Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM driver updates from Arnd Bergmann:
 "The drivers branch for 6.1 is a bit larger than for most releases.

  Most of the changes come from SoC maintainers for the drivers/soc
  subsystem:

   - A new driver for error handling on the NVIDIA Tegra 'control
     backbone' bus.

   - A new driver for Qualcomm LLCC/DDR bandwidth measurement

   - New Rockchip rv1126 and rk3588 power domain drivers

   - DT binding updates for memory controllers, older Rockchip SoCs,
     various Mediatek devices, Qualcomm SCM firmware

   - Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
     Apple rtkit firmware driver, Tegra firmware

   - Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
     Qualcomm, Broadcom, NXP, ...)

  There are also some separate subsystem with downstream maintainers
  that merge updates this way:

   - Various updates and new drivers in the memory controller subsystem
     for Mediatek and Broadcom SoCs

   - Small set of changes in preparation to add support for FF-A v1.1
     specification later, in the Arm FF-A firmware subsystem

   - debugfs support in the PSCI firmware subsystem"

* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
  ARM: remove check for CONFIG_DEBUG_LL_SER3
  firmware/psci: Add debugfs support to ease debugging
  firmware/psci: Print a warning if PSCI doesn't accept PC mode
  dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
  dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
  dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
  dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
  soc: sunxi: sram: Add support for the D1 system control
  soc: sunxi: sram: Export the LDO control register
  soc: sunxi: sram: Save a pointer to the OF match data
  soc: sunxi: sram: Return void from the release function
  soc: apple: rtkit: Add apple_rtkit_poll
  soc: imx: add i.MX93 media blk ctrl driver
  soc: imx: add i.MX93 SRC power domain driver
  soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
  soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
  soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
  soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
  soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
  soc: imx: add icc paths for i.MX8MP media blk ctrl
  ...

Documentation/ABI/testing/sysfs-platform-brcmstb-memc

+What:		/sys/bus/platform/devices/*/srpd
+Date:		July 2022
+KernelVersion:	5.21
+Contact:	Florian Fainelli <f.fainelli@gmail.com>
+Description:
+		Self Refresh Power Down (SRPD) inactivity timeout counted in
+		internal DDR controller clock cycles. Possible values range
+		from 0 (disable inactivity timeout) to 65535 (0xffff).
+
+What:		/sys/bus/platform/devices/*/frequency
+Date:		July 2022
+KernelVersion:	5.21
+Contact:	Florian Fainelli <f.fainelli@gmail.com>
+Description:
+		DDR PHY frequency in Hz.

Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt

@@ -187,15 +187,8 @@ Required properties:
 Sequencer DRAM parameters and control registers. Used for Self-Refresh
 Power-Down (SRPD), among other things.
 
-Required properties:
-- compatible     : should contain one of these
-	"brcm,brcmstb-memc-ddr-rev-b.2.1"
-	"brcm,brcmstb-memc-ddr-rev-b.2.2"
-	"brcm,brcmstb-memc-ddr-rev-b.2.3"
-	"brcm,brcmstb-memc-ddr-rev-b.3.0"
-	"brcm,brcmstb-memc-ddr-rev-b.3.1"
-	"brcm,brcmstb-memc-ddr"
-- reg            : the MEMC DDR register range
+See Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml for a
+full list of supported compatible strings and properties.
 
 Example:
 

Documentation/devicetree/bindings/arm/fsl.yaml

@@ -554,8 +554,7 @@ properties:
               - engicam,imx6ul-isiot      # Engicam Is.IoT MX6UL eMMC/NAND Starter kit
               - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
               - karo,imx6ul-tx6ul         # Ka-Ro electronics TXUL-0010 Module
-              - kontron,imx6ul-n6310-som  # Kontron N6310 SOM
-              - kontron,imx6ul-n6311-som  # Kontron N6311 SOM
+              - kontron,sl-imx6ul         # Kontron SL i.MX6UL SoM
               - prt,prti6g                # Protonic PRTI6G Board
               - technexion,imx6ul-pico-dwarf   # TechNexion i.MX6UL Pico-Dwarf
               - technexion,imx6ul-pico-hobbit  # TechNexion i.MX6UL Pico-Hobbit
@@ -591,23 +590,17 @@ properties:
           - const: phytec,imx6ul-pcl063   # PHYTEC phyCORE-i.MX 6UL
           - const: fsl,imx6ul
 
-      - description: Kontron N6310 S Board
+      - description: Kontron BL i.MX6UL (N631X S) Board
         items:
-          - const: kontron,imx6ul-n6310-s
-          - const: kontron,imx6ul-n6310-som
+          - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
+          - const: kontron,sl-imx6ul       # Kontron SL i.MX6UL SoM
           - const: fsl,imx6ul
 
-      - description: Kontron N6311 S Board
+      - description: Kontron BL i.MX6UL 43 (N631X S 43) Board
         items:
-          - const: kontron,imx6ul-n6311-s
-          - const: kontron,imx6ul-n6311-som
-          - const: fsl,imx6ul
-
-      - description: Kontron N6310 S 43 Board
-        items:
-          - const: kontron,imx6ul-n6310-s-43
-          - const: kontron,imx6ul-n6310-s
-          - const: kontron,imx6ul-n6310-som
+          - const: kontron,bl-imx6ul-43    # Kontron BL i.MX6UL Carrier Board with 4.3" Display
+          - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
+          - const: kontron,sl-imx6ul       # Kontron SL i.MX6UL SoM
           - const: fsl,imx6ul
 
       - description: TQ-Systems TQMa6UL1 SoM on MBa6ULx board
@@ -637,7 +630,7 @@ properties:
           - enum:
               - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
               - joz,jozacp                # JOZ Access Point
-              - kontron,imx6ull-n6411-som # Kontron N6411 SOM
+              - kontron,sl-imx6ull        # Kontron SL i.MX6ULL SoM
               - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
               - toradex,colibri-imx6ull      # Colibri iMX6ULL Modules
               - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
@@ -698,10 +691,10 @@ properties:
           - const: toradex,colibri-imx6ull-wifi       # Colibri iMX6ULL Wi-Fi / BT Module
           - const: fsl,imx6ull
 
-      - description: Kontron N6411 S Board
+      - description: Kontron BL i.MX6ULL (N6411 S) Board
         items:
-          - const: kontron,imx6ull-n6411-s
-          - const: kontron,imx6ull-n6411-som
+          - const: kontron,bl-imx6ull   # Kontron BL i.MX6ULL Carrier Board
+          - const: kontron,sl-imx6ull   # Kontron SL i.MX6ULL SoM
           - const: fsl,imx6ull
 
       - description: TQ Systems TQMa6ULLx SoM on MBa6ULx board
@@ -825,13 +818,15 @@ properties:
               - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - gateworks,imx8mm-gw7904
               - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw73xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw7901          # i.MX8MM Gateworks Board
               - gw,imx8mm-gw7902          # i.MX8MM Gateworks Board
               - gw,imx8mm-gw7903          # i.MX8MM Gateworks Board
-              - kontron,imx8mm-n801x-som  # i.MX8MM Kontron SL (N801X) SOM
+              - kontron,imx8mm-sl         # i.MX8MM Kontron SL (N801X) SOM
+              - kontron,imx8mm-osm-s      # i.MX8MM Kontron OSM-S (N802X) SOM
               - menlo,mx8menlo            # i.MX8MM Menlo board with Verdin SoM
               - toradex,verdin-imx8mm     # Verdin iMX8M Mini Modules
               - toradex,verdin-imx8mm-nonwifi  # Verdin iMX8M Mini Modules without Wi-Fi / BT
@@ -850,8 +845,14 @@ properties:
 
       - description: Kontron BL i.MX8MM (N801X S) Board
         items:
-          - const: kontron,imx8mm-n801x-s
-          - const: kontron,imx8mm-n801x-som
+          - const: kontron,imx8mm-bl
+          - const: kontron,imx8mm-sl
+          - const: fsl,imx8mm
+
+      - description: Kontron BL i.MX8MM OSM-S (N802X S) Board
+        items:
+          - const: kontron,imx8mm-bl-osm-s
+          - const: kontron,imx8mm-osm-s
           - const: fsl,imx8mm
 
       - description: Toradex Boards with Verdin iMX8M Mini Modules
@@ -936,6 +937,13 @@ properties:
               - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
           - const: fsl,imx8mp
 
+      - description: Avnet (MSC Branded) Boards with SM2S i.MX8M Plus Modules
+        items:
+          - const: avnet,sm2s-imx8mp-14N0600E-ep1 # SM2S-IMX8PLUS-14N0600E on SM2-MB-EP1 Carrier Board
+          - const: avnet,sm2s-imx8mp-14N0600E     # 14N0600E variant of SM2S-IMX8PLUS SoM
+          - const: avnet,sm2s-imx8mp              # SM2S-IMX8PLUS SoM
+          - const: fsl,imx8mp
+
       - description: Engicam i.Core MX8M Plus SoM based boards
         items:
           - enum:
@@ -1034,6 +1042,12 @@ properties:
               - toradex,colibri-imx8x     # Colibri iMX8X Modules
           - const: fsl,imx8qxp
 
+      - description: i.MX8DXL based Boards
+        items:
+          - enum:
+              - fsl,imx8dxl-evk           # i.MX8DXL EVK Board
+          - const: fsl,imx8dxl
+
       - description: i.MX8QXP Boards with Toradex Coilbri iMX8X Modules
         items:
           - enum:

Documentation/devicetree/bindings/arm/rockchip/pmu.yaml

@@ -21,10 +21,12 @@ select:
         enum:
           - rockchip,px30-pmu
           - rockchip,rk3066-pmu
+          - rockchip,rk3128-pmu
           - rockchip,rk3288-pmu
           - rockchip,rk3368-pmu
           - rockchip,rk3399-pmu
           - rockchip,rk3568-pmu
+          - rockchip,rk3588-pmu
 
   required:
     - compatible
@@ -35,10 +37,12 @@ properties:
       - enum:
           - rockchip,px30-pmu
           - rockchip,rk3066-pmu
+          - rockchip,rk3128-pmu
           - rockchip,rk3288-pmu
           - rockchip,rk3368-pmu
           - rockchip,rk3399-pmu
           - rockchip,rk3568-pmu
+          - rockchip,rk3588-pmu
       - const: syscon
       - const: simple-mfd
 

Documentation/devicetree/bindings/firmware/qcom,scm.txt

-QCOM Secure Channel Manager (SCM)
-
-Qualcomm processors include an interface to communicate to the secure firmware.
-This interface allows for clients to request different types of actions.  These
-can include CPU power up/down, HDCP requests, loading of firmware, and other
-assorted actions.
-
-Required properties:
-- compatible: must contain one of the following:
- * "qcom,scm-apq8064"
- * "qcom,scm-apq8084"
- * "qcom,scm-ipq4019"
- * "qcom,scm-ipq806x"
- * "qcom,scm-ipq8074"
- * "qcom,scm-mdm9607"
- * "qcom,scm-msm8226"
- * "qcom,scm-msm8660"
- * "qcom,scm-msm8916"
- * "qcom,scm-msm8953"
- * "qcom,scm-msm8960"
- * "qcom,scm-msm8974"
- * "qcom,scm-msm8976"
- * "qcom,scm-msm8994"
- * "qcom,scm-msm8996"
- * "qcom,scm-msm8998"
- * "qcom,scm-qcs404"
- * "qcom,scm-sc7180"
- * "qcom,scm-sc7280"
- * "qcom,scm-sm6125"
- * "qcom,scm-sdm845"
- * "qcom,scm-sdx55"
- * "qcom,scm-sdx65"
- * "qcom,scm-sm6350"
- * "qcom,scm-sm8150"
- * "qcom,scm-sm8250"
- * "qcom,scm-sm8350"
- * "qcom,scm-sm8450"
- and:
- * "qcom,scm"
-- clocks: Specifies clocks needed by the SCM interface, if any:
- * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
-   "qcom,scm-msm8960"
- * core, iface and bus clocks required for "qcom,scm-apq8084",
-   "qcom,scm-msm8916", "qcom,scm-msm8953", "qcom,scm-msm8974" and "qcom,scm-msm8976"
-- clock-names: Must contain "core" for the core clock, "iface" for the interface
-  clock and "bus" for the bus clock per the requirements of the compatible.
-- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
-		   download mode control register (optional)
-- interconnects: Specifies the bandwidth requirements of the SCM interface (optional)
-
-Example for MSM8916:
-
-	firmware {
-		scm {
-			compatible = "qcom,msm8916", "qcom,scm";
-			clocks = <&gcc GCC_CRYPTO_CLK> ,
-				 <&gcc GCC_CRYPTO_AXI_CLK>,
-				 <&gcc GCC_CRYPTO_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};

Documentation/devicetree/bindings/firmware/qcom,scm.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/qcom,scm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM Secure Channel Manager (SCM)
+
+description: |
+  Qualcomm processors include an interface to communicate to the secure firmware.
+  This interface allows for clients to request different types of actions.
+  These can include CPU power up/down, HDCP requests, loading of firmware,
+  and other assorted actions.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Robert Marko <robimarko@gmail.com>
+  - Guru Das Srinagesh <quic_gurus@quicinc.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,scm-apq8064
+          - qcom,scm-apq8084
+          - qcom,scm-ipq4019
+          - qcom,scm-ipq6018
+          - qcom,scm-ipq806x
+          - qcom,scm-ipq8074
+          - qcom,scm-mdm9607
+          - qcom,scm-msm8226
+          - qcom,scm-msm8660
+          - qcom,scm-msm8916
+          - qcom,scm-msm8953
+          - qcom,scm-msm8960
+          - qcom,scm-msm8974
+          - qcom,scm-msm8976
+          - qcom,scm-msm8994
+          - qcom,scm-msm8996
+          - qcom,scm-msm8998
+          - qcom,scm-sc7180
+          - qcom,scm-sc7280
+          - qcom,scm-sc8280xp
+          - qcom,scm-sdm845
+          - qcom,scm-sdx55
+          - qcom,scm-sdx65
+          - qcom,scm-sm6115
+          - qcom,scm-sm6125
+          - qcom,scm-sm6350
+          - qcom,scm-sm8150
+          - qcom,scm-sm8250
+          - qcom,scm-sm8350
+          - qcom,scm-sm8450
+          - qcom,scm-qcs404
+      - const: qcom,scm
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+  qcom,dload-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the download mode control register
+    description: TCSR hardware block
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8064
+              - qcom,scm-msm8660
+              - qcom,scm-msm8960
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+
+        clocks:
+          maxItems: 1
+
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8084
+              - qcom,scm-mdm9607
+              - qcom,scm-msm8916
+              - qcom,scm-msm8953
+              - qcom,scm-msm8974
+              - qcom,scm-msm8976
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+            - const: bus
+            - const: iface
+
+        clocks:
+          minItems: 3
+          maxItems: 3
+
+      required:
+        - clocks
+        - clock-names
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+    firmware {
+        scm {
+            compatible = "qcom,scm-msm8916", "qcom,scm";
+            clocks = <&gcc GCC_CRYPTO_CLK>,
+                     <&gcc GCC_CRYPTO_AXI_CLK>,
+                     <&gcc GCC_CRYPTO_AHB_CLK>;
+            clock-names = "core", "bus", "iface";
+        };
+    };

Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml

@@ -24,9 +24,12 @@ properties:
     oneOf:
       - items:
           - enum:
+              - qcom,sc7280-bwmon
               - qcom,sdm845-bwmon
           - const: qcom,msm8998-bwmon
       - const: qcom,msm8998-bwmon       # BWMON v4
+      - const: qcom,sc7280-llcc-bwmon   # BWMON v5
+      - const: qcom,sdm845-llcc-bwmon   # BWMON v5
 
   interconnects:
     maxItems: 1

Documentation/devicetree/bindings/media/exynos5-gsc.txt

-* Samsung Exynos5 G-Scaler device
-
-G-Scaler is used for scaling and color space conversion on Exynos5 SoCs.
-
-Required properties:
-- compatible: should be one of
-	      "samsung,exynos5250-gsc"
-	      "samsung,exynos5420-gsc"
-	      "samsung,exynos5433-gsc"
-	      "samsung,exynos5-gsc" (deprecated)
-- reg: should contain G-Scaler physical address location and length.
-- interrupts: should contain G-Scaler interrupt number
-
-Optional properties:
-- samsung,sysreg: handle to syscon used to control the system registers to
-  set writeback input and destination
-
-Example:
-
-gsc_0:  gsc@13e00000 {
-	compatible = "samsung,exynos5250-gsc";
-	reg = <0x13e00000 0x1000>;
-	interrupts = <0 85 0>;
-};
-
-Aliases:
-Each G-Scaler node should have a numbered alias in the aliases node,
-in the form of gscN, N = 0...3. G-Scaler driver uses these aliases
-to retrieve the device IDs using "of_alias_get_id()" call.
-
-Example:
-
-aliases {
-	gsc0 =&gsc_0;
-	gsc1 =&gsc_1;
-	gsc2 =&gsc_2;
-	gsc3 =&gsc_3;
-};

Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos5250-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC G-Scaler
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Seung-Woo Kim <sw0312.kim@samsung.com
+
+description:
+  G-Scaler is used for scaling and color space conversion on Samsung Exynos
+  SoCs.
+
+  Each G-Scaler node should have a numbered alias in the aliases node, in the
+  form of gscN, N = 0...3.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,exynos5250-gsc
+              - samsung,exynos5420-gsc
+          - const: samsung,exynos5-gsc
+      - enum:
+          - samsung,exynos5433-gsc
+      - const: samsung,exynos5-gsc
+        deprecated: True
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Syscon used to control the system registers to set writeback input and destination.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5-gsc
+              - samsung,exynos5250-gsc
+              - samsung,exynos5420-gsc
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: gscl
+    else:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+            - const: aclk_gsclbend
+            - const: gsd
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    video-scaler@13e00000 {
+        compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+        reg = <0x13e00000 0x1000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_gsc>;
+        clocks = <&clock CLK_GSCL0>;
+        clock-names = "gscl";
+        iommus = <&sysmmu_gsc0>;
+    };

Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/brcm,brcmstb-memc-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory controller (MEMC) for Broadcom STB
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,brcmstb-memc-ddr-rev-b.1.x
+          - brcm,brcmstb-memc-ddr-rev-b.2.0
+          - brcm,brcmstb-memc-ddr-rev-b.2.1
+          - brcm,brcmstb-memc-ddr-rev-b.2.2
+          - brcm,brcmstb-memc-ddr-rev-b.2.3
+          - brcm,brcmstb-memc-ddr-rev-b.2.5
+          - brcm,brcmstb-memc-ddr-rev-b.2.6
+          - brcm,brcmstb-memc-ddr-rev-b.2.7
+          - brcm,brcmstb-memc-ddr-rev-b.2.8
+          - brcm,brcmstb-memc-ddr-rev-b.3.0
+          - brcm,brcmstb-memc-ddr-rev-b.3.1
+          - brcm,brcmstb-memc-ddr-rev-c.1.0
+          - brcm,brcmstb-memc-ddr-rev-c.1.1
+          - brcm,brcmstb-memc-ddr-rev-c.1.2
+          - brcm,brcmstb-memc-ddr-rev-c.1.3
+          - brcm,brcmstb-memc-ddr-rev-c.1.4
+      - const: brcm,brcmstb-memc-ddr
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    description: DDR PHY frequency in Hz
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@9902000 {
+        compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1", "brcm,brcmstb-memc-ddr";
+        reg = <0x9902000 0x600>;
+        clock-frequency = <2133000000>;
+    };

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml

@@ -16,7 +16,7 @@ description: |
   MediaTek SMI have two generations of HW architecture, here is the list
   which generation the SoCs use:
   generation 1: mt2701 and mt7623.
-  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8192 and mt8195.
+  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8188, mt8192 and mt8195.
 
   There's slight differences between the two SMI, for generation 2, the
   register which control the iommu port is at each larb's register base. But
@@ -37,6 +37,8 @@ properties:
           - mediatek,mt8173-smi-common
           - mediatek,mt8183-smi-common
           - mediatek,mt8186-smi-common
+          - mediatek,mt8188-smi-common-vdo
+          - mediatek,mt8188-smi-common-vpp
           - mediatek,mt8192-smi-common
           - mediatek,mt8195-smi-common-vdo
           - mediatek,mt8195-smi-common-vpp
@@ -144,7 +146,16 @@ allOf:
             - const: gals0
             - const: gals1
 
-    else:  # for gen2 HW that don't have gals
+  - if:  # for gen2 HW that don't have gals
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt2712-smi-common
+            - mediatek,mt6795-smi-common
+            - mediatek,mt8167-smi-common
+            - mediatek,mt8173-smi-common
+
+    then:
       properties:
         clocks:
           minItems: 2

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml

@@ -25,6 +25,7 @@ properties:
           - mediatek,mt8173-smi-larb
           - mediatek,mt8183-smi-larb
           - mediatek,mt8186-smi-larb
+          - mediatek,mt8188-smi-larb
           - mediatek,mt8192-smi-larb
           - mediatek,mt8195-smi-larb
 
@@ -78,6 +79,7 @@ allOf:
           enum:
             - mediatek,mt8183-smi-larb
             - mediatek,mt8186-smi-larb
+            - mediatek,mt8188-smi-larb
             - mediatek,mt8195-smi-larb
 
     then:
@@ -111,6 +113,7 @@ allOf:
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
               - mediatek,mt8186-smi-larb
+              - mediatek,mt8188-smi-larb
               - mediatek,mt8192-smi-larb
               - mediatek,mt8195-smi-larb
 

Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/snps,dw-umctl2-ddrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Universal Multi-Protocol Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Manish Narani <manish.narani@xilinx.com>
+  - Michal Simek <michal.simek@xilinx.com>
+
+description: |
+  Synopsys DesignWare Enhanced uMCTL2 DDR Memory Controller is capable of
+  working with the memory devices supporting up to (LP)DDR4 protocol. It can
+  be equipped with SEC/DEC ECC feature if DRAM data bus width is either
+  16-bits or 32-bits or 64-bits wide.
+
+  For instance the ZynqMP DDR controller is based on the DW uMCTL2 v2.40a
+  controller. It has an optional SEC/DEC ECC support in 64- and 32-bits
+  bus width configurations.
+
+properties:
+  compatible:
+    oneOf:
+      - deprecated: true
+        description: Synopsys DW uMCTL2 DDR controller v3.80a
+        const: snps,ddrc-3.80a
+      - description: Synopsys DW uMCTL2 DDR controller
+        const: snps,dw-umctl2-ddrc
+      - description: Xilinx ZynqMP DDR controller v2.40a
+        const: xlnx,zynqmp-ddrc-2.40a
+
+  interrupts:
+    description:
+      DW uMCTL2 DDRC IP-core provides individual IRQ signal for each event":"
+      ECC Corrected Error, ECC Uncorrected Error, ECC Address Protection,
+      Scrubber-Done signal, DFI Parity/CRC Error. Some platforms may have the
+      signals merged before they reach the IRQ controller or have some of them
+      absent in case if the corresponding feature is unavailable/disabled.
+    minItems: 1
+    maxItems: 5
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 5
+    oneOf:
+      - description: Common ECC CE/UE/Scrubber/DFI Errors IRQ
+        items:
+          - const: ecc
+      - description: Individual ECC CE/UE/Scrubber/DFI Errors IRQs
+        items:
+          enum: [ ecc_ce, ecc_ue, ecc_ap, ecc_sbr, dfi_e ]
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      A standard set of the clock sources contains CSRs bus clock, AXI-ports
+      reference clock, DDRC core clock, Scrubber standalone clock
+      (synchronous to the DDRC clock).
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ pclk, aclk, core, sbr ]
+
+  resets:
+    description:
+      Each clock domain can have separate reset signal.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ prst, arst, core, sbr ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    memory-controller@fd070000 {
+      compatible = "xlnx,zynqmp-ddrc-2.40a";
+      reg = <0xfd070000 0x30000>;
+
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "ecc";
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    memory-controller@3d400000 {
+      compatible = "snps,dw-umctl2-ddrc";
+      reg = <0x3d400000 0x400000>;
+
+      interrupts = <147 IRQ_TYPE_LEVEL_HIGH>, <148 IRQ_TYPE_LEVEL_HIGH>,
+                   <149 IRQ_TYPE_LEVEL_HIGH>, <150 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "ecc_ce", "ecc_ue", "ecc_sbr", "dfi_e";
+
+      clocks = <&pclk>, <&aclk>, <&core_clk>, <&sbr_clk>;
+      clock-names = "pclk", "aclk", "core", "sbr";
+    };
+...

Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml

-# SPDX-License-Identifier: GPL-2.0-only
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/memory-controllers/synopsys,ddrc-ecc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Synopsys IntelliDDR Multi Protocol memory controller
-
-maintainers:
-  - Krzysztof Kozlowski <krzk@kernel.org>
-  - Manish Narani <manish.narani@xilinx.com>
-  - Michal Simek <michal.simek@xilinx.com>
-
-description: |
-  The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and
-  32-bit bus width configurations.
-
-  The Zynq DDR ECC controller has an optional ECC support in half-bus width
-  (16-bit) configuration.
-
-  These both ECC controllers correct single bit ECC errors and detect double bit
-  ECC errors.
-
-properties:
-  compatible:
-    enum:
-      - snps,ddrc-3.80a
-      - xlnx,zynq-ddrc-a05
-      - xlnx,zynqmp-ddrc-2.40a
-
-  interrupts:
-    maxItems: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - snps,ddrc-3.80a
-              - xlnx,zynqmp-ddrc-2.40a
-    then:
-      required:
-        - interrupts
-    else:
-      properties:
-        interrupts: false
-
-additionalProperties: false
-
-examples:
-  - |
-    memory-controller@f8006000 {
-        compatible = "xlnx,zynq-ddrc-a05";
-        reg = <0xf8006000 0x1000>;
-    };
-
-  - |
-    axi {
-        #address-cells = <2>;
-        #size-cells = <2>;
-
-        memory-controller@fd070000 {
-            compatible = "xlnx,zynqmp-ddrc-2.40a";
-            reg = <0x0 0xfd070000 0x0 0x30000>;
-            interrupt-parent = <&gic>;
-            interrupts = <0 112 4>;
-        };
-    };

Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,zynq-ddrc-a05.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq A05 DDR Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Manish Narani <manish.narani@xilinx.com>
+  - Michal Simek <michal.simek@xilinx.com>
+
+description:
+  The Zynq DDR ECC controller has an optional ECC support in half-bus width
+  (16-bit) configuration. It is cappable of correcting single bit ECC errors
+  and detecting double bit ECC errors.
+
+properties:
+  compatible:
+    const: xlnx,zynq-ddrc-a05
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@f8006000 {
+      compatible = "xlnx,zynq-ddrc-a05";
+      reg = <0xf8006000 0x1000>;
+    };
+...

Documentation/devicetree/bindings/mfd/syscon.yaml

@@ -40,6 +40,8 @@ properties:
               - allwinner,sun50i-a64-system-controller
               - brcm,cru-clkset
               - freecom,fsg-cs2-system-controller
+              - fsl,imx93-aonmix-ns-syscfg
+              - fsl,imx93-wakeupmix-syscfg
               - hisilicon,dsa-subctrl
               - hisilicon,hi6220-sramctrl
               - hisilicon,pcie-sas-subctrl

Documentation/devicetree/bindings/power/mediatek,power-controller.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Mediatek Power Domains Controller
 
 maintainers:
-  - Weiyi Lu <weiyi.lu@mediatek.com>
+  - MandyJH Liu <mandyjh.liu@mediatek.com>
   - Matthias Brugger <mbrugger@suse.com>
 
 description: |
@@ -19,7 +19,7 @@ description: |
 
 properties:
   $nodename:
-    const: power-controller
+    pattern: '^power-controller(@[0-9a-f]+)?$'
 
   compatible:
     enum:
@@ -42,6 +42,23 @@ properties:
 
 patternProperties:
   "^power-domain@[0-9a-f]+$":
+    $ref: "#/$defs/power-domain-node"
+    patternProperties:
+      "^power-domain@[0-9a-f]+$":
+        $ref: "#/$defs/power-domain-node"
+        patternProperties:
+          "^power-domain@[0-9a-f]+$":
+            $ref: "#/$defs/power-domain-node"
+            patternProperties:
+              "^power-domain@[0-9a-f]+$":
+                $ref: "#/$defs/power-domain-node"
+                unevaluatedProperties: false
+            unevaluatedProperties: false
+        unevaluatedProperties: false
+    unevaluatedProperties: false
+
+$defs:
+  power-domain-node:
     type: object
     description: |
       Represents the power domains within the power controller node as documented
@@ -100,123 +117,9 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/phandle
         description: phandle to the device containing the SMI register range.
 
-    patternProperties:
-      "^power-domain@[0-9a-f]+$":
-        type: object
-        description: |
-          Represents a power domain child within a power domain parent node.
-
-        properties:
-
-          '#power-domain-cells':
-            description:
-              Must be 0 for nodes representing a single PM domain and 1 for nodes
-              providing multiple PM domains.
-
-          '#address-cells':
-            const: 1
-
-          '#size-cells':
-            const: 0
-
-          reg:
-            maxItems: 1
-
-          clocks:
-            description: |
-              A number of phandles to clocks that need to be enabled during domain
-              power-up sequencing.
-
-          clock-names:
-            description: |
-              List of names of clocks, in order to match the power-up sequencing
-              for each power domain we need to group the clocks by name. BASIC
-              clocks need to be enabled before enabling the corresponding power
-              domain, and should not have a '-' in their name (i.e mm, mfg, venc).
-              SUSBYS clocks need to be enabled before releasing the bus protection,
-              and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
-
-              In order to follow properly the power-up sequencing, the clocks must
-              be specified by order, adding first the BASIC clocks followed by the
-              SUSBSYS clocks.
-
-          domain-supply:
-            description: domain regulator supply.
-
-          mediatek,infracfg:
-            $ref: /schemas/types.yaml#/definitions/phandle
-            description: phandle to the device containing the INFRACFG register range.
-
-          mediatek,smi:
-            $ref: /schemas/types.yaml#/definitions/phandle
-            description: phandle to the device containing the SMI register range.
-
-        patternProperties:
-          "^power-domain@[0-9a-f]+$":
-            type: object
-            description: |
-              Represents a power domain child within a power domain parent node.
-
-            properties:
-
-              '#power-domain-cells':
-                description:
-                  Must be 0 for nodes representing a single PM domain and 1 for nodes
-                  providing multiple PM domains.
-
-              '#address-cells':
-                const: 1
-
-              '#size-cells':
-                const: 0
-
-              reg:
-                maxItems: 1
-
-              clocks:
-                description: |
-                  A number of phandles to clocks that need to be enabled during domain
-                  power-up sequencing.
-
-              clock-names:
-                description: |
-                  List of names of clocks, in order to match the power-up sequencing
-                  for each power domain we need to group the clocks by name. BASIC
-                  clocks need to be enabled before enabling the corresponding power
-                  domain, and should not have a '-' in their name (i.e mm, mfg, venc).
-                  SUSBYS clocks need to be enabled before releasing the bus protection,
-                  and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
-
-                  In order to follow properly the power-up sequencing, the clocks must
-                  be specified by order, adding first the BASIC clocks followed by the
-                  SUSBSYS clocks.
-
-              domain-supply:
-                description: domain regulator supply.
-
-              mediatek,infracfg:
-                $ref: /schemas/types.yaml#/definitions/phandle
-                description: phandle to the device containing the INFRACFG register range.
-
-              mediatek,smi:
-                $ref: /schemas/types.yaml#/definitions/phandle
-                description: phandle to the device containing the SMI register range.
-
-            required:
-              - reg
-
-            additionalProperties: false
-
-        required:
-          - reg
-
-        additionalProperties: false
-
     required:
       - reg
 
-    additionalProperties: false
-
 required:
   - compatible
 

Documentation/devicetree/bindings/power/qcom,rpmpd.yaml

@@ -40,6 +40,7 @@ properties:
       - qcom,sm6115-rpmpd
       - qcom,sm6125-rpmpd
       - qcom,sm6350-rpmhpd
+      - qcom,sm6375-rpmpd
       - qcom,sm8150-rpmhpd
       - qcom,sm8250-rpmhpd
       - qcom,sm8350-rpmhpd

Documentation/devicetree/bindings/power/rockchip,power-controller.yaml

@@ -41,6 +41,8 @@ properties:
       - rockchip,rk3368-power-controller
       - rockchip,rk3399-power-controller
       - rockchip,rk3568-power-controller
+      - rockchip,rk3588-power-controller
+      - rockchip,rv1126-power-controller
 
   "#power-domain-cells":
     const: 1
@@ -119,6 +121,8 @@ $defs:
           "include/dt-bindings/power/rk3368-power.h"
           "include/dt-bindings/power/rk3399-power.h"
           "include/dt-bindings/power/rk3568-power.h"
+          "include/dt-bindings/power/rk3588-power.h"
+          "include/dt-bindings/power/rockchip,rv1126-power.h"
 
       clocks:
         minItems: 1

Documentation/devicetree/bindings/power/rockchip-io-domain.yaml

@@ -58,6 +58,7 @@ properties:
       - rockchip,rk3568-pmu-io-voltage-domain
       - rockchip,rv1108-io-voltage-domain
       - rockchip,rv1108-pmu-io-voltage-domain
+      - rockchip,rv1126-pmu-io-voltage-domain
 
 required:
   - compatible
@@ -78,6 +79,7 @@ allOf:
   - $ref: "#/$defs/rk3568-pmu"
   - $ref: "#/$defs/rv1108"
   - $ref: "#/$defs/rv1108-pmu"
+  - $ref: "#/$defs/rv1126-pmu"
 
 $defs:
   px30:
@@ -344,6 +346,34 @@ $defs:
         pmu-supply:
           description: The supply connected to PMUIO_VDD.
 
+  rv1126-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rv1126-pmu-io-voltage-domain
+
+    then:
+      properties:
+        vccio1-supply:
+          description: The supply connected to VCCIO1.
+        vccio2-supply:
+          description: The supply connected to VCCIO2.
+        vccio3-supply:
+          description: The supply connected to VCCIO3.
+        vccio4-supply:
+          description: The supply connected to VCCIO4.
+        vccio5-supply:
+          description: The supply connected to VCCIO5.
+        vccio6-supply:
+          description: The supply connected to VCCIO6.
+        vccio7-supply:
+          description: The supply connected to VCCIO7.
+        pmuio0-supply:
+          description: The supply connected to PMUIO0.
+        pmuio1-supply:
+          description: The supply connected to PMUIO1.
+
 examples:
   - |
     io-domains {

Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml

@@ -27,25 +27,22 @@ properties:
     const: 1
 
   power-domains:
-    minItems: 4
     maxItems: 4
 
   power-domain-names:
-    items:
-      - const: bus
-      - const: g1
-      - const: g2
-      - const: h1
+    maxItems: 4
 
   clocks:
-    minItems: 3
     maxItems: 3
 
   clock-names:
-    items:
-      - const: g1
-      - const: g2
-      - const: h1
+    maxItems: 3
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
 
 required:
   - compatible
@@ -55,6 +52,97 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mm-vpu-blk-ctrl
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: bus power domain
+            - description: G1 decoder power domain
+            - description: G2 decoder power domain
+            - description: H1 encoder power domain
+
+        power-domain-names:
+          items:
+            - const: bus
+            - const: g1
+            - const: g2
+            - const: h1
+
+        clocks:
+          items:
+            - description: G1 decoder clk
+            - description: G2 decoder clk
+            - description: H1 encoder clk
+
+        clock-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: h1
+
+        interconnects:
+          items:
+            - description: G1 decoder interconnect
+            - description: G2 decoder interconnect
+            - description: H1 encoder power domain
+
+        interconnect-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: h1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-vpu-blk-ctrl
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: bus power domain
+            - description: G1 decoder power domain
+            - description: G2 decoder power domain
+            - description: VC8000E encoder power domain
+
+        power-domain-names:
+          items:
+            - const: bus
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+        clocks:
+          items:
+            - description: G1 decoder clk
+            - description: G2 decoder clk
+            - description: VC8000E encoder clk
+
+        clock-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+        interconnects:
+          items:
+            - description: G1 decoder interconnect
+            - description: G2 decoder interconnect
+            - description: VC8000E encoder interconnect
+
+        interconnect-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml

@@ -52,6 +52,15 @@ properties:
       - const: ref_266m
       - const: ref_24m
 
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    items:
+      - const: hrv
+      - const: lcdif-hdmi
+      - const: hdcp
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml

@@ -48,6 +48,16 @@ properties:
       - const: usb
       - const: pcie
 
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: noc-pcie
+      - const: usb1
+      - const: usb2
+      - const: pcie
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml

@@ -64,6 +64,20 @@ properties:
       - const: isp
       - const: phy
 
+  interconnects:
+    maxItems: 8
+
+  interconnect-names:
+    items:
+      - const: lcdif-rd
+      - const: lcdif-wr
+      - const: isi0
+      - const: isi1
+      - const: isi2
+      - const: isp0
+      - const: isp1
+      - const: dwe
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-media-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 Media blk-ctrl
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description:
+  The i.MX93 MEDIAMIX domain contains control and status registers known
+  as MEDIAMIX Block Control (MEDIAMIX BLK_CTRL). These registers include
+  clocking, reset, and miscellaneous top-level controls for peripherals
+  within the MEDIAMIX domain
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx93-media-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 10
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: nic
+      - const: disp
+      - const: cam
+      - const: pxp
+      - const: lcdif
+      - const: isi
+      - const: csi
+      - const: dsi
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/power/fsl,imx93-power.h>
+
+    media_blk_ctrl: system-controller@4ac10000 {
+      compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+      reg = <0x4ac10000 0x10000>;
+      power-domains = <&mediamix>;
+      clocks = <&clk IMX93_CLK_MEDIA_APB>,
+               <&clk IMX93_CLK_MEDIA_AXI>,
+               <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+               <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+               <&clk IMX93_CLK_CAM_PIX>,
+               <&clk IMX93_CLK_PXP_GATE>,
+               <&clk IMX93_CLK_LCDIF_GATE>,
+               <&clk IMX93_CLK_ISI_GATE>,
+               <&clk IMX93_CLK_MIPI_CSI_GATE>,
+               <&clk IMX93_CLK_MIPI_DSI_GATE>;
+               clock-names = "apb", "axi", "nic", "disp", "cam",
+                             "pxp", "lcdif", "isi", "csi", "dsi";
+      #power-domain-cells = <1>;
+    };

Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 System Reset Controller
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  The System Reset Controller (SRC) is responsible for the generation of
+  all the system reset signals and boot argument latching.
+
+  Its main functions are as follows,
+  - Deals with all global system reset sources from other modules,
+    and generates global system reset.
+  - Responsible for power gating of MIXs (Slices) and their memory
+    low power control.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx93-src
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "power-domain@[0-9a-f]+$":
+
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: fsl,imx93-src-slice
+
+      '#power-domain-cells':
+        const: 0
+
+      reg:
+        items:
+          - description: mix slice register region
+          - description: mem slice register region
+
+      clocks:
+        description: |
+          A number of phandles to clocks that need to be enabled
+          during domain power-up sequencing to ensure reset
+          propagation into devices located inside this power domain.
+        minItems: 1
+        maxItems: 5
+
+    required:
+      - compatible
+      - '#power-domain-cells'
+      - reg
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx93-clock.h>
+
+    system-controller@44460000 {
+        compatible = "fsl,imx93-src", "syscon";
+        reg = <0x44460000 0x10000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        mediamix: power-domain@0 {
+            compatible = "fsl,imx93-src-slice";
+            reg = <0x44462400 0x400>, <0x44465800 0x400>;
+            #power-domain-cells = <0>;
+            clocks = <&clk IMX93_CLK_MEDIA_AXI>,
+                     <&clk IMX93_CLK_MEDIA_APB>;
+        };
+    };

Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml

@@ -26,10 +26,12 @@ properties:
     enum:
       - mediatek,mt2701-disp-mutex
       - mediatek,mt2712-disp-mutex
+      - mediatek,mt6795-disp-mutex
       - mediatek,mt8167-disp-mutex
       - mediatek,mt8173-disp-mutex
       - mediatek,mt8183-disp-mutex
       - mediatek,mt8186-disp-mutex
+      - mediatek,mt8186-mdp3-mutex
       - mediatek,mt8192-disp-mutex
       - mediatek,mt8195-disp-mutex
 

Documentation/devicetree/bindings/soc/mediatek/pwrap.txt

@@ -28,6 +28,7 @@ Required properties in pwrap device node.
 	"mediatek,mt8173-pwrap" for MT8173 SoCs
 	"mediatek,mt8183-pwrap" for MT8183 SoCs
 	"mediatek,mt8186-pwrap" for MT8186 SoCs
+	"mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap" for MT8188 SoCs
 	"mediatek,mt8195-pwrap" for MT8195 SoCs
 	"mediatek,mt8516-pwrap" for MT8516 SoCs
 - interrupts: IRQ for pwrap in SOC

Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml

@@ -20,6 +20,7 @@ properties:
   compatible:
     enum:
       - qcom,rpmh-stats
+      - qcom,sdm845-rpmh-stats
       - qcom,rpm-stats
       # For older RPM firmware versions with fixed offset for the sleep stats
       - qcom,apq8084-rpm-stats

Documentation/devicetree/bindings/soc/rockchip/grf.yaml

@@ -16,9 +16,12 @@ properties:
           - enum:
               - rockchip,rk3288-sgrf
               - rockchip,rk3566-pipe-grf
+              - rockchip,rk3568-pcie3-phy-grf
               - rockchip,rk3568-pipe-grf
               - rockchip,rk3568-pipe-phy-grf
               - rockchip,rk3568-usb2phy-grf
+              - rockchip,rk3588-pcie3-phy-grf
+              - rockchip,rk3588-pcie3-pipe-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
       - items:
@@ -28,6 +31,7 @@ properties:
               - rockchip,px30-usb2phy-grf
               - rockchip,rk3036-grf
               - rockchip,rk3066-grf
+              - rockchip,rk3128-grf
               - rockchip,rk3188-grf
               - rockchip,rk3228-grf
               - rockchip,rk3288-grf
@@ -45,6 +49,8 @@ properties:
               - rockchip,rk3568-pmugrf
               - rockchip,rv1108-grf
               - rockchip,rv1108-pmugrf
+              - rockchip,rv1126-grf
+              - rockchip,rv1126-pmugrf
           - const: syscon
           - const: simple-mfd
 
@@ -178,6 +184,7 @@ allOf:
           contains:
             enum:
               - rockchip,px30-usb2phy-grf
+              - rockchip,rk3128-grf
               - rockchip,rk3228-grf
               - rockchip,rk3308-usb2phy-grf
               - rockchip,rk3328-usb2phy-grf

MAINTAINERS

@@ -3125,6 +3125,8 @@ W:	http://wiki.xilinx.com
 T:	git https://github.com/Xilinx/linux-xlnx.git
 F:	Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
 F:	Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+F:	Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
+F:	Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
 F:	Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
 F:	arch/arm/mach-zynq/
 F:	drivers/clocksource/timer-cadence-ttc.c
@@ -5407,8 +5409,8 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 F:	drivers/cpuidle/cpuidle-big_little.c
 
 CPUIDLE DRIVER - ARM EXYNOS
-M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
+R:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 M:	Kukjin Kim <kgene@kernel.org>
 L:	linux-pm@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
@@ -12441,7 +12443,6 @@ F:	drivers/power/supply/max77976_charger.c
 
 MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
 M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 B:	mailto:linux-samsung-soc@vger.kernel.org
@@ -12453,7 +12454,6 @@ F:	drivers/power/supply/max77693_charger.c
 MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
 M:	Chanwoo Choi <cw00.choi@samsung.com>
 M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 B:	mailto:linux-samsung-soc@vger.kernel.org
@@ -16587,14 +16587,6 @@ T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/usb/pwc/*
 F:	include/trace/events/pwc.h
 
-PWM FAN DRIVER
-M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-L:	linux-hwmon@vger.kernel.org
-S:	Supported
-F:	Documentation/devicetree/bindings/hwmon/pwm-fan.txt
-F:	Documentation/hwmon/pwm-fan.rst
-F:	drivers/hwmon/pwm-fan.c
-
 PWM IR Transmitter
 M:	Sean Young <sean@mess.org>
 L:	linux-media@vger.kernel.org
@@ -18055,7 +18047,6 @@ F:	drivers/platform/x86/samsung-laptop.c
 
 SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
 M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Supported

arch/arm/boot/compressed/head.S

@@ -67,11 +67,7 @@
 #if defined(CONFIG_ARCH_SA1100)
 		.macro	loadsp, rb, tmp1, tmp2
 		mov	\rb, #0x80000000	@ physical base address
-#ifdef CONFIG_DEBUG_LL_SER3
-		add	\rb, \rb, #0x00050000	@ Ser3
-#else
 		add	\rb, \rb, #0x00010000	@ Ser1
-#endif
 		.endm
 #else
 		.macro	loadsp,	rb, tmp1, tmp2

drivers/bus/hisi_lpc.c

@@ -85,7 +85,7 @@ static int wait_lpc_idle(void __iomem *mbase, unsigned int waitcnt)
 		ndelay(LPC_NSEC_PERWAIT);
 	} while (--waitcnt);
 
-	return -ETIME;
+	return -ETIMEDOUT;
 }
 
 /*
@@ -347,7 +347,7 @@ static int hisi_lpc_acpi_xlat_io_res(struct acpi_device *adev,
 	unsigned long sys_port;
 	resource_size_t len = resource_size(res);
 
-	sys_port = logic_pio_trans_hwaddr(&host->fwnode, res->start, len);
+	sys_port = logic_pio_trans_hwaddr(acpi_fwnode_handle(host), res->start, len);
 	if (sys_port == ~0UL)
 		return -EFAULT;
 
@@ -472,9 +472,7 @@ static int hisi_lpc_acpi_clear_enumerated(struct acpi_device *adev, void *not_us
 
 struct hisi_lpc_acpi_cell {
 	const char *hid;
-	const char *name;
-	void *pdata;
-	size_t pdata_size;
+	const struct platform_device_info *pdevinfo;
 };
 
 static void hisi_lpc_acpi_remove(struct device *hostdev)
@@ -505,28 +503,45 @@ static int hisi_lpc_acpi_add_child(struct acpi_device *child, void *data)
 		/* ipmi */
 		{
 			.hid = "IPI0001",
-			.name = "hisi-lpc-ipmi",
+			.pdevinfo = (struct platform_device_info []) {
+				{
+					.parent = hostdev,
+					.fwnode = acpi_fwnode_handle(child),
+					.name = "hisi-lpc-ipmi",
+					.id = PLATFORM_DEVID_AUTO,
+					.res = res,
+					.num_res = num_res,
+				},
+			},
 		},
 		/* 8250-compatible uart */
 		{
 			.hid = "HISI1031",
-			.name = "serial8250",
-			.pdata = (struct plat_serial8250_port []) {
+			.pdevinfo = (struct platform_device_info []) {
 				{
-					.iobase = res->start,
-					.uartclk = 1843200,
-					.iotype = UPIO_PORT,
-					.flags = UPF_BOOT_AUTOCONF,
+					.parent = hostdev,
+					.fwnode = acpi_fwnode_handle(child),
+					.name = "serial8250",
+					.id = PLATFORM_DEVID_AUTO,
+					.res = res,
+					.num_res = num_res,
+					.data = (struct plat_serial8250_port []) {
+						{
+							.iobase = res->start,
+							.uartclk = 1843200,
+							.iotype = UPIO_PORT,
+							.flags = UPF_BOOT_AUTOCONF,
+						},
+						{}
+					},
+					.size_data =  2 * sizeof(struct plat_serial8250_port),
 				},
-				{}
 			},
-			.pdata_size = 2 *
-				sizeof(struct plat_serial8250_port),
 		},
 		{}
 	};
 
-	for (; cell && cell->name; cell++) {
+	for (; cell && cell->hid; cell++) {
 		if (!strcmp(cell->hid, hid)) {
 			found = true;
 			break;
@@ -540,31 +555,12 @@ static int hisi_lpc_acpi_add_child(struct acpi_device *child, void *data)
 		return 0;
 	}
 
-	pdev = platform_device_alloc(cell->name, PLATFORM_DEVID_AUTO);
-	if (!pdev)
-		return -ENOMEM;
-
-	pdev->dev.parent = hostdev;
-	ACPI_COMPANION_SET(&pdev->dev, child);
-
-	ret = platform_device_add_resources(pdev, res, num_res);
-	if (ret)
-		goto fail;
-
-	ret = platform_device_add_data(pdev, cell->pdata, cell->pdata_size);
-	if (ret)
-		goto fail;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto fail;
+	pdev = platform_device_register_full(cell->pdevinfo);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
 
 	acpi_device_set_enumerated(child);
 	return 0;
-
-fail:
-	platform_device_put(pdev);
-	return ret;
 }
 
 /*
@@ -589,11 +585,6 @@ static int hisi_lpc_acpi_probe(struct device *hostdev)
 
 	return ret;
 }
-
-static const struct acpi_device_id hisi_lpc_acpi_match[] = {
-	{"HISI0191"},
-	{}
-};
 #else
 static int hisi_lpc_acpi_probe(struct device *dev)
 {
@@ -615,11 +606,9 @@ static void hisi_lpc_acpi_remove(struct device *hostdev)
 static int hisi_lpc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct acpi_device *acpi_device = ACPI_COMPANION(dev);
 	struct logic_pio_hwaddr *range;
 	struct hisi_lpc_dev *lpcdev;
 	resource_size_t io_end;
-	struct resource *res;
 	int ret;
 
 	lpcdev = devm_kzalloc(dev, sizeof(*lpcdev), GFP_KERNEL);
@@ -628,8 +617,7 @@ static int hisi_lpc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&lpcdev->cycle_lock);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	lpcdev->membase = devm_ioremap_resource(dev, res);
+	lpcdev->membase = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(lpcdev->membase))
 		return PTR_ERR(lpcdev->membase);
 
@@ -637,7 +625,7 @@ static int hisi_lpc_probe(struct platform_device *pdev)
 	if (!range)
 		return -ENOMEM;
 
-	range->fwnode = dev->fwnode;
+	range->fwnode = dev_fwnode(dev);
 	range->flags = LOGIC_PIO_INDIRECT;
 	range->size = PIO_INDIRECT_SIZE;
 	range->hostdata = lpcdev;
@@ -651,7 +639,7 @@ static int hisi_lpc_probe(struct platform_device *pdev)
 	}
 
 	/* register the LPC host PIO resources */
-	if (acpi_device)
+	if (is_acpi_device_node(range->fwnode))
 		ret = hisi_lpc_acpi_probe(dev);
 	else
 		ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
@@ -672,11 +660,10 @@ static int hisi_lpc_probe(struct platform_device *pdev)
 static int hisi_lpc_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct acpi_device *acpi_device = ACPI_COMPANION(dev);
 	struct hisi_lpc_dev *lpcdev = dev_get_drvdata(dev);
 	struct logic_pio_hwaddr *range = lpcdev->io_host;
 
-	if (acpi_device)
+	if (is_acpi_device_node(range->fwnode))
 		hisi_lpc_acpi_remove(dev);
 	else
 		of_platform_depopulate(dev);
@@ -692,11 +679,16 @@ static const struct of_device_id hisi_lpc_of_match[] = {
 	{}
 };
 
+static const struct acpi_device_id hisi_lpc_acpi_match[] = {
+	{"HISI0191"},
+	{}
+};
+
 static struct platform_driver hisi_lpc_driver = {
 	.driver = {
 		.name           = DRV_NAME,
 		.of_match_table = hisi_lpc_of_match,
-		.acpi_match_table = ACPI_PTR(hisi_lpc_acpi_match),
+		.acpi_match_table = hisi_lpc_acpi_match,
 	},
 	.probe = hisi_lpc_probe,
 	.remove = hisi_lpc_remove,

drivers/cpuidle/cpuidle-psci-domain.c

@@ -124,10 +124,8 @@ static bool psci_pd_try_set_osi_mode(void)
 		return false;
 
 	ret = psci_set_osi_mode(true);
-	if (ret) {
-		pr_warn("failed to enable OSI mode: %d\n", ret);
+	if (ret)
 		return false;
-	}
 
 	return true;
 }

drivers/firmware/arm_ffa/bus.c

@@ -167,7 +167,8 @@ bool ffa_device_is_valid(struct ffa_device *ffa_dev)
 	return valid;
 }
 
-struct ffa_device *ffa_device_register(const uuid_t *uuid, int vm_id)
+struct ffa_device *ffa_device_register(const uuid_t *uuid, int vm_id,
+				       const struct ffa_ops *ops)
 {
 	int ret;
 	struct device *dev;
@@ -183,6 +184,7 @@ struct ffa_device *ffa_device_register(const uuid_t *uuid, int vm_id)
 	dev_set_name(&ffa_dev->dev, "arm-ffa-%04x", vm_id);
 
 	ffa_dev->vm_id = vm_id;
+	ffa_dev->ops = ops;
 	uuid_copy(&ffa_dev->uuid, uuid);
 
 	ret = device_register(&ffa_dev->dev);

drivers/firmware/arm_ffa/driver.c

@@ -163,6 +163,7 @@ struct ffa_drv_info {
 	struct mutex tx_lock; /* lock to protect Tx buffer */
 	void *rx_buffer;
 	void *tx_buffer;
+	bool mem_ops_native;
 };
 
 static struct ffa_drv_info *drv_info;
@@ -263,18 +264,24 @@ static int ffa_rxtx_unmap(u16 vm_id)
 	return 0;
 }
 
+#define PARTITION_INFO_GET_RETURN_COUNT_ONLY	BIT(0)
+
 /* buffer must be sizeof(struct ffa_partition_info) * num_partitions */
 static int
 __ffa_partition_info_get(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3,
 			 struct ffa_partition_info *buffer, int num_partitions)
 {
-	int count;
+	int idx, count, flags = 0, sz, buf_sz;
 	ffa_value_t partition_info;
 
+	if (!buffer || !num_partitions) /* Just get the count for now */
+		flags = PARTITION_INFO_GET_RETURN_COUNT_ONLY;
+
 	mutex_lock(&drv_info->rx_lock);
 	invoke_ffa_fn((ffa_value_t){
 		      .a0 = FFA_PARTITION_INFO_GET,
 		      .a1 = uuid0, .a2 = uuid1, .a3 = uuid2, .a4 = uuid3,
+		      .a5 = flags,
 		      }, &partition_info);
 
 	if (partition_info.a0 == FFA_ERROR) {
@@ -284,8 +291,19 @@ __ffa_partition_info_get(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3,
 
 	count = partition_info.a2;
 
+	if (drv_info->version > FFA_VERSION_1_0) {
+		buf_sz = sz = partition_info.a3;
+		if (sz > sizeof(*buffer))
+			buf_sz = sizeof(*buffer);
+	} else {
+		/* FFA_VERSION_1_0 lacks size in the response */
+		buf_sz = sz = 8;
+	}
+
 	if (buffer && count <= num_partitions)
-		memcpy(buffer, drv_info->rx_buffer, sizeof(*buffer) * count);
+		for (idx = 0; idx < count; idx++)
+			memcpy(buffer + idx, drv_info->rx_buffer + idx * sz,
+			       buf_sz);
 
 	ffa_rx_release();
 
@@ -571,6 +589,39 @@ static int ffa_memory_reclaim(u64 g_handle, u32 flags)
 	return 0;
 }
 
+static int ffa_features(u32 func_feat_id, u32 input_props,
+			u32 *if_props_1, u32 *if_props_2)
+{
+	ffa_value_t id;
+
+	if (!ARM_SMCCC_IS_FAST_CALL(func_feat_id) && input_props) {
+		pr_err("%s: Invalid Parameters: %x, %x", __func__,
+		       func_feat_id, input_props);
+		return ffa_to_linux_errno(FFA_RET_INVALID_PARAMETERS);
+	}
+
+	invoke_ffa_fn((ffa_value_t){
+		.a0 = FFA_FEATURES, .a1 = func_feat_id, .a2 = input_props,
+		}, &id);
+
+	if (id.a0 == FFA_ERROR)
+		return ffa_to_linux_errno((int)id.a2);
+
+	if (if_props_1)
+		*if_props_1 = id.a2;
+	if (if_props_2)
+		*if_props_2 = id.a3;
+
+	return 0;
+}
+
+static void ffa_set_up_mem_ops_native_flag(void)
+{
+	if (!ffa_features(FFA_FN_NATIVE(MEM_LEND), 0, NULL, NULL) ||
+	    !ffa_features(FFA_FN_NATIVE(MEM_SHARE), 0, NULL, NULL))
+		drv_info->mem_ops_native = true;
+}
+
 static u32 ffa_api_version_get(void)
 {
 	return drv_info->version;
@@ -597,11 +648,19 @@ static int ffa_partition_info_get(const char *uuid_str,
 	return 0;
 }
 
-static void ffa_mode_32bit_set(struct ffa_device *dev)
+static void _ffa_mode_32bit_set(struct ffa_device *dev)
 {
 	dev->mode_32bit = true;
 }
 
+static void ffa_mode_32bit_set(struct ffa_device *dev)
+{
+	if (drv_info->version > FFA_VERSION_1_0)
+		return;
+
+	_ffa_mode_32bit_set(dev);
+}
+
 static int ffa_sync_send_receive(struct ffa_device *dev,
 				 struct ffa_send_direct_data *data)
 {
@@ -609,17 +668,15 @@ static int ffa_sync_send_receive(struct ffa_device *dev,
 				       dev->mode_32bit, data);
 }
 
-static int
-ffa_memory_share(struct ffa_device *dev, struct ffa_mem_ops_args *args)
+static int ffa_memory_share(struct ffa_mem_ops_args *args)
 {
-	if (dev->mode_32bit)
-		return ffa_memory_ops(FFA_MEM_SHARE, args);
+	if (drv_info->mem_ops_native)
+		return ffa_memory_ops(FFA_FN_NATIVE(MEM_SHARE), args);
 
-	return ffa_memory_ops(FFA_FN_NATIVE(MEM_SHARE), args);
+	return ffa_memory_ops(FFA_MEM_SHARE, args);
 }
 
-static int
-ffa_memory_lend(struct ffa_device *dev, struct ffa_mem_ops_args *args)
+static int ffa_memory_lend(struct ffa_mem_ops_args *args)
 {
 	/* Note that upon a successful MEM_LEND request the caller
 	 * must ensure that the memory region specified is not accessed
@@ -628,36 +685,47 @@ ffa_memory_lend(struct ffa_device *dev, struct ffa_mem_ops_args *args)
 	 * however on systems without a hypervisor the responsibility
 	 * falls to the calling kernel driver to prevent access.
 	 */
-	if (dev->mode_32bit)
-		return ffa_memory_ops(FFA_MEM_LEND, args);
+	if (drv_info->mem_ops_native)
+		return ffa_memory_ops(FFA_FN_NATIVE(MEM_LEND), args);
 
-	return ffa_memory_ops(FFA_FN_NATIVE(MEM_LEND), args);
+	return ffa_memory_ops(FFA_MEM_LEND, args);
 }
 
-static const struct ffa_dev_ops ffa_ops = {
+static const struct ffa_info_ops ffa_drv_info_ops = {
 	.api_version_get = ffa_api_version_get,
 	.partition_info_get = ffa_partition_info_get,
+};
+
+static const struct ffa_msg_ops ffa_drv_msg_ops = {
 	.mode_32bit_set = ffa_mode_32bit_set,
 	.sync_send_receive = ffa_sync_send_receive,
+};
+
+static const struct ffa_mem_ops ffa_drv_mem_ops = {
 	.memory_reclaim = ffa_memory_reclaim,
 	.memory_share = ffa_memory_share,
 	.memory_lend = ffa_memory_lend,
 };
 
-const struct ffa_dev_ops *ffa_dev_ops_get(struct ffa_device *dev)
-{
-	if (ffa_device_is_valid(dev))
-		return &ffa_ops;
-
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(ffa_dev_ops_get);
+static const struct ffa_ops ffa_drv_ops = {
+	.info_ops = &ffa_drv_info_ops,
+	.msg_ops = &ffa_drv_msg_ops,
+	.mem_ops = &ffa_drv_mem_ops,
+};
 
 void ffa_device_match_uuid(struct ffa_device *ffa_dev, const uuid_t *uuid)
 {
 	int count, idx;
 	struct ffa_partition_info *pbuf, *tpbuf;
 
+	/*
+	 * FF-A v1.1 provides UUID for each partition as part of the discovery
+	 * API, the discovered UUID must be populated in the device's UUID and
+	 * there is no need to copy the same from the driver table.
+	 */
+	if (drv_info->version > FFA_VERSION_1_0)
+		return;
+
 	count = ffa_partition_probe(uuid, &pbuf);
 	if (count <= 0)
 		return;
@@ -671,6 +739,7 @@ void ffa_device_match_uuid(struct ffa_device *ffa_dev, const uuid_t *uuid)
 static void ffa_setup_partitions(void)
 {
 	int count, idx;
+	uuid_t uuid;
 	struct ffa_device *ffa_dev;
 	struct ffa_partition_info *pbuf, *tpbuf;
 
@@ -681,19 +750,24 @@ static void ffa_setup_partitions(void)
 	}
 
 	for (idx = 0, tpbuf = pbuf; idx < count; idx++, tpbuf++) {
-		/* Note that the &uuid_null parameter will require
+		import_uuid(&uuid, (u8 *)tpbuf->uuid);
+
+		/* Note that if the UUID will be uuid_null, that will require
 		 * ffa_device_match() to find the UUID of this partition id
-		 * with help of ffa_device_match_uuid(). Once the FF-A spec
-		 * is updated to provide correct UUID here for each partition
-		 * as part of the discovery API, we need to pass the
-		 * discovered UUID here instead.
+		 * with help of ffa_device_match_uuid(). FF-A v1.1 and above
+		 * provides UUID here for each partition as part of the
+		 * discovery API and the same is passed.
 		 */
-		ffa_dev = ffa_device_register(&uuid_null, tpbuf->id);
+		ffa_dev = ffa_device_register(&uuid, tpbuf->id, &ffa_drv_ops);
 		if (!ffa_dev) {
 			pr_err("%s: failed to register partition ID 0x%x\n",
 			       __func__, tpbuf->id);
 			continue;
 		}
+
+		if (drv_info->version > FFA_VERSION_1_0 &&
+		    !(tpbuf->properties & FFA_PARTITION_AARCH64_EXEC))
+			_ffa_mode_32bit_set(ffa_dev);
 	}
 	kfree(pbuf);
 }
@@ -751,6 +825,8 @@ static int __init ffa_init(void)
 
 	ffa_setup_partitions();
 
+	ffa_set_up_mem_ops_native_flag();
+
 	return 0;
 free_pages:
 	if (drv_info->tx_buffer)

drivers/firmware/psci/psci.c

@@ -9,6 +9,7 @@
 #include <linux/acpi.h>
 #include <linux/arm-smccc.h>
 #include <linux/cpuidle.h>
+#include <linux/debugfs.h>
 #include <linux/errno.h>
 #include <linux/linkage.h>
 #include <linux/of.h>
@@ -163,6 +164,8 @@ int psci_set_osi_mode(bool enable)
 			PSCI_1_0_SUSPEND_MODE_PC;
 
 	err = invoke_psci_fn(PSCI_1_0_FN_SET_SUSPEND_MODE, suspend_mode, 0, 0);
+	if (err < 0)
+		pr_warn("failed to set %s mode: %d\n", enable ? "OSI" : "PC", err);
 	return psci_to_linux_errno(err);
 }
 
@@ -324,12 +327,125 @@ static void psci_sys_poweroff(void)
 	invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0);
 }
 
-static int __init psci_features(u32 psci_func_id)
+static int psci_features(u32 psci_func_id)
 {
 	return invoke_psci_fn(PSCI_1_0_FN_PSCI_FEATURES,
 			      psci_func_id, 0, 0);
 }
 
+#ifdef CONFIG_DEBUG_FS
+
+#define PSCI_ID(ver, _name) \
+	{ .fn = PSCI_##ver##_FN_##_name, .name = #_name, }
+#define PSCI_ID_NATIVE(ver, _name) \
+	{ .fn = PSCI_FN_NATIVE(ver, _name), .name = #_name, }
+
+/* A table of all optional functions */
+static const struct {
+	u32 fn;
+	const char *name;
+} psci_fn_ids[] = {
+	PSCI_ID_NATIVE(0_2, MIGRATE),
+	PSCI_ID(0_2, MIGRATE_INFO_TYPE),
+	PSCI_ID_NATIVE(0_2, MIGRATE_INFO_UP_CPU),
+	PSCI_ID(1_0, CPU_FREEZE),
+	PSCI_ID_NATIVE(1_0, CPU_DEFAULT_SUSPEND),
+	PSCI_ID_NATIVE(1_0, NODE_HW_STATE),
+	PSCI_ID_NATIVE(1_0, SYSTEM_SUSPEND),
+	PSCI_ID(1_0, SET_SUSPEND_MODE),
+	PSCI_ID_NATIVE(1_0, STAT_RESIDENCY),
+	PSCI_ID_NATIVE(1_0, STAT_COUNT),
+	PSCI_ID_NATIVE(1_1, SYSTEM_RESET2),
+	PSCI_ID(1_1, MEM_PROTECT),
+	PSCI_ID_NATIVE(1_1, MEM_PROTECT_CHECK_RANGE),
+};
+
+static int psci_debugfs_read(struct seq_file *s, void *data)
+{
+	int feature, type, i;
+	u32 ver;
+
+	ver = psci_ops.get_version();
+	seq_printf(s, "PSCIv%d.%d\n",
+		   PSCI_VERSION_MAJOR(ver),
+		   PSCI_VERSION_MINOR(ver));
+
+	/* PSCI_FEATURES is available only starting from 1.0 */
+	if (PSCI_VERSION_MAJOR(ver) < 1)
+		return 0;
+
+	feature = psci_features(ARM_SMCCC_VERSION_FUNC_ID);
+	if (feature != PSCI_RET_NOT_SUPPORTED) {
+		ver = invoke_psci_fn(ARM_SMCCC_VERSION_FUNC_ID, 0, 0, 0);
+		seq_printf(s, "SMC Calling Convention v%d.%d\n",
+			   PSCI_VERSION_MAJOR(ver),
+			   PSCI_VERSION_MINOR(ver));
+	} else {
+		seq_puts(s, "SMC Calling Convention v1.0 is assumed\n");
+	}
+
+	feature = psci_features(PSCI_FN_NATIVE(0_2, CPU_SUSPEND));
+	if (feature < 0) {
+		seq_printf(s, "PSCI_FEATURES(CPU_SUSPEND) error (%d)\n", feature);
+	} else {
+		seq_printf(s, "OSI is %ssupported\n",
+			   (feature & BIT(0)) ? "" : "not ");
+		seq_printf(s, "%s StateID format is used\n",
+			   (feature & BIT(1)) ? "Extended" : "Original");
+	}
+
+	type = psci_ops.migrate_info_type();
+	if (type == PSCI_0_2_TOS_UP_MIGRATE ||
+	    type == PSCI_0_2_TOS_UP_NO_MIGRATE) {
+		unsigned long cpuid;
+
+		seq_printf(s, "Trusted OS %smigrate capable\n",
+			   type == PSCI_0_2_TOS_UP_NO_MIGRATE ? "not " : "");
+		cpuid = psci_migrate_info_up_cpu();
+		seq_printf(s, "Trusted OS resident on physical CPU 0x%lx (#%d)\n",
+			   cpuid, resident_cpu);
+	} else if (type == PSCI_0_2_TOS_MP) {
+		seq_puts(s, "Trusted OS migration not required\n");
+	} else {
+		if (type != PSCI_RET_NOT_SUPPORTED)
+			seq_printf(s, "MIGRATE_INFO_TYPE returned unknown type (%d)\n", type);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(psci_fn_ids); i++) {
+		feature = psci_features(psci_fn_ids[i].fn);
+		if (feature == PSCI_RET_NOT_SUPPORTED)
+			continue;
+		if (feature < 0)
+			seq_printf(s, "PSCI_FEATURES(%s) error (%d)\n",
+				   psci_fn_ids[i].name, feature);
+		else
+			seq_printf(s, "%s is supported\n", psci_fn_ids[i].name);
+	}
+
+	return 0;
+}
+
+static int psci_debugfs_open(struct inode *inode, struct file *f)
+{
+	return single_open(f, psci_debugfs_read, NULL);
+}
+
+static const struct file_operations psci_debugfs_ops = {
+	.owner = THIS_MODULE,
+	.open = psci_debugfs_open,
+	.release = single_release,
+	.read = seq_read,
+	.llseek = seq_lseek
+};
+
+static int __init psci_debugfs_init(void)
+{
+	return PTR_ERR_OR_ZERO(debugfs_create_file("psci", 0444, NULL, NULL,
+						   &psci_debugfs_ops));
+}
+late_initcall(psci_debugfs_init)
+#endif
+
 #ifdef CONFIG_CPU_IDLE
 static int psci_suspend_finisher(unsigned long state)
 {

drivers/firmware/qcom_scm.h

@@ -129,8 +129,6 @@ extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
 #define QCOM_SCM_SMMU_CONFIG_ERRATA1		0x03
 #define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL	0x02
 
-extern void __qcom_scm_init(void);
-
 /* common error codes */
 #define QCOM_SCM_V2_EBUSY	-12
 #define QCOM_SCM_ENOMEM		-5

drivers/firmware/tegra/bpmp-debugfs.c

@@ -377,18 +377,11 @@ static ssize_t bpmp_debug_store(struct file *file, const char __user *buf,
 	if (!filename)
 		return -ENOENT;
 
-	databuf = kmalloc(count, GFP_KERNEL);
-	if (!databuf)
-		return -ENOMEM;
-
-	if (copy_from_user(databuf, buf, count)) {
-		err = -EFAULT;
-		goto free_ret;
-	}
+	databuf = memdup_user(buf, count);
+	if (IS_ERR(databuf))
+		return PTR_ERR(databuf);
 
 	err = mrq_debug_write(bpmp, filename, databuf, count);
-
-free_ret:
 	kfree(databuf);
 
 	return err ?: count;

drivers/i2c/busses/Kconfig

@@ -488,8 +488,8 @@ config I2C_BCM_KONA
 
 config I2C_BRCMSTB
 	tristate "BRCM Settop/DSL I2C controller"
-	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
-		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || \
+		   BMIPS_GENERIC || COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the

drivers/memory/Kconfig

@@ -66,6 +66,15 @@ config BRCMSTB_DPFE
 	  for the DRAM's temperature. Slower refresh rate means cooler RAM,
 	  higher refresh rate means hotter RAM.
 
+config BRCMSTB_MEMC
+	tristate "Broadcom STB MEMC driver"
+	default ARCH_BRCMSTB
+	depends on ARCH_BRCMSTB || COMPILE_TEST
+	help
+	  This driver provides a way to configure the Broadcom STB memory
+	  controller and specifically control the Self Refresh Power Down
+	  (SRPD) inactivity timeout.
+
 config BT1_L2_CTL
 	bool "Baikal-T1 CM2 L2-RAM Cache Control Block"
 	depends on MIPS_BAIKAL_T1 || COMPILE_TEST

drivers/memory/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_ARM_PL172_MPMC)	+= pl172.o
 obj-$(CONFIG_ATMEL_SDRAMC)	+= atmel-sdramc.o
 obj-$(CONFIG_ATMEL_EBI)		+= atmel-ebi.o
 obj-$(CONFIG_BRCMSTB_DPFE)	+= brcmstb_dpfe.o
+obj-$(CONFIG_BRCMSTB_MEMC)	+= brcmstb_memc.o
 obj-$(CONFIG_BT1_L2_CTL)	+= bt1-l2-ctl.o
 obj-$(CONFIG_TI_AEMIF)		+= ti-aemif.o
 obj-$(CONFIG_TI_EMIF)		+= emif.o

drivers/memory/brcmstb_memc.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * DDR Self-Refresh Power Down (SRPD) support for Broadcom STB SoCs
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define REG_MEMC_CNTRLR_CONFIG		0x00
+#define  CNTRLR_CONFIG_LPDDR4_SHIFT	5
+#define  CNTRLR_CONFIG_MASK		0xf
+#define REG_MEMC_SRPD_CFG_21		0x20
+#define REG_MEMC_SRPD_CFG_20		0x34
+#define REG_MEMC_SRPD_CFG_1x		0x3c
+#define INACT_COUNT_SHIFT		0
+#define INACT_COUNT_MASK		0xffff
+#define SRPD_EN_SHIFT			16
+
+struct brcmstb_memc_data {
+	u32 srpd_offset;
+};
+
+struct brcmstb_memc {
+	struct device *dev;
+	void __iomem *ddr_ctrl;
+	unsigned int timeout_cycles;
+	u32 frequency;
+	u32 srpd_offset;
+};
+
+static int brcmstb_memc_uses_lpddr4(struct brcmstb_memc *memc)
+{
+	void __iomem *config = memc->ddr_ctrl + REG_MEMC_CNTRLR_CONFIG;
+	u32 reg;
+
+	reg = readl_relaxed(config) & CNTRLR_CONFIG_MASK;
+
+	return reg == CNTRLR_CONFIG_LPDDR4_SHIFT;
+}
+
+static int brcmstb_memc_srpd_config(struct brcmstb_memc *memc,
+				    unsigned int cycles)
+{
+	void __iomem *cfg = memc->ddr_ctrl + memc->srpd_offset;
+	u32 val;
+
+	/* Max timeout supported in HW */
+	if (cycles > INACT_COUNT_MASK)
+		return -EINVAL;
+
+	memc->timeout_cycles = cycles;
+
+	val = (cycles << INACT_COUNT_SHIFT) & INACT_COUNT_MASK;
+	if (cycles)
+		val |= BIT(SRPD_EN_SHIFT);
+
+	writel_relaxed(val, cfg);
+	/* Ensure the write is committed to the controller */
+	(void)readl_relaxed(cfg);
+
+	return 0;
+}
+
+static ssize_t frequency_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct brcmstb_memc *memc = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", memc->frequency);
+}
+
+static ssize_t srpd_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct brcmstb_memc *memc = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", memc->timeout_cycles);
+}
+
+static ssize_t srpd_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct brcmstb_memc *memc = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	/*
+	 * Cannot change the inactivity timeout on LPDDR4 chips because the
+	 * dynamic tuning process will also get affected by the inactivity
+	 * timeout, thus making it non functional.
+	 */
+	if (brcmstb_memc_uses_lpddr4(memc))
+		return -EOPNOTSUPP;
+
+	ret = kstrtouint(buf, 10, &val);
+	if (ret < 0)
+		return ret;
+
+	ret = brcmstb_memc_srpd_config(memc, val);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR_RO(frequency);
+static DEVICE_ATTR_RW(srpd);
+
+static struct attribute *dev_attrs[] = {
+	&dev_attr_frequency.attr,
+	&dev_attr_srpd.attr,
+	NULL,
+};
+
+static struct attribute_group dev_attr_group = {
+	.attrs = dev_attrs,
+};
+
+static const struct of_device_id brcmstb_memc_of_match[];
+
+static int brcmstb_memc_probe(struct platform_device *pdev)
+{
+	const struct brcmstb_memc_data *memc_data;
+	const struct of_device_id *of_id;
+	struct device *dev = &pdev->dev;
+	struct brcmstb_memc *memc;
+	int ret;
+
+	memc = devm_kzalloc(dev, sizeof(*memc), GFP_KERNEL);
+	if (!memc)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, memc);
+
+	of_id = of_match_device(brcmstb_memc_of_match, dev);
+	memc_data = of_id->data;
+	memc->srpd_offset = memc_data->srpd_offset;
+
+	memc->ddr_ctrl = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(memc->ddr_ctrl))
+		return PTR_ERR(memc->ddr_ctrl);
+
+	of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+			     &memc->frequency);
+
+	ret = sysfs_create_group(&dev->kobj, &dev_attr_group);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int brcmstb_memc_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	sysfs_remove_group(&dev->kobj, &dev_attr_group);
+
+	return 0;
+}
+
+enum brcmstb_memc_hwtype {
+	BRCMSTB_MEMC_V21,
+	BRCMSTB_MEMC_V20,
+	BRCMSTB_MEMC_V1X,
+};
+
+static const struct brcmstb_memc_data brcmstb_memc_versions[] = {
+	{ .srpd_offset = REG_MEMC_SRPD_CFG_21 },
+	{ .srpd_offset = REG_MEMC_SRPD_CFG_20 },
+	{ .srpd_offset = REG_MEMC_SRPD_CFG_1x },
+};
+
+static const struct of_device_id brcmstb_memc_of_match[] = {
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V1X]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.0",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V20]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.1",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.2",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.3",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.5",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.6",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.7",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.8",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.3.0",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.3.1",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-c.1.0",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-c.1.2",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-c.1.3",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-c.1.4",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	/* default to the original offset */
+	{
+		.compatible = "brcm,brcmstb-memc-ddr",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V1X]
+	},
+	{}
+};
+
+static int brcmstb_memc_suspend(struct device *dev)
+{
+	struct brcmstb_memc *memc = dev_get_drvdata(dev);
+	void __iomem *cfg = memc->ddr_ctrl + memc->srpd_offset;
+	u32 val;
+
+	if (memc->timeout_cycles == 0)
+		return 0;
+
+	/*
+	 * Disable SRPD prior to suspending the system since that can
+	 * cause issues with other memory clients managed by the ARM
+	 * trusted firmware to access memory.
+	 */
+	val = readl_relaxed(cfg);
+	val &= ~BIT(SRPD_EN_SHIFT);
+	writel_relaxed(val, cfg);
+	/* Ensure the write is committed to the controller */
+	(void)readl_relaxed(cfg);
+
+	return 0;
+}
+
+static int brcmstb_memc_resume(struct device *dev)
+{
+	struct brcmstb_memc *memc = dev_get_drvdata(dev);
+
+	if (memc->timeout_cycles == 0)
+		return 0;
+
+	return brcmstb_memc_srpd_config(memc, memc->timeout_cycles);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(brcmstb_memc_pm_ops, brcmstb_memc_suspend,
+				brcmstb_memc_resume);
+
+static struct platform_driver brcmstb_memc_driver = {
+	.probe = brcmstb_memc_probe,
+	.remove = brcmstb_memc_remove,
+	.driver = {
+		.name		= "brcmstb_memc",
+		.of_match_table	= brcmstb_memc_of_match,
+		.pm		= pm_ptr(&brcmstb_memc_pm_ops),
+	},
+};
+module_platform_driver(brcmstb_memc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("DDR SRPD driver for Broadcom STB chips");

drivers/memory/dfl-emif.c

@@ -24,11 +24,24 @@
 #define EMIF_STAT_CLEAR_BUSY_SFT	16
 #define EMIF_CTRL			0x10
 #define EMIF_CTRL_CLEAR_EN_SFT		0
-#define EMIF_CTRL_CLEAR_EN_MSK		GENMASK_ULL(3, 0)
+#define EMIF_CTRL_CLEAR_EN_MSK		GENMASK_ULL(7, 0)
 
 #define EMIF_POLL_INVL			10000 /* us */
 #define EMIF_POLL_TIMEOUT		5000000 /* us */
 
