Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  Revert "USB: gadget: Allow function access to device ID data during bind()"
  USB: misc: uss720.c: add another vendor/product ID
  USB: usb-storage: unusual_devs entry for the Samsung YP-CP3
  USB: gadget: Remove suspended sysfs file before freeing cdev
  USB: core: Add input prompt and help text for USB_OTG config
  USB: ftdi_sio: Add D.O.Tec PID
  xhci: Fix issue with port array setup and buggy hosts.

drivers/usb/core/Kconfig

@@ -107,11 +107,19 @@ config USB_SUSPEND
 	  If you are unsure about this, say N here.
 
 config USB_OTG
-	bool
+	bool "OTG support"
 	depends on USB && EXPERIMENTAL
 	depends on USB_SUSPEND
 	default n
-
+	help
+	  The most notable feature of USB OTG is support for a
+	  "Dual-Role" device, which can act as either a device
+	  or a host. The initial role is decided by the type of
+	  plug inserted and can be changed later when two dual
+	  role devices talk to each other.
+
+	  Select this only if your board has Mini-AB/Micro-AB
+	  connector.
 
 config USB_OTG_WHITELIST
 	bool "Rely on OTG Targeted Peripherals List"

drivers/usb/gadget/composite.c

@@ -1047,9 +1047,9 @@ composite_unbind(struct usb_gadget *gadget)
 		kfree(cdev->req->buf);
 		usb_ep_free_request(gadget->ep0, cdev->req);
 	}
+	device_remove_file(&gadget->dev, &dev_attr_suspended);
 	kfree(cdev);
 	set_gadget_data(gadget, NULL);
-	device_remove_file(&gadget->dev, &dev_attr_suspended);
 	composite = NULL;
 }
 
@@ -1107,14 +1107,6 @@ static int composite_bind(struct usb_gadget *gadget)
 	 */
 	usb_ep_autoconfig_reset(cdev->gadget);
 
-	/* standardized runtime overrides for device ID data */
-	if (idVendor)
-		cdev->desc.idVendor = cpu_to_le16(idVendor);
-	if (idProduct)
-		cdev->desc.idProduct = cpu_to_le16(idProduct);
-	if (bcdDevice)
-		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
-
 	/* composite gadget needs to assign strings for whole device (like
 	 * serial number), register function drivers, potentially update
 	 * power state and consumption, etc
@@ -1126,6 +1118,14 @@ static int composite_bind(struct usb_gadget *gadget)
 	cdev->desc = *composite->dev;
 	cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
 
+	/* standardized runtime overrides for device ID data */
+	if (idVendor)
+		cdev->desc.idVendor = cpu_to_le16(idVendor);
+	if (idProduct)
+		cdev->desc.idProduct = cpu_to_le16(idProduct);
+	if (bcdDevice)
+		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
+
 	/* stirng overrides */
 	if (iManufacturer || !cdev->desc.iManufacturer) {
 		if (!iManufacturer && !composite->iManufacturer &&

drivers/usb/host/xhci-mem.c

@@ -1680,6 +1680,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 				xhci->port_array[i] = (u8) -1;
 			}
 			/* FIXME: Should we disable the port? */
+			continue;
 		}
 		xhci->port_array[i] = major_revision;
 		if (major_revision == 0x03)
@@ -1758,16 +1759,20 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 			return -ENOMEM;
 
 		port_index = 0;
-		for (i = 0; i < num_ports; i++)
-			if (xhci->port_array[i] != 0x03) {
-				xhci->usb2_ports[port_index] =
-					&xhci->op_regs->port_status_base +
-					NUM_PORT_REGS*i;
-				xhci_dbg(xhci, "USB 2.0 port at index %u, "
-						"addr = %p\n", i,
-						xhci->usb2_ports[port_index]);
-				port_index++;
-			}
+		for (i = 0; i < num_ports; i++) {
+			if (xhci->port_array[i] == 0x03 ||
+					xhci->port_array[i] == 0 ||
+					xhci->port_array[i] == -1)
+				continue;
+
+			xhci->usb2_ports[port_index] =
+				&xhci->op_regs->port_status_base +
+				NUM_PORT_REGS*i;
+			xhci_dbg(xhci, "USB 2.0 port at index %u, "
+					"addr = %p\n", i,
+					xhci->usb2_ports[port_index]);
+			port_index++;
+		}
 	}
 	if (xhci->num_usb3_ports) {
 		xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*

drivers/usb/misc/uss720.c

@@ -3,7 +3,7 @@
 /*
  *	uss720.c  --  USS720 USB Parport Cable.
  *
- *	Copyright (C) 1999, 2005
+ *	Copyright (C) 1999, 2005, 2010
  *	    Thomas Sailer (t.sailer@alumni.ethz.ch)
  *
  *	This program is free software; you can redistribute it and/or modify
@@ -776,6 +776,8 @@ static const struct usb_device_id uss720_table[] = {
 	{ USB_DEVICE(0x0557, 0x2001) },
 	{ USB_DEVICE(0x0729, 0x1284) },
 	{ USB_DEVICE(0x1293, 0x0002) },
+	{ USB_DEVICE(0x1293, 0x0002) },
+	{ USB_DEVICE(0x050d, 0x0002) },
 	{ }						/* Terminating entry */
 };
 

drivers/usb/serial/ftdi_sio.c

@@ -796,6 +796,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
 	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */

drivers/usb/serial/ftdi_sio_ids.h

@@ -1080,6 +1080,11 @@
 #define MJSG_XM_RADIO_PID	0x937A
 #define MJSG_HD_RADIO_PID	0x937C
 
+/*
+ * D.O.Tec products (http://www.directout.eu)
+ */
+#define FTDI_DOTEC_PID 0x9868
+
 /*
  * Xverve Signalyzer tools (http://www.signalyzer.com/)
  */

drivers/usb/storage/unusual_devs.h

@@ -481,6 +481,13 @@ UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64),
 
+/* Reported by Vitaly Kuznetsov <vitty@altlinux.ru> */
+UNUSUAL_DEV(  0x04e8, 0x5122, 0x0000, 0x9999,
+		"Samsung",
+		"YP-CP3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG),
+
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
  * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.