Commit 9e4249b4 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Eduardo Valentin

thermal: exynos: Fix first temperature read after registering sensor

Thermal core could not read the temperature after registering the
thermal sensor with thermal_zone_of_sensor_register() because the driver
was not yet initialized.

The call trace looked like:
    exynos_tmu_probe()
        thermal_zone_of_sensor_register()
            of_thermal_set_mode()
                thermal_zone_device_update()
                    exynos_get_temp()
                        if (!data->tmu_read) return -EINVAL;
        exynos_map_dt_data()
            data->tmu_read = ...

This produced an error in dmesg:
thermal thermal_zone0: failed to read out thermal zone (-22)

Register the thermal_zone_device later, after parsing Device Tree and
enabling necessary clocks, but before calling exynos_tmu_initialize()
which uses the registered thermal_zone_device.
Reviewed-by: default avatarAlim Akhtar <alim.akhtar@samsung.com>
Tested-by: default avatarAlim Akhtar <alim.akhtar@samsung.com>
Acked-by: default avatarLukasz Majewski <l.majewski@samsung.com>
Tested-by: default avatarLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 3b6a1a80 ("thermal: samsung: core: Exynos TMU rework to use device tree for configuration")
Signed-off-by: default avatarEduardo Valentin <edubezval@gmail.com>
parent 824ead03
......@@ -1289,13 +1289,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, data);
mutex_init(&data->lock);
data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
&exynos_sensor_ops);
if (IS_ERR(data->tzd)) {
pr_err("thermal: tz: %p ERROR\n", data->tzd);
return PTR_ERR(data->tzd);
}
/*
* Try enabling the regulator if found
* TODO: Add regulator as an SOC feature, so that regulator enable
......@@ -1365,21 +1358,36 @@ static int exynos_tmu_probe(struct platform_device *pdev)
break;
};
/*
* data->tzd must be registered before calling exynos_tmu_initialize(),
* requesting irq and calling exynos_tmu_control().
*/
data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
&exynos_sensor_ops);
if (IS_ERR(data->tzd)) {
ret = PTR_ERR(data->tzd);
dev_err(&pdev->dev, "Failed to register sensor: %d\n", ret);
goto err_sclk;
}
ret = exynos_tmu_initialize(pdev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize TMU\n");
goto err_sclk;
goto err_thermal;
}
ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
goto err_sclk;
goto err_thermal;
}
exynos_tmu_control(pdev, true);
return 0;
err_thermal:
thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd);
err_sclk:
clk_disable_unprepare(data->sclk);
err_clk:
......@@ -1390,7 +1398,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
err_sensor:
if (!IS_ERR_OR_NULL(data->regulator))
regulator_disable(data->regulator);
thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd);
return ret;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment