Merge tag 'amlogic-dt64' of...

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: amlogic updates for v5.9
- meson-gx: Switch to the meson-ee-pwrc bindings
- add Khadas MCU nodes

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: amlogic: Add the Ethernet "timing-adjustment" clock
  arm64: dts: meson-gx: Switch to the meson-ee-pwrc bindings
  arm64: dts: meson-khadas-vim3: add Khadas MCU nodes

Link: https://lore.kernel.org/r/7h8sfif2na.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/amlogic/meson-axg.dtsi

@@ -181,8 +181,10 @@ ethmac: ethernet@ff3f0000 {
 			interrupt-names = "macirq";
 			clocks = <&clkc CLKID_ETH>,
 				 <&clkc CLKID_FCLK_DIV2>,
-				 <&clkc CLKID_MPLL2>;
-			clock-names = "stmmaceth", "clkin0", "clkin1";
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
 			status = "disabled";

arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi

@@ -185,8 +185,10 @@ ethmac: ethernet@ff3f0000 {
 			interrupt-names = "macirq";
 			clocks = <&clkc CLKID_ETH>,
 				 <&clkc CLKID_FCLK_DIV2>,
-				 <&clkc CLKID_MPLL2>;
-			clock-names = "stmmaceth", "clkin0", "clkin1";
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
 			status = "disabled";

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -12,6 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/meson-gxbb-power.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -60,7 +61,7 @@ simplefb_cvbs: framebuffer-cvbs {
 			compatible = "amlogic,simple-framebuffer",
 				     "simple-framebuffer";
 			amlogic,pipeline = "vpu-cvbs";
-			power-domains = <&pwrc_vpu>;
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 			status = "disabled";
 		};
 
@@ -68,7 +69,7 @@ simplefb_hdmi: framebuffer-hdmi {
 			compatible = "amlogic,simple-framebuffer",
 				     "simple-framebuffer";
 			amlogic,pipeline = "vpu-hdmi";
-			power-domains = <&pwrc_vpu>;
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 			status = "disabled";
 		};
 	};
@@ -438,12 +439,6 @@ sysctrl_AO: sys-ctrl@0 {
 				compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
 				reg =  <0x0 0x0 0x0 0x100>;
 
-				pwrc_vpu: power-controller-vpu {
-					compatible = "amlogic,meson-gx-pwrc-vpu";
-					#power-domain-cells = <0>;
-					amlogic,hhi-sysctrl = <&sysctrl>;
-				};
-
 				clkc_AO: clock-controller {
 					compatible = "amlogic,meson-gx-aoclkc";
 					#clock-cells = <1>;
@@ -552,6 +547,12 @@ hiubus: bus@c883c000 {
 			sysctrl: system-controller@0 {
 				compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
 				reg = <0 0 0 0x400>;
+
+				pwrc: power-controller {
+					compatible = "amlogic,meson-gxbb-pwrc";
+					#power-domain-cells = <1>;
+					amlogic,ao-sysctrl = <&sysctrl_AO>;
+				};
 			};
 
 			mailbox: mailbox@404 {
@@ -574,6 +575,7 @@ ethmac: ethernet@c9410000 {
 			interrupt-names = "macirq";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
+			power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -333,8 +333,9 @@ &efuse {
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
 };
 
 &gpio_intc {
@@ -747,7 +748,7 @@ mux {
 	};
 };
 
-&pwrc_vpu {
+&pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
 		 <&reset RESET_VCBUS>,
@@ -760,6 +761,9 @@ &pwrc_vpu {
 		 <&reset RESET_VDI6>,
 		 <&reset RESET_VENCL>,
 		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
 	clocks = <&clkc CLKID_VPU>,
 	         <&clkc CLKID_VAPB>;
 	clock-names = "vpu", "vapb";
@@ -866,7 +870,7 @@ &uart_C {
 
 &vpu {
 	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
-	power-domains = <&pwrc_vpu>;
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 };
 
 &vdec {

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -131,8 +131,9 @@ &efuse {
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
 
 	mdio0: mdio {
 		#address-cells = <1>;
@@ -782,7 +783,7 @@ external_mdio: mdio@2009087f {
 	};
 };
 
-&pwrc_vpu {
+&pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
 		 <&reset RESET_VCBUS>,
@@ -795,6 +796,9 @@ &pwrc_vpu {
 		 <&reset RESET_VDI6>,
 		 <&reset RESET_VENCL>,
 		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
 	clocks = <&clkc CLKID_VPU>,
 	         <&clkc CLKID_VAPB>;
 	clock-names = "vpu", "vapb";
@@ -901,7 +905,7 @@ &uart_C {
 
 &vpu {
 	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
-	power-domains = <&pwrc_vpu>;
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 };
 
 &vdec {

arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi

@@ -183,6 +183,23 @@ &cecb_AO {
 	hdmi-phandle = <&hdmi_tx>;
 };
 
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &ext_mdio {
 	external_phy: ethernet-phy@0 {
 		/* Realtek RTL8211F (0x001cc916) */
@@ -222,6 +239,12 @@ &i2c_AO {
 	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
 	pinctrl-names = "default";
 
+	khadas_mcu: system-controller@18 {
+		compatible = "khadas,mcu";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
 	gpio_expander: gpio-controller@20 {
 		compatible = "ti,tca6408";
 		reg = <0x20>;