[POWERPC] Add device trees for lite5200 and lite5200b eval boards

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/boot/dts/lite5200.dts

+/*
+ * Lite5200 board Device Tree Source
+ *
+ * Copyright 2006 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "Lite5200";
+	compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;
+			i-cache-line-size = <20>;
+			d-cache-size = <4000>;		// L1, 16K
+			i-cache-size = <4000>;		// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#interrupt-cells = <3>;
+		device_type = "soc";
+		ranges = <0 f0000000 f0010000>;
+		reg = <f0000000 00010000>;
+		bus-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "mpc5200-cdm\0mpc52xx-cdm";
+			reg = <200 38>;
+		};
+
+		pic@500 {
+			// 5200 interrupts are encoded into two levels;
+			linux,phandle = <500>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			device_type = "interrupt-controller";
+			compatible = "mpc5200-pic\0mpc52xx-pic";
+			reg = <500 80>;
+			built-in;
+		};
+
+		gpt@600 {	// General Purpose Timer
+			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <600 10>;
+			interrupts = <1 9 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@610 {	// General Purpose Timer
+			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <610 10>;
+			interrupts = <1 a 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@620 {	// General Purpose Timer
+			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <620 10>;
+			interrupts = <1 b 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@630 {	// General Purpose Timer
+			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <630 10>;
+			interrupts = <1 c 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@640 {	// General Purpose Timer
+			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <640 10>;
+			interrupts = <1 d 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@650 {	// General Purpose Timer
+			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <650 10>;
+			interrupts = <1 e 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@660 {	// General Purpose Timer
+			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <660 10>;
+			interrupts = <1 f 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@670 {	// General Purpose Timer
+			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <670 10>;
+			interrupts = <1 10 0>;
+			interrupt-parent = <500>;
+		};
+
+		rtc@800 {	// Real time clock
+			compatible = "mpc5200-rtc\0mpc52xx-rtc";
+			device_type = "rtc";
+			reg = <800 100>;
+			interrupts = <1 5 0 1 6 0>;
+			interrupt-parent = <500>;
+		};
+
+		mscan@900 {
+			device_type = "mscan";
+			compatible = "mpc5200-mscan\0mpc52xx-mscan";
+			interrupts = <2 11 0>;
+			interrupt-parent = <500>;
+			reg = <900 80>;
+		};
+
+		mscan@980 {
+			device_type = "mscan";
+			compatible = "mpc5200-mscan\0mpc52xx-mscan";
+			interrupts = <1 12 0>;
+			interrupt-parent = <500>;
+			reg = <980 80>;
+		};
+
+		gpio@b00 {
+			compatible = "mpc5200-gpio\0mpc52xx-gpio";
+			reg = <b00 40>;
+			interrupts = <1 7 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpio-wkup@b00 {
+			compatible = "mpc5200-gpio-wkup\0mpc52xx-gpio-wkup";
+			reg = <c00 40>;
+			interrupts = <1 8 0 0 3 0>;
+			interrupt-parent = <500>;
+		};
+
+		pci@0d00 {
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			compatible = "mpc5200-pci\0mpc52xx-pci";
+			reg = <d00 100>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <c000 0 0 1 500 0 0 3
+			                 c000 0 0 2 500 0 0 3
