynamic bus numbering */
-	master->bus_num = -1;
 	master->num_chipselect = 4;
 	master->mode_bits = SPI_CPHA |
 			    SPI_CPOL |

drivers/spi/spi-sh-hspi.c

@@ -298,7 +298,6 @@ static int hspi_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(&pdev->dev);
 
-	master->num_chipselect	= 1;
 	master->bus_num		= pdev->id;
 	master->setup		= hspi_setup;
 	master->cleanup		= hspi_cleanup;

drivers/spi/spi-tegra114.c

@@ -1058,7 +1058,6 @@ static int tegra_spi_probe(struct platform_device *pdev)
 	master->setup = tegra_spi_setup;
 	master->transfer_one_message = tegra_spi_transfer_one_message;
 	master->num_chipselect = MAX_CHIP_SELECT;
-	master->bus_num = -1;
 	master->auto_runtime_pm = true;
 
 	tspi->master = master;

drivers/spi/spi-tegra20-sflash.c

@@ -471,7 +471,6 @@ static int tegra_sflash_probe(struct platform_device *pdev)
 	master->transfer_one_message = tegra_sflash_transfer_one_message;
 	master->auto_runtime_pm = true;
 	master->num_chipselect = MAX_CHIP_SELECT;
-	master->bus_num = -1;
 
 	platform_set_drvdata(pdev, master);
 	tsd = spi_master_get_devdata(master);

drivers/spi/spi-tegra20-slink.c

@@ -1053,7 +1053,6 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	master->unprepare_message = tegra_slink_unprepare_message;
 	master->auto_runtime_pm = true;
 	master->num_chipselect = MAX_CHIP_SELECT;
-	master->bus_num = -1;
 
 	platform_set_drvdata(pdev, master);
 	tspi = spi_master_get_devdata(master);

drivers/spi/spi-ti-qspi.c

@@ -429,7 +429,6 @@ static int ti_qspi_probe(struct platform_device *pdev)
 
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD;
 
-	master->bus_num = -1;
 	master->flags = SPI_MASTER_HALF_DUPLEX;
 	master->setup = ti_qspi_setup;
 	master->auto_runtime_pm = true;