Commit cab00891 authored by Matt LaPlante's avatar Matt LaPlante Committed by Adrian Bunk

Still more typo fixes

Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
parent 44c09201
...@@ -13,7 +13,7 @@ config MACH_ANUBIS ...@@ -13,7 +13,7 @@ config MACH_ANUBIS
bool "Simtec Electronics ANUBIS" bool "Simtec Electronics ANUBIS"
select CPU_S3C2440 select CPU_S3C2440
help help
Say Y gere if you are using the Simtec Electronics ANUBIS Say Y here if you are using the Simtec Electronics ANUBIS
development system development system
config MACH_OSIRIS config MACH_OSIRIS
......
...@@ -24,12 +24,12 @@ config MPC8540_ADS ...@@ -24,12 +24,12 @@ config MPC8540_ADS
config MPC8548_CDS config MPC8548_CDS
bool "Freescale MPC8548 CDS" bool "Freescale MPC8548 CDS"
help help
This option enablese support for the MPC8548 CDS evaluation board. This option enables support for the MPC8548 CDS evaluation board.
config MPC8555_CDS config MPC8555_CDS
bool "Freescale MPC8555 CDS" bool "Freescale MPC8555 CDS"
help help
This option enablese support for the MPC8555 CDS evaluation board. This option enables support for the MPC8555 CDS evaluation board.
config MPC8560_ADS config MPC8560_ADS
bool "Freescale MPC8560 ADS" bool "Freescale MPC8560 ADS"
...@@ -51,22 +51,22 @@ config STX_GP3 ...@@ -51,22 +51,22 @@ config STX_GP3
config TQM8540 config TQM8540
bool "TQ Components TQM8540" bool "TQ Components TQM8540"
help help
This option enablese support for the TQ Components TQM8540 board. This option enables support for the TQ Components TQM8540 board.
config TQM8541 config TQM8541
bool "TQ Components TQM8541" bool "TQ Components TQM8541"
help help
This option enablese support for the TQ Components TQM8541 board. This option enables support for the TQ Components TQM8541 board.
config TQM8555 config TQM8555
bool "TQ Components TQM8555" bool "TQ Components TQM8555"
help help
This option enablese support for the TQ Components TQM8555 board. This option enables support for the TQ Components TQM8555 board.
config TQM8560 config TQM8560
bool "TQ Components TQM8560" bool "TQ Components TQM8560"
help help
This option enablese support for the TQ Components TQM8560 board. This option enables support for the TQ Components TQM8560 board.
endchoice endchoice
...@@ -94,7 +94,7 @@ config MPC8560 ...@@ -94,7 +94,7 @@ config MPC8560
default y default y
config 85xx_PCI2 config 85xx_PCI2
bool "Supprt for 2nd PCI host controller" bool "Support for 2nd PCI host controller"
depends on MPC8555_CDS depends on MPC8555_CDS
default y default y
......
...@@ -206,7 +206,7 @@ source "drivers/pci/hotplug/Kconfig" ...@@ -206,7 +206,7 @@ source "drivers/pci/hotplug/Kconfig"
endmenu endmenu
menu "Exectuable file formats" menu "Executable file formats"
# only elf supported # only elf supported
config KCORE_ELF config KCORE_ELF
...@@ -241,7 +241,7 @@ menu "Xtensa initrd options" ...@@ -241,7 +241,7 @@ menu "Xtensa initrd options"
bool "Embed root filesystem ramdisk into the kernel" bool "Embed root filesystem ramdisk into the kernel"
config EMBEDDED_RAMDISK_IMAGE config EMBEDDED_RAMDISK_IMAGE
string "Filename of gziped ramdisk image" string "Filename of gzipped ramdisk image"
depends on EMBEDDED_RAMDISK depends on EMBEDDED_RAMDISK
default "ramdisk.gz" default "ramdisk.gz"
help help
......
...@@ -26,7 +26,7 @@ config INFINIBAND_IPOIB_DEBUG_DATA ...@@ -26,7 +26,7 @@ config INFINIBAND_IPOIB_DEBUG_DATA
bool "IP-over-InfiniBand data path debugging" bool "IP-over-InfiniBand data path debugging"
depends on INFINIBAND_IPOIB_DEBUG depends on INFINIBAND_IPOIB_DEBUG
---help--- ---help---
This option compiles debugging code into the the data path This option compiles debugging code into the data path
of the IPoIB driver. The output can be turned on via the of the IPoIB driver. The output can be turned on via the
data_debug_level module parameter; however, even with output data_debug_level module parameter; however, even with output
turned off, this debugging code will have some performance turned off, this debugging code will have some performance
......
...@@ -69,6 +69,6 @@ config VIDEO_CX88_VP3054 ...@@ -69,6 +69,6 @@ config VIDEO_CX88_VP3054
depends on VIDEO_CX88_DVB && DVB_MT352 depends on VIDEO_CX88_DVB && DVB_MT352
---help--- ---help---
This adds DVB-T support for cards based on the This adds DVB-T support for cards based on the
Connexant 2388x chip and the MT352 demodulator, Conexant 2388x chip and the MT352 demodulator,
which also require support for the VP-3054 which also require support for the VP-3054
Secondary I2C bus, such at DNTV Live! DVB-T Pro. Secondary I2C bus, such at DNTV Live! DVB-T Pro.
...@@ -2115,7 +2115,7 @@ config SKY2 ...@@ -2115,7 +2115,7 @@ config SKY2
depends on PCI && EXPERIMENTAL depends on PCI && EXPERIMENTAL
select CRC32 select CRC32
---help--- ---help---
This driver supports Gigabit Ethernet adapters based on the the This driver supports Gigabit Ethernet adapters based on the
Marvell Yukon 2 chipset: Marvell Yukon 2 chipset:
Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
......
...@@ -157,7 +157,7 @@ config HOTPLUG_PCI_RPA ...@@ -157,7 +157,7 @@ config HOTPLUG_PCI_RPA
tristate "RPA PCI Hotplug driver" tristate "RPA PCI Hotplug driver"
depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
help help
Say Y here if you have a a RPA system that supports PCI Hotplug. Say Y here if you have a RPA system that supports PCI Hotplug.
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called rpaphp. module will be called rpaphp.
......
...@@ -64,7 +64,7 @@ config USB_XUSBATM ...@@ -64,7 +64,7 @@ config USB_XUSBATM
Say Y here if you have a DSL USB modem not explicitly supported by Say Y here if you have a DSL USB modem not explicitly supported by
another USB DSL drivers. In order to use your modem you will need to another USB DSL drivers. In order to use your modem you will need to
pass the vendor ID, product ID, and endpoint numbers for transmission pass the vendor ID, product ID, and endpoint numbers for transmission
and reception as module parameters. You may need to initialize the and reception as module parameters. You may need to initialize
the modem using a user space utility (a firmware loader for example). the modem using a user space utility (a firmware loader for example).
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
# #
# - Host systems (like PCs) need CONFIG_USB (with "A" jacks). # - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
# - Some systems have both kinds of of controller. # - Some systems have both kinds of controllers.
# #
# With help from a special transceiver and a "Mini-AB" jack, systems with # With help from a special transceiver and a "Mini-AB" jack, systems with
# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
......
...@@ -188,7 +188,7 @@ config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT ...@@ -188,7 +188,7 @@ config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
help help
This is an implementation of the Sharp LQ035Q7DB02, a 3.5" This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
color QVGA, HRTFT panel. The LogicPD device includes an color QVGA, HRTFT panel. The LogicPD device includes
an integrated HRTFT controller IC. an integrated HRTFT controller IC.
The native resolution is 240x320. The native resolution is 240x320.
......
...@@ -1365,7 +1365,7 @@ config SYSV_FS ...@@ -1365,7 +1365,7 @@ config SYSV_FS
If you have floppies or hard disk partitions like that, it is likely If you have floppies or hard disk partitions like that, it is likely
that they contain binaries from those other Unix systems; in order that they contain binaries from those other Unix systems; in order
to run these binaries, you will want to install linux-abi which is a to run these binaries, you will want to install linux-abi which is
a set of kernel modules that lets you run SCO, Xenix, Wyse, a set of kernel modules that lets you run SCO, Xenix, Wyse,
UnixWare, Dell Unix and System V programs under Linux. It is UnixWare, Dell Unix and System V programs under Linux. It is
available via FTP (user: ftp) from available via FTP (user: ftp) from
......
