ARM: shmobile: r8a7778: cleanup registration of sh_eth

sh_eth driver which needs platform data at the time of
registration is used from BockW only.
Now, ARM/shmobile aims to support DT,
and the C code base board support will be removed
if DT support is completed.
Current driver registration method which needs platform data
and which is not shared complicates codes.
This means legacy C code cleanup after DT supporting
will be more complicated
This patch registers it on board code as cleanup C code
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

arch/arm/mach-shmobile/board-bockw.c

@@ -101,6 +101,12 @@ static struct resource sdhi0_resources[] __initdata = {
 	DEFINE_RES_IRQ(gic_iid(0x77)),
 };
 
+/* Ether */
+static struct resource ether_resources[] __initdata = {
+	DEFINE_RES_MEM(0xfde00000, 0x400),
+	DEFINE_RES_IRQ(gic_iid(0x89)),
+};
+
 static struct sh_eth_plat_data ether_platform_data __initdata = {
 	.phy		= 0x01,
 	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
@@ -255,7 +261,13 @@ static void __init bockw_init(void)
 	r8a7778_clock_init();
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
-	r8a7778_add_ether_device(&ether_platform_data);
+
+	platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
+					  ether_resources,
+					  ARRAY_SIZE(ether_resources),
+					  &ether_platform_data,
+					  sizeof(ether_platform_data));
+
 	platform_device_register_full(&vin0_info);
 	/* VIN1 has a pin conflict with Ether */
 	if (!IS_ENABLED(CONFIG_SH_ETH))

arch/arm/mach-shmobile/include/mach/r8a7778.h

@@ -23,7 +23,6 @@
 
 extern void r8a7778_add_standard_devices(void);
 extern void r8a7778_add_standard_devices_dt(void);
-extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata);
 extern void r8a7778_add_dt_devices(void);
 
 extern void r8a7778_init_late(void);

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -174,20 +174,6 @@ static struct platform_device_info hci##_info __initdata = {	\
 USB_PLATFORM_INFO(ehci);
 USB_PLATFORM_INFO(ohci);
 
-/* Ether */
-static struct resource ether_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfde00000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x89)),
-};
-
-void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata)
-{
-	platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  pdata, sizeof(*pdata));
-}
-
 /* PFC/GPIO */
 static struct resource pfc_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfffc0000, 0x118),