Commit c50d35a9 authored by Huang Shijie's avatar Huang Shijie Committed by David Woodhouse

mtd: gpmi: simplify the DLL setting code

The setting DLL code is a little mess.
Just simplify the code and the comments.
Signed-off-by: default avatarHuang Shijie <b32955@freescale.com>
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent d37e02d8
......@@ -779,30 +779,26 @@ void gpmi_begin(struct gpmi_nand_data *this)
writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR);
/* Clear out the DLL control fields. */
writel(BM_GPMI_CTRL1_RDN_DELAY, gpmi_regs + HW_GPMI_CTRL1_CLR);
writel(BM_GPMI_CTRL1_HALF_PERIOD, gpmi_regs + HW_GPMI_CTRL1_CLR);
reg = BM_GPMI_CTRL1_RDN_DELAY | BM_GPMI_CTRL1_HALF_PERIOD;
writel(reg, gpmi_regs + HW_GPMI_CTRL1_CLR);
/* If no sample delay is called for, return immediately. */
if (!hw.sample_delay_factor)
return;
/* Configure the HALF_PERIOD flag. */
if (hw.use_half_periods)
writel(BM_GPMI_CTRL1_HALF_PERIOD,
gpmi_regs + HW_GPMI_CTRL1_SET);
/* Set RDN_DELAY or HALF_PERIOD. */
reg = ((hw.use_half_periods) ? BM_GPMI_CTRL1_HALF_PERIOD : 0)
| BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor);
/* Set the delay factor. */
writel(BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor),
gpmi_regs + HW_GPMI_CTRL1_SET);
writel(reg, gpmi_regs + HW_GPMI_CTRL1_SET);
/* Enable the DLL. */
/* At last, we enable the DLL. */
writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_SET);
/*
* After we enable the GPMI DLL, we have to wait 64 clock cycles before
* we can use the GPMI.
*
* Calculate the amount of time we need to wait, in microseconds.
* we can use the GPMI. Calculate the amount of time we need to wait,
* in microseconds.
*/
clock_period_in_ns = NSEC_PER_SEC / clk_get_rate(r->clock[0]);
dll_wait_time_in_us = (clock_period_in_ns * 64) / 1000;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment