Commit dfcab17e authored by Ville Syrjälä's avatar Ville Syrjälä Committed by Daniel Vetter

drm/i915: Change vlv cdclk to use kHz units

Use kHz units in vlv cdclk code since that's more customary.

Also replace the precomputed 90% values with *9/10 computation
for extra clarity.
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent f1615bbe
......@@ -4465,6 +4465,7 @@ static void modeset_update_crtc_power_domains(struct drm_device *dev)
intel_display_set_init_power(dev_priv, false);
}
/* returns HPLL frequency in kHz */
int valleyview_get_vco(struct drm_i915_private *dev_priv)
{
int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
......@@ -4475,7 +4476,7 @@ int valleyview_get_vco(struct drm_i915_private *dev_priv)
CCK_FUSE_HPLL_FREQ_MASK;
mutex_unlock(&dev_priv->dpio_lock);
return vco_freq[hpll_freq];
return vco_freq[hpll_freq] * 1000;
}
/* Adjust CDclk dividers to allow high res or save power if possible */
......@@ -4487,9 +4488,9 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
WARN_ON(valleyview_cur_cdclk(dev_priv) != dev_priv->vlv_cdclk_freq);
dev_priv->vlv_cdclk_freq = cdclk;
if (cdclk >= 320) /* jump to highest voltage for 400MHz too */
if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
cmd = 2;
else if (cdclk == 266)
else if (cdclk == 266667)
cmd = 1;
else
cmd = 0;
......@@ -4506,11 +4507,11 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
}
mutex_unlock(&dev_priv->rps.hw_lock);
if (cdclk == 400) {
if (cdclk == 400000) {
u32 divider, vco;
vco = valleyview_get_vco(dev_priv);
divider = ((vco << 1) / cdclk) - 1;
divider = DIV_ROUND_CLOSEST(vco << 1, cdclk) - 1;
mutex_lock(&dev_priv->dpio_lock);
/* adjust cdclk divider */
......@@ -4530,7 +4531,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
* For high bandwidth configs, we set a higher latency in the bunit
* so that the core display fetch happens in time to avoid underruns.
*/
if (cdclk == 400)
if (cdclk == 400000)
val |= 4500 / 250; /* 4.5 usec */
else
val |= 3000 / 250; /* 3.0 usec */
......@@ -4554,7 +4555,7 @@ int valleyview_cur_cdclk(struct drm_i915_private *dev_priv)
divider &= 0xf;
cur_cdclk = (vco << 1) / (divider + 1);
cur_cdclk = DIV_ROUND_CLOSEST(vco << 1, divider + 1);
return cur_cdclk;
}
......@@ -4571,12 +4572,12 @@ static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
* So we check to see whether we're above 90% of the lower bin and
* adjust if needed.
*/
if (max_pixclk > 288000) {
return 400;
} else if (max_pixclk > 240000) {
return 320;
} else
return 266;
if (max_pixclk > 320000*9/10)
return 400000;
else if (max_pixclk > 266667*9/10)
return 320000;
else
return 266667;
/* Looks like the 200MHz CDclk freq doesn't work on some configs */
}
......
......@@ -86,7 +86,7 @@ static void gmbus_set_freq(struct drm_i915_private *dev_priv)
BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));
vco = valleyview_get_vco(dev_priv);
vco = valleyview_get_vco(dev_priv) / 1000;
/* Get the CDCLK divide ratio */
cdclk_div = get_disp_clk_div(dev_priv, CDCLK);
......
......@@ -5596,7 +5596,7 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
DRM_DEBUG_DRIVER("DDR speed: %d MHz", dev_priv->mem_freq);
dev_priv->vlv_cdclk_freq = valleyview_cur_cdclk(dev_priv);
DRM_DEBUG_DRIVER("Current CD clock rate: %d MHz",
DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz",
dev_priv->vlv_cdclk_freq);
I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment