Merge branch 'pm-opp'

Merge OPP (Operating Performance Points) changes for 5.18-rc1.

* pm-opp:
  Documentation: EM: Describe new registration method using DT
  OPP: Add support of "opp-microwatt" for EM registration
  PM: EM: add macro to set .active_power() callback conditionally
  OPP: Add "opp-microwatt" supporting code
  dt-bindings: opp: Add "opp-microwatt" entry in the OPP
  dt-bindings: power: avs: qcom,cpr: Convert to DT schema
  arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables
  arm64: dts: qcom: msm8996: Rename cluster OPP tables
  dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema
  dt-bindings: opp: qcom-opp: Convert to DT schema
  arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible
  dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles
  opp: Expose of-node's name in debugfs

Documentation/devicetree/bindings/arm/qcom.yaml

@@ -172,7 +172,21 @@ properties:
           - const: qcom,apq8094
 
       - items:
-          - const: qcom,msm8996-mtp
+          - enum:
+              - arrow,apq8096-db820c
+              - inforce,ifc6640
+          - const: qcom,apq8096-sbc
+          - const: qcom,apq8096
+
+      - items:
+          - enum:
+              - qcom,msm8996-mtp
+              - sony,dora-row
+              - sony,kagura-row
+              - sony,keyaki-row
+              - xiaomi,gemini
+              - xiaomi,scorpio
+          - const: qcom,msm8996
 
       - items:
           - enum:

Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM CPUFreq bindings
+
+maintainers:
+  - Ilia Lin <ilia.lin@kernel.org>
+
+description: |
+  In certain Qualcomm Technologies, Inc. SoCs such as QCS404, The CPU supply
+  voltage is dynamically configured by Core Power Reduction (CPR) depending on
+  current CPU frequency and efuse values.
+  CPR provides a power domain with multiple levels that are selected depending
+  on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level
+  according to the required OPPs defined in the CPU OPP tables.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,qcs404
+  required:
+    - compatible
+
+properties:
+  cpus:
+    type: object
+
+    patternProperties:
+      'cpu@[0-9a-f]+':
+        type: object
+
+        properties:
+          power-domains:
+            maxItems: 1
+
+          power-domain-names:
+            items:
+              - const: cpr
+
+        required:
+          - power-domains
+          - power-domain-names
+
+patternProperties:
+  '^opp-table(-[a-z0-9]+)?$':
+    if:
+      properties:
+        compatible:
+          const: operating-points-v2-kryo-cpu
+    then:
+      patternProperties:
+        '^opp-?[0-9]+$':
+          required:
+            - required-opps
+
+additionalProperties: true
+
+examples:
+  - |
+    / {
+        model = "Qualcomm Technologies, Inc. QCS404";
+        compatible = "qcom,qcs404";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            CPU0: cpu@100 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x100>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU1: cpu@101 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x101>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU2: cpu@102 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x102>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU3: cpu@103 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x103>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+        };
+
+        cpu_opp_table: opp-table-cpu {
+            compatible = "operating-points-v2-kryo-cpu";
+            opp-shared;
+
+            opp-1094400000 {
+                opp-hz = /bits/ 64 <1094400000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1248000000 {
+                opp-hz = /bits/ 64 <1248000000>;
+                required-opps = <&cpr_opp2>;
+            };
+            opp-1401600000 {
+                opp-hz = /bits/ 64 <1401600000>;
+                required-opps = <&cpr_opp3>;
+            };
+        };
+
+        cpr_opp_table: opp-table-cpr {
+            compatible = "operating-points-v2-qcom-level";
+
+            cpr_opp1: opp1 {
+                opp-level = <1>;
+                qcom,opp-fuse-level = <1>;
+            };
+            cpr_opp2: opp2 {
+                opp-level = <2>;
+                qcom,opp-fuse-level = <2>;
+            };
+            cpr_opp3: opp3 {
+                opp-level = <3>;
+                qcom,opp-fuse-level = <3>;
+            };
+        };
+    };

Documentation/devicetree/bindings/opp/opp-v2-base.yaml

@@ -93,6 +93,21 @@ patternProperties:
         minItems: 1
         maxItems: 8   # Should be enough regulators
 
