Skip to content

L
linux
Commit f0b9c27c authored by Joe Perches's avatar Joe Perches Committed by Michael Grzeschik
Browse files
Options

arcnet: com90io: Use arcnet_<I/O> routines 

Simplify and make consistent the current uses of inb/outb
by using the newly introduced arcnet_<I/O> equivalents.

o Add new #defines for register offsets
o Remove old #defines that included the ioaddr
o Remove obfuscating macros by expanding them in-place where appropriate
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarMichael Grzeschik <m.grzeschik@pengutronix.de>
parent 0fec6513
Hide whitespace changes
Inline Side-by-side
Showing with 48 additions and 53 deletions
drivers/net/arcnet/com90io.c
View file @ f0b9c27c
......@@ -59,23 +59,14 @@ static void com90io_copy_from_card(struct net_device *dev, int bufnum,
#define ARCNET_TOTAL_SIZE 16
/* COM 9026 controller chip --> ARCnet register addresses */
#define _INTMASK (ioaddr + 0) /* writable */
#define _STATUS (ioaddr + 0) /* readable */
#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */
#define _RESET (ioaddr + 8) /* software reset (on read) */
#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */
#define _ADDR_HI (ioaddr + 15) /* Control registers for said */
#define _ADDR_LO (ioaddr + 14)
#define _CONFIG (ioaddr + 2) /* Configuration register */
#undef ASTATUS
#undef ACOMMAND
#undef AINTMASK
#define ASTATUS() inb(_STATUS)
#define ACOMMAND(cmd) outb((cmd), _COMMAND)
#define AINTMASK(msk) outb((msk), _INTMASK)
#define SETCONF() outb((lp->config), _CONFIG)
#define COM9026_REG_W_INTMASK 0 /* writable */
#define COM9026_REG_R_STATUS 0 /* readable */
#define COM9026_REG_W_COMMAND 1 /* writable, returns random vals on read (?) */
#define COM9026_REG_RW_CONFIG 2 /* Configuration register */
#define COM9026_REG_R_RESET 8 /* software reset (on read) */
#define COM9026_REG_RW_MEMDATA 12 /* Data port for IO-mapped memory */
#define COM9026_REG_W_ADDR_LO 14 /* Control registers for said */
#define COM9026_REG_W_ADDR_HI 15
/****************************************************************************
* *
......@@ -90,10 +81,10 @@ static u_char get_buffer_byte(struct net_device *dev, unsigned offset)
{
int ioaddr = dev->base_addr;
outb(offset >> 8, _ADDR_HI);
outb(offset & 0xff, _ADDR_LO);
arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI);
arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
return inb(_MEMDATA);
return arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
}
#ifdef ONE_AT_A_TIME_TX
......@@ -102,10 +93,10 @@ static void put_buffer_byte(struct net_device *dev, unsigned offset,
{
int ioaddr = dev->base_addr;
outb(offset >> 8, _ADDR_HI);
outb(offset & 0xff, _ADDR_LO);
arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI);
arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
outb(datum, _MEMDATA);
arcnet_outb(datum, ioaddr, COM9026_REG_RW_MEMDATA);
}
#endif
......@@ -115,14 +106,14 @@ static void get_whole_buffer(struct net_device *dev, unsigned offset,
{
int ioaddr = dev->base_addr;
outb((offset >> 8) | AUTOINCflag, _ADDR_HI);
outb(offset & 0xff, _ADDR_LO);
arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
while (length--)
#ifdef ONE_AT_A_TIME_RX
*(dest++) = get_buffer_byte(dev, offset++);
#else
*(dest++) = inb(_MEMDATA);
*(dest++) = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
#endif
}
......@@ -131,14 +122,14 @@ static void put_whole_buffer(struct net_device *dev, unsigned offset,
{
int ioaddr = dev->base_addr;
outb((offset >> 8) | AUTOINCflag, _ADDR_HI);
outb(offset & 0xff, _ADDR_LO);
arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
arcnet_outb(offset & 0xff, ioaddr,COM9026_REG_W_ADDR_LO);
while (length--)
#ifdef ONE_AT_A_TIME_TX
put_buffer_byte(dev, offset++, *(dest++));
#else
outb(*(dest++), _MEMDATA);
arcnet_outb(*(dest++), ioaddr, COM9026_REG_RW_MEMDATA);
#endif
}
......@@ -164,15 +155,15 @@ static int __init com90io_probe(struct net_device *dev)
ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
return -ENXIO;
}
if (ASTATUS() == 0xFF) {
if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) {
arc_printk(D_INIT_REASONS, dev, "IO address %x empty\n",
ioaddr);
goto err_out;
}
inb(_RESET);
arcnet_inb(ioaddr, COM9026_REG_R_RESET);
mdelay(RESETtime);
status = ASTATUS();
status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
if ((status & 0x9D) != (NORXflag | RECONflag | TXFREEflag | RESETflag)) {
arc_printk(D_INIT_REASONS, dev, "Status invalid (%Xh)\n",
......@@ -181,26 +172,28 @@ static int __init com90io_probe(struct net_device *dev)
}
arc_printk(D_INIT_REASONS, dev, "Status after reset: %X\n", status);
ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
ioaddr, COM9026_REG_W_COMMAND);
arc_printk(D_INIT_REASONS, dev, "Status after reset acknowledged: %X\n",
status);
status = ASTATUS();
status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
if (status & RESETflag) {
arc_printk(D_INIT_REASONS, dev, "Eternal reset (status=%Xh)\n",
status);
goto err_out;
}
outb((0x16 | IOMAPflag) & ~ENABLE16flag, _CONFIG);
arcnet_outb((0x16 | IOMAPflag) & ~ENABLE16flag,
ioaddr, COM9026_REG_RW_CONFIG);
/* Read first loc'n of memory */
outb(AUTOINCflag, _ADDR_HI);
outb(0, _ADDR_LO);
arcnet_outb(AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
arcnet_outb(0, ioaddr, COM9026_REG_W_ADDR_LO);
status = inb(_MEMDATA);
status = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
if (status != 0xd1) {
arc_printk(D_INIT_REASONS, dev, "Signature byte not found (%Xh instead).\n",
status);
......@@ -213,9 +206,9 @@ static int __init com90io_probe(struct net_device *dev)
*/
airqmask = probe_irq_on();
outb(NORXflag, _INTMASK);
arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK);
udelay(1);
outb(0, _INTMASK);
arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK);
dev->irq = probe_irq_off(airqmask);
if ((int)dev->irq <= 0) {
......@@ -264,7 +257,7 @@ static int __init com90io_found(struct net_device *dev)
lp->hw.copy_from_card = com90io_copy_from_card;
lp->config = (0x16 | IOMAPflag) & ~ENABLE16flag;
SETCONF();
arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG);
/* get and check the station ID from offset 1 in shmem */
......@@ -272,7 +265,8 @@ static int __init com90io_found(struct net_device *dev)
err = register_netdev(dev);
if (err) {
outb((inb(_CONFIG) & ~IOMAPflag), _CONFIG);
arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag,
ioaddr, COM9026_REG_RW_CONFIG);
free_irq(dev->irq, dev);
release_region(dev->base_addr, ARCNET_TOTAL_SIZE);
return err;
......@@ -297,19 +291,20 @@ static int com90io_reset(struct net_device *dev, int really_reset)
short ioaddr = dev->base_addr;
arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
dev->name, ASTATUS());
dev->name, arcnet_inb(ioaddr, COM9026_REG_R_STATUS));
if (really_reset) {
/* reset the card */
inb(_RESET);
arcnet_inb(ioaddr, COM9026_REG_R_RESET);
mdelay(RESETtime);
}
/* Set the thing to IO-mapped, 8-bit mode */
lp->config = (0x1C | IOMAPflag) & ~ENABLE16flag;
SETCONF();
arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG);
ACOMMAND(CFLAGScmd | RESETclear); /* clear flags & end reset */
ACOMMAND(CFLAGScmd | CONFIGclear);
arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND);
/* clear flags & end reset */
arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND);
/* verify that the ARCnet signature byte is present */
if (get_buffer_byte(dev, 0) != TESTvalue) {
......@@ -317,8 +312,7 @@ static int com90io_reset(struct net_device *dev, int really_reset)
return 1;
}
/* enable extended (512-byte) packets */
ACOMMAND(CONFIGcmd | EXTconf);
arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND);
/* done! return success. */
return 0;
}
......@@ -327,21 +321,21 @@ static void com90io_command(struct net_device *dev, int cmd)
{
short ioaddr = dev->base_addr;
ACOMMAND(cmd);
arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND);
}
static int com90io_status(struct net_device *dev)
{
short ioaddr = dev->base_addr;
return ASTATUS();
return arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
}
static void com90io_setmask(struct net_device *dev, int mask)
{
short ioaddr = dev->base_addr;
AINTMASK(mask);
arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK);
}
static void com90io_copy_to_card(struct net_device *dev, int bufnum,
......@@ -427,7 +421,8 @@ static void __exit com90io_exit(void)
/* In case the old driver is loaded later,
* set the thing back to MMAP mode
*/
outb((inb(_CONFIG) & ~IOMAPflag), _CONFIG);
arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag,
ioaddr, COM9026_REG_RW_CONFIG);
free_irq(dev->irq, dev);
release_region(dev->base_addr, ARCNET_TOTAL_SIZE);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7