...@@ -269,7 +269,7 @@ A partial list of the supported mount options follows: ...@@ -269,7 +269,7 @@ A partial list of the supported mount options follows:
(gid) mount option is specified. For the uid (gid) of newly (gid) mount option is specified. For the uid (gid) of newly
created files and directories, ie files created since created files and directories, ie files created since
the last mount of the server share, the expected uid the last mount of the server share, the expected uid
(gid) is cached as as long as the inode remains in (gid) is cached as long as the inode remains in
memory on the client. Also note that permission memory on the client. Also note that permission
checks (authorization checks) on accesses to a file occur checks (authorization checks) on accesses to a file occur
at the server, but there are cases in which an administrator at the server, but there are cases in which an administrator
...@@ -375,7 +375,7 @@ A partial list of the supported mount options follows: ...@@ -375,7 +375,7 @@ A partial list of the supported mount options follows:
the local process on newly created files, directories, and the local process on newly created files, directories, and
devices (create, mkdir, mknod). If the CIFS Unix Extensions devices (create, mkdir, mknod). If the CIFS Unix Extensions
are not negotiated, for newly created files and directories are not negotiated, for newly created files and directories
instead of using the default uid and gid specified on the instead of using the default uid and gid specified on
the mount, cache the new file's uid and gid locally which means the mount, cache the new file's uid and gid locally which means
that the uid for the file can change when the inode is that the uid for the file can change when the inode is
reloaded (or the user remounts the share). reloaded (or the user remounts the share).
...@@ -440,7 +440,7 @@ A partial list of the supported mount options follows: ...@@ -440,7 +440,7 @@ A partial list of the supported mount options follows:
create device files and fifos in a format compatible with create device files and fifos in a format compatible with
Services for Unix (SFU). In addition retrieve bits 10-12 Services for Unix (SFU). In addition retrieve bits 10-12
of the mode via the SETFILEBITS extended attribute (as of the mode via the SETFILEBITS extended attribute (as
SFU does). In the future the bottom 9 bits of the mode SFU does). In the future the bottom 9 bits of the
mode also will be emulated using queries of the security mode also will be emulated using queries of the security
descriptor (ACL). descriptor (ACL).
sign Must use packet signing (helps avoid unwanted data modification sign Must use packet signing (helps avoid unwanted data modification
......
...@@ -556,7 +556,7 @@ config TCP_CONG_LP ...@@ -556,7 +556,7 @@ config TCP_CONG_LP
default n default n
---help--- ---help---
TCP Low Priority (TCP-LP), a distributed algorithm whose goal is TCP Low Priority (TCP-LP), a distributed algorithm whose goal is
to utiliza only the excess network bandwidth as compared to the to utilize only the excess network bandwidth as compared to the
``fair share`` of bandwidth as targeted by TCP. ``fair share`` of bandwidth as targeted by TCP.
See http://www-ece.rice.edu/networks/TCP-LP/ See http://www-ece.rice.edu/networks/TCP-LP/
......
...@@ -204,7 +204,7 @@ config IP_VS_SED ...@@ -204,7 +204,7 @@ config IP_VS_SED
connections to the server with the shortest expected delay. The connections to the server with the shortest expected delay. The
expected delay that the job will experience is (Ci + 1) / Ui if expected delay that the job will experience is (Ci + 1) / Ui if
sent to the ith server, in which Ci is the number of connections sent to the ith server, in which Ci is the number of connections
on the the ith server and Ui is the fixed service rate (weight) on the ith server and Ui is the fixed service rate (weight)
of the ith server. of the ith server.
If you want to compile it in kernel, say Y. To compile it as a If you want to compile it in kernel, say Y. To compile it as a
......
...@@ -122,7 +122,7 @@ config SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT ...@@ -122,7 +122,7 @@ config SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT
well as any conntrack helpers for protocols which you well as any conntrack helpers for protocols which you
wish to control. wish to control.
If you are unsure what do do here, select N. If you are unsure what to do here, select N.
config SECURITY_SELINUX_POLICYDB_VERSION_MAX config SECURITY_SELINUX_POLICYDB_VERSION_MAX
bool "NSA SELinux maximum supported policy format version" bool "NSA SELinux maximum supported policy format version"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment