Merge branch 'for-next/perf-cn10k' into for-next/perf

* for-next/perf-cn10k:
  dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings
  drivers: perf: Add LLC-TAD perf counter support

Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/marvell-cn10k-tad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN10K LLC-TAD performance monitor
+
+maintainers:
+  - Bhaskara Budiredla <bbudiredla@marvell.com>
+
+description: |
+  The Tag-and-Data units (TADs) maintain coherence and contain CN10K
+  shared on-chip last level cache (LLC). The tad pmu measures the
+  performance of last-level cache. Each tad pmu supports up to eight
+  counters.
+
+  The DT setup comprises of number of tad blocks, the sizes of pmu
+  regions, tad blocks and overall base address of the HW.
+
+properties:
+  compatible:
+    const: marvell,cn10k-tad-pmu
+
+  reg:
+    maxItems: 1
+
+  marvell,tad-cnt:
+    description: specifies the number of tads on the soc
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  marvell,tad-page-size:
+    description: specifies the size of each tad page
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  marvell,tad-pmu-page-size:
+    description: specifies the size of page that the pmu uses
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - marvell,tad-cnt
+  - marvell,tad-page-size
+  - marvell,tad-pmu-page-size
+
+additionalProperties: false
+
+examples:
+  - |
+
+    tad {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        tad_pmu@80000000 {
+            compatible = "marvell,cn10k-tad-pmu";
+            reg = <0x87e2 0x80000000 0x0 0x1000>;
+            marvell,tad-cnt = <1>;
+            marvell,tad-page-size = <0x1000>;
+            marvell,tad-pmu-page-size = <0x1000>;
+        };
+    };

drivers/perf/Kconfig

@@ -139,6 +139,13 @@ config ARM_DMC620_PMU
 	  Support for PMU events monitoring on the ARM DMC-620 memory
 	  controller.
 
+config MARVELL_CN10K_TAD_PMU
+	tristate "Marvell CN10K LLC-TAD PMU"
+	depends on ARM64 || (COMPILE_TEST && 64BIT)
+	help
+	  Provides support for Last-Level cache Tag-and-data Units (LLC-TAD)
+	  performance monitors on CN10K family silicons.
+
 source "drivers/perf/hisilicon/Kconfig"
 
 endmenu

drivers/perf/Makefile

@@ -14,3 +14,4 @@ obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
 obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
 obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
+obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o