Commit 7bddaaca authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  Revert "USB: gadget: Allow function access to device ID data during bind()"
  USB: misc: uss720.c: add another vendor/product ID
  USB: usb-storage: unusual_devs entry for the Samsung YP-CP3
  USB: gadget: Remove suspended sysfs file before freeing cdev
  USB: core: Add input prompt and help text for USB_OTG config
  USB: ftdi_sio: Add D.O.Tec PID
  xhci: Fix issue with port array setup and buggy hosts.
parents 9d5004fc dbb442b8
...@@ -107,11 +107,19 @@ config USB_SUSPEND ...@@ -107,11 +107,19 @@ config USB_SUSPEND
If you are unsure about this, say N here. If you are unsure about this, say N here.
config USB_OTG config USB_OTG
bool bool "OTG support"
depends on USB && EXPERIMENTAL depends on USB && EXPERIMENTAL
depends on USB_SUSPEND depends on USB_SUSPEND
default n default n
help
The most notable feature of USB OTG is support for a
"Dual-Role" device, which can act as either a device
or a host. The initial role is decided by the type of
plug inserted and can be changed later when two dual
role devices talk to each other.
Select this only if your board has Mini-AB/Micro-AB
connector.
config USB_OTG_WHITELIST config USB_OTG_WHITELIST
bool "Rely on OTG Targeted Peripherals List" bool "Rely on OTG Targeted Peripherals List"
......
...@@ -1047,9 +1047,9 @@ composite_unbind(struct usb_gadget *gadget) ...@@ -1047,9 +1047,9 @@ composite_unbind(struct usb_gadget *gadget)
kfree(cdev->req->buf); kfree(cdev->req->buf);
usb_ep_free_request(gadget->ep0, cdev->req); usb_ep_free_request(gadget->ep0, cdev->req);
} }
device_remove_file(&gadget->dev, &dev_attr_suspended);
kfree(cdev); kfree(cdev);
set_gadget_data(gadget, NULL); set_gadget_data(gadget, NULL);
device_remove_file(&gadget->dev, &dev_attr_suspended);
composite = NULL; composite = NULL;
} }
...@@ -1107,14 +1107,6 @@ static int composite_bind(struct usb_gadget *gadget) ...@@ -1107,14 +1107,6 @@ static int composite_bind(struct usb_gadget *gadget)
*/ */
usb_ep_autoconfig_reset(cdev->gadget); usb_ep_autoconfig_reset(cdev->gadget);
/* standardized runtime overrides for device ID data */
if (idVendor)
cdev->desc.idVendor = cpu_to_le16(idVendor);
if (idProduct)
cdev->desc.idProduct = cpu_to_le16(idProduct);
if (bcdDevice)
cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
/* composite gadget needs to assign strings for whole device (like /* composite gadget needs to assign strings for whole device (like
* serial number), register function drivers, potentially update * serial number), register function drivers, potentially update
* power state and consumption, etc * power state and consumption, etc
...@@ -1126,6 +1118,14 @@ static int composite_bind(struct usb_gadget *gadget) ...@@ -1126,6 +1118,14 @@ static int composite_bind(struct usb_gadget *gadget)
cdev->desc = *composite->dev; cdev->desc = *composite->dev;
cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket; cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
/* standardized runtime overrides for device ID data */
if (idVendor)
cdev->desc.idVendor = cpu_to_le16(idVendor);
if (idProduct)
cdev->desc.idProduct = cpu_to_le16(idProduct);
if (bcdDevice)
cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
/* stirng overrides */ /* stirng overrides */
if (iManufacturer || !cdev->desc.iManufacturer) { if (iManufacturer || !cdev->desc.iManufacturer) {
if (!iManufacturer && !composite->iManufacturer && if (!iManufacturer && !composite->iManufacturer &&
......
...@@ -1680,6 +1680,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, ...@@ -1680,6 +1680,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
xhci->port_array[i] = (u8) -1; xhci->port_array[i] = (u8) -1;
} }
/* FIXME: Should we disable the port? */ /* FIXME: Should we disable the port? */
continue;
} }
xhci->port_array[i] = major_revision; xhci->port_array[i] = major_revision;
if (major_revision == 0x03) if (major_revision == 0x03)
...@@ -1758,16 +1759,20 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) ...@@ -1758,16 +1759,20 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
return -ENOMEM; return -ENOMEM;
port_index = 0; port_index = 0;
for (i = 0; i < num_ports; i++) for (i = 0; i < num_ports; i++) {
if (xhci->port_array[i] != 0x03) { if (xhci->port_array[i] == 0x03 ||
xhci->usb2_ports[port_index] = xhci->port_array[i] == 0 ||
&xhci->op_regs->port_status_base + xhci->port_array[i] == -1)
NUM_PORT_REGS*i; continue;
xhci_dbg(xhci, "USB 2.0 port at index %u, "
"addr = %p\n", i, xhci->usb2_ports[port_index] =
xhci->usb2_ports[port_index]); &xhci->op_regs->port_status_base +
port_index++; NUM_PORT_REGS*i;
} xhci_dbg(xhci, "USB 2.0 port at index %u, "
"addr = %p\n", i,
xhci->usb2_ports[port_index]);
port_index++;
}
} }
if (xhci->num_usb3_ports) { if (xhci->num_usb3_ports) {
xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)* xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
......
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
/* /*
* uss720.c -- USS720 USB Parport Cable. * uss720.c -- USS720 USB Parport Cable.
* *
* Copyright (C) 1999, 2005 * Copyright (C) 1999, 2005, 2010
* Thomas Sailer (t.sailer@alumni.ethz.ch) * Thomas Sailer (t.sailer@alumni.ethz.ch)
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
...@@ -776,6 +776,8 @@ static const struct usb_device_id uss720_table[] = { ...@@ -776,6 +776,8 @@ static const struct usb_device_id uss720_table[] = {
{ USB_DEVICE(0x0557, 0x2001) }, { USB_DEVICE(0x0557, 0x2001) },
{ USB_DEVICE(0x0729, 0x1284) }, { USB_DEVICE(0x0729, 0x1284) },
{ USB_DEVICE(0x1293, 0x0002) }, { USB_DEVICE(0x1293, 0x0002) },
{ USB_DEVICE(0x1293, 0x0002) },
{ USB_DEVICE(0x050d, 0x0002) },
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
......
...@@ -796,6 +796,7 @@ static struct usb_device_id id_table_combined [] = { ...@@ -796,6 +796,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */ { }, /* Optional parameter entry */
......
...@@ -1080,6 +1080,11 @@ ...@@ -1080,6 +1080,11 @@
#define MJSG_XM_RADIO_PID 0x937A #define MJSG_XM_RADIO_PID 0x937A
#define MJSG_HD_RADIO_PID 0x937C #define MJSG_HD_RADIO_PID 0x937C
/*
* D.O.Tec products (http://www.directout.eu)
*/
#define FTDI_DOTEC_PID 0x9868
/* /*
* Xverve Signalyzer tools (http://www.signalyzer.com/) * Xverve Signalyzer tools (http://www.signalyzer.com/)
*/ */
......
...@@ -481,6 +481,13 @@ UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220, ...@@ -481,6 +481,13 @@ UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220,
USB_SC_DEVICE, USB_PR_DEVICE, NULL, USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64), US_FL_MAX_SECTORS_64),
/* Reported by Vitaly Kuznetsov <vitty@altlinux.ru> */
UNUSUAL_DEV( 0x04e8, 0x5122, 0x0000, 0x9999,
"Samsung",
"YP-CP3",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG),
/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
* Device uses standards-violating 32-byte Bulk Command Block Wrappers and * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
* reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011. * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment