Merge tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt patches for 5.14-rc1.

  Nothing major here just lots of little changes for new hardware and
  features. Highlights are:

   - more USB 4 support added to the thunderbolt core

   - build warning fixes all over the place

   - usb-serial driver updates and new device support

   - mtu3 driver updates

   - gadget driver updates

   - dwc3 driver updates

   - dwc2 driver updates

   - isp1760 host driver updates

   - musb driver updates

   - lots of other tiny things.

  Full details are in the shortlog.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits)
  phy: qcom-qusb2: Add configuration for SM4250 and SM6115
  dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible
  dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250
  USB: cdc-acm: blacklist Heimann USB Appset device
  usb: xhci-mtk: allow multiple Start-Split in a microframe
  usb: ftdi-elan: remove redundant continue statement in a while-loop
  usb: class: cdc-wdm: return the correct errno code
  xhci: remove redundant continue statement
  usb: dwc3: Fix debugfs creation flow
  usb: gadget: hid: fix error return code in hid_bind()
  usb: gadget: eem: fix echo command packet response issue
  usb: gadget: f_hid: fix endianness issue with descriptors
  Revert "USB: misc: Add onboard_usb_hub driver"
  Revert "of/platform: Add stubs for of_platform_device_create/destroy()"
  Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()"
  Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub"
  xhci: solve a double free problem while doing s4
  xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning
  xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk
  xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES
  ...

Documentation/ABI/testing/configfs-usb-gadget-uac2

@@ -8,6 +8,8 @@ Description:
 		c_chmask   capture channel mask
 		c_srate    capture sampling rate
 		c_ssize    capture sample size (bytes)
+		c_sync     capture synchronization type (async/adaptive)
+		fb_max     maximum extra bandwidth in async mode
 		p_chmask   playback channel mask
 		p_srate    playback sampling rate
 		p_ssize    playback sample size (bytes)

Documentation/ABI/testing/sysfs-bus-thunderbolt

-What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl
+What:		/sys/bus/thunderbolt/devices/.../domainX/boot_acl
 Date:		Jun 2018
 KernelVersion:	4.17
 Contact:	thunderbolt-software@lists.01.org
@@ -21,7 +21,7 @@ Description:	Holds a comma separated list of device unique_ids that
 		If a device is authorized automatically during boot its
 		boot attribute is set to 1.
 
-What: /sys/bus/thunderbolt/devices/.../domainX/deauthorization
+What:		/sys/bus/thunderbolt/devices/.../domainX/deauthorization
 Date:		May 2021
 KernelVersion:	5.12
 Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
@@ -30,7 +30,7 @@ Description:	This attribute tells whether the system supports
 		de-authorize PCIe tunnel by writing 0 to authorized
 		attribute under each device.
 
-What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection
+What:		/sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection
 Date:		Mar 2019
 KernelVersion:	4.21
 Contact:	thunderbolt-software@lists.01.org
@@ -39,7 +39,7 @@ Description:	This attribute tells whether the system uses IOMMU
 		it is not (DMA protection is solely based on Thunderbolt
 		security levels).
 
-What: /sys/bus/thunderbolt/devices/.../domainX/security
+What:		/sys/bus/thunderbolt/devices/.../domainX/security
 Date:		Sep 2017
 KernelVersion:	4.13
 Contact:	thunderbolt-software@lists.01.org
@@ -61,7 +61,7 @@ Description:	This attribute holds current Thunderbolt security level
 			 the BIOS.
 		=======  ==================================================
 
-What: /sys/bus/thunderbolt/devices/.../authorized
+What:		/sys/bus/thunderbolt/devices/.../authorized
 Date:		Sep 2017
 KernelVersion:	4.13
 Contact:	thunderbolt-software@lists.01.org
@@ -95,14 +95,14 @@ Description:	This attribute is used to authorize Thunderbolt devices
 		    EKEYREJECTED if the challenge response did not match.
 		==  ========================================================
 
-What: /sys/bus/thunderbolt/devices/.../boot
+What:		/sys/bus/thunderbolt/devices/.../boot
 Date:		Jun 2018
 KernelVersion:	4.17
 Contact:	thunderbolt-software@lists.01.org
 Description:	This attribute contains 1 if Thunderbolt device was already
 		authorized on boot and 0 otherwise.
 
-What: /sys/bus/thunderbolt/devices/.../generation
+What:		/sys/bus/thunderbolt/devices/.../generation
 Date:		Jan 2020
 KernelVersion:	5.5
 Contact:	Christian Kellner <christian@kellner.me>
@@ -110,7 +110,7 @@ Description:	This attribute contains the generation of the Thunderbolt
 		controller associated with the device. It will contain 4
 		for USB4.
 
-What: /sys/bus/thunderbolt/devices/.../key
+What:		/sys/bus/thunderbolt/devices/.../key
 Date:		Sep 2017
 KernelVersion:	4.13
 Contact:	thunderbolt-software@lists.01.org
@@ -213,12 +213,15 @@ Description:	When new NVM image is written to the non-active NVM
 		restarted with the new NVM firmware. If the image
 		verification fails an error code is returned instead.
 
-		This file will accept writing values "1" or "2"
+		This file will accept writing values "1", "2" or "3".
 
 		- Writing "1" will flush the image to the storage
 		  area and authenticate the image in one action.
 		- Writing "2" will run some basic validation on the image
 		  and flush it to the storage area.
+		- Writing "3" will authenticate the image that is
+		  currently written in the storage area. This is only
+		  supported with USB4 devices and retimers.
 
 		When read holds status of the last authentication
 		operation if an error occurred during the process. This
@@ -226,6 +229,20 @@ Description:	When new NVM image is written to the non-active NVM
 		based mailbox before the device is power cycled. Writing
 		0 here clears the status.
 
+What:		/sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mario Limonciello <mario.limonciello@dell.com>
+Description:	For supported devices, automatically authenticate the new Thunderbolt
+		image when the device is disconnected from the host system.
+
+		This file will accept writing values "1" or "2"
+
+		- Writing "1" will flush the image to the storage
+		  area and prepare the device for authentication on disconnect.
+		- Writing "2" will run some basic validation on the image
+		  and flush it to the storage area.
+
 What:		/sys/bus/thunderbolt/devices/<xdomain>.<service>/key
 Date:		Jan 2018
 KernelVersion:	4.15
@@ -276,6 +293,39 @@ Contact:	thunderbolt-software@lists.01.org
 Description:	This contains XDomain service specific settings as
 		bitmask. Format: %x
 
+What:		/sys/bus/thunderbolt/devices/usb4_portX/link
+Date:		Sep 2021
+KernelVersion:	v5.14
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Returns the current link mode. Possible values are
+		"usb4", "tbt" and "none".
+
+What:		/sys/bus/thunderbolt/devices/usb4_portX/offline
+Date:		Sep 2021
+KernelVersion:	v5.14
+Contact:	Rajmohan Mani <rajmohan.mani@intel.com>
+Description:	Writing 1 to this attribute puts the USB4 port into
+		offline mode. Only allowed when there is nothing
+		connected to the port (link attribute returns "none").
+		Once the port is in offline mode it does not receive any
+		hotplug events. This is used to update NVM firmware of
+		on-board retimers. Writing 0 puts the port back to
+		online mode.
+
+		This attribute is only visible if the platform supports
+		powering on retimers when there is no cable connected.
+
+What:		/sys/bus/thunderbolt/devices/usb4_portX/rescan
+Date:		Sep 2021
+KernelVersion:	v5.14
+Contact:	Rajmohan Mani <rajmohan.mani@intel.com>
+Description:	When the USB4 port is in offline mode writing 1 to this
+		attribute forces rescan of the sideband for on-board
+		retimers. Each retimer appear under the USB4 port as if
+		the USB4 link was up. These retimers act in the same way
+		as if the cable was connected so upgrading their NVM
+		firmware can be done the usual way.
+
 What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/device
 Date:		Oct 2020
 KernelVersion:	v5.9
@@ -308,17 +358,3 @@ Date:		Oct 2020
 KernelVersion:	v5.9
 Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
 Description:	Retimer vendor identifier read from the hardware.
-
-What:		/sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect
-Date:		Oct 2020
-KernelVersion:	v5.9
-Contact:	Mario Limonciello <mario.limonciello@dell.com>
-Description:	For supported devices, automatically authenticate the new Thunderbolt
-		image when the device is disconnected from the host system.
-
-		This file will accept writing values "1" or "2"
-
-		- Writing "1" will flush the image to the storage
-		  area and prepare the device for authentication on disconnect.
-		- Writing "2" will run some basic validation on the image
-		  and flush it to the storage area.

Documentation/ABI/testing/sysfs-bus-usb

@@ -154,17 +154,6 @@ Description:
 		files hold a string value (enable or disable) indicating whether
 		or not USB3 hardware LPM U1 or U2 is enabled for the device.
 
-What:		/sys/bus/usb/devices/.../removable
-Date:		February 2012
-Contact:	Matthew Garrett <mjg@redhat.com>
-Description:
-		Some information about whether a given USB device is
-		physically fixed to the platform can be inferred from a
-		combination of hub descriptor bits and platform-specific data
-		such as ACPI. This file will read either "removable" or
-		"fixed" if the information is available, and "unknown"
-		otherwise.
-
 What:		/sys/bus/usb/devices/.../ltm_capable
 Date:		July 2012
 Contact:	Sarah Sharp <sarah.a.sharp@linux.intel.com>

Documentation/ABI/testing/sysfs-devices-removable

+What:		/sys/devices/.../removable
+Date:		May 2021
+Contact:	Rajat Jain <rajatxjain@gmail.com>
+Description:
+		Information about whether a given device can be removed from the
+		platform by the	user. This is determined by its subsystem in a
+		bus / platform-specific way. This attribute is only present for
+		devices that can support determining such information:
+
+		"removable": device can be removed from the platform by the user
+		"fixed":     device is fixed to the platform / cannot be removed
+			     by the user.
+		"unknown":   The information is unavailable / cannot be deduced.
+
+		Currently this is only supported by USB (which infers the
+		information from a combination of hub descriptor bits and
+		platform-specific data such as ACPI) and PCI (which gets this
+		from ACPI / device tree).

Documentation/admin-guide/thunderbolt.rst

@@ -256,6 +256,35 @@ Note names of the NVMem devices ``nvm_activeN`` and ``nvm_non_activeN``
 depend on the order they are registered in the NVMem subsystem. N in
 the name is the identifier added by the NVMem subsystem.
 
+Upgrading on-board retimer NVM when there is no cable connected
+---------------------------------------------------------------
+If the platform supports, it may be possible to upgrade the retimer NVM
+firmware even when there is nothing connected to the USB4
+ports. When this is the case the ``usb4_portX`` devices have two special
+attributes: ``offline`` and ``rescan``. The way to upgrade the firmware
+is to first put the USB4 port into offline mode::
+
+  # echo 1 > /sys/bus/thunderbolt/devices/0-0/usb4_port1/offline
+
+This step makes sure the port does not respond to any hotplug events,
+and also ensures the retimers are powered on. The next step is to scan
+for the retimers::
+
+  # echo 1 > /sys/bus/thunderbolt/devices/0-0/usb4_port1/rescan
+
+This enumerates and adds the on-board retimers. Now retimer NVM can be
+upgraded in the same way than with cable connected (see previous
+section). However, the retimer is not disconnected as we are offline
+mode) so after writing ``1`` to ``nvm_authenticate`` one should wait for
+5 or more seconds before running rescan again::
+
+  # echo 1 > /sys/bus/thunderbolt/devices/0-0/usb4_port1/rescan
+
+This point if everything went fine, the port can be put back to
+functional state again::
+
+  # echo 0 > /sys/bus/thunderbolt/devices/0-0/usb4_port1/offline
+
 Upgrading NVM when host controller is in safe mode
 --------------------------------------------------
 If the existing NVM is not properly authenticated (or is missing) the

Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml

@@ -15,7 +15,9 @@ properties:
     const: 1
 
   compatible:
-    const: allwinner,sun8i-h3-usb-phy
+    enum:
+      - allwinner,sun8i-h3-usb-phy
+      - allwinner,sun50i-h616-usb-phy
 
   reg:
     items:

Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml

@@ -23,6 +23,8 @@ properties:
               - qcom,msm8998-qusb2-phy
               - qcom,sdm660-qusb2-phy
               - qcom,ipq6018-qusb2-phy
+              - qcom,sm4250-qusb2-phy
+              - qcom,sm6115-qusb2-phy
       - items:
           - enum:
               - qcom,sc7180-qusb2-phy

Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml

@@ -22,6 +22,9 @@ properties:
               - allwinner,sun8i-a83t-musb
               - allwinner,sun50i-h6-musb
           - const: allwinner,sun8i-a33-musb
+      - items:
+          - const: allwinner,sun50i-h616-musb
+          - const: allwinner,sun8i-h3-musb
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/usb/cdns,usb3.yaml

@@ -75,6 +75,7 @@ required:
   - reg
   - reg-names
   - interrupts
+  - interrupt-names
 
 additionalProperties: false
 

Documentation/devicetree/bindings/usb/dwc2.yaml

@@ -24,6 +24,7 @@ properties:
               - rockchip,rk3188-usb
               - rockchip,rk3228-usb
               - rockchip,rk3288-usb
+              - rockchip,rk3308-usb
               - rockchip,rk3328-usb
               - rockchip,rk3368-usb
               - rockchip,rv1108-usb

Documentation/devicetree/bindings/usb/nxp,isp1760.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nxp,isp1760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP ISP1760 family controller bindings
+
+maintainers:
+  - Sebastian Siewior <bigeasy@linutronix.de>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  NXP ISP1760 family, which includes ISP1760/1761/1763 devicetree controller
+  bindings
+
+properties:
+  compatible:
+    enum:
+      - nxp,usb-isp1760
+      - nxp,usb-isp1761
+      - nxp,usb-isp1763
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Host controller interrupt
+      - description: Device controller interrupt in isp1761
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: host
+      - const: peripheral
+
+  bus-width:
+    description:
+      Number of data lines.
+    enum: [8, 16, 32]
+    default: 32
+
+  dr_mode:
+    enum:
+      - host
+      - peripheral
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    usb@40200000 {
+        compatible = "nxp,usb-isp1763";
+        reg = <0x40200000 0x100000>;
+        interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+        bus-width = <16>;
+        dr_mode = "host";
+    };
+
+...

Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

@@ -19,6 +19,8 @@ properties:
           - qcom,sc7280-dwc3
           - qcom,sdm845-dwc3
           - qcom,sdx55-dwc3
+          - qcom,sm4250-dwc3
+          - qcom,sm6115-dwc3
           - qcom,sm8150-dwc3
           - qcom,sm8250-dwc3
           - qcom,sm8350-dwc3

Documentation/devicetree/bindings/usb/realtek,rts5411.yaml

+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for the Realtek RTS5411 USB 3.0 hub controller
+
+maintainers:
+  - Matthias Kaehlcke <mka@chromium.org>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usbbda,5411
+          - usbbda,411
+
+  reg: true
+
+  vdd-supply:
+    description:
+      phandle to the regulator that provides power to the hub.
+
+  companion-hub:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description:
+      phandle to the companion hub on the controller.
+
+required:
+  - companion-hub
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usbbda,5411";
+            reg = <1>;
+            vdd-supply = <&pp3300_hub>;
+            companion-hub = <&hub_3_0>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+            compatible = "usbbda,411";
+            reg = <2>;
+            vdd-supply = <&pp3300_hub>;
+            companion-hub = <&hub_2_0>;
+        };
+    };

Documentation/driver-api/usb/error-codes.rst

@@ -61,6 +61,9 @@ USB-specific:
 			(c) requested data transfer length is invalid: negative
 			    or too large for the host controller.
 
+``-EBADR``		The wLength value in a control URB's setup packet does
+			not match the URB's transfer_buffer_length.
+
 ``-ENOSPC``		This request would overcommit the usb bandwidth reserved
 			for periodic transfers (interrupt, isochronous).
 

Documentation/usb/gadget-testing.rst

@@ -728,6 +728,8 @@ The uac2 function provides these attributes in its function directory:
 	c_chmask	capture channel mask
 	c_srate		capture sampling rate
 	c_ssize		capture sample size (bytes)
+	c_sync		capture synchronization type (async/adaptive)
+	fb_max          maximum extra bandwidth in async mode
 	p_chmask	playback channel mask
 	p_srate		playback sampling rate
 	p_ssize		playback sample size (bytes)

arch/arm/boot/dts/arm-realview-eb.dtsi

@@ -148,7 +148,7 @@ ethernet: ethernet@4e000000 {
 	usb: usb@4f000000 {
 		compatible = "nxp,usb-isp1761";
 		reg = <0x4f000000 0x20000>;
-		port1-otg;
+		dr_mode = "peripheral";
 	};
 
 	bridge {

arch/arm/boot/dts/arm-realview-pb1176.dts

@@ -166,7 +166,7 @@ usb@3b000000 {
 		reg = <0x3b000000 0x20000>;
 		interrupt-parent = <&intc_fpga1176>;
 		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-		port1-otg;
+		dr_mode = "peripheral";
 	};
 
 	bridge {

arch/arm/boot/dts/arm-realview-pb11mp.dts

@@ -712,7 +712,7 @@ usb@4f000000 {
 			reg = <0x4f000000 0x20000>;
 			interrupt-parent = <&intc_tc11mp>;
 			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
-			port1-otg;
+			dr_mode = "peripheral";
 		};
 	};
 };

arch/arm/boot/dts/arm-realview-pbx.dtsi

@@ -164,7 +164,7 @@ ethernet: ethernet@4e000000 {
 	usb: usb@4f000000 {
 		compatible = "nxp,usb-isp1761";
 		reg = <0x4f000000 0x20000>;
-		port1-otg;
+		dr_mode = "peripheral";
 	};
 
 	bridge {

arch/arm/boot/dts/vexpress-v2m-rs1.dtsi

@@ -144,7 +144,7 @@ usb@203000000 {
 				compatible = "nxp,usb-isp1761";
 				reg = <2 0x03000000 0x20000>;
 				interrupts = <16>;
-				port1-otg;
+				dr_mode = "peripheral";
 			};
 
 			iofpga-bus@300000000 {

arch/arm/boot/dts/vexpress-v2m.dtsi

@@ -62,7 +62,7 @@ usb@3,03000000 {
 				compatible = "nxp,usb-isp1761";
 				reg = <3 0x03000000 0x20000>;
 				interrupts = <16>;
-				port1-otg;
+				dr_mode = "peripheral";
 			};
 
 			iofpga@7,00000000 {

drivers/base/core.c

@@ -2409,6 +2409,25 @@ static ssize_t online_store(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR_RW(online);
 
+static ssize_t removable_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	const char *loc;
+
+	switch (dev->removable) {
+	case DEVICE_REMOVABLE:
+		loc = "removable";
+		break;
+	case DEVICE_FIXED:
+		loc = "fixed";
+		break;
+	default:
+		loc = "unknown";
+	}
+	return sysfs_emit(buf, "%s\n", loc);
+}
+static DEVICE_ATTR_RO(removable);
+
 int device_add_groups(struct device *dev, const struct attribute_group **groups)
 {
 	return sysfs_create_groups(&dev->kobj, groups);
@@ -2586,8 +2605,16 @@ static int device_add_attrs(struct device *dev)
 			goto err_remove_dev_online;
 	}
 
+	if (dev_removable_is_valid(dev)) {
+		error = device_create_file(dev, &dev_attr_removable);
+		if (error)
+			goto err_remove_dev_waiting_for_supplier;
+	}
+
 	return 0;
 
+ err_remove_dev_waiting_for_supplier:
+	device_remove_file(dev, &dev_attr_waiting_for_supplier);
  err_remove_dev_online:
 	device_remove_file(dev, &dev_attr_online);
  err_remove_dev_groups:
@@ -2607,6 +2634,7 @@ static void device_remove_attrs(struct device *dev)
 	struct class *class = dev->class;
 	const struct device_type *type = dev->type;
 
+	device_remove_file(dev, &dev_attr_removable);
 	device_remove_file(dev, &dev_attr_waiting_for_supplier);
 	device_remove_file(dev, &dev_attr_online);
 	device_remove_groups(dev, dev->groups);

drivers/pci/probe.c

@@ -1576,6 +1576,26 @@ static void set_pcie_untrusted(struct pci_dev *dev)
 		dev->untrusted = true;
 }
 
+static void pci_set_removable(struct pci_dev *dev)
+{
+	struct pci_dev *parent = pci_upstream_bridge(dev);
+
+	/*
+	 * We (only) consider everything downstream from an external_facing
+	 * device to be removable by the user. We're mainly concerned with
+	 * consumer platforms with user accessible thunderbolt ports that are
+	 * vulnerable to DMA attacks, and we expect those ports to be marked by
+	 * the firmware as external_facing. Devices in traditional hotplug
+	 * slots can technically be removed, but the expectation is that unless
+	 * the port is marked with external_facing, such devices are less
+	 * accessible to user / may not be removed by end user, and thus not
+	 * exposed as "removable" to userspace.
+	 */
+	if (parent &&
+	    (parent->external_facing || dev_is_removable(&parent->dev)))
+		dev_set_removable(&dev->dev, DEVICE_REMOVABLE);
+}
+
 /**
  * pci_ext_cfg_is_aliased - Is ext config space just an alias of std config?
  * @dev: PCI device
@@ -1823,6 +1843,8 @@ int pci_setup_device(struct pci_dev *dev)
 	/* Early fixups, before probing the BARs */
 	pci_fixup_device(pci_fixup_early, dev);
 
+	pci_set_removable(dev);
+
 	pci_info(dev, "[%04x:%04x] type %02x class %#08x\n",
 		 dev->vendor, dev->device, dev->hdr_type, dev->class);
 

drivers/phy/qualcomm/phy-qcom-qusb2.c

@@ -219,6 +219,22 @@ static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
 };
 
+static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = {
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x81),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x17),
+
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
+
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
+
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
+};
+
 static const unsigned int qusb2_v2_regs_layout[] = {
 	[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
 	[QUSB2PHY_PLL_STATUS]		= 0x1a0,
@@ -342,6 +358,18 @@ static const struct qusb2_phy_cfg sdm660_phy_cfg = {
 	.autoresume_en	 = BIT(3),
 };
 
+static const struct qusb2_phy_cfg sm6115_phy_cfg = {
+	.tbl		= sm6115_init_tbl,
+	.tbl_num	= ARRAY_SIZE(sm6115_init_tbl),
+	.regs		= msm8996_regs_layout,
+
+	.has_pll_test	= true,
+	.se_clk_scheme_default = true,
+	.disable_ctrl	= (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
+	.mask_core_ready = PLL_LOCKED,
+	.autoresume_en	 = BIT(3),
+};
+
 static const char * const qusb2_phy_vreg_names[] = {
 	"vdda-pll", "vdda-phy-dpdm",
 };
@@ -888,6 +916,12 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
 	}, {
 		.compatible	= "qcom,sdm660-qusb2-phy",
 		.data		= &sdm660_phy_cfg,
+	}, {
+		.compatible	= "qcom,sm4250-qusb2-phy",
+		.data		= &sm6115_phy_cfg,
+	}, {
+		.compatible	= "qcom,sm6115-qusb2-phy",
+		.data		= &sm6115_phy_cfg,
 	}, {
 		/*
 		 * Deprecated. Only here to support legacy device

drivers/phy/tegra/xusb.c

 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2014-2016, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2014-2020, NVIDIA CORPORATION.  All rights reserved.
  */
 
 #include <linux/delay.h>
@@ -321,11 +321,17 @@ static void tegra_xusb_lane_program(struct tegra_xusb_lane *lane)
 	if (soc->num_funcs < 2)
 		return;
 
+	if (lane->pad->ops->iddq_enable)
+		lane->pad->ops->iddq_enable(lane);
+
 	/* choose function */
 	value = padctl_readl(padctl, soc->offset);
 	value &= ~(soc->mask << soc->shift);
 	value |= lane->function << soc->shift;
 	padctl_writel(padctl, value, soc->offset);
+
+	if (lane->pad->ops->iddq_disable)
+		lane->pad->ops->iddq_disable(lane);
 }
 
 static void tegra_xusb_pad_program(struct tegra_xusb_pad *pad)
@@ -376,7 +382,7 @@ static int tegra_xusb_setup_pads(struct tegra_xusb_padctl *padctl)
 	return 0;
 }
 
-static bool tegra_xusb_lane_check(struct tegra_xusb_lane *lane,
+bool tegra_xusb_lane_check(struct tegra_xusb_lane *lane,
 				  const char *function)
 {
 	const char *func = lane->soc->funcs[lane->function];
@@ -1267,10 +1273,36 @@ static int tegra_xusb_padctl_remove(struct platform_device *pdev)
 	return err;
 }
 
+static int tegra_xusb_padctl_suspend_noirq(struct device *dev)
+{
+	struct tegra_xusb_padctl *padctl = dev_get_drvdata(dev);
+
+	if (padctl->soc && padctl->soc->ops && padctl->soc->ops->suspend_noirq)
+		return padctl->soc->ops->suspend_noirq(padctl);
+
+	return 0;
+}
+
+static int tegra_xusb_padctl_resume_noirq(struct device *dev)
+{
+	struct tegra_xusb_padctl *padctl = dev_get_drvdata(dev);
+
+	if (padctl->soc && padctl->soc->ops && padctl->soc->ops->resume_noirq)
+		return padctl->soc->ops->resume_noirq(padctl);
+
+	return 0;
+}
+
+static const struct dev_pm_ops tegra_xusb_padctl_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_xusb_padctl_suspend_noirq,
+				      tegra_xusb_padctl_resume_noirq)
+};
+
 static struct platform_driver tegra_xusb_padctl_driver = {
 	.driver = {
 		.name = "tegra-xusb-padctl",
 		.of_match_table = tegra_xusb_padctl_of_match,
+		.pm = &tegra_xusb_padctl_pm_ops,
 	},
 	.probe = tegra_xusb_padctl_probe,
 	.remove = tegra_xusb_padctl_remove,
@@ -1337,6 +1369,62 @@ int tegra_xusb_padctl_hsic_set_idle(struct tegra_xusb_padctl *padctl,
 }
 EXPORT_SYMBOL_GPL(tegra_xusb_padctl_hsic_set_idle);
 
+int tegra_xusb_padctl_enable_phy_sleepwalk(struct tegra_xusb_padctl *padctl, struct phy *phy,
+					   enum usb_device_speed speed)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+	if (lane->pad->ops->enable_phy_sleepwalk)
+		return lane->pad->ops->enable_phy_sleepwalk(lane, speed);
+
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_enable_phy_sleepwalk);
+
+int tegra_xusb_padctl_disable_phy_sleepwalk(struct tegra_xusb_padctl *padctl, struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+	if (lane->pad->ops->disable_phy_sleepwalk)
+		return lane->pad->ops->disable_phy_sleepwalk(lane);
+
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_disable_phy_sleepwalk);
+
+int tegra_xusb_padctl_enable_phy_wake(struct tegra_xusb_padctl *padctl, struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+	if (lane->pad->ops->enable_phy_wake)
+		return lane->pad->ops->enable_phy_wake(lane);
+
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_enable_phy_wake);
+
+int tegra_xusb_padctl_disable_phy_wake(struct tegra_xusb_padctl *padctl, struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+	if (lane->pad->ops->disable_phy_wake)
+		return lane->pad->ops->disable_phy_wake(lane);
+
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_disable_phy_wake);
+
+bool tegra_xusb_padctl_remote_wake_detected(struct tegra_xusb_padctl *padctl, struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+	if (lane->pad->ops->remote_wake_detected)
+		return lane->pad->ops->remote_wake_detected(lane);
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_remote_wake_detected);
+
 int tegra_xusb_padctl_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
 					   unsigned int port, bool enable)
 {

drivers/phy/tegra/xusb.h

 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (c) 2014-2015, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2014-2020, NVIDIA CORPORATION.  All rights reserved.
  * Copyright (c) 2015, Google Inc.
  */
 
@@ -11,6 +11,7 @@
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
 
+#include <linux/usb/ch9.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/role.h>
 
@@ -35,6 +36,10 @@ struct tegra_xusb_lane_soc {
 
 	const char * const *funcs;
 	unsigned int num_funcs;
+
+	struct {
+		unsigned int misc_ctl2;
+	} regs;
 };
 
 struct tegra_xusb_lane {
@@ -126,8 +131,17 @@ struct tegra_xusb_lane_ops {
 					 struct device_node *np,
 					 unsigned int index);
 	void (*remove)(struct tegra_xusb_lane *lane);
+	void (*iddq_enable)(struct tegra_xusb_lane *lane);
+	void (*iddq_disable)(struct tegra_xusb_lane *lane);
+	int (*enable_phy_sleepwalk)(struct tegra_xusb_lane *lane, enum usb_device_speed speed);
+	int (*disable_phy_sleepwalk)(struct tegra_xusb_lane *lane);
+	int (*enable_phy_wake)(struct tegra_xusb_lane *lane);
+	int (*disable_phy_wake)(struct tegra_xusb_lane *lane);
+	bool (*remote_wake_detected)(struct tegra_xusb_lane *lane);
 };
 
+bool tegra_xusb_lane_check(struct tegra_xusb_lane *lane, const char *function);
+
 /*
  * pads
  */
@@ -230,7 +244,7 @@ struct tegra_xusb_pcie_pad {
 	struct reset_control *rst;
 	struct clk *pll;
 
-	unsigned int enable;
+	bool enable;
 };
 
 static inline struct tegra_xusb_pcie_pad *
@@ -245,7 +259,7 @@ struct tegra_xusb_sata_pad {
 	struct reset_control *rst;
 	struct clk *pll;
 
-	unsigned int enable;
+	bool enable;
 };
 
 static inline struct tegra_xusb_sata_pad *
@@ -388,6 +402,8 @@ struct tegra_xusb_padctl_ops {
 			 const struct tegra_xusb_padctl_soc *soc);
 	void (*remove)(struct tegra_xusb_padctl *padctl);
 
+	int (*suspend_noirq)(struct tegra_xusb_padctl *padctl);
+	int (*resume_noirq)(struct tegra_xusb_padctl *padctl);
 	int (*usb3_save_context)(struct tegra_xusb_padctl *padctl,
 				 unsigned int index);
 	int (*hsic_set_idle)(struct tegra_xusb_padctl *padctl,

drivers/thunderbolt/Makefile

@@ -2,7 +2,7 @@
 obj-${CONFIG_USB4} := thunderbolt.o
 thunderbolt-objs := nhi.o nhi_ops.o ctl.o tb.o switch.o cap.o path.o tunnel.o eeprom.o
 thunderbolt-objs += domain.o dma_port.o icm.o property.o xdomain.o lc.o tmu.o usb4.o
-thunderbolt-objs += nvm.o retimer.o quirks.o
+thunderbolt-objs += usb4_port.o nvm.o retimer.o quirks.o
 
 thunderbolt-${CONFIG_ACPI} += acpi.o
 thunderbolt-$(CONFIG_DEBUG_FS) += debugfs.o

drivers/thunderbolt/acpi.c

@@ -180,3 +180,209 @@ bool tb_acpi_is_xdomain_allowed(void)
 		return osc_sb_native_usb4_control & OSC_USB_XDOMAIN;
 	return true;
 }
+
+/* UUID for retimer _DSM: e0053122-795b-4122-8a5e-57be1d26acb3 */
+static const guid_t retimer_dsm_guid =
+	GUID_INIT(0xe0053122, 0x795b, 0x4122,
+		  0x8a, 0x5e, 0x57, 0xbe, 0x1d, 0x26, 0xac, 0xb3);
+
+#define RETIMER_DSM_QUERY_ONLINE_STATE	1
+#define RETIMER_DSM_SET_ONLINE_STATE	2
+
+static int tb_acpi_retimer_set_power(struct tb_port *port, bool power)
+{
+	struct usb4_port *usb4 = port->usb4;
+	union acpi_object argv4[2];
+	struct acpi_device *adev;
+	union acpi_object *obj;
+	int ret;
+
+	if (!usb4->can_offline)
+		return 0;
+
+	adev = ACPI_COMPANION(&usb4->dev);
+	if (WARN_ON(!adev))
+		return 0;
+
+	/* Check if we are already powered on (and in correct mode) */
+	obj = acpi_evaluate_dsm_typed(adev->handle, &retimer_dsm_guid, 1,
+				      RETIMER_DSM_QUERY_ONLINE_STATE, NULL,
+				      ACPI_TYPE_INTEGER);
+	if (!obj) {
+		tb_port_warn(port, "ACPI: query online _DSM failed\n");
+		return -EIO;
+	}
+
+	ret = obj->integer.value;
+	ACPI_FREE(obj);
+
+	if (power == ret)
+		return 0;
+
+	tb_port_dbg(port, "ACPI: calling _DSM to power %s retimers\n",
+		    power ? "on" : "off");
+
+	argv4[0].type = ACPI_TYPE_PACKAGE;
+	argv4[0].package.count = 1;
+	argv4[0].package.elements = &argv4[1];
+	argv4[1].integer.type = ACPI_TYPE_INTEGER;
+	argv4[1].integer.value = power;
+
+	obj = acpi_evaluate_dsm_typed(adev->handle, &retimer_dsm_guid, 1,
+				      RETIMER_DSM_SET_ONLINE_STATE, argv4,
+				      ACPI_TYPE_INTEGER);
+	if (!obj) {
+		tb_port_warn(port,
+			     "ACPI: set online state _DSM evaluation failed\n");
+		return -EIO;
+	}
+
+	ret = obj->integer.value;
+	ACPI_FREE(obj);
+
+	if (ret >= 0) {
+		if (power)
+			return ret == 1 ? 0 : -EBUSY;
+		return 0;
+	}
+
+	tb_port_warn(port, "ACPI: set online state _DSM failed with error %d\n", ret);
+	return -EIO;
+}
+
+/**
+ * tb_acpi_power_on_retimers() - Call platform to power on retimers
+ * @port: USB4 port
+ *
+ * Calls platform to turn on power to all retimers behind this USB4
+ * port. After this function returns successfully the caller can
+ * continue with the normal retimer flows (as specified in the USB4
+ * spec). Note if this returns %-EBUSY it means the type-C port is in
+ * non-USB4/TBT mode (there is non-USB4/TBT device connected).
+ *
+ * This should only be called if the USB4/TBT link is not up.
+ *
+ * Returns %0 on success.
+ */
+int tb_acpi_power_on_retimers(struct tb_port *port)
+{
+	return tb_acpi_retimer_set_power(port, true);
+}
+
+/**
+ * tb_acpi_power_off_retimers() - Call platform to power off retimers
+ * @port: USB4 port
+ *
+ * This is the opposite of tb_acpi_power_on_retimers(). After returning
+ * successfully the normal operations with the @port can continue.
+ *
+ * Returns %0 on success.
+ */
+int tb_acpi_power_off_retimers(struct tb_port *port)
+{
+	return tb_acpi_retimer_set_power(port, false);
+}
+
+static bool tb_acpi_bus_match(struct device *dev)
+{
+	return tb_is_switch(dev) || tb_is_usb4_port_device(dev);
+}
+
+static struct acpi_device *tb_acpi_find_port(struct acpi_device *adev,
+					     const struct tb_port *port)
+{
+	struct acpi_device *port_adev;
+
+	if (!adev)
+		return NULL;
+
+	/*
+	 * Device routers exists under the downstream facing USB4 port
+	 * of the parent router. Their _ADR is always 0.
+	 */
+	list_for_each_entry(port_adev, &adev->children, node) {
+		if (acpi_device_adr(port_adev) == port->port)
+			return port_adev;
+	}
+
+	return NULL;
+}
+
+static struct acpi_device *tb_acpi_switch_find_companion(struct tb_switch *sw)
+{
+	struct acpi_device *adev = NULL;
+	struct tb_switch *parent_sw;
+
+	parent_sw = tb_switch_parent(sw);
+	if (parent_sw) {
+		struct tb_port *port = tb_port_at(tb_route(sw), parent_sw);
+		struct acpi_device *port_adev;
+
+		port_adev = tb_acpi_find_port(ACPI_COMPANION(&parent_sw->dev), port);
+		if (port_adev)
+			adev = acpi_find_child_device(port_adev, 0, false);
+	} else {
+		struct tb_nhi *nhi = sw->tb->nhi;
+		struct acpi_device *parent_adev;
+
+		parent_adev = ACPI_COMPANION(&nhi->pdev->dev);
+		if (parent_adev)
+			adev = acpi_find_child_device(parent_adev, 0, false);
+	}
+
+	return adev;
+}
+
+static struct acpi_device *tb_acpi_find_companion(struct device *dev)
+{
+	/*
+	 * The Thunderbolt/USB4 hierarchy looks like following:
+	 *
+	 * Device (NHI)
+	 *   Device (HR)		// Host router _ADR == 0
+	 *      Device (DFP0)		// Downstream port _ADR == lane 0 adapter
+	 *        Device (DR)		// Device router _ADR == 0
+	 *          Device (UFP)	// Upstream port _ADR == lane 0 adapter
+	 *      Device (DFP1)		// Downstream port _ADR == lane 0 adapter number
+	 *
+	 * At the moment we bind the host router to the corresponding
+	 * Linux device.
+	 */
+	if (tb_is_switch(dev))
+		return tb_acpi_switch_find_companion(tb_to_switch(dev));
+	else if (tb_is_usb4_port_device(dev))
+		return tb_acpi_find_port(ACPI_COMPANION(dev->parent),
+					 tb_to_usb4_port_device(dev)->port);
+	return NULL;
+}
+
+static void tb_acpi_setup(struct device *dev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(dev);
+	struct usb4_port *usb4 = tb_to_usb4_port_device(dev);
+
+	if (!adev || !usb4)
+		return;
+
+	if (acpi_check_dsm(adev->handle, &retimer_dsm_guid, 1,
+			   BIT(RETIMER_DSM_QUERY_ONLINE_STATE) |
+			   BIT(RETIMER_DSM_SET_ONLINE_STATE)))
+		usb4->can_offline = true;
+}
+
+static struct acpi_bus_type tb_acpi_bus = {
+	.name = "thunderbolt",
+	.match = tb_acpi_bus_match,
+	.find_companion = tb_acpi_find_companion,
+	.setup = tb_acpi_setup,
+};
+
+int tb_acpi_init(void)
+{
+	return register_acpi_bus_type(&tb_acpi_bus);
+}
+
+void tb_acpi_exit(void)
+{
+	unregister_acpi_bus_type(&tb_acpi_bus);
+}

drivers/thunderbolt/dma_port.c

@@ -299,15 +299,13 @@ static int dma_port_request(struct tb_dma_port *dma, u32 in,
 	return status_to_errno(out);
 }
 
-static int dma_port_flash_read_block(struct tb_dma_port *dma, u32 address,
-				     void *buf, u32 size)
+static int dma_port_flash_read_block(void *data, unsigned int dwaddress,
+				     void *buf, size_t dwords)
 {
+	struct tb_dma_port *dma = data;
 	struct tb_switch *sw = dma->sw;
-	u32 in, dwaddress, dwords;
 	int ret;
-
-	dwaddress = address / 4;
-	dwords = size / 4;
+	u32 in;
 
 	in = MAIL_IN_CMD_FLASH_READ << MAIL_IN_CMD_SHIFT;
 	if (dwords < MAIL_DATA_DWORDS)
@@ -323,14 +321,13 @@ static int dma_port_flash_read_block(struct tb_dma_port *dma, u32 address,
 			     dma->base + MAIL_DATA, dwords, DMA_PORT_TIMEOUT);
 }
 
-static int dma_port_flash_write_block(struct tb_dma_port *dma, u32 address,
-				      const void *buf, u32 size)
+static int dma_port_flash_write_block(void *data, unsigned int dwaddress,
+				      const void *buf, size_t dwords)
 {
+	struct tb_dma_port *dma = data;
 	struct tb_switch *sw = dma->sw;
-	u32 in, dwaddress, dwords;
 	int ret;
-
-	dwords = size / 4;
+	u32 in;
 
 	/* Write the block to MAIL_DATA registers */
 	ret = dma_port_write(sw->tb->ctl, buf, tb_route(sw), dma->port,
@@ -341,12 +338,8 @@ static int dma_port_flash_write_block(struct tb_dma_port *dma, u32 address,
 	in = MAIL_IN_CMD_FLASH_WRITE << MAIL_IN_CMD_SHIFT;
 
 	/* CSS header write is always done to the same magic address */
-	if (address >= DMA_PORT_CSS_ADDRESS) {
-		dwaddress = DMA_PORT_CSS_ADDRESS;
+	if (dwaddress >= DMA_PORT_CSS_ADDRESS)
 		in |= MAIL_IN_CSS;
-	} else {
-		dwaddress = address / 4;
-	}
 
 	in |= ((dwords - 1) << MAIL_IN_DWORDS_SHIFT) & MAIL_IN_DWORDS_MASK;
 	in |= (dwaddress << MAIL_IN_ADDRESS_SHIFT) & MAIL_IN_ADDRESS_MASK;
@@ -365,36 +358,8 @@ static int dma_port_flash_write_block(struct tb_dma_port *dma, u32 address,
 int dma_port_flash_read(struct tb_dma_port *dma, unsigned int address,
 			void *buf, size_t size)
 {
-	unsigned int retries = DMA_PORT_RETRIES;
-
-	do {
-		unsigned int offset;
-		size_t nbytes;
-		int ret;
-
-		offset = address & 3;
-		nbytes = min_t(size_t, size + offset, MAIL_DATA_DWORDS * 4);
-
-		ret = dma_port_flash_read_block(dma, address, dma->buf,
-						ALIGN(nbytes, 4));
-		if (ret) {
-			if (ret == -ETIMEDOUT) {
-				if (retries--)
-					continue;
-				ret = -EIO;
-			}
-			return ret;
-		}
-
-		nbytes -= offset;
-		memcpy(buf, dma->buf + offset, nbytes);
-
-		size -= nbytes;
-		address += nbytes;
-		buf += nbytes;
-	} while (size > 0);
-
-	return 0;
+	return tb_nvm_read_data(address, buf, size, DMA_PORT_RETRIES,
+				dma_port_flash_read_block, dma);
 }
 
 /**
@@ -411,40 +376,11 @@ int dma_port_flash_read(struct tb_dma_port *dma, unsigned int address,
 int dma_port_flash_write(struct tb_dma_port *dma, unsigned int address,
 			 const void *buf, size_t size)
 {
-	unsigned int retries = DMA_PORT_RETRIES;
-	unsigned int offset;
-
-	if (address >= DMA_PORT_CSS_ADDRESS) {
-		offset = 0;
-		if (size > DMA_PORT_CSS_MAX_SIZE)
-			return -E2BIG;
-	} else {
-		offset = address & 3;
-		address = address & ~3;
-	}
-
-	do {
-		u32 nbytes = min_t(u32, size, MAIL_DATA_DWORDS * 4);
-		int ret;
+	if (address >= DMA_PORT_CSS_ADDRESS && size > DMA_PORT_CSS_MAX_SIZE)
+		return -E2BIG;
 
-		memcpy(dma->buf + offset, buf, nbytes);
-
-		ret = dma_port_flash_write_block(dma, address, buf, nbytes);
-		if (ret) {
-			if (ret == -ETIMEDOUT) {
-				if (retries--)
-					continue;
-				ret = -EIO;
-			}
-			return ret;
-		}
-
-		size -= nbytes;
-		address += nbytes;
-		buf += nbytes;
-	} while (size > 0);
-
-	return 0;
+	return tb_nvm_write_data(address, buf, size, DMA_PORT_RETRIES,
+				 dma_port_flash_write_block, dma);
 }
 
 /**

drivers/thunderbolt/domain.c

@@ -881,11 +881,12 @@ int tb_domain_init(void)
 	int ret;
 
 	tb_test_init();
-
 	tb_debugfs_init();
+	tb_acpi_init();
+
 	ret = tb_xdomain_init();
 	if (ret)
-		goto err_debugfs;
+		goto err_acpi;
 	ret = bus_register(&tb_bus_type);
 	if (ret)
 		goto err_xdomain;
@@ -894,7 +895,8 @@ int tb_domain_init(void)
 
 err_xdomain:
 	tb_xdomain_exit();
-err_debugfs:
+err_acpi:
+	tb_acpi_exit();
 	tb_debugfs_exit();
 	tb_test_exit();
 
@@ -907,6 +909,7 @@ void tb_domain_exit(void)
 	ida_destroy(&tb_domain_ida);
 	tb_nvm_exit();
 	tb_xdomain_exit();
+	tb_acpi_exit();
 	tb_debugfs_exit();
 	tb_test_exit();
 }

drivers/thunderbolt/eeprom.c

@@ -214,7 +214,10 @@ static u32 tb_crc32(void *data, size_t len)
 	return ~__crc32c_le(~0, data, len);
 }
 
-#define TB_DROM_DATA_START 13
+#define TB_DROM_DATA_START		13
+#define TB_DROM_HEADER_SIZE		22
+#define USB4_DROM_HEADER_SIZE		16
+
 struct tb_drom_header {
 	/* BYTE 0 */
 	u8 uid_crc8; /* checksum for uid */
@@ -224,9 +227,9 @@ struct tb_drom_header {
 	u32 data_crc32; /* checksum for data_len bytes starting at byte 13 */
 	/* BYTE 13 */
 	u8 device_rom_revision; /* should be <= 1 */
-	u16 data_len:10;
-	u8 __unknown1:6;
-	/* BYTES 16-21 */
+	u16 data_len:12;
+	u8 reserved:4;
+	/* BYTES 16-21 - Only for TBT DROM, nonexistent in USB4 DROM */
 	u16 vendor_id;
 	u16 model_id;
 	u8 model_rev;
@@ -401,10 +404,10 @@ static int tb_drom_parse_entry_port(struct tb_switch *sw,
  *
  * Drom must have been copied to sw->drom.
  */
-static int tb_drom_parse_entries(struct tb_switch *sw)
+static int tb_drom_parse_entries(struct tb_switch *sw, size_t header_size)
 {
 	struct tb_drom_header *header = (void *) sw->drom;
-	u16 pos = sizeof(*header);
+	u16 pos = header_size;
 	u16 drom_size = header->data_len + TB_DROM_DATA_START;
 	int res;
 
@@ -566,7 +569,7 @@ static int tb_drom_parse(struct tb_switch *sw)
 			header->data_crc32, crc);
 	}
 
-	return tb_drom_parse_entries(sw);
+	return tb_drom_parse_entries(sw, TB_DROM_HEADER_SIZE);
 }
 
 static int usb4_drom_parse(struct tb_switch *sw)
@@ -583,7 +586,7 @@ static int usb4_drom_parse(struct tb_switch *sw)
 		return -EINVAL;
 	}
 
-	return tb_drom_parse_entries(sw);
+	return tb_drom_parse_entries(sw, USB4_DROM_HEADER_SIZE);
 }
 
 /**

drivers/thunderbolt/icm.c

@@ -1677,14 +1677,18 @@ static void icm_icl_rtd3_veto(struct tb *tb, const struct icm_pkg_header *hdr)
 
 static bool icm_tgl_is_supported(struct tb *tb)
 {
-	u32 val;
+	unsigned long end = jiffies + msecs_to_jiffies(10);
 
-	/*
-	 * If the firmware is not running use software CM. This platform
-	 * should fully support both.
-	 */
-	val = ioread32(tb->nhi->iobase + REG_FW_STS);
-	return !!(val & REG_FW_STS_NVM_AUTH_DONE);
+	do {
+		u32 val;
+
+		val = ioread32(tb->nhi->iobase + REG_FW_STS);
+		if (val & REG_FW_STS_NVM_AUTH_DONE)
+			return true;
+		usleep_range(100, 500);
+	} while (time_before(jiffies, end));
+
+	return false;
 }
 
 static void icm_handle_notification(struct work_struct *work)
@@ -2505,6 +2509,8 @@ struct tb *icm_probe(struct tb_nhi *nhi)
 	case PCI_DEVICE_ID_INTEL_TGL_NHI1:
 	case PCI_DEVICE_ID_INTEL_TGL_H_NHI0:
 	case PCI_DEVICE_ID_INTEL_TGL_H_NHI1:
+	case PCI_DEVICE_ID_INTEL_ADL_NHI0:
+	case PCI_DEVICE_ID_INTEL_ADL_NHI1:
 		icm->is_supported = icm_tgl_is_supported;
 		icm->driver_ready = icm_icl_driver_ready;
 		icm->set_uuid = icm_icl_set_uuid;

drivers/thunderbolt/lc.c

@@ -208,8 +208,8 @@ static int tb_lc_set_wake_one(struct tb_switch *sw, unsigned int offset,
 	if (ret)
 		return ret;
 
-	ctrl &= ~(TB_LC_SX_CTRL_WOC | TB_LC_SX_CTRL_WOD | TB_LC_SX_CTRL_WOP |
-		  TB_LC_SX_CTRL_WOU4);
+	ctrl &= ~(TB_LC_SX_CTRL_WOC | TB_LC_SX_CTRL_WOD | TB_LC_SX_CTRL_WODPC |
+		  TB_LC_SX_CTRL_WODPD | TB_LC_SX_CTRL_WOP | TB_LC_SX_CTRL_WOU4);
 
 	if (flags & TB_WAKE_ON_CONNECT)
 		ctrl |= TB_LC_SX_CTRL_WOC | TB_LC_SX_CTRL_WOD;
@@ -217,6 +217,8 @@ static int tb_lc_set_wake_one(struct tb_switch *sw, unsigned int offset,
 		ctrl |= TB_LC_SX_CTRL_WOU4;
 	if (flags & TB_WAKE_ON_PCIE)
 		ctrl |= TB_LC_SX_CTRL_WOP;
+	if (flags & TB_WAKE_ON_DP)
+		ctrl |= TB_LC_SX_CTRL_WODPC | TB_LC_SX_CTRL_WODPD;
 
 	return tb_sw_write(sw, &ctrl, TB_CFG_SWITCH, offset + TB_LC_SX_CTRL, 1);
 }

drivers/thunderbolt/nhi.c

@@ -17,7 +17,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/property.h>
-#include <linux/platform_data/x86/apple.h>
 
 #include "nhi.h"
 #include "nhi_regs.h"
@@ -1127,69 +1126,6 @@ static bool nhi_imr_valid(struct pci_dev *pdev)
 	return true;
 }
 
-/*
- * During suspend the Thunderbolt controller is reset and all PCIe
- * tunnels are lost. The NHI driver will try to reestablish all tunnels
- * during resume. This adds device links between the tunneled PCIe
- * downstream ports and the NHI so that the device core will make sure
- * NHI is resumed first before the rest.
- */
-static void tb_apple_add_links(struct tb_nhi *nhi)
-{
-	struct pci_dev *upstream, *pdev;
-
-	if (!x86_apple_machine)
-		return;
-
-	switch (nhi->pdev->device) {
-	case PCI_DEVICE_ID_INTEL_LIGHT_RIDGE:
-	case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C:
-	case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI:
-	case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI:
-		break;
-	default:
-		return;
-	}
-
-	upstream = pci_upstream_bridge(nhi->pdev);
-	while (upstream) {
-		if (!pci_is_pcie(upstream))
-			return;
-		if (pci_pcie_type(upstream) == PCI_EXP_TYPE_UPSTREAM)
-			break;
-		upstream = pci_upstream_bridge(upstream);
-	}
-
-	if (!upstream)
-		return;
-
-	/*
-	 * For each hotplug downstream port, create add device link
-	 * back to NHI so that PCIe tunnels can be re-established after
-	 * sleep.
-	 */
-	for_each_pci_bridge(pdev, upstream->subordinate) {
-		const struct device_link *link;
-
-		if (!pci_is_pcie(pdev))
-			continue;
-		if (pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM ||
-		    !pdev->is_hotplug_bridge)
-			continue;
-
-		link = device_link_add(&pdev->dev, &nhi->pdev->dev,
-				       DL_FLAG_AUTOREMOVE_SUPPLIER |
-				       DL_FLAG_PM_RUNTIME);
-		if (link) {
-			dev_dbg(&nhi->pdev->dev, "created link from %s\n",
-				dev_name(&pdev->dev));
-		} else {
-			dev_warn(&nhi->pdev->dev, "device link creation from %s failed\n",
-				 dev_name(&pdev->dev));
-		}
-	}
-}
-
 static struct tb *nhi_select_cm(struct tb_nhi *nhi)
 {
 	struct tb *tb;
@@ -1278,9 +1214,6 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 			return res;
 	}
 
-	tb_apple_add_links(nhi);
-	tb_acpi_add_links(nhi);
-
 	tb = nhi_select_cm(nhi);
 	if (!tb) {
 		dev_err(&nhi->pdev->dev,
@@ -1400,6 +1333,10 @@ static struct pci_device_id nhi_ids[] = {
 	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL_H_NHI1),
 	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADL_NHI0),
+	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADL_NHI1),
+	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
 
 	/* Any USB4 compliant host */
 	{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_USB4, ~0) },

drivers/thunderbolt/nhi.h

@@ -72,6 +72,8 @@ extern const struct tb_nhi_ops icl_nhi_ops;
 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_BRIDGE	0x15ea
 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_NHI		0x15eb
 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_BRIDGE	0x15ef
+#define PCI_DEVICE_ID_INTEL_ADL_NHI0			0x463e
+#define PCI_DEVICE_ID_INTEL_ADL_NHI1			0x466d
 #define PCI_DEVICE_ID_INTEL_ICL_NHI1			0x8a0d
 #define PCI_DEVICE_ID_INTEL_ICL_NHI0			0x8a17
 #define PCI_DEVICE_ID_INTEL_TGL_NHI0			0x9a1b

drivers/thunderbolt/nvm.c

@@ -164,6 +164,101 @@ void tb_nvm_free(struct tb_nvm *nvm)
 	kfree(nvm);
 }
 
+/**
+ * tb_nvm_read_data() - Read data from NVM
+ * @address: Start address on the flash
+ * @buf: Buffer where the read data is copied
+ * @size: Size of the buffer in bytes
+ * @retries: Number of retries if block read fails
+ * @read_block: Function that reads block from the flash
+ * @read_block_data: Data passsed to @read_block
+ *
+ * This is a generic function that reads data from NVM or NVM like
+ * device.
+ *
+ * Returns %0 on success and negative errno otherwise.
+ */
+int tb_nvm_read_data(unsigned int address, void *buf, size_t size,
+		     unsigned int retries, read_block_fn read_block,
+		     void *read_block_data)
+{
+	do {
+		unsigned int dwaddress, dwords, offset;
+		u8 data[NVM_DATA_DWORDS * 4];
+		size_t nbytes;
+		int ret;
+
+		offset = address & 3;
+		nbytes = min_t(size_t, size + offset, NVM_DATA_DWORDS * 4);
+
+		dwaddress = address / 4;
+		dwords = ALIGN(nbytes, 4) / 4;
+
+		ret = read_block(read_block_data, dwaddress, data, dwords);
+		if (ret) {
+			if (ret != -ENODEV && retries--)
+				continue;
+			return ret;
+		}
+
+		nbytes -= offset;
+		memcpy(buf, data + offset, nbytes);
+
+		size -= nbytes;
+		address += nbytes;
+		buf += nbytes;
+	} while (size > 0);
+
+	return 0;
+}
+
+/**
+ * tb_nvm_write_data() - Write data to NVM
+ * @address: Start address on the flash
+ * @buf: Buffer where the data is copied from
+ * @size: Size of the buffer in bytes
+ * @retries: Number of retries if the block write fails
+ * @write_block: Function that writes block to the flash
+ * @write_block_data: Data passwd to @write_block
+ *
+ * This is generic function that writes data to NVM or NVM like device.
+ *
+ * Returns %0 on success and negative errno otherwise.
+ */
+int tb_nvm_write_data(unsigned int address, const void *buf, size_t size,
+		      unsigned int retries, write_block_fn write_block,
+		      void *write_block_data)
+{
+	do {
+		unsigned int offset, dwaddress;
+		u8 data[NVM_DATA_DWORDS * 4];
+		size_t nbytes;
+		int ret;
+
+		offset = address & 3;
+		nbytes = min_t(u32, size + offset, NVM_DATA_DWORDS * 4);
+
+		memcpy(data + offset, buf, nbytes);
+
+		dwaddress = address / 4;
+		ret = write_block(write_block_data, dwaddress, data, nbytes / 4);
+		if (ret) {
+			if (ret == -ETIMEDOUT) {
+				if (retries--)
+					continue;
+				ret = -EIO;
+			}
+			return ret;
+		}
+
+		size -= nbytes;
+		address += nbytes;
+		buf += nbytes;
+	} while (size > 0);
+
+	return 0;
+}
+
 void tb_nvm_exit(void)
 {
 	ida_destroy(&nvm_ida);

drivers/thunderbolt/path.c

@@ -367,7 +367,7 @@ static void __tb_path_deallocate_nfc(struct tb_path *path, int first_hop)
 	int i, res;
 	for (i = first_hop; i < path->path_length; i++) {
 		res = tb_port_add_nfc_credits(path->hops[i].in_port,
-					      -path->nfc_credits);
+					      -path->hops[i].nfc_credits);
 		if (res)
 			tb_port_warn(path->hops[i].in_port,
 				     "nfc credits deallocation failed for hop %d\n",
@@ -502,7 +502,7 @@ int tb_path_activate(struct tb_path *path)
 	/* Add non flow controlled credits. */
 	for (i = path->path_length - 1; i >= 0; i--) {
 		res = tb_port_add_nfc_credits(path->hops[i].in_port,
-					      path->nfc_credits);
+					      path->hops[i].nfc_credits);
 		if (res) {
 			__tb_path_deallocate_nfc(path, i);
 			goto err;

drivers/thunderbolt/quirks.c

@@ -12,7 +12,17 @@ static void quirk_force_power_link(struct tb_switch *sw)
 	sw->quirks |= QUIRK_FORCE_POWER_LINK_CONTROLLER;
 }
 
+static void quirk_dp_credit_allocation(struct tb_switch *sw)
+{
+	if (sw->credit_allocation && sw->min_dp_main_credits == 56) {
+		sw->min_dp_main_credits = 18;
+		tb_sw_dbg(sw, "quirked DP main: %u\n", sw->min_dp_main_credits);
+	}
+}
+
 struct tb_quirk {
+	u16 hw_vendor_id;
+	u16 hw_device_id;
 	u16 vendor;
 	u16 device;
 	void (*hook)(struct tb_switch *sw);
@@ -20,7 +30,13 @@ struct tb_quirk {
 
 static const struct tb_quirk tb_quirks[] = {
 	/* Dell WD19TB supports self-authentication on unplug */
-	{ 0x00d4, 0xb070, quirk_force_power_link },
+	{ 0x0000, 0x0000, 0x00d4, 0xb070, quirk_force_power_link },
+	{ 0x0000, 0x0000, 0x00d4, 0xb071, quirk_force_power_link },
+	/*
+	 * Intel Goshen Ridge NVM 27 and before report wrong number of
+	 * DP buffers.
+	 */
+	{ 0x8087, 0x0b26, 0x0000, 0x0000, quirk_dp_credit_allocation },
 };
 
 /**
@@ -36,7 +52,15 @@ void tb_check_quirks(struct tb_switch *sw)
 	for (i = 0; i < ARRAY_SIZE(tb_quirks); i++) {
 		const struct tb_quirk *q = &tb_quirks[i];
 
-		if (sw->device == q->device && sw->vendor == q->vendor)
-			q->hook(sw);
+		if (q->hw_vendor_id && q->hw_vendor_id != sw->config.vendor_id)
+			continue;
+		if (q->hw_device_id && q->hw_device_id != sw->config.device_id)
+			continue;
+		if (q->vendor && q->vendor != sw->vendor)
+			continue;
+		if (q->device && q->device != sw->device)
+			continue;
+
+		q->hook(sw);
 	}
 }

drivers/thunderbolt/retimer.c

@@ -103,6 +103,7 @@ static int tb_retimer_nvm_validate_and_write(struct tb_retimer *rt)
 	unsigned int image_size, hdr_size;
 	const u8 *buf = rt->nvm->buf;
 	u16 ds_size, device;
+	int ret;
 
 	image_size = rt->nvm->buf_data_size;
 	if (image_size < NVM_MIN_SIZE || image_size > NVM_MAX_SIZE)
@@ -140,8 +141,43 @@ static int tb_retimer_nvm_validate_and_write(struct tb_retimer *rt)
 	buf += hdr_size;
 	image_size -= hdr_size;
 
-	return usb4_port_retimer_nvm_write(rt->port, rt->index, 0, buf,
-					   image_size);
+	ret = usb4_port_retimer_nvm_write(rt->port, rt->index, 0, buf,
+					 image_size);
+	if (!ret)
+		rt->nvm->flushed = true;
+
+	return ret;
+}
+
+static int tb_retimer_nvm_authenticate(struct tb_retimer *rt, bool auth_only)
+{
+	u32 status;
+	int ret;
+
+	if (auth_only) {
+		ret = usb4_port_retimer_nvm_set_offset(rt->port, rt->index, 0);
+		if (ret)
+			return ret;
+	}
+
+	ret = usb4_port_retimer_nvm_authenticate(rt->port, rt->index);
+	if (ret)
+		return ret;
+
+	usleep_range(100, 150);
+
+	/*
+	 * Check the status now if we still can access the retimer. It
+	 * is expected that the below fails.
+	 */
+	ret = usb4_port_retimer_nvm_authenticate_status(rt->port, rt->index,
+							&status);
+	if (!ret) {
+		rt->auth_status = status;
+		return status ? -EINVAL : 0;
+	}
+
+	return 0;
 }
 
 static ssize_t device_show(struct device *dev, struct device_attribute *attr,
@@ -176,8 +212,7 @@ static ssize_t nvm_authenticate_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct tb_retimer *rt = tb_to_retimer(dev);
-	bool val;
-	int ret;
+	int val, ret;
 
 	pm_runtime_get_sync(&rt->dev);
 
@@ -191,7 +226,7 @@ static ssize_t nvm_authenticate_store(struct device *dev,
 		goto exit_unlock;
 	}
 
-	ret = kstrtobool(buf, &val);
+	ret = kstrtoint(buf, 10, &val);
 	if (ret)
 		goto exit_unlock;
 
@@ -199,16 +234,22 @@ static ssize_t nvm_authenticate_store(struct device *dev,
 	rt->auth_status = 0;
 
 	if (val) {
-		if (!rt->nvm->buf) {
-			ret = -EINVAL;
-			goto exit_unlock;
+		if (val == AUTHENTICATE_ONLY) {
+			ret = tb_retimer_nvm_authenticate(rt, true);
+		} else {
+			if (!rt->nvm->flushed) {
+				if (!rt->nvm->buf) {
+					ret = -EINVAL;
+					goto exit_unlock;
+				}
+
+				ret = tb_retimer_nvm_validate_and_write(rt);
+				if (ret || val == WRITE_ONLY)
+					goto exit_unlock;
+			}
+			if (val == WRITE_AND_AUTHENTICATE)
+				ret = tb_retimer_nvm_authenticate(rt, false);
 		}
-
-		ret = tb_retimer_nvm_validate_and_write(rt);
-		if (ret)
-			goto exit_unlock;
-
-		ret = usb4_port_retimer_nvm_authenticate(rt->port, rt->index);
 	}
 
 exit_unlock:
@@ -283,11 +324,13 @@ struct device_type tb_retimer_type = {
 
 static int tb_retimer_add(struct tb_port *port, u8 index, u32 auth_status)
 {
+	struct usb4_port *usb4;
 	struct tb_retimer *rt;
 	u32 vendor, device;
 	int ret;
 
-	if (!port->cap_usb4)
+	usb4 = port->usb4;
+	if (!usb4)
 		return -EINVAL;
 
 	ret = usb4_port_retimer_read(port, index, USB4_SB_VENDOR_ID, &vendor,
@@ -331,7 +374,7 @@ static int tb_retimer_add(struct tb_port *port, u8 index, u32 auth_status)
 	rt->port = port;
 	rt->tb = port->sw->tb;
 
-	rt->dev.parent = &port->sw->dev;
+	rt->dev.parent = &usb4->dev;
 	rt->dev.bus = &tb_bus_type;
 	rt->dev.type = &tb_retimer_type;
 	dev_set_name(&rt->dev, "%s:%u.%u", dev_name(&port->sw->dev),
@@ -389,7 +432,7 @@ static struct tb_retimer *tb_port_find_retimer(struct tb_port *port, u8 index)
 	struct tb_retimer_lookup lookup = { .port = port, .index = index };
 	struct device *dev;
 
-	dev = device_find_child(&port->sw->dev, &lookup, retimer_match);
+	dev = device_find_child(&port->usb4->dev, &lookup, retimer_match);
 	if (dev)
 		return tb_to_retimer(dev);
 
@@ -399,19 +442,18 @@ static struct tb_retimer *tb_port_find_retimer(struct tb_port *port, u8 index)
 /**
  * tb_retimer_scan() - Scan for on-board retimers under port
  * @port: USB4 port to scan
+ * @add: If true also registers found retimers
  *
- * Tries to enumerate on-board retimers connected to @port. Found
- * retimers are registered as children of @port. Does not scan for cable
- * retimers for now.
+ * Brings the sideband into a state where retimers can be accessed.
+ * Then Tries to enumerate on-board retimers connected to @port. Found
+ * retimers are registered as children of @port if @add is set.  Does
+ * not scan for cable retimers for now.
  */
-int tb_retimer_scan(struct tb_port *port)
+int tb_retimer_scan(struct tb_port *port, bool add)
 {
 	u32 status[TB_MAX_RETIMER_INDEX + 1] = {};
 	int ret, i, last_idx = 0;
 
-	if (!port->cap_usb4)
-		return 0;
-
 	/*
 	 * Send broadcast RT to make sure retimer indices facing this
 	 * port are set.
@@ -420,6 +462,13 @@ int tb_retimer_scan(struct tb_port *port)
 	if (ret)
 		return ret;
 
+	/*
+	 * Enable sideband channel for each retimer. We can do this
+	 * regardless whether there is device connected or not.
+	 */
+	for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++)
+		usb4_port_retimer_set_inbound_sbtx(port, i);
+
 	/*
 	 * Before doing anything else, read the authentication status.
 	 * If the retimer has it set, store it for the new retimer
@@ -451,10 +500,10 @@ int tb_retimer_scan(struct tb_port *port)
 		rt = tb_port_find_retimer(port, i);
 		if (rt) {
 			put_device(&rt->dev);
-		} else {
+		} else if (add) {
 			ret = tb_retimer_add(port, i, status[i]);
 			if (ret && ret != -EOPNOTSUPP)
-				return ret;
+				break;
 		}
 	}
 
@@ -479,7 +528,10 @@ static int remove_retimer(struct device *dev, void *data)
  */
 void tb_retimer_remove_all(struct tb_port *port)
 {
-	if (port->cap_usb4)
-		device_for_each_child_reverse(&port->sw->dev, port,
+	struct usb4_port *usb4;
+
+	usb4 = port->usb4;
+	if (usb4)
+		device_for_each_child_reverse(&usb4->dev, port,
 					      remove_retimer);
 }

drivers/thunderbolt/sb_regs.h

@@ -17,7 +17,9 @@
 enum usb4_sb_opcode {
 	USB4_SB_OPCODE_ERR = 0x20525245,			/* "ERR " */
 	USB4_SB_OPCODE_ONS = 0x444d4321,			/* "!CMD" */
+	USB4_SB_OPCODE_ROUTER_OFFLINE = 0x4e45534c,		/* "LSEN" */
 	USB4_SB_OPCODE_ENUMERATE_RETIMERS = 0x4d554e45,		/* "ENUM" */
+	USB4_SB_OPCODE_SET_INBOUND_SBTX = 0x5055534c,		/* "LSUP" */
 	USB4_SB_OPCODE_QUERY_LAST_RETIMER = 0x5453414c,		/* "LAST" */
 	USB4_SB_OPCODE_GET_NVM_SECTOR_SIZE = 0x53534e47,	/* "GNSS" */
 	USB4_SB_OPCODE_NVM_SET_OFFSET = 0x53504f42,		/* "BOPS" */

drivers/thunderbolt/tb.c

@@ -10,6 +10,7 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/pm_runtime.h>
+#include <linux/platform_data/x86/apple.h>
 
 #include "tb.h"
 #include "tb_regs.h"
@@ -595,7 +596,7 @@ static void tb_scan_port(struct tb_port *port)
 		return;
 	}
 
-	tb_retimer_scan(port);
+	tb_retimer_scan(port, true);
 
 	sw = tb_switch_alloc(port->sw->tb, &port->sw->dev,
 			     tb_downstream_route(port));
@@ -662,7 +663,7 @@ static void tb_scan_port(struct tb_port *port)
 		tb_sw_warn(sw, "failed to enable TMU\n");
 
 	/* Scan upstream retimers */
-	tb_retimer_scan(upstream_port);
+	tb_retimer_scan(upstream_port, true);
 
 	/*
 	 * Create USB 3.x tunnels only when the switch is plugged to the
@@ -1571,6 +1572,69 @@ static const struct tb_cm_ops tb_cm_ops = {
 	.disconnect_xdomain_paths = tb_disconnect_xdomain_paths,
 };
 
+/*
+ * During suspend the Thunderbolt controller is reset and all PCIe
+ * tunnels are lost. The NHI driver will try to reestablish all tunnels
+ * during resume. This adds device links between the tunneled PCIe
+ * downstream ports and the NHI so that the device core will make sure
+ * NHI is resumed first before the rest.
+ */
+static void tb_apple_add_links(struct tb_nhi *nhi)
+{
+	struct pci_dev *upstream, *pdev;
+
+	if (!x86_apple_machine)
+		return;
+
+	switch (nhi->pdev->device) {
+	case PCI_DEVICE_ID_INTEL_LIGHT_RIDGE:
+	case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C:
+	case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI:
+	case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI:
+		break;
+	default:
+		return;
+	}
+
+	upstream = pci_upstream_bridge(nhi->pdev);
+	while (upstream) {
+		if (!pci_is_pcie(upstream))
+			return;
+		if (pci_pcie_type(upstream) == PCI_EXP_TYPE_UPSTREAM)
+			break;
+		upstream = pci_upstream_bridge(upstream);
+	}
+
+	if (!upstream)
+		return;
+
+	/*
+	 * For each hotplug downstream port, create add device link
+	 * back to NHI so that PCIe tunnels can be re-established after
+	 * sleep.
+	 */
+	for_each_pci_bridge(pdev, upstream->subordinate) {
+		const struct device_link *link;
+
+		if (!pci_is_pcie(pdev))
+			continue;
+		if (pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM ||
+		    !pdev->is_hotplug_bridge)
+			continue;
+
+		link = device_link_add(&pdev->dev, &nhi->pdev->dev,
+				       DL_FLAG_AUTOREMOVE_SUPPLIER |
+				       DL_FLAG_PM_RUNTIME);
+		if (link) {
+			dev_dbg(&nhi->pdev->dev, "created link from %s\n",
+				dev_name(&pdev->dev));
+		} else {
+			dev_warn(&nhi->pdev->dev, "device link creation from %s failed\n",
+				 dev_name(&pdev->dev));
+		}
+	}
+}
+
 struct tb *tb_probe(struct tb_nhi *nhi)
 {
 	struct tb_cm *tcm;
@@ -1594,5 +1658,8 @@ struct tb *tb_probe(struct tb_nhi *nhi)
 
 	tb_dbg(tb, "using software connection manager\n");
 
+	tb_apple_add_links(nhi);
+	tb_acpi_add_links(nhi);
+
 	return tb;
 }

drivers/thunderbolt/tb_regs.h

@@ -195,6 +195,7 @@ struct tb_regs_switch_header {
 #define ROUTER_CS_5_SLP				BIT(0)
 #define ROUTER_CS_5_WOP				BIT(1)
 #define ROUTER_CS_5_WOU				BIT(2)
+#define ROUTER_CS_5_WOD				BIT(3)
 #define ROUTER_CS_5_C3S				BIT(23)
 #define ROUTER_CS_5_PTO				BIT(24)
 #define ROUTER_CS_5_UTO				BIT(25)
@@ -228,6 +229,7 @@ enum usb4_switch_op {
 	USB4_SWITCH_OP_NVM_SET_OFFSET = 0x23,
 	USB4_SWITCH_OP_DROM_READ = 0x24,
 	USB4_SWITCH_OP_NVM_SECTOR_SIZE = 0x25,
+	USB4_SWITCH_OP_BUFFER_ALLOC = 0x33,
 };
 
 /* Router TMU configuration */
@@ -458,6 +460,8 @@ struct tb_regs_hop {
 #define TB_LC_SX_CTRL			0x96
 #define TB_LC_SX_CTRL_WOC		BIT(1)
 #define TB_LC_SX_CTRL_WOD		BIT(2)
+#define TB_LC_SX_CTRL_WODPC		BIT(3)
+#define TB_LC_SX_CTRL_WODPD		BIT(4)
 #define TB_LC_SX_CTRL_WOU4		BIT(5)
 #define TB_LC_SX_CTRL_WOP		BIT(6)
 #define TB_LC_SX_CTRL_L1C		BIT(16)

drivers/thunderbolt/tunnel.h

@@ -27,6 +27,7 @@ enum tb_tunnel_type {
  * @paths: All paths required by the tunnel
  * @npaths: Number of paths in @paths
  * @init: Optional tunnel specific initialization
+ * @deinit: Optional tunnel specific de-initialization
  * @activate: Optional tunnel specific activation/deactivation
  * @consumed_bandwidth: Return how much bandwidth the tunnel consumes
  * @release_unused_bandwidth: Release all unused bandwidth
@@ -47,6 +48,7 @@ struct tb_tunnel {
 	struct tb_path **paths;
 	size_t npaths;
 	int (*init)(struct tb_tunnel *tunnel);
+	void (*deinit)(struct tb_tunnel *tunnel);
 	int (*activate)(struct tb_tunnel *tunnel, bool activate);
 	int (*consumed_bandwidth)(struct tb_tunnel *tunnel, int *consumed_up,
 				  int *consumed_down);

drivers/thunderbolt/xdomain.c

@@ -1527,6 +1527,13 @@ int tb_xdomain_lane_bonding_enable(struct tb_xdomain *xd)
 		return ret;
 	}
 
+	ret = tb_port_wait_for_link_width(port, 2, 100);
+	if (ret) {
+		tb_port_warn(port, "timeout enabling lane bonding\n");
+		return ret;
+	}
+
+	tb_port_update_credits(port);
 	tb_xdomain_update_link_attributes(xd);
 
 	dev_dbg(&xd->dev, "lane bonding enabled\n");
@@ -1548,7 +1555,10 @@ void tb_xdomain_lane_bonding_disable(struct tb_xdomain *xd)
 	port = tb_port_at(xd->route, tb_xdomain_parent(xd));
 	if (port->dual_link_port) {
 		tb_port_lane_bonding_disable(port);
+		if (tb_port_wait_for_link_width(port, 1, 100) == -ETIMEDOUT)
+			tb_port_warn(port, "timeout disabling lane bonding\n");
 		tb_port_disable(port->dual_link_port);
+		tb_port_update_credits(port);
 		tb_xdomain_update_link_attributes(xd);
 
 		dev_dbg(&xd->dev, "lane bonding disabled\n");

drivers/usb/atm/cxacru.c

@@ -180,7 +180,7 @@ struct cxacru_data {
 	struct mutex poll_state_serialize;
 	enum cxacru_poll_state poll_state;
 
-	/* contol handles */
+	/* control handles */
 	struct mutex cm_serialize;
 	u8 *rcv_buf;
 	u8 *snd_buf;

drivers/usb/cdns3/cdns3-ep0.c

@@ -677,7 +677,7 @@ static int cdns3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
 }
 
 /**
- * cdns3_gadget_ep0_queue Transfer data on endpoint zero
+ * cdns3_gadget_ep0_queue - Transfer data on endpoint zero
  * @ep: pointer to endpoint zero object
  * @request: pointer to request object
  * @gfp_flags: gfp flags
@@ -772,7 +772,7 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
 }
 
 /**
- * cdns3_gadget_ep_set_wedge Set wedge on selected endpoint
+ * cdns3_gadget_ep_set_wedge - Set wedge on selected endpoint
  * @ep: endpoint object
  *
  * Returns 0
@@ -865,7 +865,7 @@ void cdns3_ep0_config(struct cdns3_device *priv_dev)
 }
 
 /**
- * cdns3_init_ep0 Initializes software endpoint 0 of gadget
+ * cdns3_init_ep0 - Initializes software endpoint 0 of gadget
  * @priv_dev: extended gadget object
  * @priv_ep: extended endpoint object
  *

drivers/usb/cdns3/cdns3-gadget.c

@@ -155,7 +155,7 @@ static struct cdns3_request *cdns3_next_priv_request(struct list_head *list)
 }
 
 /**
- * select_ep - selects endpoint
+ * cdns3_select_ep - selects endpoint
  * @priv_dev:  extended gadget object
  * @ep: endpoint address
  */
@@ -430,9 +430,7 @@ static int cdns3_start_all_request(struct cdns3_device *priv_dev,
 		if (ret)
 			return ret;
 
-		list_del(&request->list);
-		list_add_tail(&request->list,
-			      &priv_ep->pending_req_list);
+		list_move_tail(&request->list, &priv_ep->pending_req_list);
 		if (request->stream_id != 0 || (priv_ep->flags & EP_TDLCHK_EN))
 			break;
 	}
@@ -484,7 +482,7 @@ static void __cdns3_descmiss_copy_data(struct usb_request *request,
 }
 
 /**
- * cdns3_wa2_descmiss_copy_data copy data from internal requests to
+ * cdns3_wa2_descmiss_copy_data - copy data from internal requests to
  * request queued by class driver.
  * @priv_ep: extended endpoint object
  * @request: request object
@@ -1835,7 +1833,7 @@ __must_hold(&priv_dev->lock)
 }
 
 /**
- * cdns3_device_irq_handler- interrupt handler for device part of controller
+ * cdns3_device_irq_handler - interrupt handler for device part of controller
  *
  * @irq: irq number for cdns3 core device
  * @data: structure of cdns3
@@ -1879,7 +1877,7 @@ static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
 }
 
 /**
- * cdns3_device_thread_irq_handler- interrupt handler for device part
+ * cdns3_device_thread_irq_handler - interrupt handler for device part
  * of controller
  *
  * @irq: irq number for cdns3 core device
@@ -2022,7 +2020,7 @@ static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
 }
 
 /**
- * cdns3_ep_config Configure hardware endpoint
+ * cdns3_ep_config - Configure hardware endpoint
  * @priv_ep: extended endpoint object
  * @enable: set EP_CFG_ENABLE bit in ep_cfg register.
  */
@@ -2221,7 +2219,7 @@ usb_ep *cdns3_gadget_match_ep(struct usb_gadget *gadget,
 }
 
 /**
- * cdns3_gadget_ep_alloc_request Allocates request
+ * cdns3_gadget_ep_alloc_request - Allocates request
  * @ep: endpoint object associated with request
  * @gfp_flags: gfp flags
  *
@@ -2244,7 +2242,7 @@ struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep,
 }
 
 /**
- * cdns3_gadget_ep_free_request Free memory occupied by request
+ * cdns3_gadget_ep_free_request - Free memory occupied by request
  * @ep: endpoint object associated with request
  * @request: request to free memory
  */
@@ -2261,7 +2259,7 @@ void cdns3_gadget_ep_free_request(struct usb_ep *ep,
 }
 
 /**
- * cdns3_gadget_ep_enable Enable endpoint
+ * cdns3_gadget_ep_enable - Enable endpoint
  * @ep: endpoint object
  * @desc: endpoint descriptor
  *
@@ -2396,7 +2394,7 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep,
 }
 
 /**
- * cdns3_gadget_ep_disable Disable endpoint
+ * cdns3_gadget_ep_disable - Disable endpoint
  * @ep: endpoint object
  *
  * Returns 0 on success, error code elsewhere
@@ -2486,7 +2484,7 @@ static int cdns3_gadget_ep_disable(struct usb_ep *ep)
 }
 
 /**
- * cdns3_gadget_ep_queue Transfer data on endpoint
+ * __cdns3_gadget_ep_queue - Transfer data on endpoint
  * @ep: endpoint object
  * @request: request object
  * @gfp_flags: gfp flags
@@ -2586,7 +2584,7 @@ static int cdns3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
 }
 
 /**
- * cdns3_gadget_ep_dequeue Remove request from transfer queue
+ * cdns3_gadget_ep_dequeue - Remove request from transfer queue
  * @ep: endpoint object associated with request
  * @request: request object
  *
@@ -2653,7 +2651,7 @@ int cdns3_gadget_ep_dequeue(struct usb_ep *ep,
 }
 
 /**
- * __cdns3_gadget_ep_set_halt Sets stall on selected endpoint
+ * __cdns3_gadget_ep_set_halt - Sets stall on selected endpoint
  * Should be called after acquiring spin_lock and selecting ep
  * @priv_ep: endpoint object to set stall on.
  */
@@ -2674,7 +2672,7 @@ void __cdns3_gadget_ep_set_halt(struct cdns3_endpoint *priv_ep)
 }
 
 /**
- * __cdns3_gadget_ep_clear_halt Clears stall on selected endpoint
+ * __cdns3_gadget_ep_clear_halt - Clears stall on selected endpoint
  * Should be called after acquiring spin_lock and selecting ep
  * @priv_ep: endpoint object to clear stall on
  */
@@ -2719,7 +2717,7 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
 }
 
 /**
- * cdns3_gadget_ep_set_halt Sets/clears stall on selected endpoint
+ * cdns3_gadget_ep_set_halt - Sets/clears stall on selected endpoint
  * @ep: endpoint object to set/clear stall on
  * @value: 1 for set stall, 0 for clear stall
  *
@@ -2765,7 +2763,7 @@ static const struct usb_ep_ops cdns3_gadget_ep_ops = {
 };
 
 /**
- * cdns3_gadget_get_frame Returns number of actual ITP frame
+ * cdns3_gadget_get_frame - Returns number of actual ITP frame
  * @gadget: gadget object
  *
  * Returns number of actual ITP frame
@@ -2874,7 +2872,7 @@ static void cdns3_gadget_config(struct cdns3_device *priv_dev)
 }
 
 /**
- * cdns3_gadget_udc_start Gadget start
+ * cdns3_gadget_udc_start - Gadget start
  * @gadget: gadget object
  * @driver: driver which operates on this gadget
  *
@@ -2920,7 +2918,7 @@ static int cdns3_gadget_udc_start(struct usb_gadget *gadget,
 }
 
 /**
- * cdns3_gadget_udc_stop Stops gadget
+ * cdns3_gadget_udc_stop - Stops gadget
  * @gadget: gadget object
  *
  * Returns 0
@@ -2983,7 +2981,7 @@ static void cdns3_free_all_eps(struct cdns3_device *priv_dev)
 }
 
 /**
- * cdns3_init_eps Initializes software endpoints of gadget
+ * cdns3_init_eps - Initializes software endpoints of gadget
  * @priv_dev: extended gadget object
  *
  * Returns 0 on success, error code elsewhere

drivers/usb/cdns3/cdns3-imx.c

 // SPDX-License-Identifier: GPL-2.0
-/**
+/*
  * cdns3-imx.c - NXP i.MX specific Glue layer for Cadence USB Controller
  *
  * Copyright (C) 2019 NXP

drivers/usb/cdns3/cdns3-ti.c

 // SPDX-License-Identifier: GPL-2.0
-/**
+/*
  * cdns3-ti.c - TI specific Glue layer for Cadence USB Controller
  *
  * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com