Commit da295041 authored by Isaac Assegai's avatar Isaac Assegai Committed by Greg Kroah-Hartman

Staging: sm750fb: ddk750_display.c: Insert spaces after commas.

Insert Spaces after commas to rectify the
following checkpatch errors in ddk750_display.c:
ERROR: space required after that ','
Signed-off-by: default avatarIsaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 195d2b64
......@@ -4,9 +4,9 @@
#include "ddk750_power.h"
#include "ddk750_dvi.h"
#define primaryWaitVerticalSync(delay) waitNextVerticalSync(0,delay)
#define primaryWaitVerticalSync(delay) waitNextVerticalSync(0, delay)
static void setDisplayControl(int ctrl,int dispState)
static void setDisplayControl(int ctrl, int dispState)
{
/* state != 0 means turn on both timing & plane en_bit */
unsigned long ulDisplayCtrlReg, ulReservedBits;
......@@ -51,7 +51,7 @@ static void setDisplayControl(int ctrl,int dispState)
POKE32(PANEL_DISPLAY_CTRL, ulDisplayCtrlReg);
} while((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) !=
(ulDisplayCtrlReg & ~ulReservedBits));
printk("Set Panel Plane enbit:after tried %d times\n",cnt);
printk("Set Panel Plane enbit:after tried %d times\n", cnt);
}
else
{
......@@ -106,7 +106,7 @@ static void setDisplayControl(int ctrl,int dispState)
POKE32(CRT_DISPLAY_CTRL, ulDisplayCtrlReg);
} while((PEEK32(CRT_DISPLAY_CTRL) & ~ulReservedBits) !=
(ulDisplayCtrlReg & ~ulReservedBits));
printk("Set Crt Plane enbit:after tried %d times\n",cnt);
printk("Set Crt Plane enbit:after tried %d times\n", cnt);
}
else
{
......@@ -129,7 +129,7 @@ static void setDisplayControl(int ctrl,int dispState)
}
static void waitNextVerticalSync(int ctrl,int delay)
static void waitNextVerticalSync(int ctrl, int delay)
{
unsigned int status;
if(!ctrl){
......@@ -201,31 +201,31 @@ static void waitNextVerticalSync(int ctrl,int delay)
}
}
static void swPanelPowerSequence(int disp,int delay)
static void swPanelPowerSequence(int disp, int delay)
{
unsigned int reg;
/* disp should be 1 to open sequence */
reg = PEEK32(PANEL_DISPLAY_CTRL);
reg = FIELD_VALUE(reg,PANEL_DISPLAY_CTRL,FPEN,disp);
POKE32(PANEL_DISPLAY_CTRL,reg);
reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, FPEN, disp);
POKE32(PANEL_DISPLAY_CTRL, reg);
primaryWaitVerticalSync(delay);
reg = PEEK32(PANEL_DISPLAY_CTRL);
reg = FIELD_VALUE(reg,PANEL_DISPLAY_CTRL,DATA,disp);
POKE32(PANEL_DISPLAY_CTRL,reg);
reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, DATA, disp);
POKE32(PANEL_DISPLAY_CTRL, reg);
primaryWaitVerticalSync(delay);
reg = PEEK32(PANEL_DISPLAY_CTRL);
reg = FIELD_VALUE(reg,PANEL_DISPLAY_CTRL,VBIASEN,disp);
POKE32(PANEL_DISPLAY_CTRL,reg);
reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, VBIASEN, disp);
POKE32(PANEL_DISPLAY_CTRL, reg);
primaryWaitVerticalSync(delay);
reg = PEEK32(PANEL_DISPLAY_CTRL);
reg = FIELD_VALUE(reg,PANEL_DISPLAY_CTRL,FPEN,disp);
POKE32(PANEL_DISPLAY_CTRL,reg);
reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, FPEN, disp);
POKE32(PANEL_DISPLAY_CTRL, reg);
primaryWaitVerticalSync(delay);
}
......@@ -236,33 +236,33 @@ void ddk750_setLogicalDispOut(disp_output_t output)
if(output & PNL_2_USAGE){
/* set panel path controller select */
reg = PEEK32(PANEL_DISPLAY_CTRL);
reg = FIELD_VALUE(reg,PANEL_DISPLAY_CTRL,SELECT,(output & PNL_2_MASK)>>PNL_2_OFFSET);
POKE32(PANEL_DISPLAY_CTRL,reg);
reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, SELECT, (output & PNL_2_MASK)>>PNL_2_OFFSET);
POKE32(PANEL_DISPLAY_CTRL, reg);
}
if(output & CRT_2_USAGE){
/* set crt path controller select */
reg = PEEK32(CRT_DISPLAY_CTRL);
reg = FIELD_VALUE(reg,CRT_DISPLAY_CTRL,SELECT,(output & CRT_2_MASK)>>CRT_2_OFFSET);
reg = FIELD_VALUE(reg, CRT_DISPLAY_CTRL, SELECT, (output & CRT_2_MASK)>>CRT_2_OFFSET);
/*se blank off */
reg = FIELD_SET(reg,CRT_DISPLAY_CTRL,BLANK,OFF);
POKE32(CRT_DISPLAY_CTRL,reg);
reg = FIELD_SET(reg, CRT_DISPLAY_CTRL, BLANK, OFF);
POKE32(CRT_DISPLAY_CTRL, reg);
}
if(output & PRI_TP_USAGE){
/* set primary timing and plane en_bit */
setDisplayControl(0,(output&PRI_TP_MASK)>>PRI_TP_OFFSET);
setDisplayControl(0, (output&PRI_TP_MASK)>>PRI_TP_OFFSET);
}
if(output & SEC_TP_USAGE){
/* set secondary timing and plane en_bit*/
setDisplayControl(1,(output&SEC_TP_MASK)>>SEC_TP_OFFSET);
setDisplayControl(1, (output&SEC_TP_MASK)>>SEC_TP_OFFSET);
}
if(output & PNL_SEQ_USAGE){
/* set panel sequence */
swPanelPowerSequence((output&PNL_SEQ_MASK)>>PNL_SEQ_OFFSET,4);
swPanelPowerSequence((output&PNL_SEQ_MASK)>>PNL_SEQ_OFFSET, 4);
}
if(output & DAC_USAGE)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment