ARM: S3C64XX: Move device and device setup into mach-s3c64xx

Move the S3C64XX specific device and setup files into mach-s3c64xx as
they are unlikely to be used outside of this code.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

arch/arm/mach-s3c64xx/Kconfig

@@ -26,6 +26,32 @@ config S3C64XX_SETUP_SDHCI
 	  Internal configuration for default SDHCI setup for S3C6400 and
 	  S3C6410 SoCs.
 
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
 # S36400 Macchine support
 
 config MACH_SMDK6400

arch/arm/mach-s3c64xx/Makefile

@@ -18,9 +18,13 @@ obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 obj-y				+= irq.o
 obj-y				+= irq-eint.o
 
-# setup support
+# Device setup
 
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
 
 # PM
 
@@ -33,3 +37,10 @@ obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
 obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
 obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
+
+# device support
+
+obj-y				+= dev-uart.o
+obj-y				+= dev-rtc.o
+obj-$(CONFIG_S3C_ADC)		+= dev-adc.o
+obj-$(CONFIG_SND_S3C24XX_SOC)	+= dev-audio.o

arch/arm/plat-s3c64xx/dev-spi.c → arch/arm/mach-s3c64xx/dev-spi.c

@@ -17,8 +17,8 @@
 #include <mach/map.h>
 #include <mach/gpio.h>
 #include <mach/gpio-bank-c.h>
+#include <mach/spi-clocks.h>
 
-#include <plat/spi-clocks.h>
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
 #include <plat/irqs.h>

arch/arm/plat-s3c64xx/include/plat/spi-clocks.h → arch/arm/mach-s3c64xx/include/mach/spi-clocks.h

-/* linux/arch/arm/plat-s3c64xx/include/plat/spi-clocks.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
  *
  * Copyright (C) 2009 Samsung Electronics Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>

arch/arm/plat-s3c64xx/Kconfig

@@ -46,30 +46,4 @@ config S3C64XX_DMA
 	bool "S3C64XX DMA"
 	select S3C_DMA
 
-# platform specific device setup
-
-config S3C64XX_SETUP_I2C0
-	bool
-	default y
-	help
-	  Common setup code for i2c bus 0.
-
-	  Note, currently since i2c0 is always compiled, this setup helper
-	  is always compiled with it.
-
-config S3C64XX_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S3C64XX_SETUP_FB_24BPP
-	bool
-	help
-	  Common setup code for S3C64XX with an 24bpp RGB display helper.
-
-config S3C64XX_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for S3C64XX SDHCI GPIO configurations
-
 endif

arch/arm/plat-s3c64xx/Makefile

@@ -11,9 +11,6 @@ obj-n				:= dummy.o
 obj-				:=
 
 # Core files
-
-obj-y				+= dev-uart.o
-obj-y				+= dev-rtc.o
 obj-y				+= cpu.o
 obj-y				+= clock.o
 obj-y				+= gpiolib.o
@@ -33,15 +30,3 @@ obj-$(CONFIG_PM)		+= sleep.o
 
 obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 
-# ADC support
-
-obj-$(CONFIG_S3C_ADC)		+= dev-adc.o
-
-# Device setup
-
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
-obj-$(CONFIG_SPI_S3C64XX) += dev-spi.o