Commit d7502f7f authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branches 'asoc/topic/tlv320aic31xx',...

Merge remote-tracking branches 'asoc/topic/tlv320aic31xx', 'asoc/topic/tlv320aic32x4', 'asoc/topic/tlv320aic3x', 'asoc/topic/tlv320dac33' and 'asoc/topic/ts3a227e' into asoc-next
......@@ -22,7 +22,7 @@ Required properties:
Optional properties:
- gpio-reset - gpio pin number used for codec reset
- reset-gpios - GPIO specification for the active low RESET input.
- ai31xx-micbias-vg - MicBias Voltage setting
1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
......@@ -30,6 +30,10 @@ Optional properties:
If this node is not mentioned or if the value is unknown, then
micbias is set to 2.0V.
Deprecated properties:
- gpio-reset - gpio pin number used for codec reset
CODEC output pins:
* HPL
* HPR
......@@ -48,6 +52,7 @@ CODEC input pins:
The pins can be used in referring sound node's audio-routing property.
Example:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
tlv320aic31xx: tlv320aic31xx@18 {
......@@ -56,6 +61,8 @@ tlv320aic31xx: tlv320aic31xx@18 {
ai31xx-micbias-vg = <MICBIAS_OFF>;
reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
HPVDD-supply = <&regulator>;
SPRVDD-supply = <&regulator>;
SPLVDD-supply = <&regulator>;
......
......@@ -17,7 +17,7 @@ Required properties:
Optional properties:
- gpio-reset - gpio pin number used for codec reset
- reset-gpios - GPIO specification for the active low RESET input.
- ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
- Not supported on tlv320aic3104
- ai3x-micbias-vg - MicBias Voltage required.
......@@ -34,6 +34,10 @@ Optional properties:
- AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the
device as covered in Documentation/devicetree/bindings/regulator/regulator.txt
Deprecated properties:
- gpio-reset - gpio pin number used for codec reset
CODEC output pins:
* LLOUT
* RLOUT
......@@ -61,10 +65,14 @@ The pins can be used in referring sound node's audio-routing property.
Example:
#include <dt-bindings/gpio/gpio.h>
tlv320aic3x: tlv320aic3x@1b {
compatible = "ti,tlv320aic3x";
reg = <0x1b>;
reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
AVDD-supply = <&regulator>;
IOVDD-supply = <&regulator>;
DRVDD-supply = <&regulator>;
......
......@@ -939,12 +939,12 @@ config SND_SOC_TLV320AIC32X4
tristate
config SND_SOC_TLV320AIC32X4_I2C
tristate
tristate "Texas Instruments TLV320AIC32x4 audio CODECs - I2C"
depends on I2C
select SND_SOC_TLV320AIC32X4
config SND_SOC_TLV320AIC32X4_SPI
tristate
tristate "Texas Instruments TLV320AIC32x4 audio CODECs - SPI"
depends on SPI_MASTER
select SND_SOC_TLV320AIC32X4
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -1804,11 +1804,18 @@ static int aic3x_i2c_probe(struct i2c_client *i2c,
if (!ai3x_setup)
return -ENOMEM;
ret = of_get_named_gpio(np, "reset-gpios", 0);
if (ret >= 0) {
aic3x->gpio_reset = ret;
} else {
ret = of_get_named_gpio(np, "gpio-reset", 0);
if (ret >= 0)
if (ret > 0) {
dev_warn(&i2c->dev, "Using deprecated property \"gpio-reset\", please update your DT");
aic3x->gpio_reset = ret;
else
} else {
aic3x->gpio_reset = -1;
}
}
if (of_property_read_u32_array(np, "ai3x-gpio-func",
ai3x_setup->gpio_func, 2) >= 0) {
......
......@@ -106,6 +106,7 @@ struct tlv320dac33_priv {
int mode1_latency; /* latency caused by the i2c writes in
* us */
u8 burst_bclkdiv; /* BCLK divider value in burst mode */
u8 *reg_cache;
unsigned int burst_rate; /* Interface speed in Burst modes */
int keep_bclk; /* Keep the BCLK continuously running
......@@ -121,7 +122,7 @@ struct tlv320dac33_priv {
unsigned int uthr;
enum dac33_state state;
void *control_data;
struct i2c_client *i2c;
};
static const u8 dac33_reg[DAC33_CACHEREGNUM] = {
......@@ -173,7 +174,8 @@ static const u8 dac33_reg[DAC33_CACHEREGNUM] = {
static inline unsigned int dac33_read_reg_cache(struct snd_soc_codec *codec,
unsigned reg)
{
u8 *cache = codec->reg_cache;
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
u8 *cache = dac33->reg_cache;
if (reg >= DAC33_CACHEREGNUM)
return 0;
......@@ -183,7 +185,8 @@ static inline unsigned int dac33_read_reg_cache(struct snd_soc_codec *codec,
static inline void dac33_write_reg_cache(struct snd_soc_codec *codec,
u8 reg, u8 value)
{
u8 *cache = codec->reg_cache;
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
u8 *cache = dac33->reg_cache;
if (reg >= DAC33_CACHEREGNUM)
return;
......@@ -200,7 +203,7 @@ static int dac33_read(struct snd_soc_codec *codec, unsigned int reg,
/* If powered off, return the cached value */
if (dac33->chip_power) {
val = i2c_smbus_read_byte_data(codec->control_data, value[0]);
val = i2c_smbus_read_byte_data(dac33->i2c, value[0]);
if (val < 0) {
dev_err(codec->dev, "Read failed (%d)\n", val);
value[0] = dac33_read_reg_cache(codec, reg);
......@@ -233,7 +236,7 @@ static int dac33_write(struct snd_soc_codec *codec, unsigned int reg,
dac33_write_reg_cache(codec, data[0], data[1]);
if (dac33->chip_power) {
ret = codec->hw_write(codec->control_data, data, 2);
ret = i2c_master_send(dac33->i2c, data, 2);
if (ret != 2)
dev_err(codec->dev, "Write failed (%d)\n", ret);
else
......@@ -243,19 +246,6 @@ static int dac33_write(struct snd_soc_codec *codec, unsigned int reg,
return ret;
}
static int dac33_write_locked(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
int ret;
mutex_lock(&dac33->mutex);
ret = dac33_write(codec, reg, value);
mutex_unlock(&dac33->mutex);
return ret;
}
#define DAC33_I2C_ADDR_AUTOINC 0x80
static int dac33_write16(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
......@@ -280,7 +270,7 @@ static int dac33_write16(struct snd_soc_codec *codec, unsigned int reg,
if (dac33->chip_power) {
/* We need to set autoincrement mode for 16 bit writes */
data[0] |= DAC33_I2C_ADDR_AUTOINC;
ret = codec->hw_write(codec->control_data, data, 3);
ret = i2c_master_send(dac33->i2c, data, 3);
if (ret != 3)
dev_err(codec->dev, "Write failed (%d)\n", ret);
else
......@@ -1379,8 +1369,6 @@ static int dac33_soc_probe(struct snd_soc_codec *codec)
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
int ret = 0;
codec->control_data = dac33->control_data;
codec->hw_write = (hw_write_t) i2c_master_send;
dac33->codec = codec;
/* Read the tlv320dac33 ID registers */
......@@ -1434,13 +1422,9 @@ static int dac33_soc_remove(struct snd_soc_codec *codec)
}
static const struct snd_soc_codec_driver soc_codec_dev_tlv320dac33 = {
.read = dac33_read_reg_cache,
.write = dac33_write_locked,
.set_bias_level = dac33_set_bias_level,
.idle_bias_off = true,
.reg_cache_size = ARRAY_SIZE(dac33_reg),
.reg_word_size = sizeof(u8),
.reg_cache_default = dac33_reg,
.probe = dac33_soc_probe,
.remove = dac33_soc_remove,
......@@ -1499,7 +1483,14 @@ static int dac33_i2c_probe(struct i2c_client *client,
if (dac33 == NULL)
return -ENOMEM;
dac33->control_data = client;
dac33->reg_cache = devm_kmemdup(&client->dev,
dac33_reg,
ARRAY_SIZE(dac33_reg) * sizeof(u8),
GFP_KERNEL);
if (!dac33->reg_cache)
return -ENOMEM;
dac33->i2c = client;
mutex_init(&dac33->mutex);
spin_lock_init(&dac33->lock);
......
......@@ -241,7 +241,7 @@ int ts3a227e_enable_jack_detect(struct snd_soc_component *component,
{
struct ts3a227e *ts3a227e = snd_soc_component_get_drvdata(component);
snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_MEDIA);
snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment