Merge tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Michael Turquette:
 "The clk framework changes for 4.3 are mostly updates to existing
  drivers and the addition of new clock drivers.  Stephen Boyd has also
  done a lot of subsystem-wide driver clean-ups (thanks!).  There are
  also fixes to the framework core and changes to better split clock
  provider drivers from clock consumer drivers"

* tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
  clk: s5pv210: add missing call to samsung_clk_of_add_provider()
  clk: pistachio: correct critical clock list
  clk: pistachio: Fix PLL rate calculation in integer mode
  clk: pistachio: Fix override of clk-pll settings from boot loader
  clk: pistachio: Fix 32bit integer overflows
  clk: tegra: Fix some static checker problems
  clk: qcom: Fix MSM8916 prng clock enable bit
  clk: Add missing header for 'bool' definition to clk-conf.h
  drivers/clk: appropriate __init annotation for const data
  clk: rockchip: register pll mux before pll itself
  clk: add bindings for the Ux500 clocks
  clk/ARM: move Ux500 PRCC bases to the device tree
  clk: remove duplicated code with __clk_set_parent_after
  clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)
  clk: Constify clk_hw argument to provider APIs
  clk: Hi6220: add stub clock driver
  dt-bindings: clk: Hi6220: Document stub clock driver
  dt-bindings: arm: Hi6220: add doc for SRAM controller
  clk: atlas7: fix pll missed divide NR in fraction mode
  clk: atlas7: fix bit field and its root clk for coresight_tpiu
  ...

Documentation/clk.txt

@@ -71,12 +71,8 @@ the operations defined in clk.h:
 		long		(*round_rate)(struct clk_hw *hw,
 						unsigned long rate,
 						unsigned long *parent_rate);
-		long		(*determine_rate)(struct clk_hw *hw,
-						unsigned long rate,
-						unsigned long min_rate,
-						unsigned long max_rate,
-						unsigned long *best_parent_rate,
-						struct clk_hw **best_parent_clk);
+		int		(*determine_rate)(struct clk_hw *hw,
+						  struct clk_rate_request *req);
 		int		(*set_parent)(struct clk_hw *hw, u8 index);
 		u8		(*get_parent)(struct clk_hw *hw);
 		int		(*set_rate)(struct clk_hw *hw,

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

@@ -127,6 +127,24 @@ Example:
 		#clock-cells = <1>;
 	};
 
+
+Hisilicon Hi6220 SRAM controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-sramctrl", "syscon"
+- reg : Register address and size
+
+Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several
+SRAM banks for power management, modem, security, etc. Further, use "syscon"
+managing the common sram which can be shared by multiple modules.
+
+Example:
+	/*for Hi6220*/
+	sram: sram@fff80000 {
+		compatible = "hisilicon,hi6220-sramctrl", "syscon";
+		reg = <0x0 0xfff80000 0x0 0x12000>;
+	};
+
 -----------------------------------------------------------------------
 Hisilicon HiP01 system controller
 

Documentation/devicetree/bindings/arm/sp810.txt

+SP810 System Controller
+-----------------------
+
+Required properties:
+
+- compatible:	standard compatible string for a Primecell peripheral,
+		see Documentation/devicetree/bindings/arm/primecell.txt
+		for more details
+		should be: "arm,sp810", "arm,primecell"
+
+- reg:		standard registers property, physical address and size
+		of the control registers
+
+- clock-names:	from the common clock bindings, for more details see
+		Documentation/devicetree/bindings/clock/clock-bindings.txt;
+		should be: "refclk", "timclk", "apb_pclk"
+
+- clocks:	from the common clock bindings, phandle and clock
+		specifier pairs for the entries of clock-names property
+
+- #clock-cells: from the common clock bindings;
+		should be: <1>
+
+- clock-output-names: from the common clock bindings;
+		should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3"
+
+- assigned-clocks: from the common clock binding;
+		should be: clock specifier for each output clock of this
+		provider node
+
+- assigned-clock-parents: from the common clock binding;
+		should be: phandle of input clock listed in clocks
+		property with the highest frequency
+
+Example:
+	v2m_sysctl: sysctl@020000 {
+		compatible = "arm,sp810", "arm,primecell";
+		reg = <0x020000 0x1000>;
+		clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+		clock-names = "refclk", "timclk", "apb_pclk";
+		#clock-cells = <1>;
+		clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+		assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+		assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+
+	};

Documentation/devicetree/bindings/clock/gpio-mux-clock.txt

+Binding for simple gpio clock multiplexer.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "gpio-mux-clock".
+- clocks: list of two references to parent clocks.
+- #clock-cells : from common clock binding; shall be set to 0.
+- select-gpios : GPIO reference for selecting the parent clock.
+
+Example:
+	clock {
+		compatible = "gpio-mux-clock";
+		clocks = <&parentclk1>, <&parentclk2>;
+		#clock-cells = <0>;
+		select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+	};

Documentation/devicetree/bindings/clock/hi6220-clock.txt

@@ -15,19 +15,36 @@ Required Properties:
 	- "hisilicon,hi6220-sysctrl"
 	- "hisilicon,hi6220-mediactrl"
 	- "hisilicon,hi6220-pmctrl"
+	- "hisilicon,hi6220-stub-clk"
 
 - reg: physical base address of the controller and length of memory mapped
   region.
 
 - #clock-cells: should be 1.
 
-For example:
+Optional Properties:
+
+- hisilicon,hi6220-clk-sram: phandle to the syscon managing the SoC internal sram;
+  the driver need use the sram to pass parameters for frequency change.
+
+- mboxes: use the label reference for the mailbox as the first parameter, the
+  second parameter is the channel number.
+
+Example 1:
 	sys_ctrl: sys_ctrl@f7030000 {
 		compatible = "hisilicon,hi6220-sysctrl", "syscon";
 		reg = <0x0 0xf7030000 0x0 0x2000>;
 		#clock-cells = <1>;
 	};
 
+Example 2:
+	stub_clock: stub_clock {
+		compatible = "hisilicon,hi6220-stub-clk";
+		hisilicon,hi6220-clk-sram = <&sram>;
+		#clock-cells = <1>;
+		mboxes = <&mailbox 1>;
+	};
+
 Each clock is assigned an identifier and client nodes use this identifier
 to specify the clock which they consume.
 

Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt

+NVIDIA Tegra124 DFLL FCPU clocksource
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The DFLL IP block on Tegra is a root clocksource designed for clocking
+the fast CPU cluster. It consists of a free-running voltage controlled
+oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop
+control module that will automatically adjust the VDD_CPU voltage by
+communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
+Currently only the I2C mode is supported by these bindings.
+
+Required properties:
+- compatible : should be "nvidia,tegra124-dfll"
+- reg : Defines the following set of registers, in the order listed:
+        - registers for the DFLL control logic.
+        - registers for the I2C output logic.
+        - registers for the integrated I2C master controller.
+        - look-up table RAM for voltage register values.
+- interrupts: Should contain the DFLL block interrupt.
+- clocks: Must contain an entry for each entry in clock-names.
+  See clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - soc: Clock source for the DFLL control logic.
+  - ref: The closed loop reference clock
+  - i2c: Clock source for the integrated I2C master.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - dvco: Reset control for the DFLL DVCO.
+- #clock-cells: Must be 0.
+- clock-output-names: Name of the clock output.
+- vdd-cpu-supply: Regulator for the CPU voltage rail that the DFLL
+  hardware will start controlling. The regulator will be queried for
+  the I2C register, control values and supported voltages.
+
+Required properties for the control loop parameters:
+- nvidia,sample-rate: Sample rate of the DFLL control loop.
+- nvidia,droop-ctrl: See the register CL_DVFS_DROOP_CTRL in the TRM.
+- nvidia,force-mode: See the field DFLL_PARAMS_FORCE_MODE in the TRM.
+- nvidia,cf: Numeric value, see the field DFLL_PARAMS_CF_PARAM in the TRM.
+- nvidia,ci: Numeric value, see the field DFLL_PARAMS_CI_PARAM in the TRM.
+- nvidia,cg: Numeric value, see the field DFLL_PARAMS_CG_PARAM in the TRM.
+
+Optional properties for the control loop parameters:
+- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM.
+
+Required properties for I2C mode:
+- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode.
+
+Example:
+
+clock@0,70110000 {
+        compatible = "nvidia,tegra124-dfll";
+        reg = <0 0x70110000 0 0x100>, /* DFLL control */
+              <0 0x70110000 0 0x100>, /* I2C output control */
+              <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+              <0 0x70110200 0 0x100>; /* Look-up table RAM */
+        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+                 <&tegra_car TEGRA124_CLK_DFLL_REF>,
+                 <&tegra_car TEGRA124_CLK_I2C5>;
+        clock-names = "soc", "ref", "i2c";
+        resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+        reset-names = "dvco";
+        #clock-cells = <0>;
+        clock-output-names = "dfllCPU_out";
+        vdd-cpu-supply = <&vdd_cpu>;
+        status = "okay";
+
+        nvidia,sample-rate = <12500>;
+        nvidia,droop-ctrl = <0x00000f00>;
+        nvidia,force-mode = <1>;
+        nvidia,cf = <10>;
+        nvidia,ci = <0>;
+        nvidia,cg = <2>;
+
+        nvidia,i2c-fs-rate = <400000>;
+};

Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt

+* Rockchip RK3368 Clock and Reset Unit
+
+The RK3368 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3368-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing, pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+ - "ext_vip" - external VIP clock - optional,
+ - "usbotg_out" - output clock of the pll in the otg phy
+
+Example: Clock controller node:
+
+	cru: clock-controller@ff760000 {
+		compatible = "rockchip,rk3368-cru";
+		reg = <0x0 0xff760000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clocks = <&cru SCLK_UART0>;
+	};

Documentation/devicetree/bindings/clock/ux500.txt

+Clock bindings for ST-Ericsson Ux500 clocks
+
+Required properties :
+- compatible : shall contain only one of the following:
+  "stericsson,u8500-clks"
+  "stericsson,u8540-clks"
+  "stericsson,u9540-clks"
+- reg : shall contain base register location and length for
+  CLKRST1, 2, 3, 5, and 6 in an array. Note the absence of
+  CLKRST4, which does not exist.
+
+Required subnodes:
+- prcmu-clock: a subnode with one clock cell for PRCMU (power,
+  reset, control unit) clocks. The cell indicates which PRCMU
+  clock in the prcmu-clock node the consumer wants to use.
+- prcc-periph-clock: a subnode with two clock cells for
+  PRCC (programmable reset- and clock controller) peripheral clocks.
+  The first cell indicates which PRCC block the consumer
+  wants to use, possible values are 1, 2, 3, 5, 6. The second
+  cell indicates which clock inside the PRCC block it wants,
+  possible values are 0 thru 31.
+- prcc-kernel-clock: a subnode with two clock cells for
+  PRCC (programmable reset- and clock controller) kernel clocks
+  The first cell indicates which PRCC block the consumer
+  wants to use, possible values are 1, 2, 3, 5, 6. The second
+  cell indicates which clock inside the PRCC block it wants,
+  possible values are 0 thru 31.
+- rtc32k-clock: a subnode with zero clock cells for the 32kHz
+  RTC clock.
+- smp-twd-clock: a subnode for the ARM SMP Timer Watchdog cluster
+  with zero clock cells.
+
+Example:
+
+clocks {
+	compatible = "stericsson,u8500-clks";
+	/*
+	 * Registers for the CLKRST block on peripheral
+	 * groups 1, 2, 3, 5, 6,
+	 */
+	reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+	    <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+	    <0xa03cf000 0x1000>;
+
+	prcmu_clk: prcmu-clock {
+		#clock-cells = <1>;
+	};
+
+	prcc_pclk: prcc-periph-clock {
+		#clock-cells = <2>;
+	};
+
+	prcc_kclk: prcc-kernel-clock {
+		#clock-cells = <2>;
+	};
+
+	rtc_clk: rtc32k-clock {
+		#clock-cells = <0>;
+	};
+
+	smp_twd_clk: smp-twd-clock {
+		#clock-cells = <0>;
+	};
+};

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -220,6 +220,13 @@ pm_domains: pm_domains0 {
 
 		clocks {
 			compatible = "stericsson,u8500-clks";
+			/*
+			 * Registers for the CLKRST block on peripheral
+			 * groups 1, 2, 3, 5, 6,
+			 */
+			reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+			    <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+			    <0xa03cf000 0x1000>;
 
 			prcmu_clk: prcmu-clock {
 				#clock-cells = <1>;

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -241,6 +241,7 @@ axi_gates: clk@01c2005c {
 			compatible = "allwinner,sun4i-a10-axi-gates-clk";
 			reg = <0x01c2005c 0x4>;
 			clocks = <&axi>;
+			clock-indices = <0>;
 			clock-output-names = "axi_dram";
 		};
 
@@ -257,17 +258,36 @@ ahb_gates: clk@01c20060 {
 			compatible = "allwinner,sun4i-a10-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<4>, <5>, <6>,
+					<7>, <8>, <9>,
+					<10>, <11>, <12>,
+					<13>, <14>, <16>,
+					<17>, <18>, <20>,
+					<21>, <22>, <23>,
+					<24>, <25>, <26>,
+					<32>, <33>, <34>,
+					<35>, <36>, <37>,
+					<40>, <41>, <43>,
+					<44>, <45>,
+					<46>, <47>,
+					<50>, <52>;
 			clock-output-names = "ahb_usb0", "ahb_ehci0",
-				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
-				"ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
-				"ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
-				"ahb_sdram", "ahb_ace",	"ahb_emac", "ahb_ts",
-				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
-				"ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
-				"ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
-				"ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
-				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
-				"ahb_de_fe1", "ahb_mp", "ahb_mali400";
+					     "ahb_ohci0", "ahb_ehci1",
+					     "ahb_ohci1", "ahb_ss", "ahb_dma",
+					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+					     "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+					     "ahb_nand", "ahb_sdram", "ahb_ace",
+					     "ahb_emac", "ahb_ts", "ahb_spi0",
+					     "ahb_spi1", "ahb_spi2", "ahb_spi3",
+					     "ahb_pata", "ahb_sata", "ahb_gps",
+					     "ahb_ve", "ahb_tvd", "ahb_tve0",
+					     "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
+					     "ahb_csi0", "ahb_csi1", "ahb_hdmi",
+					     "ahb_de_be0", "ahb_de_be1",
+					     "ahb_de_fe0", "ahb_de_fe1",
+					     "ahb_mp", "ahb_mali400";
 		};
 
 		apb0: apb0@01c20054 {
@@ -283,9 +303,14 @@ apb0_gates: clk@01c20068 {
 			compatible = "allwinner,sun4i-a10-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<5>, <6>,
+					<7>, <10>;
 			clock-output-names = "apb0_codec", "apb0_spdif",
-				"apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
-				"apb0_ir1", "apb0_keypad";
+					     "apb0_ac97", "apb0_iis",
+					     "apb0_pio", "apb0_ir0",
+					     "apb0_ir1", "apb0_keypad";
 		};
 
 		apb1: clk@01c20058 {
@@ -301,12 +326,22 @@ apb1_gates: clk@01c2006c {
 			compatible = "allwinner,sun4i-a10-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <1>,
+					<2>, <4>,
+					<5>, <6>,
+					<7>, <16>,
+					<17>, <18>,
+					<19>, <20>,
+					<21>, <22>,
+					<23>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_can", "apb1_scr",
-				"apb1_ps20", "apb1_ps21", "apb1_uart0",
-				"apb1_uart1", "apb1_uart2", "apb1_uart3",
-				"apb1_uart4", "apb1_uart5", "apb1_uart6",
-				"apb1_uart7";
+					     "apb1_i2c2", "apb1_can",
+					     "apb1_scr", "apb1_ps20",
+					     "apb1_ps21", "apb1_uart0",
+					     "apb1_uart1", "apb1_uart2",
+					     "apb1_uart3", "apb1_uart4",
+					     "apb1_uart5", "apb1_uart6",
+					     "apb1_uart7";
 		};
 
 		nand_clk: clk@01c20080 {

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -85,6 +85,17 @@ ahb_gates: clk@01c20060 {
 			compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
+			clock-indices = <0>, <1>,
+					<2>, <5>, <6>,
+					<7>, <8>, <9>,
+					<10>, <13>,
+					<14>, <17>, <18>,
+					<20>, <21>, <22>,
+					<26>, <28>, <32>,
+					<34>, <36>, <40>,
+					<43>, <44>,
+					<46>, <51>,
+					<52>;
 			clock-output-names = "ahb_usbotg", "ahb_ehci",
 					     "ahb_ohci", "ahb_ss", "ahb_dma",
 					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
@@ -103,6 +114,9 @@ apb0_gates: clk@01c20068 {
 			compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
+			clock-indices = <0>, <3>,
+					<5>, <6>,
+					<10>;
 			clock-output-names = "apb0_codec", "apb0_iis",
 					     "apb0_pio", "apb0_ir",
 					     "apb0_keypad";
@@ -113,9 +127,14 @@ apb1_gates: clk@01c2006c {
 			compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <1>,
+					<2>, <16>,
+					<17>, <18>,
+					<19>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_uart0", "apb1_uart1",
-				"apb1_uart2", "apb1_uart3";
+					     "apb1_i2c2", "apb1_uart0",
+					     "apb1_uart1", "apb1_uart2",
+					     "apb1_uart3";
 		};
 	};
 

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -104,6 +104,16 @@ ahb_gates: clk@01c20060 {
 			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
+			clock-indices = <0>, <1>,
+					<2>, <5>, <6>,
+					<7>, <8>, <9>,
+					<10>, <13>,
+					<14>, <20>,
+					<21>, <22>,
+				        <28>, <32>, <36>,
+				        <40>, <44>,
+					<46>, <51>,
+					<52>;
 			clock-output-names = "ahb_usbotg", "ahb_ehci",
 					     "ahb_ohci", "ahb_ss", "ahb_dma",
 					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
@@ -121,6 +131,8 @@ apb0_gates: clk@01c20068 {
 			compatible = "allwinner,sun5i-a13-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
+			clock-indices = <0>, <5>,
+					<6>;
 			clock-output-names = "apb0_codec", "apb0_pio",
 					     "apb0_ir";
 		};
@@ -130,8 +142,12 @@ apb1_gates: clk@01c2006c {
 			compatible = "allwinner,sun5i-a13-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <1>,
+					<2>, <17>,
+					<19>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_uart1", "apb1_uart3";
+					     "apb1_i2c2", "apb1_uart1",
+					     "apb1_uart3";
 		};
 	};
 };

arch/arm/boot/dts/sun5i.dtsi

@@ -178,6 +178,7 @@ axi_gates: clk@01c2005c {
 			compatible = "allwinner,sun4i-a10-axi-gates-clk";
 			reg = <0x01c2005c 0x4>;
 			clocks = <&axi>;
+			clock-indices = <0>;
 			clock-output-names = "axi_dram";
 		};
 

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -252,6 +252,20 @@ ahb1_gates: clk@01c20060 {
 			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb1>;
+			clock-indices = <1>, <5>,
+					<6>, <8>, <9>,
+					<10>, <11>, <12>,
+					<13>, <14>,
+					<17>, <18>, <19>,
+					<20>, <21>, <22>,
+					<23>, <24>, <26>,
+					<27>, <29>,
+					<30>, <31>, <32>,
+					<36>, <37>, <40>,
+					<43>, <44>, <45>,
+					<46>, <47>, <50>,
+					<52>, <55>, <56>,
+					<57>, <58>;
 			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
 					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
 					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
@@ -281,6 +295,9 @@ apb1_gates: clk@01c20068 {
 			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <4>,
+					<5>, <12>,
+					<13>;
 			clock-output-names = "apb1_codec", "apb1_digital_mic",
 					"apb1_pio", "apb1_daudio0",
 					"apb1_daudio1";
@@ -299,6 +316,10 @@ apb2_gates: clk@01c2006c {
 			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb2>;
+			clock-indices = <0>, <1>,
+					<2>, <3>, <16>,
+					<17>, <18>, <19>,
+					<20>, <21>;
 			clock-output-names = "apb2_i2c0", "apb2_i2c1",
 					     "apb2_i2c2", "apb2_i2c3",
 					     "apb2_uart0", "apb2_uart1",
@@ -384,6 +405,9 @@ usb_clk: clk@01c200cc {
 			compatible = "allwinner,sun6i-a31-usb-clk";
 			reg = <0x01c200cc 0x4>;
 			clocks = <&osc24M>;
+			clock-indices = <8>, <9>, <10>,
+					<16>, <17>,
+					<18>;
 			clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
 					     "usb_ohci0", "usb_ohci1",
 					     "usb_ohci2";

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -267,6 +267,19 @@ ahb_gates: clk@01c20060 {
 			compatible = "allwinner,sun7i-a20-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
+			clock-indices = <0>, <1>,
+					<2>, <3>, <4>,
+					<5>, <6>, <7>, <8>,
+					<9>, <10>, <11>, <12>,
+					<13>, <14>, <16>,
+					<17>, <18>, <20>, <21>,
+					<22>, <23>, <25>,
+					<28>, <32>, <33>, <34>,
+					<35>, <36>, <37>, <40>,
+					<41>, <42>, <43>,
+					<44>, <45>, <46>,
+					<47>, <49>, <50>,
+					<52>;
 			clock-output-names = "ahb_usb0", "ahb_ehci0",
 				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
 				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
@@ -295,6 +308,10 @@ apb0_gates: clk@01c20068 {
 			compatible = "allwinner,sun7i-a20-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
+			clock-indices = <0>, <1>,
+					<2>, <3>, <4>,
+					<5>, <6>, <7>,
+					<8>, <10>;
 			clock-output-names = "apb0_codec", "apb0_spdif",
 				"apb0_ac97", "apb0_iis0", "apb0_iis1",
 				"apb0_pio", "apb0_ir0", "apb0_ir1",
@@ -314,6 +331,12 @@ apb1_gates: clk@01c2006c {
 			compatible = "allwinner,sun7i-a20-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <1>,
+					<2>, <3>, <4>,
+					<5>, <6>, <7>,
+					<15>, <16>, <17>,
+					<18>, <19>, <20>,
+					<21>, <22>, <23>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
 				"apb1_i2c2", "apb1_i2c3", "apb1_can",
 				"apb1_scr", "apb1_ps20", "apb1_ps21",

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -180,6 +180,15 @@ ahb1_gates: clk@01c20060 {
 			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb1>;
+			clock-indices = <1>, <6>,
+					<8>, <9>, <10>,
+					<13>, <14>,
+					<19>, <20>,
+					<21>, <24>, <26>,
+					<29>, <32>, <36>,
+					<40>, <44>, <46>,
+					<52>, <54>,
+					<57>;
 			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
 					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
 					"ahb1_nand", "ahb1_sdram",
@@ -196,6 +205,8 @@ apb1_gates: clk@01c20068 {
 			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <5>,
+					<12>, <13>;
 			clock-output-names = "apb1_codec", "apb1_pio",
 					"apb1_daudio0",	"apb1_daudio1";
 		};
@@ -213,6 +224,10 @@ apb2_gates: clk@01c2006c {
 			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb2>;
+			clock-indices = <0>, <1>,
+					<2>, <16>,
+					<17>, <18>,
+					<19>, <20>;
 			clock-output-names = "apb2_i2c0", "apb2_i2c1",
 					"apb2_i2c2", "apb2_uart0",
 					"apb2_uart1", "apb2_uart2",

arch/arm/boot/dts/sun9i-a80.dtsi

@@ -277,9 +277,12 @@ ahb0_gates: clk@06000580 {
 			compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
 			reg = <0x06000580 0x4>;
 			clocks = <&ahb0>;
-			clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
-					<14>, <15>, <16>, <18>, <20>, <21>,
-					<22>, <23>;
+			clock-indices = <0>, <1>, <3>,
+					<5>, <8>, <12>,
+					<13>, <14>,
+					<15>, <16>, <18>,
+					<20>, <21>, <22>,
+					<23>;
 			clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
 					"ahb0_ss", "ahb0_sd", "ahb0_nand1",
 					"ahb0_nand0", "ahb0_sdram",
@@ -293,7 +296,10 @@ ahb1_gates: clk@06000584 {
 			compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
 			reg = <0x06000584 0x4>;
 			clocks = <&ahb1>;
-			clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
+			clock-indices = <0>, <1>,
+					<17>, <21>,
+					<22>, <23>,
+					<24>;
 			clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
 					"ahb1_gmac", "ahb1_msgbox",
 					"ahb1_spinlock", "ahb1_hstimer",
@@ -305,8 +311,9 @@ ahb2_gates: clk@06000588 {
 			compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
 			reg = <0x06000588 0x4>;
 			clocks = <&ahb2>;
-			clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
-					<11>;
+			clock-indices = <0>, <1>,
+					<2>, <4>, <5>,
+					<7>, <8>, <11>;
 			clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
 					"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
 					"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
@@ -317,8 +324,10 @@ apb0_gates: clk@06000590 {
 			compatible = "allwinner,sun9i-a80-apb0-gates-clk";
 			reg = <0x06000590 0x4>;
 			clocks = <&apb0>;
-			clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
-					<17>, <18>, <19>;
+			clock-indices = <1>, <5>,
+					<11>, <12>, <13>,
+					<15>, <17>, <18>,
+					<19>;
 			clock-output-names = "apb0_spdif", "apb0_pio",
 					"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
 					"apb0_lradc", "apb0_gpadc", "apb0_twd",
@@ -330,8 +339,11 @@ apb1_gates: clk@06000594 {
 			compatible = "allwinner,sun9i-a80-apb1-gates-clk";
 			reg = <0x06000594 0x4>;
 			clocks = <&apb1>;
-			clock-indices = <0>, <1>, <2>, <3>, <4>,
-					<16>, <17>, <18>, <19>, <20>, <21>;
+			clock-indices = <0>, <1>,
+					<2>, <3>, <4>,
+					<16>, <17>,
+					<18>, <19>,
+					<20>, <21>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
 					"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
 					"apb1_uart0", "apb1_uart1",

arch/arm/mach-at91/at91rm9200.c

@@ -8,7 +8,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 

arch/arm/mach-hisi/hisilicon.c

@@ -11,7 +11,6 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/irqchip.h>
 

arch/arm/mach-keystone/pm_domain.c

@@ -16,7 +16,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/pm_clock.h>
 #include <linux/platform_device.h>
-#include <linux/clk-provider.h>
 #include <linux/of.h>
 
 static struct dev_pm_domain keystone_pm_domain = {

arch/arm/mach-mvebu/board-v7.c

@@ -14,7 +14,6 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/clk-provider.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>

arch/arm/mach-omap2/Makefile

@@ -12,8 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
 
 hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
 					  omap_hwmod_common_data.o
-clock-common				= clock.o clock_common_data.o \
-					  clkt_dpll.o clkt_clksel.o
+clock-common				= clock.o
 secure-common				= omap-smc.o omap-secure.o
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
@@ -182,24 +181,17 @@ obj-$(CONFIG_SOC_DRA7XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_DRA7XX)		+= clockdomains7xx_data.o
 
 # Clock framework
-obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpllcore.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_virt_prcm_set.o
-obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpll.o clkt_iclk.o
-obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o
-obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpll.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3)		+= clkt34xx_dpll3m2.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
-obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
-obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= $(clock-common)
-obj-$(CONFIG_SOC_DRA7XX)		+= dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM43XX)		+= $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM43XX)		+= $(clock-common)
 
 # OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o

arch/arm/mach-omap2/clkt34xx_dpll3m2.c

@@ -23,12 +23,13 @@
 
 #include "clock.h"
 #include "clock3xxx.h"
-#include "clock34xx.h"
 #include "sdrc.h"
 #include "sram.h"
 
 #define CYCLES_PER_MHZ			1000000
 
+struct clk *sdrc_ick_p, *arm_fck_p;
+
 /*
  * CORE DPLL (DPLL3) M2 divider rate programming functions
  *
@@ -60,12 +61,14 @@ int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!clk || !rate)
 		return -EINVAL;
 
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	new_div = DIV_ROUND_UP(parent_rate, rate);
+	validrate = parent_rate / new_div;
+
 	if (validrate != rate)
 		return -EINVAL;
 
-	sdrcrate = __clk_get_rate(sdrc_ick_p);
-	clkrate = __clk_get_rate(hw->clk);
+	sdrcrate = clk_get_rate(sdrc_ick_p);
+	clkrate = clk_hw_get_rate(hw);
 	if (rate > clkrate)
 		sdrcrate <<= ((rate / clkrate) >> 1);
 	else
@@ -83,7 +86,7 @@ int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
 	/*
 	 * XXX This only needs to be done when the CPU frequency changes
 	 */
-	_mpurate = __clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
+	_mpurate = clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
 	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
 	c += 1;  /* for safety */
 	c *= SDRC_MPURATE_LOOPS;

arch/arm/mach-omap2/clock.h

@@ -23,90 +23,6 @@
 #include <linux/clk-provider.h>
 #include <linux/clk/ti.h>
 
-struct omap_clk {
-	u16				cpu;
-	struct clk_lookup		lk;
-};
-
-#define CLK(dev, con, ck)		\
-	{				\
-		.lk = {			\
-			.dev_id = dev,	\
-			.con_id = con,	\
-			.clk = ck,	\
-		},			\
-	}
-
-struct clockdomain;
-
-#define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)	\
-	static struct clk_core _name##_core = {			\
-		.name = #_name,					\
-		.hw = &_name##_hw.hw,				\
-		.parent_names = _parent_array_name,		\
-		.num_parents = ARRAY_SIZE(_parent_array_name),	\
-		.ops = &_clkops_name,				\
-	};							\
-	static struct clk _name = {				\
-		.core = &_name##_core,				\
-	};
-
-#define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name,	\
-				_clkops_name, _flags)		\
-	static struct clk_core _name##_core = {			\
-		.name = #_name,					\
-		.hw = &_name##_hw.hw,				\
-		.parent_names = _parent_array_name,		\
-		.num_parents = ARRAY_SIZE(_parent_array_name),	\
-		.ops = &_clkops_name,				\
-		.flags = _flags,				\
-	};							\
-	static struct clk _name = {				\
-		.core = &_name##_core,				\
-	};
-
-#define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name)		\
-	static struct clk_hw_omap _name##_hw = {		\
-		.hw = {						\
-			.clk = &_name,				\
-		},						\
-		.clkdm_name = _clkdm_name,			\
-	};
-
-#define DEFINE_CLK_OMAP_MUX(_name, _clkdm_name, _clksel,	\
-			    _clksel_reg, _clksel_mask,		\
-			    _parent_names, _ops)		\
-	static struct clk _name;				\
-	static struct clk_hw_omap _name##_hw = {		\
-		.hw = {						\
-			.clk = &_name,				\
-		},						\
-		.clksel		= _clksel,			\
-		.clksel_reg	= _clksel_reg,			\
-		.clksel_mask	= _clksel_mask,			\
-		.clkdm_name	= _clkdm_name,			\
-	};							\
-	DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-
-#define DEFINE_CLK_OMAP_MUX_GATE(_name, _clkdm_name, _clksel,	\
-				 _clksel_reg, _clksel_mask,	\
-				 _enable_reg, _enable_bit,	\
-				 _hwops, _parent_names, _ops)	\
-	static struct clk _name;				\
-	static struct clk_hw_omap _name##_hw = {		\
-		.hw = {						\
-			.clk = &_name,				\
-		},						\
-		.ops		= _hwops,			\
-		.enable_reg	= _enable_reg,			\
-		.enable_bit	= _enable_bit,			\
-		.clksel		= _clksel,			\
-		.clksel_reg	= _clksel_reg,			\
-		.clksel_mask	= _clksel_mask,			\
-		.clkdm_name	= _clkdm_name,			\
-	};							\
-	DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-
 /* struct clksel_rate.flags possibilities */
 #define RATE_IN_242X		(1 << 0)
 #define RATE_IN_243X		(1 << 1)
@@ -127,38 +43,6 @@ struct clockdomain;
 /* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
 #define RATE_IN_3430ES2PLUS_36XX	(RATE_IN_3430ES2PLUS | RATE_IN_36XX)
 
-
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
-	u32			val;
-	u8			div;
-	u16			flags;
-};
-
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
-	struct clk		 *parent;
-	const struct clksel_rate *rates;
-};
-
 /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
 #define CORE_CLK_SRC_32K		0x0
 #define CORE_CLK_SRC_DPLL		0x1
@@ -180,105 +64,18 @@ struct clksel {
 #define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
 #define OMAP4XXX_EN_DPLL_LOCKED			0x7
 
-u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
-void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
-void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
-void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk);
-void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk);
-
-void __init omap2_clk_disable_clkdm_control(void);
-
-/* clkt_clksel.c public functions */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
-				unsigned long target_rate,
-				u32 *new_div);
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw);
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate);
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
-				unsigned long *parent_rate);
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate);
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
-
-/* clkt_iclk.c public functions */
-extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
-extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
-
-unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
-				   void __iomem **other_reg,
-				   u8 *other_bit);
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
-				void __iomem **idlest_reg,
-				u8 *idlest_bit, u8 *idlest_val);
-int omap2_clk_enable_autoidle_all(void);
-int omap2_clk_allow_idle(struct clk *clk);
-int omap2_clk_deny_idle(struct clk *clk);
-int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
 void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
 			       const char *mpu_ck_name);
 
-u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg);
-void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
-
 extern u16 cpu_mask;
 
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features {
-	u32 flags;
-	long fint_min;
-	long fint_max;
-	long fint_band1_max;
-	long fint_band2_min;
-	u8 dpll_bypass_vals;
-	u8 cm_idlest_val;
-};
-
-#define TI_CLK_DPLL_HAS_FREQSEL		(1 << 0)
-#define TI_CLK_DPLL4_DENY_REPROGRAM	(1 << 1)
-
-extern struct ti_clk_features ti_clk_features;
-
 extern const struct clkops clkops_omap2_dflt_wait;
 extern const struct clkops clkops_omap2_dflt;
 
 extern struct clk_functions omap2_clk_functions;
 
-extern const struct clksel_rate gpt_32k_rates[];
-extern const struct clksel_rate gpt_sys_rates[];
-extern const struct clksel_rate gfx_l3_rates[];
-extern const struct clksel_rate dsp_ick_rates[];
-
-extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
-extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_apll54;
-extern const struct clk_hw_omap_ops clkhwops_apll96;
-
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-extern const struct clksel_rate div_1_0_rates[];
-extern const struct clksel_rate div3_1to4_rates[];
-extern const struct clksel_rate div_1_1_rates[];
-extern const struct clksel_rate div_1_2_rates[];
-extern const struct clksel_rate div_1_3_rates[];
-extern const struct clksel_rate div_1_4_rates[];
-extern const struct clksel_rate div31_1to31_rates[];
-
-extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
-
-struct regmap;
-
-int __init omap2_clk_provider_init(struct device_node *np, int index,
-				   struct regmap *syscon, void __iomem *mem);
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+int __init omap2_clk_setup_ll_ops(void);
 
 void __init ti_clk_init_features(void);
 #endif

arch/arm/mach-omap2/clock2430.c

-/*
- * clock2430.c - OMAP2430-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx.h"
-#include "cm-regbits-24xx.h"
-
-/**
- * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
- * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
- * passes back the correct CM_IDLEST register address for I2CHS
- * modules.  No return value.
- */
-static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
-					   void __iomem **idlest_reg,
-					   u8 *idlest_bit,
-					   u8 *idlest_val)
-{
-	*idlest_reg = OMAP2430_CM_REGADDR(CORE_MOD, CM_IDLEST);
-	*idlest_bit = clk->enable_bit;
-	*idlest_val = OMAP24XX_CM_IDLEST_VAL;
-}
-
-/* 2430 I2CHS has non-standard IDLEST register */
-const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
-	.find_idlest	= omap2430_clk_i2chs_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};

arch/arm/mach-omap2/clock2xxx.c

-/*
- * clock2xxx.c - OMAP2xxx-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
-
-struct clk_hw *dclk_hw;
-/*
- * Omap24xx specific clock functions
- */
-
-/*
- * Switch the MPU rate if specified on cmdline.  We cannot do this
- * early until cmdline is parsed.  XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap2xxx_clk_arch_init(void)
-{
-	int ret;
-
-	if (!cpu_is_omap24xx())
-		return 0;
-
-	ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set");
-	if (!ret)
-		omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck");
-
-	return ret;
-}
-
-omap_arch_initcall(omap2xxx_clk_arch_init);
-
-

arch/arm/mach-omap2/clock34xx.c

-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock34xx.h"
-#include "cm3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/**
- * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
- * from the CM_{I,F}CLKEN bit.  Pass back the correct info via
- * @idlest_reg and @idlest_bit.  No return value.
- */
-static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit,
-					    u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
-	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = {
-	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
- * target IDLEST bits.  For our purposes, we are concerned with the
- * target IDLEST bits, which exist at a different bit position than
- * the *CLKEN bit position for these modules (DSS and USBHOST) (The
- * default find_idlest code assumes that they are at the same
- * position.)  No return value.
- */
-static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
-						    void __iomem **idlest_reg,
-						    u8 *idlest_bit,
-						    u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	/* USBHOST_IDLE has same shift */
-	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
-	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
-	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
- * shift from the CM_{I,F}CLKEN bit.  Pass back the correct info via
- * @idlest_reg and @idlest_bit.  No return value.
- */
-static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
-						 void __iomem **idlest_reg,
-						 u8 *idlest_bit,
-						 u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
-	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
-	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};

arch/arm/mach-omap2/clock34xx.h

-/*
- * OMAP34xx clock function prototypes and macros
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-
-extern const struct clkops clkops_omap3430es2_ssi_wait;
-extern const struct clkops clkops_omap3430es2_iclk_ssi_wait;
-extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
-extern const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait;
-
-#endif

arch/arm/mach-omap2/clock3517.c

-/*
- * OMAP3517/3505-specific clock framework functions
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2011 Nokia Corporation
- *
- * Ranjith Lohithakshan
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock3517.h"
-#include "cm3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
- * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
- * at an offset of 4 from ICK enable bit.
- */
-#define AM35XX_IPSS_ICK_MASK			0xF
-#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 		0x4
-#define AM35XX_IPSS_ICK_FCK_OFFSET		0x8
-#define AM35XX_IPSS_CLK_IDLEST_VAL		0
-
-/**
- * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The interface clocks on AM35xx IPSS reflects the clock idle status
- * in the enable register itsel at a bit offset of 4 from the enable
- * bit. A value of 1 indicates that clock is enabled.
- */
-static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit,
-					    u8 *idlest_val)
-{
-	*idlest_reg = (__force void __iomem *)(clk->enable_reg);
-	*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
-	*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
-}
-
-/**
- * am35xx_clk_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Some clocks don't have companion clocks.  For example, modules with
- * only an interface clock (such as HECC) don't have a companion
- * clock.  Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active.  Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts.  No return value.
- */
-static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
-				      void __iomem **other_reg,
-				      u8 *other_bit)
-{
-	*other_reg = (__force void __iomem *)(clk->enable_reg);
-	if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
-		*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
-	else
-		*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
-}
-const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
-	.find_idlest	= am35xx_clk_find_idlest,
-	.find_companion	= am35xx_clk_find_companion,
-};
-
-/**
- * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The IPSS target CM_IDLEST bit is at a different shift from the
- * CM_{I,F}CLKEN bit.  Pass back the correct info via @idlest_reg
- * and @idlest_bit.  No return value.
- */
-static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit,
-					    u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	*idlest_bit = AM35XX_ST_IPSS_SHIFT;
-	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-	.find_idlest	= am35xx_clk_ipss_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};

arch/arm/mach-omap2/clock3517.h

-/*
- * OMAP3517/3505 clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-
-extern const struct clkops clkops_am35xx_ipss_module_wait;
-extern const struct clkops clkops_am35xx_ipss_wait;
-
-#endif

arch/arm/mach-omap2/clock36xx.c

-/*
- * OMAP36xx-specific clkops
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- *
- * Mike Turquette
- * Vijaykumar GN
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock36xx.h"
-#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
-
-/**
- * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
- *         from HSDivider PWRDN problem Implements Errata ID: i556.
- * @clk: DPLL output struct clk
- *
- * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
- * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
- * valueafter their respective PWRDN bits are set.  Any dummy write
- * (Any other value different from the Read value) to the
- * corresponding CM_CLKSEL register will refresh the dividers.
- */
-int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
-{
-	struct clk_divider *parent;
-	struct clk_hw *parent_hw;
-	u32 dummy_v, orig_v;
-	struct clk_hw_omap *omap_clk = to_clk_hw_omap(clk);
-	int ret;
-
-	/* Clear PWRDN bit of HSDIVIDER */
-	ret = omap2_dflt_clk_enable(clk);
-
-	parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
-	parent = to_clk_divider(parent_hw);
-
-	/* Restore the dividers */
-	if (!ret) {
-		orig_v = omap2_clk_readl(omap_clk, parent->reg);
-		dummy_v = orig_v;
-
-		/* Write any other value different from the Read value */
-		dummy_v ^= (1 << parent->shift);
-		omap2_clk_writel(dummy_v, omap_clk, parent->reg);
-
-		/* Write the original divider */
-		omap2_clk_writel(orig_v, omap_clk, parent->reg);
-	}
-
-	return ret;
-}

arch/arm/mach-omap2/clock36xx.h

-/*
- * OMAP36xx clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-
-extern int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *hw);
-
-#endif

arch/arm/mach-omap2/clock3xxx.c

-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST		120000000
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
-
-/**
- * omap3_dpll4_set_rate - set rate for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- *
- * Check if the current SoC supports the per-dpll reprogram operation
- * or not, and then do the rate change if supported. Returns -EINVAL
- * if not supported, 0 for success, and potential error codes from the
- * clock rate change.
- */
-int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate)
-{
-	/*
-	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
-	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
-	 * on DPLL4.
-	 */
-	if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
-		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
-		return -EINVAL;
-	}
-
-	return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
-}
-
-/**
- * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- * @index: parent index, 0 - reference clock, 1 - bypass clock
- *
- * Check if the current SoC support the per-dpll reprogram operation
- * or not, and then do the rate + parent change if supported. Returns
- * -EINVAL if not supported, 0 for success, and potential error codes
- * from the clock rate change.
- */
-int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
-				    unsigned long parent_rate, u8 index)
-{
-	if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
-		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
-		return -EINVAL;
-	}
-
-	return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
-						      index);
-}
-
-void __init omap3_clk_lock_dpll5(void)
-{
-	struct clk *dpll5_clk;
-	struct clk *dpll5_m2_clk;
-
-	dpll5_clk = clk_get(NULL, "dpll5_ck");
-	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
-	clk_prepare_enable(dpll5_clk);
-
-	/* Program dpll5_m2_clk divider for no division */
-	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
-	clk_prepare_enable(dpll5_m2_clk);
-	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
-	clk_disable_unprepare(dpll5_m2_clk);
-	clk_disable_unprepare(dpll5_clk);
-	return;
-}
-
-/* Common clock code */
-
-/*
- * Switch the MPU rate if specified on cmdline.  We cannot do this
- * early until cmdline is parsed.  XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap3xxx_clk_arch_init(void)
-{
-	int ret;
-
-	if (!cpu_is_omap34xx())
-		return 0;
-
-	ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
-	if (!ret)
-		omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck");
-
-	return ret;
-}
-
-omap_arch_initcall(omap3xxx_clk_arch_init);
-
-

arch/arm/mach-omap2/clock44xx.h

-/*
- * OMAP4 clock function prototypes and macros
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-
-/*
- * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is
- *    set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM
- *    vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters")
- */
-#define OMAP4430_REGM4XEN_MULT	4
-
-int omap4xxx_clk_init(void);
-
-#endif

arch/arm/mach-omap2/clock_common_data.c

-/*
- *  linux/arch/arm/mach-omap2/clock_common_data.c
- *
- *  Copyright (C) 2005-2009 Texas Instruments, Inc.
- *  Copyright (C) 2004-2009 Nokia Corporation
- *
- *  Contacts:
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains clock data that is common to both the OMAP2xxx and
- * OMAP3xxx clock definition files.
- */
-
-#include "clock.h"
-
-/* clksel_rate data common to 24xx/343x */
-const struct clksel_rate gpt_32k_rates[] = {
-	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
-	 { .div = 0 }
-};
-
-const struct clksel_rate gpt_sys_rates[] = {
-	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
-	 { .div = 0 }
-};
-
-const struct clksel_rate gfx_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-const struct clksel_rate dsp_ick_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_243X },
-	{ .div = 0 },
-};
-
-
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-
-const struct clksel_rate div_1_0_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 0 },
-};
-
-const struct clksel_rate div3_1to4_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 4, .val = 2, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-const struct clksel_rate div_1_1_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 0 },
-};
-
-const struct clksel_rate div_1_2_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 0 },
-};
-
-const struct clksel_rate div_1_3_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 0 },
-};
-
-const struct clksel_rate div_1_4_rates[] = {
-	{ .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 0 },
-};
-
-const struct clksel_rate div31_1to31_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 0 },
-};

arch/arm/mach-omap2/io.c

@@ -37,7 +37,6 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "clock3xxx.h"
-#include "clock44xx.h"
 #include "omap-pm.h"
 #include "sdrc.h"
 #include "control.h"
@@ -723,6 +722,8 @@ int __init omap_clk_init(void)
 
 	ti_clk_init_features();
 
+	omap2_clk_setup_ll_ops();
+
 	if (of_have_populated_dt()) {
 		ret = omap_control_init();
 		if (ret)

arch/arm/mach-omap2/omap_hwmod.c

@@ -130,6 +130,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/err.h>

arch/arm/mach-omap2/pm24xx.c

@@ -25,6 +25,7 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/irq.h>
 #include <linux/time.h>

arch/arm/mach-orion5x/board-dt.c

@@ -16,7 +16,6 @@
 #include <linux/of_platform.h>
 #include <linux/cpu.h>
 #include <linux/mbus.h>
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <asm/system_misc.h>
 #include <asm/mach/arch.h>

arch/arm/mach-s3c64xx/common.c

@@ -21,7 +21,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/clk-provider.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>

arch/arm/mach-tegra/Kconfig

@@ -8,6 +8,7 @@ menuconfig ARCH_TEGRA
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL
+	select PM_OPP
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
 	select SOC_BUS

arch/arm/mach-ux500/cpu.c

@@ -72,21 +72,12 @@ void __init ux500_init_irq(void)
 	 * Init clocks here so that they are available for system timer
 	 * initialization.
 	 */
-	if (cpu_is_u8500_family()) {
-		u8500_of_clk_init(U8500_CLKRST1_BASE,
-				  U8500_CLKRST2_BASE,
-				  U8500_CLKRST3_BASE,
-				  U8500_CLKRST5_BASE,
-				  U8500_CLKRST6_BASE);
-	} else if (cpu_is_u9540()) {
-		u9540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
-			       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
-			       U8500_CLKRST6_BASE);
-	} else if (cpu_is_u8540()) {
-		u8540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
-			       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
-			       U8500_CLKRST6_BASE);
-	}
+	if (cpu_is_u8500_family())
+		u8500_clk_init();
+	else if (cpu_is_u9540())
+		u9540_clk_init();
+	else if (cpu_is_u8540())
+		u8540_clk_init();
 }
 
 static const char * __init ux500_get_machine(void)

arch/arm64/kernel/setup.c

@@ -34,7 +34,6 @@
 #include <linux/kexec.h>
 #include <linux/crash_dump.h>
 #include <linux/root_dev.h>
-#include <linux/clk-provider.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>

arch/mips/alchemy/common/clock.c

@@ -35,6 +35,7 @@
 
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/slab.h>
@@ -389,12 +390,11 @@ static long alchemy_calc_div(unsigned long rate, unsigned long prate,
 	return div1;
 }
 
-static long alchemy_clk_fgcs_detr(struct clk_hw *hw, unsigned long rate,
-					unsigned long *best_parent_rate,
-					struct clk_hw **best_parent_clk,
-					int scale, int maxdiv)
+static int alchemy_clk_fgcs_detr(struct clk_hw *hw,
+				 struct clk_rate_request *req,
+				 int scale, int maxdiv)
 {
-	struct clk *pc, *bpc, *free;
+	struct clk_hw *pc, *bpc, *free;
 	long tdv, tpr, pr, nr, br, bpr, diff, lastdiff;
 	int j;
 
@@ -408,7 +408,7 @@ static long alchemy_clk_fgcs_detr(struct clk_hw *hw, unsigned long rate,
 	 * the one that gets closest to but not over the requested rate.
 	 */
 	for (j = 0; j < 7; j++) {
-		pc = clk_get_parent_by_index(hw->clk, j);
+		pc = clk_hw_get_parent_by_index(hw, j);
 		if (!pc)
 			break;
 
@@ -416,20 +416,20 @@ static long alchemy_clk_fgcs_detr(struct clk_hw *hw, unsigned long rate,
 		 * XXX: we would actually want clk_has_active_children()
 		 * but this is a good-enough approximation for now.
 		 */
-		if (!__clk_is_prepared(pc)) {
+		if (!clk_hw_is_prepared(pc)) {
 			if (!free)
 				free = pc;
 		}
 
-		pr = clk_get_rate(pc);
-		if (pr < rate)
+		pr = clk_hw_get_rate(pc);
+		if (pr < req->rate)
 			continue;
 
 		/* what can hardware actually provide */
-		tdv = alchemy_calc_div(rate, pr, scale, maxdiv, NULL);
+		tdv = alchemy_calc_div(req->rate, pr, scale, maxdiv, NULL);
 		nr = pr / tdv;
-		diff = rate - nr;
-		if (nr > rate)
+		diff = req->rate - nr;
+		if (nr > req->rate)
 			continue;
 
 		if (diff < lastdiff) {
@@ -448,15 +448,16 @@ static long alchemy_clk_fgcs_detr(struct clk_hw *hw, unsigned long rate,
 	 */
 	if (lastdiff && free) {
 		for (j = (maxdiv == 4) ? 1 : scale; j <= maxdiv; j += scale) {
-			tpr = rate * j;
+			tpr = req->rate * j;
 			if (tpr < 0)
 				break;
-			pr = clk_round_rate(free, tpr);
+			pr = clk_hw_round_rate(free, tpr);
 
-			tdv = alchemy_calc_div(rate, pr, scale, maxdiv, NULL);
+			tdv = alchemy_calc_div(req->rate, pr, scale, maxdiv,
+					       NULL);
 			nr = pr / tdv;
-			diff = rate - nr;
-			if (nr > rate)
+			diff = req->rate - nr;
+			if (nr > req->rate)
 				continue;
 			if (diff < lastdiff) {
 				lastdiff = diff;
@@ -469,9 +470,14 @@ static long alchemy_clk_fgcs_detr(struct clk_hw *hw, unsigned long rate,
 		}
 	}
 
-	*best_parent_rate = bpr;
-	*best_parent_clk = __clk_get_hw(bpc);
-	return br;
+	if (br < 0)
+		return br;
+
+	req->best_parent_rate = bpr;
+	req->best_parent_hw = bpc;
+	req->rate = br;
+
+	return 0;
 }
 
 static int alchemy_clk_fgv1_en(struct clk_hw *hw)
@@ -562,14 +568,10 @@ static unsigned long alchemy_clk_fgv1_recalc(struct clk_hw *hw,
 	return parent_rate / v;
 }
 
-static long alchemy_clk_fgv1_detr(struct clk_hw *hw, unsigned long rate,
-					unsigned long min_rate,
-					unsigned long max_rate,
-					unsigned long *best_parent_rate,
-					struct clk_hw **best_parent_clk)
+static int alchemy_clk_fgv1_detr(struct clk_hw *hw,
+				 struct clk_rate_request *req)
 {
-	return alchemy_clk_fgcs_detr(hw, rate, best_parent_rate,
-				     best_parent_clk, 2, 512);
+	return alchemy_clk_fgcs_detr(hw, req, 2, 512);
 }
 
 /* Au1000, Au1100, Au15x0, Au12x0 */
@@ -696,11 +698,8 @@ static unsigned long alchemy_clk_fgv2_recalc(struct clk_hw *hw,
 	return t;
 }
 
-static long alchemy_clk_fgv2_detr(struct clk_hw *hw, unsigned long rate,
-					unsigned long min_rate,
-					unsigned long max_rate,
-					unsigned long *best_parent_rate,
-					struct clk_hw **best_parent_clk)
+static int alchemy_clk_fgv2_detr(struct clk_hw *hw,
+				 struct clk_rate_request *req)
 {
 	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
 	int scale, maxdiv;
@@ -713,8 +712,7 @@ static long alchemy_clk_fgv2_detr(struct clk_hw *hw, unsigned long rate,
 		maxdiv = 512;
 	}
 
-	return alchemy_clk_fgcs_detr(hw, rate, best_parent_rate,
-				     best_parent_clk, scale, maxdiv);
+	return alchemy_clk_fgcs_detr(hw, req, scale, maxdiv);
 }
 
 /* Au1300 larger input mux, no separate disable bit, flexible divider */
@@ -917,17 +915,13 @@ static int alchemy_clk_csrc_setr(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-static long alchemy_clk_csrc_detr(struct clk_hw *hw, unsigned long rate,
-					unsigned long min_rate,
-					unsigned long max_rate,
-					unsigned long *best_parent_rate,
-					struct clk_hw **best_parent_clk)
+static int alchemy_clk_csrc_detr(struct clk_hw *hw,
+				 struct clk_rate_request *req)
 {
 	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
 	int scale = c->dt[2] == 3 ? 1 : 2; /* au1300 check */
 
-	return alchemy_clk_fgcs_detr(hw, rate, best_parent_rate,
-				     best_parent_clk, scale, 4);
+	return alchemy_clk_fgcs_detr(hw, req, scale, 4);
 }
 
 static struct clk_ops alchemy_clkops_csrc = {

arch/powerpc/platforms/512x/clock-commonclk.c

@@ -12,6 +12,7 @@
  */
 
 #include <linux/bitops.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/device.h>

drivers/acpi/acpi_apd.c

@@ -16,7 +16,6 @@
 #include <linux/clkdev.h>
 #include <linux/acpi.h>
 #include <linux/err.h>
-#include <linux/clk.h>
 #include <linux/pm.h>
 
 #include "internal.h"

drivers/acpi/acpi_lpss.c

@@ -11,7 +11,6 @@
  */
 
 #include <linux/acpi.h>
-#include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/err.h>

drivers/clk/Makefile

@@ -9,7 +9,7 @@ obj-$(CONFIG_COMMON_CLK)	+= clk-gate.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-mux.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-fractional-divider.o
-obj-$(CONFIG_COMMON_CLK)	+= clk-gpio-gate.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-gpio.o
 ifeq ($(CONFIG_OF), y)
 obj-$(CONFIG_COMMON_CLK)	+= clk-conf.o
 endif

drivers/clk/at91/clk-main.c

@@ -614,17 +614,12 @@ void __init of_at91sam9x5_clk_main_setup(struct device_node *np,
 	int num_parents;
 	unsigned int irq;
 	const char *name = np->name;
-	int i;
 
 	num_parents = of_clk_get_parent_count(np);
 	if (num_parents <= 0 || num_parents > 2)
 		return;
 
-	for (i = 0; i < num_parents; ++i) {
-		parent_names[i] = of_clk_get_parent_name(np, i);
-		if (!parent_names[i])
-			return;
-	}
+	of_clk_parent_fill(np, parent_names, num_parents);
 
 	of_property_read_string(np, "clock-output-names", &name);
 

drivers/clk/at91/clk-master.c

@@ -222,7 +222,6 @@ of_at91_clk_master_setup(struct device_node *np, struct at91_pmc *pmc,
 {
 	struct clk *clk;
 	int num_parents;
-	int i;
 	unsigned int irq;
 	const char *parent_names[MASTER_SOURCE_MAX];
 	const char *name = np->name;
@@ -232,11 +231,7 @@ of_at91_clk_master_setup(struct device_node *np, struct at91_pmc *pmc,
 	if (num_parents <= 0 || num_parents > MASTER_SOURCE_MAX)
 		return;
 
-	for (i = 0; i < num_parents; ++i) {
-		parent_names[i] = of_clk_get_parent_name(np, i);
-		if (!parent_names[i])
-			return;
-	}
+	of_clk_parent_fill(np, parent_names, num_parents);
 
 	of_property_read_string(np, "clock-output-names", &name);
 

drivers/clk/at91/clk-peripheral.c

@@ -134,7 +134,7 @@ at91_clk_register_peripheral(struct at91_pmc *pmc, const char *name,
 
 static void clk_sam9x5_peripheral_autodiv(struct clk_sam9x5_peripheral *periph)
 {
-	struct clk *parent;
+	struct clk_hw *parent;
 	unsigned long parent_rate;
 	int shift = 0;
 
@@ -142,8 +142,8 @@ static void clk_sam9x5_peripheral_autodiv(struct clk_sam9x5_peripheral *periph)
 		return;
 
 	if (periph->range.max) {
-		parent = clk_get_parent_by_index(periph->hw.clk, 0);
-		parent_rate = __clk_get_rate(parent);
+		parent = clk_hw_get_parent_by_index(&periph->hw, 0);
+		parent_rate = clk_hw_get_rate(parent);
 		if (!parent_rate)
 			return;
 

drivers/clk/at91/clk-programmable.c

@@ -54,46 +54,47 @@ static unsigned long clk_programmable_recalc_rate(struct clk_hw *hw,
 	return parent_rate >> pres;
 }
 
-static long clk_programmable_determine_rate(struct clk_hw *hw,
-					    unsigned long rate,
-					    unsigned long min_rate,
-					    unsigned long max_rate,
-					    unsigned long *best_parent_rate,
-					    struct clk_hw **best_parent_hw)
+static int clk_programmable_determine_rate(struct clk_hw *hw,
+					   struct clk_rate_request *req)
 {
-	struct clk *parent = NULL;
+	struct clk_hw *parent;
 	long best_rate = -EINVAL;
 	unsigned long parent_rate;
 	unsigned long tmp_rate;
 	int shift;
 	int i;
 
-	for (i = 0; i < __clk_get_num_parents(hw->clk); i++) {
-		parent = clk_get_parent_by_index(hw->clk, i);
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+		parent = clk_hw_get_parent_by_index(hw, i);
 		if (!parent)
 			continue;
 
-		parent_rate = __clk_get_rate(parent);
+		parent_rate = clk_hw_get_rate(parent);
 		for (shift = 0; shift < PROG_PRES_MASK; shift++) {
 			tmp_rate = parent_rate >> shift;
-			if (tmp_rate <= rate)
+			if (tmp_rate <= req->rate)
 				break;
 		}
 
-		if (tmp_rate > rate)
+		if (tmp_rate > req->rate)
 			continue;
 
-		if (best_rate < 0 || (rate - tmp_rate) < (rate - best_rate)) {
+		if (best_rate < 0 ||
+		    (req->rate - tmp_rate) < (req->rate - best_rate)) {
 			best_rate = tmp_rate;
-			*best_parent_rate = parent_rate;
-			*best_parent_hw = __clk_get_hw(parent);
+			req->best_parent_rate = parent_rate;
+			req->best_parent_hw = parent;
 		}
 
 		if (!best_rate)
 			break;
 	}
 
-	return best_rate;
+	if (best_rate < 0)
+		return best_rate;
+
+	req->rate = best_rate;
+	return 0;
 }
 
 static int clk_programmable_set_parent(struct clk_hw *hw, u8 index)
@@ -230,7 +231,6 @@ of_at91_clk_prog_setup(struct device_node *np, struct at91_pmc *pmc,
 {
 	int num;
 	u32 id;
-	int i;
 	struct clk *clk;
 	int num_parents;
 	const char *parent_names[PROG_SOURCE_MAX];
@@ -241,11 +241,7 @@ of_at91_clk_prog_setup(struct device_node *np, struct at91_pmc *pmc,
 	if (num_parents <= 0 || num_parents > PROG_SOURCE_MAX)
 		return;
 
-	for (i = 0; i < num_parents; ++i) {
-		parent_names[i] = of_clk_get_parent_name(np, i);
-		if (!parent_names[i])
-			return;
-	}
+	of_clk_parent_fill(np, parent_names, num_parents);
 
 	num = of_get_child_count(np);
 	if (!num || num > (PROG_ID_MAX + 1))

drivers/clk/at91/clk-slow.c

@@ -10,8 +10,10 @@
  *
  */
 
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
+#include <linux/slab.h>
 #include <linux/clk/at91_pmc.h>
 #include <linux/delay.h>
 #include <linux/of.h>
@@ -371,17 +373,12 @@ void __init of_at91sam9x5_clk_slow_setup(struct device_node *np,
 	const char *parent_names[2];
 	int num_parents;
 	const char *name = np->name;
-	int i;
 
 	num_parents = of_clk_get_parent_count(np);
 	if (num_parents <= 0 || num_parents > 2)
 		return;
 
-	for (i = 0; i < num_parents; ++i) {
-		parent_names[i] = of_clk_get_parent_name(np, i);
-		if (!parent_names[i])
-			return;
-	}
+	of_clk_parent_fill(np, parent_names, num_parents);
 
 	of_property_read_string(np, "clock-output-names", &name);
 
@@ -449,17 +446,12 @@ void __init of_at91sam9260_clk_slow_setup(struct device_node *np,
 	const char *parent_names[2];
 	int num_parents;
 	const char *name = np->name;
-	int i;
 
 	num_parents = of_clk_get_parent_count(np);
 	if (num_parents != 2)
 		return;
 
-	for (i = 0; i < num_parents; ++i) {
-		parent_names[i] = of_clk_get_parent_name(np, i);
-		if (!parent_names[i])
-			return;
-	}
+	of_clk_parent_fill(np, parent_names, num_parents);
 
 	of_property_read_string(np, "clock-output-names", &name);
 

drivers/clk/at91/clk-smd.c

@@ -145,7 +145,6 @@ void __init of_at91sam9x5_clk_smd_setup(struct device_node *np,
 					struct at91_pmc *pmc)
 {
 	struct clk *clk;
-	int i;
 	int num_parents;
 	const char *parent_names[SMD_SOURCE_MAX];
 	const char *name = np->name;
@@ -154,11 +153,7 @@ void __init of_at91sam9x5_clk_smd_setup(struct device_node *np,
 	if (num_parents <= 0 || num_parents > SMD_SOURCE_MAX)
 		return;
 
-	for (i = 0; i < num_parents; i++) {
-		parent_names[i] = of_clk_get_parent_name(np, i);
-		if (!parent_names[i])
-			return;
-	}
+	of_clk_parent_fill(np, parent_names, num_parents);
 
 	of_property_read_string(np, "clock-output-names", &name);
 

drivers/clk/at91/clk-usb.c

@@ -56,47 +56,43 @@ static unsigned long at91sam9x5_clk_usb_recalc_rate(struct clk_hw *hw,
 	return DIV_ROUND_CLOSEST(parent_rate, (usbdiv + 1));
 }
 
-static long at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
-					      unsigned long rate,
-					      unsigned long min_rate,
-					      unsigned long max_rate,
-					      unsigned long *best_parent_rate,
-					      struct clk_hw **best_parent_hw)
+static int at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
+					     struct clk_rate_request *req)
 {
-	struct clk *parent = NULL;
+	struct clk_hw *parent;
 	long best_rate = -EINVAL;
 	unsigned long tmp_rate;
 	int best_diff = -1;
 	int tmp_diff;
 	int i;
 
-	for (i = 0; i < __clk_get_num_parents(hw->clk); i++) {
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
 		int div;
 
-		parent = clk_get_parent_by_index(hw->clk, i);
+		parent = clk_hw_get_parent_by_index(hw, i);
 		if (!parent)
 			continue;
 
 		for (div = 1; div < SAM9X5_USB_MAX_DIV + 2; div++) {
 			unsigned long tmp_parent_rate;
 
-			tmp_parent_rate = rate * div;
-			tmp_parent_rate = __clk_round_rate(parent,
+			tmp_parent_rate = req->rate * div;
+			tmp_parent_rate = clk_hw_round_rate(parent,
 							   tmp_parent_rate);
 			tmp_rate = DIV_ROUND_CLOSEST(tmp_parent_rate, div);
-			if (tmp_rate < rate)
-				tmp_diff = rate - tmp_rate;
+			if (tmp_rate < req->rate)
+				tmp_diff = req->rate - tmp_rate;
 			else
-				tmp_diff = tmp_rate - rate;
+				tmp_diff = tmp_rate - req->rate;
 
 			if (best_diff < 0 || best_diff > tmp_diff) {
 				best_rate = tmp_rate;
 				best_diff = tmp_diff;
-				*best_parent_rate = tmp_parent_rate;
-				*best_parent_hw = __clk_get_hw(parent);
+				req->best_parent_rate = tmp_parent_rate;
+				req->best_parent_hw = parent;
 			}
 
-			if (!best_diff || tmp_rate < rate)
+			if (!best_diff || tmp_rate < req->rate)
 				break;
 		}
 
@@ -104,7 +100,11 @@ static long at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
 			break;
 	}
 
-	return best_rate;
+	if (best_rate < 0)
+		return best_rate;
+
+	req->rate = best_rate;
+	return 0;
 }
 
 static int at91sam9x5_clk_usb_set_parent(struct clk_hw *hw, u8 index)
@@ -273,7 +273,7 @@ static long at91rm9200_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate,
 					  unsigned long *parent_rate)
 {
 	struct at91rm9200_clk_usb *usb = to_at91rm9200_clk_usb(hw);
-	struct clk *parent = __clk_get_parent(hw->clk);
+	struct clk_hw *parent = clk_hw_get_parent(hw);
 	unsigned long bestrate = 0;
 	int bestdiff = -1;
 	unsigned long tmprate;
@@ -287,7 +287,7 @@ static long at91rm9200_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate,
 			continue;
 
 		tmp_parent_rate = rate * usb->divisors[i];
-		tmp_parent_rate = __clk_round_rate(parent, tmp_parent_rate);
+		tmp_parent_rate = clk_hw_round_rate(parent, tmp_parent_rate);
 		tmprate = DIV_ROUND_CLOSEST(tmp_parent_rate, usb->divisors[i]);
 		if (tmprate < rate)
 			tmpdiff = rate - tmprate;
@@ -373,7 +373,6 @@ void __init of_at91sam9x5_clk_usb_setup(struct device_node *np,
 					struct at91_pmc *pmc)
 {
 	struct clk *clk;
-	int i;
 	int num_parents;
 	const char *parent_names[USB_SOURCE_MAX];
 	const char *name = np->name;
@@ -382,11 +381,7 @@ void __init of_at91sam9x5_clk_usb_setup(struct device_node *np,
 	if (num_parents <= 0 || num_parents > USB_SOURCE_MAX)
 		return;
 
-	for (i = 0; i < num_parents; i++) {
-		parent_names[i] = of_clk_get_parent_name(np, i);
-		if (!parent_names[i])
-			return;
-	}
+	of_clk_parent_fill(np, parent_names, num_parents);
 
 	of_property_read_string(np, "clock-output-names", &name);
 

drivers/clk/at91/pmc.c

@@ -125,7 +125,6 @@ static int pmc_irq_map(struct irq_domain *h, unsigned int virq,
 
 	irq_set_chip_and_handler(virq, &pmc_irq,
 				 handle_level_irq);
-	set_irq_flags(virq, IRQF_VALID);
 	irq_set_chip_data(virq, pmc);
 
 	return 0;

drivers/clk/at91/pmc.h

@@ -59,71 +59,63 @@ static inline void pmc_write(struct at91_pmc *pmc, int offset, u32 value)
 int of_at91_get_clk_range(struct device_node *np, const char *propname,
 			  struct clk_range *range);
 
-extern void __init of_at91sam9260_clk_slow_setup(struct device_node *np,
-						 struct at91_pmc *pmc);
-
-extern void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np,
-						    struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np,
-						       struct at91_pmc *pmc);
-extern void __init of_at91rm9200_clk_main_setup(struct device_node *np,
-						struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_main_setup(struct device_node *np,
-						struct at91_pmc *pmc);
-
-extern void __init of_at91rm9200_clk_pll_setup(struct device_node *np,
-					       struct at91_pmc *pmc);
-extern void __init of_at91sam9g45_clk_pll_setup(struct device_node *np,
-						struct at91_pmc *pmc);
-extern void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np,
-						 struct at91_pmc *pmc);
-extern void __init of_sama5d3_clk_pll_setup(struct device_node *np,
-					    struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_plldiv_setup(struct device_node *np,
-						  struct at91_pmc *pmc);
-
-extern void __init of_at91rm9200_clk_master_setup(struct device_node *np,
-						  struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_master_setup(struct device_node *np,
-						  struct at91_pmc *pmc);
-
-extern void __init of_at91rm9200_clk_sys_setup(struct device_node *np,
-					       struct at91_pmc *pmc);
-
-extern void __init of_at91rm9200_clk_periph_setup(struct device_node *np,
-						  struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_periph_setup(struct device_node *np,
-						  struct at91_pmc *pmc);
-
-extern void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
-						struct at91_pmc *pmc);
-extern void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
-						 struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
-						struct at91_pmc *pmc);
-
-#if defined(CONFIG_HAVE_AT91_UTMI)
-extern void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np,
-						struct at91_pmc *pmc);
-#endif
-
-#if defined(CONFIG_HAVE_AT91_USB_CLK)
-extern void __init of_at91rm9200_clk_usb_setup(struct device_node *np,
-					       struct at91_pmc *pmc);
-extern void __init of_at91sam9x5_clk_usb_setup(struct device_node *np,
-					       struct at91_pmc *pmc);
-extern void __init of_at91sam9n12_clk_usb_setup(struct device_node *np,
-						struct at91_pmc *pmc);
-#endif
-
-#if defined(CONFIG_HAVE_AT91_SMD)
-extern void __init of_at91sam9x5_clk_smd_setup(struct device_node *np,
-					       struct at91_pmc *pmc);
-#endif
-
-#if defined(CONFIG_HAVE_AT91_H32MX)
-extern void __init of_sama5d4_clk_h32mx_setup(struct device_node *np,
-					      struct at91_pmc *pmc);
-#endif
+void of_at91sam9260_clk_slow_setup(struct device_node *np,
+				   struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_main_osc_setup(struct device_node *np,
+				      struct at91_pmc *pmc);
+void of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np,
+					 struct at91_pmc *pmc);
+void of_at91rm9200_clk_main_setup(struct device_node *np,
+				  struct at91_pmc *pmc);
+void of_at91sam9x5_clk_main_setup(struct device_node *np,
+				  struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_pll_setup(struct device_node *np,
+				 struct at91_pmc *pmc);
+void of_at91sam9g45_clk_pll_setup(struct device_node *np,
+				  struct at91_pmc *pmc);
+void of_at91sam9g20_clk_pllb_setup(struct device_node *np,
+				   struct at91_pmc *pmc);
+void of_sama5d3_clk_pll_setup(struct device_node *np,
+			      struct at91_pmc *pmc);
+void of_at91sam9x5_clk_plldiv_setup(struct device_node *np,
+				    struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_master_setup(struct device_node *np,
+				    struct at91_pmc *pmc);
+void of_at91sam9x5_clk_master_setup(struct device_node *np,
+				    struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_sys_setup(struct device_node *np,
+				 struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_periph_setup(struct device_node *np,
+				    struct at91_pmc *pmc);
+void of_at91sam9x5_clk_periph_setup(struct device_node *np,
+				    struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_prog_setup(struct device_node *np,
+				  struct at91_pmc *pmc);
+void of_at91sam9g45_clk_prog_setup(struct device_node *np,
+				   struct at91_pmc *pmc);
+void of_at91sam9x5_clk_prog_setup(struct device_node *np,
+				  struct at91_pmc *pmc);
+
+void of_at91sam9x5_clk_utmi_setup(struct device_node *np,
+				  struct at91_pmc *pmc);
+
+void of_at91rm9200_clk_usb_setup(struct device_node *np,
+				 struct at91_pmc *pmc);
+void of_at91sam9x5_clk_usb_setup(struct device_node *np,
+				 struct at91_pmc *pmc);
+void of_at91sam9n12_clk_usb_setup(struct device_node *np,
+				  struct at91_pmc *pmc);
+
+void of_at91sam9x5_clk_smd_setup(struct device_node *np,
+				 struct at91_pmc *pmc);
+
+void of_sama5d4_clk_h32mx_setup(struct device_node *np,
+				struct at91_pmc *pmc);
 
 #endif /* __PMC_H_ */

drivers/clk/bcm/clk-kona.c

@@ -16,6 +16,7 @@
 
 #include <linux/delay.h>
 #include <linux/kernel.h>
+#include <linux/clk.h>
 
 /*
  * "Policies" affect the frequencies of bus clocks provided by a
@@ -1010,25 +1011,23 @@ static long kona_peri_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 	struct bcm_clk_div *div = &bcm_clk->u.peri->div;
 
 	if (!divider_exists(div))
-		return __clk_get_rate(hw->clk);
+		return clk_hw_get_rate(hw);
 
 	/* Quietly avoid a zero rate */
 	return round_rate(bcm_clk->ccu, div, &bcm_clk->u.peri->pre_div,
 				rate ? rate : 1, *parent_rate, NULL);
 }
 
-static long kona_peri_clk_determine_rate(struct clk_hw *hw, unsigned long rate,
-		unsigned long min_rate,
-		unsigned long max_rate,
-		unsigned long *best_parent_rate, struct clk_hw **best_parent)
+static int kona_peri_clk_determine_rate(struct clk_hw *hw,
+					struct clk_rate_request *req)
 {
 	struct kona_clk *bcm_clk = to_kona_clk(hw);
-	struct clk *clk = hw->clk;
-	struct clk *current_parent;
+	struct clk_hw *current_parent;
 	unsigned long parent_rate;
 	unsigned long best_delta;
 	unsigned long best_rate;
 	u32 parent_count;
+	long rate;
 	u32 which;
 
 	/*
@@ -1037,18 +1036,25 @@ static long kona_peri_clk_determine_rate(struct clk_hw *hw, unsigned long rate,
 	 */
 	WARN_ON_ONCE(bcm_clk->init_data.flags & CLK_SET_RATE_NO_REPARENT);
 	parent_count = (u32)bcm_clk->init_data.num_parents;
-	if (parent_count < 2)
-		return kona_peri_clk_round_rate(hw, rate, best_parent_rate);
+	if (parent_count < 2) {
+		rate = kona_peri_clk_round_rate(hw, req->rate,
+						&req->best_parent_rate);
+		if (rate < 0)
+			return rate;
+
+		req->rate = rate;
+		return 0;
+	}
 
 	/* Unless we can do better, stick with current parent */
-	current_parent = clk_get_parent(clk);
-	parent_rate = __clk_get_rate(current_parent);
-	best_rate = kona_peri_clk_round_rate(hw, rate, &parent_rate);
-	best_delta = abs(best_rate - rate);
+	current_parent = clk_hw_get_parent(hw);
+	parent_rate = clk_hw_get_rate(current_parent);
+	best_rate = kona_peri_clk_round_rate(hw, req->rate, &parent_rate);
+	best_delta = abs(best_rate - req->rate);
 
 	/* Check whether any other parent clock can produce a better result */
 	for (which = 0; which < parent_count; which++) {
-		struct clk *parent = clk_get_parent_by_index(clk, which);
+		struct clk_hw *parent = clk_hw_get_parent_by_index(hw, which);
 		unsigned long delta;
 		unsigned long other_rate;
 
@@ -1057,18 +1063,20 @@ static long kona_peri_clk_determine_rate(struct clk_hw *hw, unsigned long rate,
 			continue;
 
 		/* We don't support CLK_SET_RATE_PARENT */
-		parent_rate = __clk_get_rate(parent);
-		other_rate = kona_peri_clk_round_rate(hw, rate, &parent_rate);
-		delta = abs(other_rate - rate);
+		parent_rate = clk_hw_get_rate(parent);
+		other_rate = kona_peri_clk_round_rate(hw, req->rate,
+						      &parent_rate);
+		delta = abs(other_rate - req->rate);
 		if (delta < best_delta) {
 			best_delta = delta;
 			best_rate = other_rate;
-			*best_parent = __clk_get_hw(parent);
-			*best_parent_rate = parent_rate;
+			req->best_parent_hw = parent;
+			req->best_parent_rate = parent_rate;
 		}
 	}
 
-	return best_rate;
+	req->rate = best_rate;
+	return 0;
 }
 
 static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index)
@@ -1130,7 +1138,7 @@ static int kona_peri_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (parent_rate > (unsigned long)LONG_MAX)
 		return -EINVAL;
 
-	if (rate == __clk_get_rate(hw->clk))
+	if (rate == clk_hw_get_rate(hw))
 		return 0;
 
 	if (!divider_exists(div))
@@ -1249,6 +1257,7 @@ bool __init kona_ccu_init(struct ccu_data *ccu)
 	unsigned long flags;
 	unsigned int which;
 	struct clk **clks = ccu->clk_data.clks;
+	struct kona_clk *kona_clks = ccu->kona_clks;
 	bool success = true;
 
 	flags = ccu_lock(ccu);
@@ -1259,7 +1268,7 @@ bool __init kona_ccu_init(struct ccu_data *ccu)
 
 		if (!clks[which])
 			continue;
-		bcm_clk = to_kona_clk(__clk_get_hw(clks[which]));
+		bcm_clk = &kona_clks[which];
 		success &= __kona_clk_init(bcm_clk);
 	}
 

drivers/clk/berlin/berlin2-pll.c

@@ -61,7 +61,7 @@ berlin2_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	fbdiv = (val >> map->fbdiv_shift) & FBDIV_MASK;
 	rfdiv = (val >> map->rfdiv_shift) & RFDIV_MASK;
 	if (rfdiv == 0) {
-		pr_warn("%s has zero rfdiv\n", __clk_get_name(hw->clk));
+		pr_warn("%s has zero rfdiv\n", clk_hw_get_name(hw));
 		rfdiv = 1;
 	}
 
@@ -70,7 +70,7 @@ berlin2_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	vcodiv = map->vcodiv[vcodivsel];
 	if (vcodiv == 0) {
 		pr_warn("%s has zero vcodiv (index %d)\n",
-			__clk_get_name(hw->clk), vcodivsel);
+			clk_hw_get_name(hw), vcodivsel);
 		vcodiv = 1;
 	}
 

drivers/clk/clk-axi-clkgen.c

@@ -10,7 +10,6 @@
 
 #include <linux/platform_device.h>
 #include <linux/clk-provider.h>
-#include <linux/clk.h>
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/of.h>

drivers/clk/clk-bcm2835.c

@@ -32,11 +32,6 @@ void __init bcm2835_init_clocks(void)
 	struct clk *clk;
 	int ret;
 
-	clk = clk_register_fixed_rate(NULL, "sys_pclk", NULL, CLK_IS_ROOT,
-					250000000);
-	if (IS_ERR(clk))
-		pr_err("sys_pclk not registered\n");
-
 	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
 					126000000);
 	if (IS_ERR(clk))

drivers/clk/clk-cdce706.c

@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
@@ -309,7 +310,7 @@ static long cdce706_divider_round_rate(struct clk_hw *hw, unsigned long rate,
 	if (!mul)
 		div = CDCE706_DIVIDER_DIVIDER_MAX;
 
-	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+	if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
 		unsigned long best_diff = rate;
 		unsigned long best_div = 0;
 		struct clk *gp_clk = cdce->clkin_clk[cdce->clkin[0].parent];

drivers/clk/clk-cdce925.c

@@ -10,6 +10,7 @@
  * Copyright (C) 2014, Topic Embedded Products
  * Licenced under GPL
  */
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/module.h>

drivers/clk/clk-clps711x.c

@@ -9,7 +9,6 @@
  * (at your option) any later version.
  */
 
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/io.h>

drivers/clk/clk-composite.c

@@ -55,78 +55,77 @@ static unsigned long clk_composite_recalc_rate(struct clk_hw *hw,
 	return rate_ops->recalc_rate(rate_hw, parent_rate);
 }
 
-static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate,
-					unsigned long min_rate,
-					unsigned long max_rate,
-					unsigned long *best_parent_rate,
-					struct clk_hw **best_parent_p)
+static int clk_composite_determine_rate(struct clk_hw *hw,
+					struct clk_rate_request *req)
 {
 	struct clk_composite *composite = to_clk_composite(hw);
 	const struct clk_ops *rate_ops = composite->rate_ops;
 	const struct clk_ops *mux_ops = composite->mux_ops;
 	struct clk_hw *rate_hw = composite->rate_hw;
 	struct clk_hw *mux_hw = composite->mux_hw;
-	struct clk *parent;
+	struct clk_hw *parent;
 	unsigned long parent_rate;
 	long tmp_rate, best_rate = 0;
 	unsigned long rate_diff;
 	unsigned long best_rate_diff = ULONG_MAX;
+	long rate;
 	int i;
 
 	if (rate_hw && rate_ops && rate_ops->determine_rate) {
 		__clk_hw_set_clk(rate_hw, hw);
-		return rate_ops->determine_rate(rate_hw, rate, min_rate,
-						max_rate,
-						best_parent_rate,
-						best_parent_p);
+		return rate_ops->determine_rate(rate_hw, req);
 	} else if (rate_hw && rate_ops && rate_ops->round_rate &&
 		   mux_hw && mux_ops && mux_ops->set_parent) {
-		*best_parent_p = NULL;
+		req->best_parent_hw = NULL;
 
-		if (__clk_get_flags(hw->clk) & CLK_SET_RATE_NO_REPARENT) {
-			parent = clk_get_parent(mux_hw->clk);
-			*best_parent_p = __clk_get_hw(parent);
-			*best_parent_rate = __clk_get_rate(parent);
+		if (clk_hw_get_flags(hw) & CLK_SET_RATE_NO_REPARENT) {
+			parent = clk_hw_get_parent(mux_hw);
+			req->best_parent_hw = parent;
+			req->best_parent_rate = clk_hw_get_rate(parent);
 
-			return rate_ops->round_rate(rate_hw, rate,
-						    best_parent_rate);
+			rate = rate_ops->round_rate(rate_hw, req->rate,
+						    &req->best_parent_rate);
+			if (rate < 0)
+				return rate;
+
+			req->rate = rate;
+			return 0;
 		}
 
-		for (i = 0; i < __clk_get_num_parents(mux_hw->clk); i++) {
-			parent = clk_get_parent_by_index(mux_hw->clk, i);
+		for (i = 0; i < clk_hw_get_num_parents(mux_hw); i++) {
+			parent = clk_hw_get_parent_by_index(mux_hw, i);
 			if (!parent)
 				continue;
 
-			parent_rate = __clk_get_rate(parent);
+			parent_rate = clk_hw_get_rate(parent);
 
-			tmp_rate = rate_ops->round_rate(rate_hw, rate,
+			tmp_rate = rate_ops->round_rate(rate_hw, req->rate,
 							&parent_rate);
 			if (tmp_rate < 0)
 				continue;
 
-			rate_diff = abs(rate - tmp_rate);
+			rate_diff = abs(req->rate - tmp_rate);
 
-			if (!rate_diff || !*best_parent_p
+			if (!rate_diff || !req->best_parent_hw
 				       || best_rate_diff > rate_diff) {
-				*best_parent_p = __clk_get_hw(parent);
-				*best_parent_rate = parent_rate;
+				req->best_parent_hw = parent;
+				req->best_parent_rate = parent_rate;
 				best_rate_diff = rate_diff;
 				best_rate = tmp_rate;
 			}
 
 			if (!rate_diff)
-				return rate;
+				return 0;
 		}
 
-		return best_rate;
+		req->rate = best_rate;
+		return 0;
 	} else if (mux_hw && mux_ops && mux_ops->determine_rate) {
 		__clk_hw_set_clk(mux_hw, hw);
-		return mux_ops->determine_rate(mux_hw, rate, min_rate,
-					       max_rate, best_parent_rate,
-					       best_parent_p);
+		return mux_ops->determine_rate(mux_hw, req);
 	} else {
 		pr_err("clk: clk_composite_determine_rate function called, but no mux or rate callback set!\n");
-		return 0;
+		return -EINVAL;
 	}
 }
 

drivers/clk/clk-divider.c

@@ -78,12 +78,14 @@ static unsigned int _get_table_div(const struct clk_div_table *table,
 }
 
 static unsigned int _get_div(const struct clk_div_table *table,
-			     unsigned int val, unsigned long flags)
+			     unsigned int val, unsigned long flags, u8 width)
 {
 	if (flags & CLK_DIVIDER_ONE_BASED)
 		return val;
 	if (flags & CLK_DIVIDER_POWER_OF_TWO)
 		return 1 << val;
+	if (flags & CLK_DIVIDER_MAX_AT_ZERO)
+		return val ? val : div_mask(width) + 1;
 	if (table)
 		return _get_table_div(table, val);
 	return val + 1;
@@ -101,12 +103,14 @@ static unsigned int _get_table_val(const struct clk_div_table *table,
 }
 
 static unsigned int _get_val(const struct clk_div_table *table,
-			     unsigned int div, unsigned long flags)
+			     unsigned int div, unsigned long flags, u8 width)
 {
 	if (flags & CLK_DIVIDER_ONE_BASED)
 		return div;
 	if (flags & CLK_DIVIDER_POWER_OF_TWO)
 		return __ffs(div);
+	if (flags & CLK_DIVIDER_MAX_AT_ZERO)
+		return (div == div_mask(width) + 1) ? 0 : div;
 	if (table)
 		return  _get_table_val(table, div);
 	return div - 1;
@@ -117,13 +121,14 @@ unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate,
 				  const struct clk_div_table *table,
 				  unsigned long flags)
 {
+	struct clk_divider *divider = to_clk_divider(hw);
 	unsigned int div;
 
-	div = _get_div(table, val, flags);
+	div = _get_div(table, val, flags, divider->width);
 	if (!div) {
 		WARN(!(flags & CLK_DIVIDER_ALLOW_ZERO),
 			"%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
-			__clk_get_name(hw->clk));
+			clk_hw_get_name(hw));
 		return parent_rate;
 	}
 
@@ -285,7 +290,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 
 	maxdiv = _get_maxdiv(table, width, flags);
 
-	if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
+	if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
 		parent_rate = *best_parent_rate;
 		bestdiv = _div_round(table, parent_rate, rate, flags);
 		bestdiv = bestdiv == 0 ? 1 : bestdiv;
@@ -311,7 +316,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 			*best_parent_rate = parent_rate_saved;
 			return i;
 		}
-		parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
+		parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
 					       rate * i);
 		now = DIV_ROUND_UP(parent_rate, i);
 		if (_is_best_div(rate, now, best, flags)) {
@@ -323,7 +328,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 
 	if (!bestdiv) {
 		bestdiv = _get_maxdiv(table, width, flags);
-		*best_parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), 1);
+		*best_parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), 1);
 	}
 
 	return bestdiv;
@@ -351,7 +356,8 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
 	if (divider->flags & CLK_DIVIDER_READ_ONLY) {
 		bestdiv = readl(divider->reg) >> divider->shift;
 		bestdiv &= div_mask(divider->width);
-		bestdiv = _get_div(divider->table, bestdiv, divider->flags);
+		bestdiv = _get_div(divider->table, bestdiv, divider->flags,
+			divider->width);
 		return DIV_ROUND_UP(*prate, bestdiv);
 	}
 
@@ -370,7 +376,7 @@ int divider_get_val(unsigned long rate, unsigned long parent_rate,
 	if (!_is_valid_div(table, div, flags))
 		return -EINVAL;
 
-	value = _get_val(table, div, flags);
+	value = _get_val(table, div, flags, width);
 
 	return min_t(unsigned int, value, div_mask(width));
 }
@@ -389,6 +395,8 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	if (divider->lock)
 		spin_lock_irqsave(divider->lock, flags);
+	else
+		__acquire(divider->lock);
 
 	if (divider->flags & CLK_DIVIDER_HIWORD_MASK) {
 		val = div_mask(divider->width) << (divider->shift + 16);
@@ -401,6 +409,8 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	if (divider->lock)
 		spin_unlock_irqrestore(divider->lock, flags);
+	else
+		__release(divider->lock);
 
 	return 0;
 }

drivers/clk/clk-efm32gg.c

@@ -6,7 +6,6 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/clk-provider.h>
 #include <linux/of.h>

drivers/clk/clk-fixed-factor.c

@@ -41,12 +41,11 @@ static long clk_factor_round_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
 
-	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+	if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
 		unsigned long best_parent;
 
 		best_parent = (rate / fix->mult) * fix->div;
-		*prate = __clk_round_rate(__clk_get_parent(hw->clk),
-				best_parent);
+		*prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
 	}
 
 	return (*prate / fix->div) * fix->mult;

drivers/clk/clk-fractional-divider.c

@@ -27,11 +27,15 @@ static unsigned long clk_fd_recalc_rate(struct clk_hw *hw,
 
 	if (fd->lock)
 		spin_lock_irqsave(fd->lock, flags);
+	else
+		__acquire(fd->lock);
 
 	val = clk_readl(fd->reg);
 
 	if (fd->lock)
 		spin_unlock_irqrestore(fd->lock, flags);
+	else
+		__release(fd->lock);
 
 	m = (val & fd->mmask) >> fd->mshift;
 	n = (val & fd->nmask) >> fd->nshift;
@@ -80,6 +84,8 @@ static int clk_fd_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	if (fd->lock)
 		spin_lock_irqsave(fd->lock, flags);
+	else
+		__acquire(fd->lock);
 
 	val = clk_readl(fd->reg);
 	val &= ~(fd->mmask | fd->nmask);
@@ -88,6 +94,8 @@ static int clk_fd_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	if (fd->lock)
 		spin_unlock_irqrestore(fd->lock, flags);
+	else
+		__release(fd->lock);
 
 	return 0;
 }

drivers/clk/clk-gate.c

@@ -52,6 +52,8 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
 
 	if (gate->lock)
 		spin_lock_irqsave(gate->lock, flags);
+	else
+		__acquire(gate->lock);
 
 	if (gate->flags & CLK_GATE_HIWORD_MASK) {
 		reg = BIT(gate->bit_idx + 16);
@@ -70,6 +72,8 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
 
 	if (gate->lock)
 		spin_unlock_irqrestore(gate->lock, flags);
+	else
+		__release(gate->lock);
 }
 
 static int clk_gate_enable(struct clk_hw *hw)

drivers/clk/clk-highbank.c

@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/of.h>

drivers/clk/clk-moxart.c

@@ -10,6 +10,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/of_address.h>

drivers/clk/clk-mux.c

@@ -10,7 +10,6 @@
  * Simple multiplexer clock implementation
  */
 
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -32,7 +31,7 @@
 static u8 clk_mux_get_parent(struct clk_hw *hw)
 {
 	struct clk_mux *mux = to_clk_mux(hw);
-	int num_parents = __clk_get_num_parents(hw->clk);
+	int num_parents = clk_hw_get_num_parents(hw);
 	u32 val;
 
 	/*
@@ -85,6 +84,8 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 
 	if (mux->lock)
 		spin_lock_irqsave(mux->lock, flags);
+	else
+		__acquire(mux->lock);
 
 	if (mux->flags & CLK_MUX_HIWORD_MASK) {
 		val = mux->mask << (mux->shift + 16);
@@ -97,6 +98,8 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 
 	if (mux->lock)
 		spin_unlock_irqrestore(mux->lock, flags);
+	else
+		__release(mux->lock);
 
 	return 0;
 }

drivers/clk/clk-nomadik.c

@@ -8,8 +8,7 @@
 #define pr_fmt(fmt) "Nomadik SRC clocks: " fmt
 
 #include <linux/bitops.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/clk-provider.h>

drivers/clk/clk-palmas.c

@@ -18,7 +18,6 @@
  */
 
 #include <linux/clk.h>
-#include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/mfd/palmas.h>
 #include <linux/module.h>

drivers/clk/clk-rk808.c

@@ -15,7 +15,6 @@
  * more details.
  */
 
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/module.h>
 #include <linux/slab.h>

drivers/clk/clk-s2mps11.c

@@ -58,21 +58,17 @@ static struct s2mps11_clk *to_s2mps11_clk(struct clk_hw *hw)
 static int s2mps11_clk_prepare(struct clk_hw *hw)
 {
 	struct s2mps11_clk *s2mps11 = to_s2mps11_clk(hw);
-	int ret;
 
-	ret = regmap_update_bits(s2mps11->iodev->regmap_pmic,
+	return regmap_update_bits(s2mps11->iodev->regmap_pmic,
 				 s2mps11->reg,
 				 s2mps11->mask, s2mps11->mask);
-
-	return ret;
 }
 
 static void s2mps11_clk_unprepare(struct clk_hw *hw)
 {
 	struct s2mps11_clk *s2mps11 = to_s2mps11_clk(hw);
-	int ret;
 
-	ret = regmap_update_bits(s2mps11->iodev->regmap_pmic, s2mps11->reg,
+	regmap_update_bits(s2mps11->iodev->regmap_pmic, s2mps11->reg,
 			   s2mps11->mask, ~s2mps11->mask);
 }
 
@@ -186,15 +182,15 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 	struct clk_init_data *clks_init;
 	int i, ret = 0;
 
-	s2mps11_clks = devm_kzalloc(&pdev->dev, sizeof(*s2mps11_clk) *
-					S2MPS11_CLKS_NUM, GFP_KERNEL);
+	s2mps11_clks = devm_kcalloc(&pdev->dev, S2MPS11_CLKS_NUM,
+				sizeof(*s2mps11_clk), GFP_KERNEL);
 	if (!s2mps11_clks)
 		return -ENOMEM;
 
 	s2mps11_clk = s2mps11_clks;
 
-	clk_table = devm_kzalloc(&pdev->dev, sizeof(struct clk *) *
-				 S2MPS11_CLKS_NUM, GFP_KERNEL);
+	clk_table = devm_kcalloc(&pdev->dev, S2MPS11_CLKS_NUM,
+				sizeof(struct clk *), GFP_KERNEL);
 	if (!clk_table)
 		return -ENOMEM;
 
@@ -246,7 +242,7 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 					s2mps11_name(s2mps11_clk), NULL);
 		if (!s2mps11_clk->lookup) {
 			ret = -ENOMEM;
-			goto err_lup;
+			goto err_reg;
 		}
 	}
 
@@ -265,16 +261,10 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, s2mps11_clks);
 
 	return ret;
-err_lup:
-	devm_clk_unregister(&pdev->dev, s2mps11_clk->clk);
+
 err_reg:
-	while (s2mps11_clk > s2mps11_clks) {
-		if (s2mps11_clk->lookup) {
-			clkdev_drop(s2mps11_clk->lookup);
-			devm_clk_unregister(&pdev->dev, s2mps11_clk->clk);
-		}
-		s2mps11_clk--;
-	}
+	while (--i >= 0)
+		clkdev_drop(s2mps11_clks[i].lookup);
 
 	return ret;
 }
@@ -322,7 +312,7 @@ static int __init s2mps11_clk_init(void)
 }
 subsys_initcall(s2mps11_clk_init);
 
-static void __init s2mps11_clk_cleanup(void)
+static void __exit s2mps11_clk_cleanup(void)
 {
 	platform_driver_unregister(&s2mps11_clk_driver);
 }

drivers/clk/clk-si5351.c

@@ -18,7 +18,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/clkdev.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/err.h>
@@ -439,7 +439,7 @@ static unsigned long si5351_pll_recalc_rate(struct clk_hw *hw,
 
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n",
-		__func__, __clk_get_name(hwdata->hw.clk),
+		__func__, clk_hw_get_name(hw),
 		hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
 		parent_rate, (unsigned long)rate);
 
@@ -497,7 +497,7 @@ static long si5351_pll_round_rate(struct clk_hw *hw, unsigned long rate,
 
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: a = %lu, b = %lu, c = %lu, parent_rate = %lu, rate = %lu\n",
-		__func__, __clk_get_name(hwdata->hw.clk), a, b, c,
+		__func__, clk_hw_get_name(hw), a, b, c,
 		*parent_rate, rate);
 
 	return rate;
@@ -521,7 +521,7 @@ static int si5351_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n",
-		__func__, __clk_get_name(hwdata->hw.clk),
+		__func__, clk_hw_get_name(hw),
 		hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
 		parent_rate, rate);
 
@@ -632,7 +632,7 @@ static unsigned long si5351_msynth_recalc_rate(struct clk_hw *hw,
 
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, m = %lu, parent_rate = %lu, rate = %lu\n",
-		__func__, __clk_get_name(hwdata->hw.clk),
+		__func__, clk_hw_get_name(hw),
 		hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
 		m, parent_rate, (unsigned long)rate);
 
@@ -663,7 +663,7 @@ static long si5351_msynth_round_rate(struct clk_hw *hw, unsigned long rate,
 		divby4 = 1;
 
 	/* multisync can set pll */
-	if (__clk_get_flags(hwdata->hw.clk) & CLK_SET_RATE_PARENT) {
+	if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
 		/*
 		 * find largest integer divider for max
 		 * vco frequency and given target rate
@@ -745,7 +745,7 @@ static long si5351_msynth_round_rate(struct clk_hw *hw, unsigned long rate,
 
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: a = %lu, b = %lu, c = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n",
-		__func__, __clk_get_name(hwdata->hw.clk), a, b, c, divby4,
+		__func__, clk_hw_get_name(hw), a, b, c, divby4,
 		*parent_rate, rate);
 
 	return rate;
@@ -777,7 +777,7 @@ static int si5351_msynth_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n",
-		__func__, __clk_get_name(hwdata->hw.clk),
+		__func__, clk_hw_get_name(hw),
 		hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
 		divby4, parent_rate, rate);
 
@@ -1013,7 +1013,7 @@ static long si5351_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
 		rate = SI5351_CLKOUT_MIN_FREQ;
 
 	/* request frequency if multisync master */
-	if (__clk_get_flags(hwdata->hw.clk) & CLK_SET_RATE_PARENT) {
+	if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
 		/* use r divider for frequencies below 1MHz */
 		rdiv = SI5351_OUTPUT_CLK_DIV_1;
 		while (rate < SI5351_MULTISYNTH_MIN_FREQ &&
@@ -1042,7 +1042,7 @@ static long si5351_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
 
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
-		__func__, __clk_get_name(hwdata->hw.clk), (1 << rdiv),
+		__func__, clk_hw_get_name(hw), (1 << rdiv),
 		*parent_rate, rate);
 
 	return rate;
@@ -1093,7 +1093,7 @@ static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
-		__func__, __clk_get_name(hwdata->hw.clk), (1 << rdiv),
+		__func__, clk_hw_get_name(hw), (1 << rdiv),
 		parent_rate, rate);
 
 	return 0;

drivers/clk/clk-si570.c

@@ -19,6 +19,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/module.h>

drivers/clk/clk-stm32f4.c

@@ -175,11 +175,10 @@ static long clk_apb_mul_round_rate(struct clk_hw *hw, unsigned long rate,
 	if (readl(base + STM32F4_RCC_CFGR) & BIT(am->bit_idx))
 		mult = 2;
 
-	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+	if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
 		unsigned long best_parent = rate / mult;
 
-		*prate =
-		    __clk_round_rate(__clk_get_parent(hw->clk), best_parent);
+		*prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
 	}
 
 	return *prate * mult;

drivers/clk/clk-twl6040.c

@@ -20,7 +20,6 @@
 *
 */
 
-#include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
@@ -91,7 +90,7 @@ static int twl6040_clk_probe(struct platform_device *pdev)
 	clkdata->twl6040 = twl6040;
 
 	clkdata->mcpdm_fclk.init = &wm831x_clkout_init;
-	clkdata->clk = clk_register(&pdev->dev, &clkdata->mcpdm_fclk);
+	clkdata->clk = devm_clk_register(&pdev->dev, &clkdata->mcpdm_fclk);
 	if (IS_ERR(clkdata->clk))
 		return PTR_ERR(clkdata->clk);
 
@@ -100,21 +99,11 @@ static int twl6040_clk_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int twl6040_clk_remove(struct platform_device *pdev)
-{
-	struct twl6040_clk *clkdata = platform_get_drvdata(pdev);
-
-	clk_unregister(clkdata->clk);
-
-	return 0;
-}
-
 static struct platform_driver twl6040_clk_driver = {
 	.driver = {
 		.name = "twl6040-clk",
 	},
 	.probe = twl6040_clk_probe,
-	.remove = twl6040_clk_remove,
 };
 
 module_platform_driver(twl6040_clk_driver);

drivers/clk/clk-u300.c

@@ -5,8 +5,8 @@
  * Author: Linus Walleij <linus.walleij@stericsson.com>
  * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
  */
-#include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/clk-provider.h>

drivers/clk/clk-wm831x.c

@@ -12,7 +12,6 @@
  *
  */
 
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/module.h>

drivers/clk/clk-xgene.c

@@ -60,7 +60,6 @@ enum xgene_pll_type {
 
 struct xgene_clk_pll {
 	struct clk_hw	hw;
-	const char	*name;
 	void __iomem	*reg;
 	spinlock_t	*lock;
 	u32		pll_offset;
@@ -75,7 +74,7 @@ static int xgene_clk_pll_is_enabled(struct clk_hw *hw)
 	u32 data;
 
 	data = xgene_clk_read(pllclk->reg + pllclk->pll_offset);
-	pr_debug("%s pll %s\n", pllclk->name,
+	pr_debug("%s pll %s\n", clk_hw_get_name(hw),
 		data & REGSPEC_RESET_F1_MASK ? "disabled" : "enabled");
 
 	return data & REGSPEC_RESET_F1_MASK ? 0 : 1;
@@ -113,7 +112,7 @@ static unsigned long xgene_clk_pll_recalc_rate(struct clk_hw *hw,
 		fref = parent_rate / nref;
 		fvco = fref * nfb;
 	}
-	pr_debug("%s pll recalc rate %ld parent %ld\n", pllclk->name,
+	pr_debug("%s pll recalc rate %ld parent %ld\n", clk_hw_get_name(hw),
 		fvco / nout, parent_rate);
 
 	return fvco / nout;
@@ -146,7 +145,6 @@ static struct clk *xgene_register_clk_pll(struct device *dev,
 	init.parent_names = parent_name ? &parent_name : NULL;
 	init.num_parents = parent_name ? 1 : 0;
 
-	apmclk->name = name;
 	apmclk->reg = reg;
 	apmclk->lock = lock;
 	apmclk->pll_offset = pll_offset;
@@ -210,7 +208,6 @@ struct xgene_dev_parameters {
 
 struct xgene_clk {
 	struct clk_hw	hw;
-	const char	*name;
 	spinlock_t	*lock;
 	struct xgene_dev_parameters	param;
 };
@@ -228,7 +225,7 @@ static int xgene_clk_enable(struct clk_hw *hw)
 		spin_lock_irqsave(pclk->lock, flags);
 
 	if (pclk->param.csr_reg != NULL) {
-		pr_debug("%s clock enabled\n", pclk->name);
+		pr_debug("%s clock enabled\n", clk_hw_get_name(hw));
 		reg = __pa(pclk->param.csr_reg);
 		/* First enable the clock */
 		data = xgene_clk_read(pclk->param.csr_reg +
@@ -237,7 +234,7 @@ static int xgene_clk_enable(struct clk_hw *hw)
 		xgene_clk_write(data, pclk->param.csr_reg +
 					pclk->param.reg_clk_offset);
 		pr_debug("%s clock PADDR base %pa clk offset 0x%08X mask 0x%08X value 0x%08X\n",
-			pclk->name, &reg,
+			clk_hw_get_name(hw), &reg,
 			pclk->param.reg_clk_offset, pclk->param.reg_clk_mask,
 			data);
 
@@ -248,7 +245,7 @@ static int xgene_clk_enable(struct clk_hw *hw)
 		xgene_clk_write(data, pclk->param.csr_reg +
 					pclk->param.reg_csr_offset);
 		pr_debug("%s CSR RESET PADDR base %pa csr offset 0x%08X mask 0x%08X value 0x%08X\n",
-			pclk->name, &reg,
+			clk_hw_get_name(hw), &reg,
 			pclk->param.reg_csr_offset, pclk->param.reg_csr_mask,
 			data);
 	}
@@ -269,7 +266,7 @@ static void xgene_clk_disable(struct clk_hw *hw)
 		spin_lock_irqsave(pclk->lock, flags);
 
 	if (pclk->param.csr_reg != NULL) {
-		pr_debug("%s clock disabled\n", pclk->name);
+		pr_debug("%s clock disabled\n", clk_hw_get_name(hw));
 		/* First put the CSR in reset */
 		data = xgene_clk_read(pclk->param.csr_reg +
 					pclk->param.reg_csr_offset);
@@ -295,10 +292,10 @@ static int xgene_clk_is_enabled(struct clk_hw *hw)
 	u32 data = 0;
 
 	if (pclk->param.csr_reg != NULL) {
-		pr_debug("%s clock checking\n", pclk->name);
+		pr_debug("%s clock checking\n", clk_hw_get_name(hw));
 		data = xgene_clk_read(pclk->param.csr_reg +
 					pclk->param.reg_clk_offset);
-		pr_debug("%s clock is %s\n", pclk->name,
+		pr_debug("%s clock is %s\n", clk_hw_get_name(hw),
 			data & pclk->param.reg_clk_mask ? "enabled" :
 							"disabled");
 	}
@@ -321,11 +318,13 @@ static unsigned long xgene_clk_recalc_rate(struct clk_hw *hw,
 		data &= (1 << pclk->param.reg_divider_width) - 1;
 
 		pr_debug("%s clock recalc rate %ld parent %ld\n",
-			pclk->name, parent_rate / data, parent_rate);
+			clk_hw_get_name(hw),
+			parent_rate / data, parent_rate);
+
 		return parent_rate / data;
 	} else {
 		pr_debug("%s clock recalc rate %ld parent %ld\n",
-			pclk->name, parent_rate, parent_rate);
+			clk_hw_get_name(hw), parent_rate, parent_rate);
 		return parent_rate;
 	}
 }
@@ -357,7 +356,7 @@ static int xgene_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 		data |= divider;
 		xgene_clk_write(data, pclk->param.divider_reg +
 					pclk->param.reg_divider_offset);
-		pr_debug("%s clock set rate %ld\n", pclk->name,
+		pr_debug("%s clock set rate %ld\n", clk_hw_get_name(hw),
 			parent_rate / divider_save);
 	} else {
 		divider_save = 1;
@@ -419,7 +418,6 @@ static struct clk *xgene_register_clk(struct device *dev,
 	init.parent_names = parent_name ? &parent_name : NULL;
 	init.num_parents = parent_name ? 1 : 0;
 
-	apmclk->name = name;
 	apmclk->lock = lock;
 	apmclk->hw.init = &init;
 	apmclk->param = *parameters;

drivers/clk/h8300/clk-div.c

@@ -4,8 +4,6 @@
  * Copyright 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
  */
 
-#include <linux/clk.h>
-#include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/of.h>
@@ -15,7 +13,7 @@ static DEFINE_SPINLOCK(clklock);
 
 static void __init h8300_div_clk_setup(struct device_node *node)
 {
-	unsigned int num_parents;
+	int num_parents;
 	struct clk *clk;
 	const char *clk_name = node->name;
 	const char *parent_name;

drivers/clk/hisilicon/Kconfig

 config COMMON_CLK_HI6220
 	bool "Hi6220 Clock Driver"
-	depends on ARCH_HISI || COMPILE_TEST
+	depends on (ARCH_HISI || COMPILE_TEST) && MAILBOX
 	default ARCH_HISI
 	help
 	  Build the Hisilicon Hi6220 clock driver based on the common clock framework.

drivers/clk/hisilicon/Makefile

@@ -7,4 +7,4 @@ obj-y	+= clk.o clkgate-separated.o clkdivider-hi6220.o
 obj-$(CONFIG_ARCH_HI3xxx)	+= clk-hi3620.o
 obj-$(CONFIG_ARCH_HIP04)	+= clk-hip04.o
 obj-$(CONFIG_ARCH_HIX5HD2)	+= clk-hix5hd2.o
-obj-$(CONFIG_COMMON_CLK_HI6220)	+= clk-hi6220.o
+obj-$(CONFIG_COMMON_CLK_HI6220)	+= clk-hi6220.o clk-hi6220-stub.o