+      opp-microwatt:
+        description: |
+          The power for the OPP in micro-Watts.
+
+          Entries for multiple regulators shall be provided in the same field
+          separated by angular brackets <>. If current values aren't required
+          for a regulator, then it shall be filled with 0. If power values
+          aren't required for any of the regulators, then this field is not
+          required. The OPP binding doesn't provide any provisions to relate the
+          values to their power supplies or the order in which the supplies need
+          to be configured and that is left for the implementation specific
+          binding.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
       opp-level:
         description:
           A value representing the performance level of the device.
@@ -203,6 +218,14 @@ patternProperties:
         minItems: 1
         maxItems: 8   # Should be enough regulators
 
+      '^opp-microwatt':
+        description:
+          Named opp-microwatt property. Similar to opp-microamp property,
+          but for microwatt instead.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
     dependencies:
       opp-avg-kBps: [ opp-peak-kBps ]
 

Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM OPP bindings
+
+maintainers:
+  - Ilia Lin <ilia.lin@kernel.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+description: |
+  In certain Qualcomm Technologies, Inc. SoCs like APQ8096 and MSM8996,
+  the CPU frequencies subset and voltage value of each OPP varies based on
+  the silicon variant in use.
+  Qualcomm Technologies, Inc. Process Voltage Scaling Tables
+  defines the voltage and frequency value based on the msm-id in SMEM
+  and speedbin blown in the efuse combination.
+  The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC
+  to provide the OPP framework with required information (existing HW bitmap).
+  This is used to determine the voltage and frequency value for each OPP of
+  operating-points-v2 table when it is parsed by the OPP framework.
+
+properties:
+  compatible:
+    const: operating-points-v2-kryo-cpu
+
+  nvmem-cells:
+    description: |
+      A phandle pointing to a nvmem-cells node representing the
+      efuse registers that has information about the
+      speedbin that is used to select the right frequency/voltage
+      value pair.
+
+  opp-shared: true
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+
+    properties:
+      opp-hz: true
+
+      opp-microvolt: true
+
+      opp-supported-hw:
+        description: |
+          A single 32 bit bitmap value, representing compatible HW.
+          Bitmap:
+          0:  MSM8996 V3, speedbin 0
+          1:  MSM8996 V3, speedbin 1
+          2:  MSM8996 V3, speedbin 2
+          3:  unused
+          4:  MSM8996 SG, speedbin 0
+          5:  MSM8996 SG, speedbin 1
+          6:  MSM8996 SG, speedbin 2
+          7-31:  unused
+        maximum: 0x77
+
+      clock-latency-ns: true
+
+      required-opps: true
+
+    required:
+      - opp-hz
+
+required:
+  - compatible
+
+if:
+  required:
+    - nvmem-cells
+then:
+  patternProperties:
+    '^opp-?[0-9]+$':
+      required:
+        - opp-supported-hw
+
+additionalProperties: false
+
+examples:
+  - |
+    / {
+        model = "Qualcomm Technologies, Inc. DB820c";
+        compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cpus {
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            CPU0: cpu@0 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x0>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 0>;
+                operating-points-v2 = <&cluster0_opp>;
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_0>;
+                L2_0: l2-cache {
+                    compatible = "cache";
+                    cache-level = <2>;
+                };
+            };
+
+            CPU1: cpu@1 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x1>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 0>;
+                operating-points-v2 = <&cluster0_opp>;
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_0>;
+            };
+
+            CPU2: cpu@100 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x100>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 1>;
+                operating-points-v2 = <&cluster1_opp>;
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_1>;
+                L2_1: l2-cache {
+                    compatible = "cache";
+                    cache-level = <2>;
+                };
+            };
+
+            CPU3: cpu@101 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x101>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 1>;
+                operating-points-v2 = <&cluster1_opp>;
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_1>;
+            };
+
+            cpu-map {
+                cluster0 {
+                    core0 {
+                        cpu = <&CPU0>;
+                    };
+
+                    core1 {
+                        cpu = <&CPU1>;
+                    };
+                };
+
+                cluster1 {
+                    core0 {
+                        cpu = <&CPU2>;
+                    };
+
+                    core1 {
+                        cpu = <&CPU3>;
+                    };
+                };
+            };
+        };
+
+        cluster0_opp: opp-table-0 {
+            compatible = "operating-points-v2-kryo-cpu";
+            nvmem-cells = <&speedbin_efuse>;
+            opp-shared;
+
+            opp-307200000 {
+                opp-hz = /bits/ 64 <307200000>;
+                opp-microvolt = <905000 905000 1140000>;
+                opp-supported-hw = <0x77>;
+                clock-latency-ns = <200000>;
+            };
+            opp-1593600000 {
+                opp-hz = /bits/ 64 <1593600000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x71>;
+                clock-latency-ns = <200000>;
+            };
+            opp-2188800000 {
+                opp-hz = /bits/ 64 <2188800000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x10>;
+                clock-latency-ns = <200000>;
+            };
+        };
+
+        cluster1_opp: opp-table-1 {
+            compatible = "operating-points-v2-kryo-cpu";
+            nvmem-cells = <&speedbin_efuse>;
+            opp-shared;
+
+            opp-307200000 {
+                opp-hz = /bits/ 64 <307200000>;
+                opp-microvolt = <905000 905000 1140000>;
+                opp-supported-hw = <0x77>;
+                clock-latency-ns = <200000>;
+            };
+            opp-1593600000 {
+                opp-hz = /bits/ 64 <1593600000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x70>;
+                clock-latency-ns = <200000>;
+            };
+            opp-2150400000 {
+                opp-hz = /bits/ 64 <2150400000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x31>;
+                clock-latency-ns = <200000>;
+            };
+            opp-2342400000 {
+                opp-hz = /bits/ 64 <2342400000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x10>;
+                clock-latency-ns = <200000>;
+            };
+        };
+
+        smem {
+            compatible = "qcom,smem";
+            memory-region = <&smem_mem>;
+            hwlocks = <&tcsr_mutex 3>;
+        };
+
+        soc {
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            qfprom: qfprom@74000 {
+                compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
+                reg = <0x00074000 0x8ff>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                speedbin_efuse: speedbin@133 {
+                    reg = <0x133 0x1>;
+                    bits = <5 3>;
+                };
+            };
+        };
+    };

Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm OPP bindings to describe OPP nodes.
+
+maintainers:
+  - Niklas Cassel <nks@flawful.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: operating-points-v2-qcom-level
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+
+    properties:
+      opp-level: true
+
+      qcom,opp-fuse-level:
+        description: |
+          A positive value representing the fuse corner/level associated with
+          this OPP node. Sometimes several corners/levels shares a certain fuse
+          corner/level. A fuse corner/level contains e.g. ref uV, min uV,
+          and max uV.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - opp-level
+      - qcom,opp-fuse-level
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    cpr_opp_table: opp-table-cpr {
+        compatible = "operating-points-v2-qcom-level";
+
+        cpr_opp1: opp1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+        };
+        cpr_opp2: opp2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+        };
+        cpr_opp3: opp3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <3>;
+        };
+    };

Documentation/devicetree/bindings/opp/qcom-opp.txt

-Qualcomm OPP bindings to describe OPP nodes
-
-The bindings are based on top of the operating-points-v2 bindings
-described in Documentation/devicetree/bindings/opp/opp-v2-base.yaml
-Additional properties are described below.
-
-* OPP Table Node
-
-Required properties:
-- compatible: Allow OPPs to express their compatibility. It should be:
-  "operating-points-v2-qcom-level"
-
-* OPP Node
-
-Required properties:
-- qcom,opp-fuse-level: A positive value representing the fuse corner/level
-  associated with this OPP node. Sometimes several corners/levels shares
-  a certain fuse corner/level. A fuse corner/level contains e.g. ref uV,
-  min uV, and max uV.

Documentation/devicetree/bindings/power/avs/qcom,cpr.txt

-QCOM CPR (Core Power Reduction)
-
-CPR (Core Power Reduction) is a technology to reduce core power on a CPU
-or other device. Each OPP of a device corresponds to a "corner" that has
-a range of valid voltages for a particular frequency. While the device is
-running at a particular frequency, CPR monitors dynamic factors such as
-temperature, etc. and suggests adjustments to the voltage to save power
-and meet silicon characteristic requirements.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address and size of the rbcpr register region
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the CPR interrupt
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: phandle to the reference clock
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "ref"
-
-- vdd-apc-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: phandle to the vdd-apc-supply regulator
-
-- #power-domain-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: should be 0
-
-- operating-points-v2:
-	Usage: required
-	Value type: <phandle>
-	Definition: A phandle to the OPP table containing the
-		    performance states supported by the CPR
-		    power domain
-
-- acc-syscon:
-	Usage: optional
-	Value type: <phandle>
-	Definition: phandle to syscon for writing ACC settings
-
-- nvmem-cells:
-	Usage: required
-	Value type: <phandle>
-	Definition: phandle to nvmem cells containing the data
-		    that makes up a fuse corner, for each fuse corner.
-		    As well as the CPR fuse revision.
-
-- nvmem-cell-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2",
-		    "cpr_quotient_offset3", "cpr_init_voltage1",
-		    "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1",
-		    "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1",
-		    "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision"
-		    for qcs404.
-
-Example:
-
-	cpr_opp_table: cpr-opp-table {
-		compatible = "operating-points-v2-qcom-level";
-
-		cpr_opp1: opp1 {
-			opp-level = <1>;
-			qcom,opp-fuse-level = <1>;
-		};
-		cpr_opp2: opp2 {
-			opp-level = <2>;
-			qcom,opp-fuse-level = <2>;
-		};
-		cpr_opp3: opp3 {
-			opp-level = <3>;
-			qcom,opp-fuse-level = <3>;
-		};
-	};
-
-	power-controller@b018000 {
-		compatible = "qcom,qcs404-cpr", "qcom,cpr";
-		reg = <0x0b018000 0x1000>;
-		interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&xo_board>;
-		clock-names = "ref";
-		vdd-apc-supply = <&pms405_s3>;
-		#power-domain-cells = <0>;
-		operating-points-v2 = <&cpr_opp_table>;
-		acc-syscon = <&tcsr>;
-
-		nvmem-cells = <&cpr_efuse_quot_offset1>,
-			<&cpr_efuse_quot_offset2>,
-			<&cpr_efuse_quot_offset3>,
-			<&cpr_efuse_init_voltage1>,
-			<&cpr_efuse_init_voltage2>,
-			<&cpr_efuse_init_voltage3>,
-			<&cpr_efuse_quot1>,
-			<&cpr_efuse_quot2>,
-			<&cpr_efuse_quot3>,
-			<&cpr_efuse_ring1>,
-			<&cpr_efuse_ring2>,
-			<&cpr_efuse_ring3>,
-			<&cpr_efuse_revision>;
-		nvmem-cell-names = "cpr_quotient_offset1",
-			"cpr_quotient_offset2",
-			"cpr_quotient_offset3",
-			"cpr_init_voltage1",
-			"cpr_init_voltage2",
-			"cpr_init_voltage3",
-			"cpr_quotient1",
-			"cpr_quotient2",
-			"cpr_quotient3",
-			"cpr_ring_osc1",
-			"cpr_ring_osc2",
-			"cpr_ring_osc3",
-			"cpr_fuse_revision";
-	};

Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Core Power Reduction (CPR) bindings
+
+maintainers:
+  - Niklas Cassel <nks@flawful.org>
+
+description: |
+  CPR (Core Power Reduction) is a technology to reduce core power on a CPU
+  or other device. Each OPP of a device corresponds to a "corner" that has
+  a range of valid voltages for a particular frequency. While the device is
+  running at a particular frequency, CPR monitors dynamic factors such as
+  temperature, etc. and suggests adjustments to the voltage to save power
+  and meet silicon characteristic requirements.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,qcs404-cpr
+      - const: qcom,cpr
+
+  reg:
+    description: Base address and size of the RBCPR register region.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference clock.
+
+  clock-names:
+    items:
+      - const: ref
+
+  vdd-apc-supply:
+    description: APC regulator supply.
+
+  '#power-domain-cells':
+    const: 0
+
+  operating-points-v2:
+    description: |
+      A phandle to the OPP table containing the performance states
+      supported by the CPR power domain.
+
+  acc-syscon:
+    description: A phandle to the syscon used for writing ACC settings.
+
+  nvmem-cells:
+    items:
+      - description: Corner 1 quotient offset
+      - description: Corner 2 quotient offset
+      - description: Corner 3 quotient offset
+      - description: Corner 1 initial voltage
+      - description: Corner 2 initial voltage
+      - description: Corner 3 initial voltage
+      - description: Corner 1 quotient
+      - description: Corner 2 quotient
+      - description: Corner 3 quotient
+      - description: Corner 1 ring oscillator
+      - description: Corner 2 ring oscillator
+      - description: Corner 3 ring oscillator
+      - description: Fuse revision
+
+  nvmem-cell-names:
+    items:
+      - const: cpr_quotient_offset1
+      - const: cpr_quotient_offset2
+      - const: cpr_quotient_offset3
+      - const: cpr_init_voltage1
+      - const: cpr_init_voltage2
+      - const: cpr_init_voltage3
+      - const: cpr_quotient1
+      - const: cpr_quotient2
+      - const: cpr_quotient3
+      - const: cpr_ring_osc1
+      - const: cpr_ring_osc2
+      - const: cpr_ring_osc3
+      - const: cpr_fuse_revision
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vdd-apc-supply
+  - '#power-domain-cells'
+  - operating-points-v2
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cpr_opp_table: opp-table-cpr {
+        compatible = "operating-points-v2-qcom-level";
+
+        cpr_opp1: opp1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+        };
+        cpr_opp2: opp2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+        };
+        cpr_opp3: opp3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <3>;
+        };
+    };
+
+    power-controller@b018000 {
+        compatible = "qcom,qcs404-cpr", "qcom,cpr";
+        reg = <0x0b018000 0x1000>;
+        interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&xo_board>;
+        clock-names = "ref";
+        vdd-apc-supply = <&pms405_s3>;
+        #power-domain-cells = <0>;
+        operating-points-v2 = <&cpr_opp_table>;
+        acc-syscon = <&tcsr>;
+
+        nvmem-cells = <&cpr_efuse_quot_offset1>,
+            <&cpr_efuse_quot_offset2>,
+            <&cpr_efuse_quot_offset3>,
+            <&cpr_efuse_init_voltage1>,
+            <&cpr_efuse_init_voltage2>,
+            <&cpr_efuse_init_voltage3>,
+            <&cpr_efuse_quot1>,
+            <&cpr_efuse_quot2>,
+            <&cpr_efuse_quot3>,
+            <&cpr_efuse_ring1>,
+            <&cpr_efuse_ring2>,
+            <&cpr_efuse_ring3>,
+            <&cpr_efuse_revision>;
+        nvmem-cell-names = "cpr_quotient_offset1",
+            "cpr_quotient_offset2",
+            "cpr_quotient_offset3",
+            "cpr_init_voltage1",
+            "cpr_init_voltage2",
+            "cpr_init_voltage3",
+            "cpr_quotient1",
+            "cpr_quotient2",
+            "cpr_quotient3",
+            "cpr_ring_osc1",
+            "cpr_ring_osc2",
+            "cpr_ring_osc3",
+            "cpr_fuse_revision";
+    };

Documentation/power/energy-model.rst

@@ -113,6 +113,16 @@ to: return warning/error, stop working or panic.
 See Section 3. for an example of driver implementing this
 callback, or Section 2.4 for further documentation on this API
 
+Registration of EM using DT
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The  EM can also be registered using OPP framework and information in DT
+"operating-points-v2". Each OPP entry in DT can be extended with a property
+"opp-microwatt" containing micro-Watts power value. This OPP DT property
+allows a platform to register EM power values which are reflecting total power
+(static + dynamic). These power values might be coming directly from
+experiments and measurements.
+
 Registration of 'simple' EM
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

MAINTAINERS

@@ -15971,14 +15971,15 @@ M:	Niklas Cassel <nks@flawful.org>
 L:	linux-pm@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
+F:	Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
 F:	drivers/soc/qcom/cpr.c
 
 QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
 M:	Ilia Lin <ilia.lin@kernel.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+F:	Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
+F:	Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
 F:	drivers/cpufreq/qcom-cpufreq-nvmem.c
 
 QUALCOMM CRYPTO DRIVERS

arch/arm64/boot/dts/qcom/msm8996-mtp.dts

@@ -9,7 +9,7 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM 8996 MTP";
-	compatible = "qcom,msm8996-mtp";
+	compatible = "qcom,msm8996-mtp", "qcom,msm8996";
 
 	aliases {
 		serial0 = &blsp2_uart2;

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -134,7 +134,7 @@ CPU_SLEEP_0: cpu-sleep-0 {
 		};
 	};
 
-	cluster0_opp: opp_table0 {
+	cluster0_opp: opp-table-cluster0 {
 		compatible = "operating-points-v2-kryo-cpu";
 		nvmem-cells = <&speedbin_efuse>;
 		opp-shared;
@@ -222,7 +222,7 @@ opp-1593600000 {
 		};
 	};
 
-	cluster1_opp: opp_table1 {
+	cluster1_opp: opp-table-cluster1 {
 		compatible = "operating-points-v2-kryo-cpu";
 		nvmem-cells = <&speedbin_efuse>;
 		opp-shared;

arch/arm64/boot/dts/qcom/qcs404.dtsi

@@ -110,7 +110,7 @@ CPU_SLEEP_0: cpu-sleep-0 {
 		};
 	};
 
-	cpu_opp_table: cpu-opp-table {
+	cpu_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
 
@@ -128,7 +128,7 @@ opp-1401600000 {
 		};
 	};
 
-	cpr_opp_table: cpr-opp-table {
+	cpr_opp_table: opp-table-cpr {
 		compatible = "operating-points-v2-qcom-level";
 
 		cpr_opp1: opp1 {

drivers/opp/core.c

@@ -113,6 +113,31 @@ unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_voltage);
 
+/**
+ * dev_pm_opp_get_power() - Gets the power corresponding to an opp
+ * @opp:	opp for which power has to be returned for
+ *
+ * Return: power in micro watt corresponding to the opp, else
+ * return 0
+ *
+ * This is useful only for devices with single power supply.
+ */
+unsigned long dev_pm_opp_get_power(struct dev_pm_opp *opp)
+{
+	unsigned long opp_power = 0;
+	int i;
+
+	if (IS_ERR_OR_NULL(opp)) {
+		pr_err("%s: Invalid parameters\n", __func__);
+		return 0;
+	}
+	for (i = 0; i < opp->opp_table->regulator_count; i++)
+		opp_power += opp->supplies[i].u_watt;
+
+	return opp_power;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_power);
+
 /**
  * dev_pm_opp_get_freq() - Gets the frequency corresponding to an available opp
  * @opp:	opp for which frequency has to be returned for

drivers/opp/debugfs.c

@@ -10,6 +10,7 @@
 #include <linux/debugfs.h>
 #include <linux/device.h>
 #include <linux/err.h>
+#include <linux/of.h>
 #include <linux/init.h>
 #include <linux/limits.h>
 #include <linux/slab.h>
@@ -99,6 +100,9 @@ static void opp_debug_create_supplies(struct dev_pm_opp *opp,
 
 		debugfs_create_ulong("u_amp", S_IRUGO, d,
 				     &opp->supplies[i].u_amp);
+
+		debugfs_create_ulong("u_watt", S_IRUGO, d,
+				     &opp->supplies[i].u_watt);
 	}
 }
 
@@ -131,9 +135,13 @@ void opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
 	debugfs_create_bool("suspend", S_IRUGO, d, &opp->suspend);
 	debugfs_create_u32("performance_state", S_IRUGO, d, &opp->pstate);
 	debugfs_create_ulong("rate_hz", S_IRUGO, d, &opp->rate);
+	debugfs_create_u32("level", S_IRUGO, d, &opp->level);
 	debugfs_create_ulong("clock_latency_ns", S_IRUGO, d,
 			     &opp->clock_latency_ns);
 
+	opp->of_name = of_node_full_name(opp->np);
+	debugfs_create_str("of_name", S_IRUGO, d, (char **)&opp->of_name);
+
 	opp_debug_create_supplies(opp, opp_table, d);
 	opp_debug_create_bw(opp, opp_table, d);
 

drivers/opp/of.c

@@ -575,8 +575,9 @@ static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,
 static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 			      struct opp_table *opp_table)
 {
-	u32 *microvolt, *microamp = NULL;
-	int supplies = opp_table->regulator_count, vcount, icount, ret, i, j;
+	u32 *microvolt, *microamp = NULL, *microwatt = NULL;
+	int supplies = opp_table->regulator_count;
+	int vcount, icount, pcount, ret, i, j;
 	struct property *prop = NULL;
 	char name[NAME_MAX];
 
@@ -688,6 +689,43 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 		}
 	}
 
+	/* Search for "opp-microwatt" */
+	sprintf(name, "opp-microwatt");
+	prop = of_find_property(opp->np, name, NULL);
+
+	if (prop) {
+		pcount = of_property_count_u32_elems(opp->np, name);
+		if (pcount < 0) {
+			dev_err(dev, "%s: Invalid %s property (%d)\n", __func__,
+				name, pcount);
+			ret = pcount;
+			goto free_microamp;
+		}
+
+		if (pcount != supplies) {
+			dev_err(dev, "%s: Invalid number of elements in %s property (%d) with supplies (%d)\n",
+				__func__, name, pcount, supplies);
+			ret = -EINVAL;
+			goto free_microamp;
+		}
+
+		microwatt = kmalloc_array(pcount, sizeof(*microwatt),
+					  GFP_KERNEL);
+		if (!microwatt) {
+			ret = -EINVAL;
+			goto free_microamp;
+		}
+
+		ret = of_property_read_u32_array(opp->np, name, microwatt,
+						 pcount);
+		if (ret) {
+			dev_err(dev, "%s: error parsing %s: %d\n", __func__,
+				name, ret);
+			ret = -EINVAL;
+			goto free_microwatt;
+		}
+	}
+
 	for (i = 0, j = 0; i < supplies; i++) {
 		opp->supplies[i].u_volt = microvolt[j++];
 
@@ -701,8 +739,13 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 
 		if (microamp)
 			opp->supplies[i].u_amp = microamp[i];
+
+		if (microwatt)
+			opp->supplies[i].u_watt = microwatt[i];
 	}
 
+free_microwatt:
+	kfree(microwatt);
 free_microamp:
 	kfree(microamp);
 free_microvolt:
@@ -1395,6 +1438,38 @@ struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_of_node);
 
+/*
+ * Callback function provided to the Energy Model framework upon registration.
+ * It provides the power used by @dev at @kHz if it is the frequency of an
+ * existing OPP, or at the frequency of the first OPP above @kHz otherwise
+ * (see dev_pm_opp_find_freq_ceil()). This function updates @kHz to the ceiled
+ * frequency and @mW to the associated power.
+ *
+ * Returns 0 on success or a proper -EINVAL value in case of error.
+ */
+static int __maybe_unused
+_get_dt_power(unsigned long *mW, unsigned long *kHz, struct device *dev)
+{
+	struct dev_pm_opp *opp;
+	unsigned long opp_freq, opp_power;
+
+	/* Find the right frequency and related OPP */
+	opp_freq = *kHz * 1000;
+	opp = dev_pm_opp_find_freq_ceil(dev, &opp_freq);
+	if (IS_ERR(opp))
+		return -EINVAL;
+
+	opp_power = dev_pm_opp_get_power(opp);
+	dev_pm_opp_put(opp);
+	if (!opp_power)
+		return -EINVAL;
+
+	*kHz = opp_freq / 1000;
+	*mW = opp_power / 1000;
+
+	return 0;
+}
+
 /*
  * Callback function provided to the Energy Model framework upon registration.
  * This computes the power estimated by @dev at @kHz if it is the frequency
@@ -1445,6 +1520,24 @@ static int __maybe_unused _get_power(unsigned long *mW, unsigned long *kHz,
 	return 0;
 }
 
+static bool _of_has_opp_microwatt_property(struct device *dev)
+{
+	unsigned long power, freq = 0;
+	struct dev_pm_opp *opp;
+
+	/* Check if at least one OPP has needed property */
+	opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+	if (IS_ERR(opp))
+		return false;
+
+	power = dev_pm_opp_get_power(opp);
+	dev_pm_opp_put(opp);
+	if (!power)
+		return false;
+
+	return true;
+}
+
 /**
  * dev_pm_opp_of_register_em() - Attempt to register an Energy Model
  * @dev		: Device for which an Energy Model has to be registered
@@ -1458,7 +1551,7 @@ static int __maybe_unused _get_power(unsigned long *mW, unsigned long *kHz,
  */
 int dev_pm_opp_of_register_em(struct device *dev, struct cpumask *cpus)
 {
-	struct em_data_callback em_cb = EM_DATA_CB(_get_power);
+	struct em_data_callback em_cb;
 	struct device_node *np;
 	int ret, nr_opp;
 	u32 cap;
@@ -1474,6 +1567,12 @@ int dev_pm_opp_of_register_em(struct device *dev, struct cpumask *cpus)
 		goto failed;
 	}
 
+	/* First, try to find more precised Energy Model in DT */
+	if (_of_has_opp_microwatt_property(dev)) {
+		EM_SET_ACTIVE_POWER_CB(em_cb, _get_dt_power);
+		goto register_em;
+	}
+
 	np = of_node_get(dev->of_node);
 	if (!np) {
 		ret = -EINVAL;
@@ -1495,6 +1594,9 @@ int dev_pm_opp_of_register_em(struct device *dev, struct cpumask *cpus)
 		goto failed;
 	}
 
+	EM_SET_ACTIVE_POWER_CB(em_cb, _get_power);
+
+register_em:
 	ret = em_dev_register_perf_domain(dev, nr_opp, &em_cb, cpus, true);
 	if (ret)
 		goto failed;

drivers/opp/opp.h

@@ -96,6 +96,7 @@ struct dev_pm_opp {
 
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *dentry;
+	const char *of_name;
 #endif
 };
 

include/linux/energy_model.h

@@ -116,6 +116,7 @@ struct em_data_callback {
 			    struct device *dev);
 };
 #define EM_DATA_CB(_active_power_cb) { .active_power = &_active_power_cb }
+#define EM_SET_ACTIVE_POWER_CB(em_cb, cb) ((em_cb).active_power = cb)
 
 struct em_perf_domain *em_cpu_get(int cpu);
 struct em_perf_domain *em_pd_get(struct device *dev);
@@ -264,6 +265,7 @@ static inline int em_pd_nr_perf_states(struct em_perf_domain *pd)
 #else
 struct em_data_callback {};
 #define EM_DATA_CB(_active_power_cb) { }
+#define EM_SET_ACTIVE_POWER_CB(em_cb, cb) do { } while (0)
 
 static inline
 int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states,

include/linux/pm_opp.h

@@ -32,14 +32,17 @@ enum dev_pm_opp_event {
  * @u_volt_min:	Minimum voltage in microvolts corresponding to this OPP
  * @u_volt_max:	Maximum voltage in microvolts corresponding to this OPP
  * @u_amp:	Maximum current drawn by the device in microamperes
+ * @u_watt:	Power used by the device in microwatts
  *
- * This structure stores the voltage/current values for a single power supply.
+ * This structure stores the voltage/current/power values for a single power
+ * supply.
  */
 struct dev_pm_opp_supply {
 	unsigned long u_volt;
 	unsigned long u_volt_min;
 	unsigned long u_volt_max;
 	unsigned long u_amp;
+	unsigned long u_watt;
 };
 
 /**
@@ -94,6 +97,8 @@ void dev_pm_opp_put_opp_table(struct opp_table *opp_table);
 
 unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp);
 
+unsigned long dev_pm_opp_get_power(struct dev_pm_opp *opp);
+
 unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp);
 
 unsigned int dev_pm_opp_get_level(struct dev_pm_opp *opp);
@@ -186,6 +191,11 @@ static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 	return 0;
 }
 
+static inline unsigned long dev_pm_opp_get_power(struct dev_pm_opp *opp)
+{
+	return 0;
+}
+
 static inline unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp)
 {
 	return 0;