Merge tag 'arm-soc/for-5.12/devicetree' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.12, please pull the following:

- Dave adds a proper compatile string for the DSI1 panel on 2711
  (Raspberry Pi 4) to permit adequate driver differentiation

- Nicolas declares reserved memory regions filed by the Rasbperry Pi
  bootloader to indicate the running system configuration

- Maxime declares the BSC (HDMI I2C controller) and CEC interrupt
  controllers

- Stanislav fixes a tab vs. space issue in the BCM21664 DTS

* tag 'arm-soc/for-5.12/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm2711: Add the CEC interrupt controller
  ARM: dts: bcm21664: Replace spaces with a tab
  ARM: dts: bcm2711: Add the BSC interrupt controller
  ARM: dts: bcm2711: Add reserved memory template to hold firmware configuration
  ARM: dts: bcm2711: Use compatible string for BCM2711 DSI1

Link: https://lore.kernel.org/r/20210131221721.685974-3-f.fainelli@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/bcm21664.dtsi

@@ -27,7 +27,7 @@ chosen {
 		bootargs = "console=ttyS0,115200n8";
 	};
 
-       cpus {
+	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 

arch/arm/boot/dts/bcm2711-rpi-4-b.dts

@@ -25,6 +25,7 @@ aliases {
 		emmc2bus = &emmc2bus;
 		ethernet0 = &genet;
 		pcie0 = &pcie0;
+		blconfig = &blconfig;
 	};
 
 	leds {
@@ -218,6 +219,22 @@ &pwm1 {
 	status = "okay";
 };
 
+&rmem {
+	/*
+	 * RPi4's co-processor will copy the board's bootloader configuration
+	 * into memory for the OS to consume. It'll also update this node with
+	 * its placement information.
+	 */
+	blconfig: nvram@0 {
+		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x0>;
+		no-map;
+		status = "disabled";
+	};
+};
+
 /* SDHCI is used to control the SDIO for wireless */
 &sdhci {
 	#address-cells = <1>;

arch/arm/boot/dts/bcm2711.dtsi

@@ -308,6 +308,22 @@ dvp: clock@7ef00000 {
 			#reset-cells = <1>;
 		};
 
+		bsc_intr: interrupt-controller@7ef00040 {
+			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+			reg = <0x7ef00040 0x30>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		aon_intr: interrupt-controller@7ef00100 {
+			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+			reg = <0x7ef00100 0x30>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
 		hdmi0: hdmi@7ef00700 {
 			compatible = "brcm,bcm2711-hdmi0";
 			reg = <0x7ef00700 0x300>,
@@ -330,6 +346,11 @@ hdmi0: hdmi@7ef00700 {
 				    "hd";
 			clock-names = "hdmi", "bvb", "audio", "cec";
 			resets = <&dvp 0>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <0>, <1>, <2>,
+				     <3>, <4>, <5>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "wakeup", "hpd-connected", "hpd-removed";
 			ddc = <&ddc0>;
 			dmas = <&dma 10>;
 			dma-names = "audio-rx";
@@ -341,6 +362,8 @@ ddc0: i2c@7ef04500 {
 			reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
 			reg-names = "bsc", "auto-i2c";
 			clock-frequency = <97500>;
+			interrupt-parent = <&bsc_intr>;
+			interrupts = <0>;
 			status = "disabled";
 		};
 
@@ -367,6 +390,11 @@ hdmi1: hdmi@7ef05700 {
 			ddc = <&ddc1>;
 			clock-names = "hdmi", "bvb", "audio", "cec";
 			resets = <&dvp 1>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <8>, <7>, <6>,
+				     <9>, <10>, <11>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "wakeup", "hpd-connected", "hpd-removed";
 			dmas = <&dma 17>;
 			dma-names = "audio-rx";
 			status = "disabled";
@@ -377,6 +405,8 @@ ddc1: i2c@7ef09500 {
 			reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
 			reg-names = "bsc", "auto-i2c";
 			clock-frequency = <97500>;
+			interrupt-parent = <&bsc_intr>;
+			interrupts = <1>;
 			status = "disabled";
 		};
 	};
@@ -540,6 +570,7 @@ &dsi0 {
 
 &dsi1 {
 	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+	compatible = "brcm,bcm2711-dsi1";
 };
 
 &gpio {