+			                 c000 0 0 3 500 0 0 3
+			                 c000 0 0 4 500 0 0 3>;
+			clock-frequency = <0>; // From boot loader
+			interrupts = <2 8 0 2 9 0 2 a 0>;
+			interrupt-parent = <500>;
+			bus-range = <0 0>;
+			ranges = <42000000 0 80000000 80000000 0 20000000
+			          02000000 0 a0000000 a0000000 0 10000000
+			          01000000 0 00000000 b0000000 0 01000000>;
+		};
+
+		spi@f00 {
+			device_type = "spi";
+			compatible = "mpc5200-spi\0mpc52xx-spi";
+			reg = <f00 20>;
+			interrupts = <2 d 0 2 e 0>;
+			interrupt-parent = <500>;
+		};
+
+		usb@1000 {
+			device_type = "usb-ohci-be";
+			compatible = "mpc5200-ohci\0mpc52xx-ohci\0ohci-be";
+			reg = <1000 ff>;
+			interrupts = <2 6 0>;
+			interrupt-parent = <500>;
+		};
+
+		bestcomm@1200 {
+			device_type = "dma-controller";
+			compatible = "mpc5200-bestcomm\0mpc52xx-bestcomm";
+			reg = <1200 80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 a 0  3 b 0
+			              3 c 0  3 d 0  3 e 0  3 f 0>;
+			interrupt-parent = <500>;
+		};
+
+		xlb@1f00 {
+			compatible = "mpc5200-xlb\0mpc52xx-xlb";
+			reg = <1f00 100>;
+		};
+
+		serial@2000 {		// PSC1
+			device_type = "serial";
+			compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+			port-number = <0>;  // Logical port assignment
+			reg = <2000 100>;
+			interrupts = <2 1 0>;
+			interrupt-parent = <500>;
+		};
+
+		// PSC2 in spi mode example
+		spi@2200 {		// PSC2
+			device_type = "spi";
+			compatible = "mpc5200-psc-spi\0mpc52xx-psc-spi";
+			reg = <2200 100>;
+			interrupts = <2 2 0>;
+			interrupt-parent = <500>;
+		};
+
+		// PSC3 in CODEC mode example
+		i2s@2400 {		// PSC3
+			device_type = "i2s";
+			compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s";
+			reg = <2400 100>;
+			interrupts = <2 3 0>;
+			interrupt-parent = <500>;
+		};
+
+		// PSC4 unconfigured
+		//serial@2600 {		// PSC4
+		//	device_type = "serial";
+		//	compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+		//	reg = <2600 100>;
+		//	interrupts = <2 b 0>;
+		//	interrupt-parent = <500>;
+		//};
+
+		// PSC5 unconfigured
+		//serial@2800 {		// PSC5
+		//	device_type = "serial";
+		//	compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+		//	reg = <2800 100>;
+		//	interrupts = <2 c 0>;
+		//	interrupt-parent = <500>;
+		//};
+
+		// PSC6 in AC97 mode example
+		ac97@2c00 {		// PSC6
+			device_type = "ac97";
+			compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97";
+			reg = <2c00 100>;
+			interrupts = <2 4 0>;
+			interrupt-parent = <500>;
+		};
+
+		ethernet@3000 {
+			device_type = "network";
+			compatible = "mpc5200-fec\0mpc52xx-fec";
+			reg = <3000 800>;
+			mac-address = [ 02 03 04 05 06 07 ]; // Bad!
+			interrupts = <2 5 0>;
+			interrupt-parent = <500>;
+		};
+
+		ata@3a00 {
+			device_type = "ata";
+			compatible = "mpc5200-ata\0mpc52xx-ata";
+			reg = <3a00 100>;
+			interrupts = <2 7 0>;
+			interrupt-parent = <500>;
+		};
+
+		i2c@3d00 {
+			device_type = "i2c";
+			compatible = "mpc5200-i2c\0mpc52xx-i2c";
+			reg = <3d00 40>;
+			interrupts = <2 f 0>;
+			interrupt-parent = <500>;
+		};
+
+		i2c@3d40 {
+			device_type = "i2c";
+			compatible = "mpc5200-i2c\0mpc52xx-i2c";
+			reg = <3d40 40>;
+			interrupts = <2 10 0>;
+			interrupt-parent = <500>;
+		};
+		sram@8000 {
+			device_type = "sram";
+			compatible = "mpc5200-sram\0mpc52xx-sram\0sram";
+			reg = <8000 4000>;
+		};
+	};
+};

arch/powerpc/boot/dts/lite5200b.dts

+/*
+ * Lite5200B board Device Tree Source
+ *
+ * Copyright 2006 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "Lite5200b";
+	compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;
+			i-cache-line-size = <20>;
+			d-cache-size = <4000>;		// L1, 16K
+			i-cache-size = <4000>;		// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 10000000>;	// 256MB
+	};
+
+	soc5200@f0000000 {
+		#interrupt-cells = <3>;
+		device_type = "soc";
+		ranges = <0 f0000000 f0010000>;
+		reg = <f0000000 00010000>;
+		bus-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "mpc5200b-cdm\0mpc52xx-cdm";
+			reg = <200 38>;
+		};
+
+		pic@500 {
+			// 5200 interrupts are encoded into two levels;
+			linux,phandle = <500>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			device_type = "interrupt-controller";
+			compatible = "mpc5200b-pic\0mpc52xx-pic";
+			reg = <500 80>;
+			built-in;
+		};
+
+		gpt@600 {	// General Purpose Timer
+			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <600 10>;
+			interrupts = <1 9 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@610 {	// General Purpose Timer
+			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <610 10>;
+			interrupts = <1 a 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@620 {	// General Purpose Timer
+			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <620 10>;
+			interrupts = <1 b 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@630 {	// General Purpose Timer
+			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <630 10>;
+			interrupts = <1 c 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@640 {	// General Purpose Timer
+			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <640 10>;
+			interrupts = <1 d 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@650 {	// General Purpose Timer
+			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <650 10>;
+			interrupts = <1 e 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@660 {	// General Purpose Timer
+			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <660 10>;
+			interrupts = <1 f 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpt@670 {	// General Purpose Timer
+			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			device_type = "gpt";
+			reg = <670 10>;
+			interrupts = <1 10 0>;
+			interrupt-parent = <500>;
+		};
+
+		rtc@800 {	// Real time clock
+			compatible = "mpc5200b-rtc\0mpc52xx-rtc";
+			device_type = "rtc";
+			reg = <800 100>;
+			interrupts = <1 5 0 1 6 0>;
+			interrupt-parent = <500>;
+		};
+
+		mscan@900 {
+			device_type = "mscan";
+			compatible = "mpc5200b-mscan\0mpc52xx-mscan";
+			interrupts = <2 11 0>;
+			interrupt-parent = <500>;
+			reg = <900 80>;
+		};
+
+		mscan@980 {
+			device_type = "mscan";
+			compatible = "mpc5200b-mscan\0mpc52xx-mscan";
+			interrupts = <1 12 0>;
+			interrupt-parent = <500>;
+			reg = <980 80>;
+		};
+
+		gpio@b00 {
+			compatible = "mpc5200b-gpio\0mpc52xx-gpio";
+			reg = <b00 40>;
+			interrupts = <1 7 0>;
+			interrupt-parent = <500>;
+		};
+
+		gpio-wkup@b00 {
+			compatible = "mpc5200b-gpio-wkup\0mpc52xx-gpio-wkup";
+			reg = <c00 40>;
+			interrupts = <1 8 0 0 3 0>;
+			interrupt-parent = <500>;
+		};
+
+		pci@0d00 {
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			compatible = "mpc5200b-pci\0mpc52xx-pci";
+			reg = <d00 100>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <c000 0 0 1 500 0 0 3 // 1st slot
+			                 c000 0 0 2 500 1 1 3
+			                 c000 0 0 3 500 1 2 3
+			                 c000 0 0 4 500 1 3 3
+
+			                 c800 0 0 1 500 1 1 3 // 2nd slot
+			                 c800 0 0 2 500 1 2 3
+			                 c800 0 0 3 500 1 3 3
+			                 c800 0 0 4 500 0 0 3>;
+			clock-frequency = <0>; // From boot loader
+			interrupts = <2 8 0 2 9 0 2 a 0>;
+			interrupt-parent = <500>;
+			bus-range = <0 0>;
+			ranges = <42000000 0 80000000 80000000 0 20000000
+			          02000000 0 a0000000 a0000000 0 10000000
+			          01000000 0 00000000 b0000000 0 01000000>;
+		};
+
+		spi@f00 {
+			device_type = "spi";
+			compatible = "mpc5200b-spi\0mpc52xx-spi";
+			reg = <f00 20>;
+			interrupts = <2 d 0 2 e 0>;
+			interrupt-parent = <500>;
+		};
+
+		usb@1000 {
+			device_type = "usb-ohci-be";
+			compatible = "mpc5200b-ohci\0mpc52xx-ohci\0ohci-be";
+			reg = <1000 ff>;
+			interrupts = <2 6 0>;
+			interrupt-parent = <500>;
+		};
+
+		bestcomm@1200 {
+			device_type = "dma-controller";
+			compatible = "mpc5200b-bestcomm\0mpc52xx-bestcomm";
+			reg = <1200 80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 a 0  3 b 0
+			              3 c 0  3 d 0  3 e 0  3 f 0>;
+			interrupt-parent = <500>;
+		};
+
+		xlb@1f00 {
+			compatible = "mpc5200b-xlb\0mpc52xx-xlb";
+			reg = <1f00 100>;
+		};
+
+		serial@2000 {		// PSC1
+			device_type = "serial";
+			compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+			port-number = <0>;  // Logical port assignment
+			reg = <2000 100>;
+			interrupts = <2 1 0>;
+			interrupt-parent = <500>;
+		};
+
+		// PSC2 in spi mode example
+		spi@2200 {		// PSC2
+			device_type = "spi";
+			compatible = "mpc5200b-psc-spi\0mpc52xx-psc-spi";
+			reg = <2200 100>;
+			interrupts = <2 2 0>;
+			interrupt-parent = <500>;
+		};
+
+		// PSC3 in CODEC mode example
+		i2s@2400 {		// PSC3
+			device_type = "i2s";
+			compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s";
+			reg = <2400 100>;
+			interrupts = <2 3 0>;
+			interrupt-parent = <500>;
+		};
+
+		// PSC4 unconfigured
+		//serial@2600 {		// PSC4
+		//	device_type = "serial";
+		//	compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+		//	reg = <2600 100>;
+		//	interrupts = <2 b 0>;
+		//	interrupt-parent = <500>;
+		//};
+
+		// PSC5 unconfigured
+		//serial@2800 {		// PSC5
+		//	device_type = "serial";
+		//	compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+		//	reg = <2800 100>;
+		//	interrupts = <2 c 0>;
+		//	interrupt-parent = <500>;
+		//};
+
+		// PSC6 in AC97 mode example
+		ac97@2c00 {		// PSC6
+			device_type = "ac97";
+			compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97";
+			reg = <2c00 100>;
+			interrupts = <2 4 0>;
+			interrupt-parent = <500>;
+		};
+
+		ethernet@3000 {
+			device_type = "network";
+			compatible = "mpc5200b-fec\0mpc52xx-fec";
+			reg = <3000 800>;
+			mac-address = [ 02 03 04 05 06 07 ]; // Bad!
+			interrupts = <2 5 0>;
+			interrupt-parent = <500>;
+		};
+
+		ata@3a00 {
+			device_type = "ata";
+			compatible = "mpc5200b-ata\0mpc52xx-ata";
+			reg = <3a00 100>;
+			interrupts = <2 7 0>;
+			interrupt-parent = <500>;
+		};
+
+		i2c@3d00 {
+			device_type = "i2c";
+			compatible = "mpc5200b-i2c\0mpc52xx-i2c";
+			reg = <3d00 40>;
+			interrupts = <2 f 0>;
+			interrupt-parent = <500>;
+		};
+
+		i2c@3d40 {
+			device_type = "i2c";
+			compatible = "mpc5200b-i2c\0mpc52xx-i2c";
+			reg = <3d40 40>;
+			interrupts = <2 10 0>;
+			interrupt-parent = <500>;
+		};
+		sram@8000 {
+			device_type = "sram";
+			compatible = "mpc5200b-sram\0mpc52xx-sram\0sram";
+			reg = <8000 4000>;
+		};
+	};
+};