Commit cd4ab042 authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Simon Horman

ARM: shmobile: r8a7778: cleanup registration of sh_eth

sh_eth driver which needs platform data at the time of
registration is used from BockW only.
Now, ARM/shmobile aims to support DT,
and the C code base board support will be removed
if DT support is completed.
Current driver registration method which needs platform data
and which is not shared complicates codes.
This means legacy C code cleanup after DT supporting
will be more complicated
This patch registers it on board code as cleanup C code
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent fd131d0d
...@@ -101,6 +101,12 @@ static struct resource sdhi0_resources[] __initdata = { ...@@ -101,6 +101,12 @@ static struct resource sdhi0_resources[] __initdata = {
DEFINE_RES_IRQ(gic_iid(0x77)), DEFINE_RES_IRQ(gic_iid(0x77)),
}; };
/* Ether */
static struct resource ether_resources[] __initdata = {
DEFINE_RES_MEM(0xfde00000, 0x400),
DEFINE_RES_IRQ(gic_iid(0x89)),
};
static struct sh_eth_plat_data ether_platform_data __initdata = { static struct sh_eth_plat_data ether_platform_data __initdata = {
.phy = 0x01, .phy = 0x01,
.edmac_endian = EDMAC_LITTLE_ENDIAN, .edmac_endian = EDMAC_LITTLE_ENDIAN,
...@@ -255,7 +261,13 @@ static void __init bockw_init(void) ...@@ -255,7 +261,13 @@ static void __init bockw_init(void)
r8a7778_clock_init(); r8a7778_clock_init();
r8a7778_init_irq_extpin(1); r8a7778_init_irq_extpin(1);
r8a7778_add_standard_devices(); r8a7778_add_standard_devices();
r8a7778_add_ether_device(&ether_platform_data);
platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
ether_resources,
ARRAY_SIZE(ether_resources),
&ether_platform_data,
sizeof(ether_platform_data));
platform_device_register_full(&vin0_info); platform_device_register_full(&vin0_info);
/* VIN1 has a pin conflict with Ether */ /* VIN1 has a pin conflict with Ether */
if (!IS_ENABLED(CONFIG_SH_ETH)) if (!IS_ENABLED(CONFIG_SH_ETH))
......
...@@ -23,7 +23,6 @@ ...@@ -23,7 +23,6 @@
extern void r8a7778_add_standard_devices(void); extern void r8a7778_add_standard_devices(void);
extern void r8a7778_add_standard_devices_dt(void); extern void r8a7778_add_standard_devices_dt(void);
extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata);
extern void r8a7778_add_dt_devices(void); extern void r8a7778_add_dt_devices(void);
extern void r8a7778_init_late(void); extern void r8a7778_init_late(void);
......
...@@ -174,20 +174,6 @@ static struct platform_device_info hci##_info __initdata = { \ ...@@ -174,20 +174,6 @@ static struct platform_device_info hci##_info __initdata = { \
USB_PLATFORM_INFO(ehci); USB_PLATFORM_INFO(ehci);
USB_PLATFORM_INFO(ohci); USB_PLATFORM_INFO(ohci);
/* Ether */
static struct resource ether_resources[] __initdata = {
DEFINE_RES_MEM(0xfde00000, 0x400),
DEFINE_RES_IRQ(gic_iid(0x89)),
};
void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata)
{
platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
ether_resources,
ARRAY_SIZE(ether_resources),
pdata, sizeof(*pdata));
}
/* PFC/GPIO */ /* PFC/GPIO */
static struct resource pfc_resources[] __initdata = { static struct resource pfc_resources[] __initdata = {
DEFINE_RES_MEM(0xfffc0000, 0x118), DEFINE_RES_MEM(0xfffc0000, 0x118),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment