clk: rockchip: rename RK1108 to RV1108

Rockchip finally named the SOC as RV1108, so change it.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

[include rename in rk1108.dtsi to prevent compile errors]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm/boot/dts/rk1108.dtsi

@@ -41,7 +41,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/rk1108-cru.h>
+#include <dt-bindings/clock/rv1108-cru.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 / {
 	#address-cells = <1>;

drivers/clk/rockchip/Makefile

@@ -12,7 +12,7 @@ obj-y	+= clk-muxgrf.o
 obj-y	+= clk-ddr.o
 obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
 
-obj-y	+= clk-rk1108.o
+obj-y	+= clk-rv1108.o
 obj-y	+= clk-rk3036.o
 obj-y	+= clk-rk3188.o
 obj-y	+= clk-rk3228.o

drivers/clk/rockchip/clk.h

@@ -34,20 +34,20 @@ struct clk;
 #define HIWORD_UPDATE(val, mask, shift) \
 		((val) << (shift) | (mask) << ((shift) + 16))
 
-/* register positions shared by RK1108, RK2928, RK3036, RK3066, RK3188 and RK3228 */
-#define RK1108_PLL_CON(x)		((x) * 0x4)
-#define RK1108_CLKSEL_CON(x)		((x) * 0x4 + 0x60)
-#define RK1108_CLKGATE_CON(x)		((x) * 0x4 + 0x120)
-#define RK1108_SOFTRST_CON(x)		((x) * 0x4 + 0x180)
-#define RK1108_GLB_SRST_FST		0x1c0
-#define RK1108_GLB_SRST_SND		0x1c4
-#define RK1108_MISC_CON			0x1cc
-#define RK1108_SDMMC_CON0		0x1d8
-#define RK1108_SDMMC_CON1		0x1dc
-#define RK1108_SDIO_CON0		0x1e0
-#define RK1108_SDIO_CON1		0x1e4
-#define RK1108_EMMC_CON0		0x1e8
-#define RK1108_EMMC_CON1		0x1ec
+/* register positions shared by RV1108, RK2928, RK3036, RK3066, RK3188 and RK3228 */
+#define RV1108_PLL_CON(x)		((x) * 0x4)
+#define RV1108_CLKSEL_CON(x)		((x) * 0x4 + 0x60)
+#define RV1108_CLKGATE_CON(x)		((x) * 0x4 + 0x120)
+#define RV1108_SOFTRST_CON(x)		((x) * 0x4 + 0x180)
+#define RV1108_GLB_SRST_FST		0x1c0
+#define RV1108_GLB_SRST_SND		0x1c4
+#define RV1108_MISC_CON			0x1cc
+#define RV1108_SDMMC_CON0		0x1d8
+#define RV1108_SDMMC_CON1		0x1dc
+#define RV1108_SDIO_CON0		0x1e0
+#define RV1108_SDIO_CON1		0x1e4
+#define RV1108_EMMC_CON0		0x1e8
+#define RV1108_EMMC_CON1		0x1ec
 
 #define RK2928_PLL_CON(x)		((x) * 0x4)
 #define RK2928_MODE_CON		0x40

include/dt-bindings/clock/rk1108-cru.h → include/dt-bindings/clock/rv1108-cru.h

@@ -13,8 +13,8 @@
  * GNU General Public License for more details.
  */
 
-#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H
-#define _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RV1108_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RV1108_H
 
 /* pll id */
 #define PLL_APLL			0
@@ -266,4 +266,4 @@
 #define ARST_DSP_EDP_PERF		184
 #define ARST_DSP_EPP_PERF		185
 
-#endif /* _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H */
+#endif /* _DT_BINDINGS_CLK_ROCKCHIP_RV1108_H */