CRIS v32: remove I2C bitbanging driver

Now that we have a gpiolib GPIO driver, the generic i2c-gpio driver
provides this functionality.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

arch/cris/arch-v32/drivers/Kconfig

@@ -149,24 +149,6 @@ config ETRAX_NANDBOOT
 	  Say Y if your boot code, kernel and root file system is in
 	  NAND flash. Say N if they are in NOR flash.
 
-config ETRAX_I2C
-	bool "I2C driver"
-	depends on ETRAX_ARCH_V32
-	help
-	  This option enables the I2C driver used by e.g. the RTC driver.
-
-config ETRAX_V32_I2C_DATA_PORT
-	string "I2C data pin"
-	depends on ETRAX_I2C
-	help
-	  The pin to use for I2C data.
-
-config ETRAX_V32_I2C_CLK_PORT
-	string "I2C clock pin"
-	depends on ETRAX_I2C
-	help
-	  The pin to use for I2C clock.
-
 config ETRAX_GPIO
 	bool "GPIO support"
 	depends on ETRAX_ARCH_V32

arch/cris/arch-v32/drivers/Makefile

@@ -7,6 +7,5 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP)        += axisflashmap.o
 obj-$(CONFIG_ETRAXFS)                   += mach-fs/
 obj-$(CONFIG_CRIS_MACH_ARTPEC3)         += mach-a3/
 obj-$(CONFIG_ETRAX_IOP_FW_LOAD)         += iop_fw_load.o
-obj-$(CONFIG_ETRAX_I2C)			+= i2c.o
 obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL)	+= sync_serial.o
 obj-$(CONFIG_PCI)			+= pci/

arch/cris/arch-v32/drivers/i2c.h

-
-#include <linux/init.h>
-
-/* High level I2C actions */
-int i2c_write(unsigned char theSlave, void *data, size_t nbytes);
-int i2c_read(unsigned char theSlave, void *data, size_t nbytes);
-int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
-unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
-
-/* Low level I2C */
-void i2c_start(void);
-void i2c_stop(void);
-void i2c_outbyte(unsigned char x);
-unsigned char i2c_inbyte(void);
-int i2c_getack(void);
-void i2c_sendack(void);