+/*
+ * The Capability Register replaces the Control Register (at the same
+ * offset) for EMIF feature revisions > 0. The bitmask that indicates
+ * the presence of memory channels exists in both the Capability Register
+ * and Control Register definitions. These can be thought of as a C union.
+ * The Capability Register definitions are used to check for the existence
+ * of a memory channel, and the Control Register definitions are used for
+ * managing the memory-clear functionality in revision 0.
+ */
+#define EMIF_CAPABILITY_BASE		0x10
+#define EMIF_CAPABILITY_CHN_MSK_V0	GENMASK_ULL(3, 0)
+#define EMIF_CAPABILITY_CHN_MSK		GENMASK_ULL(7, 0)
+
 struct dfl_emif {
 	struct device *dev;
 	void __iomem *base;
@@ -106,16 +119,30 @@ emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 0);
 emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 1);
 emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 2);
 emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 3);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 4);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 5);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 6);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 7);
 
 emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 0);
 emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 1);
 emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 2);
 emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 3);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 4);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 5);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 6);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 7);
+
 
 emif_clear_attr(0);
 emif_clear_attr(1);
 emif_clear_attr(2);
 emif_clear_attr(3);
+emif_clear_attr(4);
+emif_clear_attr(5);
+emif_clear_attr(6);
+emif_clear_attr(7);
+
 
 static struct attribute *dfl_emif_attrs[] = {
 	&emif_attr_inf0_init_done.attr.attr,
@@ -134,6 +161,22 @@ static struct attribute *dfl_emif_attrs[] = {
 	&emif_attr_inf3_cal_fail.attr.attr,
 	&emif_attr_inf3_clear.attr.attr,
 
+	&emif_attr_inf4_init_done.attr.attr,
+	&emif_attr_inf4_cal_fail.attr.attr,
+	&emif_attr_inf4_clear.attr.attr,
+
+	&emif_attr_inf5_init_done.attr.attr,
+	&emif_attr_inf5_cal_fail.attr.attr,
+	&emif_attr_inf5_clear.attr.attr,
+
+	&emif_attr_inf6_init_done.attr.attr,
+	&emif_attr_inf6_cal_fail.attr.attr,
+	&emif_attr_inf6_clear.attr.attr,
+
+	&emif_attr_inf7_init_done.attr.attr,
+	&emif_attr_inf7_cal_fail.attr.attr,
+	&emif_attr_inf7_clear.attr.attr,
+
 	NULL,
 };
 
@@ -143,15 +186,24 @@ static umode_t dfl_emif_visible(struct kobject *kobj,
 	struct dfl_emif *de = dev_get_drvdata(kobj_to_dev(kobj));
 	struct emif_attr *eattr = container_of(attr, struct emif_attr,
 					       attr.attr);
+	struct dfl_device *ddev = to_dfl_dev(de->dev);
 	u64 val;
 
 	/*
-	 * This device supports upto 4 memory interfaces, but not all
+	 * This device supports up to 8 memory interfaces, but not all
 	 * interfaces are used on different platforms. The read out value of
-	 * CLEAN_EN field (which is a bitmap) could tell how many interfaces
-	 * are available.
+	 * CAPABILITY_CHN_MSK field (which is a bitmap) indicates which
+	 * interfaces are available.
 	 */
-	val = FIELD_GET(EMIF_CTRL_CLEAR_EN_MSK, readq(de->base + EMIF_CTRL));
+	if (ddev->revision > 0 && strstr(attr->name, "_clear"))
+		return 0;
+
+	if (ddev->revision == 0)
+		val = FIELD_GET(EMIF_CAPABILITY_CHN_MSK_V0,
+				readq(de->base + EMIF_CAPABILITY_BASE));
+	else
+		val = FIELD_GET(EMIF_CAPABILITY_CHN_MSK,
+				readq(de->base + EMIF_CAPABILITY_BASE));
 
 	return (val & BIT_ULL(eattr->index)) ? attr->mode : 0;
 }

drivers/memory/mtk-smi.c

@@ -3,6 +3,7 @@
  * Copyright (c) 2015-2016 MediaTek Inc.
  * Author: Yong Wu <yong.wu@mediatek.com>
  */
+#include <linux/arm-smccc.h>
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/device.h>
@@ -14,6 +15,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/soc/mediatek/mtk_sip_svc.h>
 #include <soc/mediatek/smi.h>
 #include <dt-bindings/memory/mt2701-larb-port.h>
 #include <dt-bindings/memory/mtk-memory-port.h>
@@ -89,6 +91,7 @@
 #define MTK_SMI_FLAG_THRT_UPDATE	BIT(0)
 #define MTK_SMI_FLAG_SW_FLAG		BIT(1)
 #define MTK_SMI_FLAG_SLEEP_CTL		BIT(2)
+#define MTK_SMI_FLAG_CFG_PORT_SEC_CTL	BIT(3)
 #define MTK_SMI_CAPS(flags, _x)		(!!((flags) & (_x)))
 
 struct mtk_smi_reg_pair {
@@ -127,7 +130,7 @@ struct mtk_smi_common_plat {
 
 struct mtk_smi_larb_gen {
 	int port_in_larb[MTK_LARB_NR_MAX + 1];
-	void (*config_port)(struct device *dev);
+	int				(*config_port)(struct device *dev);
 	unsigned int			larb_direct_to_common_mask;
 	unsigned int			flags_general;
 	const u8			(*ostd)[SMI_LARB_PORT_NR_MAX];
@@ -185,7 +188,7 @@ static const struct component_ops mtk_smi_larb_component_ops = {
 	.unbind = mtk_smi_larb_unbind,
 };
 
-static void mtk_smi_larb_config_port_gen1(struct device *dev)
+static int mtk_smi_larb_config_port_gen1(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
 	const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
@@ -214,31 +217,35 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 			common->smi_ao_base
 			+ REG_SMI_SECUR_CON_ADDR(m4u_port_id));
 	}
+	return 0;
 }
 
-static void mtk_smi_larb_config_port_mt8167(struct device *dev)
+static int mtk_smi_larb_config_port_mt8167(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
 
 	writel(*larb->mmu, larb->base + MT8167_SMI_LARB_MMU_EN);
+	return 0;
 }
 
-static void mtk_smi_larb_config_port_mt8173(struct device *dev)
+static int mtk_smi_larb_config_port_mt8173(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
 
 	writel(*larb->mmu, larb->base + MT8173_SMI_LARB_MMU_EN);
+	return 0;
 }
 
-static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
+static int mtk_smi_larb_config_port_gen2_general(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
 	u32 reg, flags_general = larb->larb_gen->flags_general;
 	const u8 *larbostd = larb->larb_gen->ostd ? larb->larb_gen->ostd[larb->larbid] : NULL;
+	struct arm_smccc_res res;
 	int i;
 
 	if (BIT(larb->larbid) & larb->larb_gen->larb_direct_to_common_mask)
-		return;
+		return 0;
 
 	if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_THRT_UPDATE)) {
 		reg = readl_relaxed(larb->base + SMI_LARB_CMD_THRT_CON);
@@ -253,14 +260,78 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
 	for (i = 0; i < SMI_LARB_PORT_NR_MAX && larbostd && !!larbostd[i]; i++)
 		writel_relaxed(larbostd[i], larb->base + SMI_LARB_OSTDL_PORTx(i));
 
+	/*
+	 * When mmu_en bits are in security world, the bank_sel still is in the
+	 * LARB_NONSEC_CON below. And the mmu_en bits of LARB_NONSEC_CON have no
+	 * effect in this case.
+	 */
+	if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_CFG_PORT_SEC_CTL)) {
+		arm_smccc_smc(MTK_SIP_KERNEL_IOMMU_CONTROL, IOMMU_ATF_CMD_CONFIG_SMI_LARB,
+			      larb->larbid, *larb->mmu, 0, 0, 0, 0, &res);
+		if (res.a0 != 0) {
+			dev_err(dev, "Enable iommu fail, ret %ld\n", res.a0);
+			return -EINVAL;
+		}
+	}
+
 	for_each_set_bit(i, (unsigned long *)larb->mmu, 32) {
 		reg = readl_relaxed(larb->base + SMI_LARB_NONSEC_CON(i));
 		reg |= F_MMU_EN;
 		reg |= BANK_SEL(larb->bank[i]);
 		writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
 	}
+	return 0;
 }
 
+static const u8 mtk_smi_larb_mt8188_ostd[][SMI_LARB_PORT_NR_MAX] = {
+	[0] = {0x02, 0x18, 0x22, 0x22, 0x01, 0x02, 0x0a,},
+	[1] = {0x12, 0x02, 0x14, 0x14, 0x01, 0x18, 0x0a,},
+	[2] = {0x12, 0x12, 0x12, 0x12, 0x0a,},
+	[3] = {0x12, 0x12, 0x12, 0x12, 0x28, 0x28, 0x0a,},
+	[4] = {0x06, 0x01, 0x17, 0x06, 0x0a, 0x07, 0x07,},
+	[5] = {0x02, 0x01, 0x04, 0x02, 0x06, 0x01, 0x06, 0x0a,},
+	[6] = {0x06, 0x01, 0x06, 0x0a,},
+	[7] = {0x0c, 0x0c, 0x12,},
+	[8] = {0x0c, 0x01, 0x0a, 0x05, 0x02, 0x03, 0x01, 0x01, 0x14, 0x14,
+	       0x0a, 0x14, 0x1e, 0x01, 0x0c, 0x0a, 0x05, 0x02, 0x02, 0x05,
+	       0x03, 0x01, 0x1e, 0x01, 0x05,},
+	[9] = {0x1e, 0x01, 0x0a, 0x0a, 0x01, 0x01, 0x03, 0x1e, 0x1e, 0x10,
+	       0x07, 0x01, 0x0a, 0x06, 0x03, 0x03, 0x0e, 0x01, 0x04, 0x28,},
+	[10] = {0x03, 0x20, 0x01, 0x20, 0x01, 0x01, 0x14, 0x0a, 0x0a, 0x0c,
+		0x0a, 0x05, 0x02, 0x03, 0x02, 0x14, 0x0a, 0x0a, 0x14, 0x14,
+		0x14, 0x01, 0x01, 0x14, 0x1e, 0x01, 0x05, 0x03, 0x02, 0x28,},
+	[11] = {0x03, 0x20, 0x01, 0x20, 0x01, 0x01, 0x14, 0x0a, 0x0a, 0x0c,
+		0x0a, 0x05, 0x02, 0x03, 0x02, 0x14, 0x0a, 0x0a, 0x14, 0x14,
+		0x14, 0x01, 0x01, 0x14, 0x1e, 0x01, 0x05, 0x03, 0x02, 0x28,},
+	[12] = {0x03, 0x20, 0x01, 0x20, 0x01, 0x01, 0x14, 0x0a, 0x0a, 0x0c,
+		0x0a, 0x05, 0x02, 0x03, 0x02, 0x14, 0x0a, 0x0a, 0x14, 0x14,
+		0x14, 0x01, 0x01, 0x14, 0x1e, 0x01, 0x05, 0x03, 0x02, 0x28,},
+	[13] = {0x07, 0x02, 0x04, 0x02, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
+		0x07, 0x02, 0x04, 0x02, 0x05, 0x05,},
+	[14] = {0x02, 0x02, 0x0c, 0x0c, 0x0c, 0x0c, 0x01, 0x01, 0x02, 0x02,
+		0x02, 0x02, 0x0c, 0x0c, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
+		0x02, 0x02, 0x01, 0x01,},
+	[15] = {0x0c, 0x0c, 0x02, 0x02, 0x02, 0x02, 0x01, 0x01, 0x0c, 0x0c,
+		0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x01, 0x02,
+		0x0c, 0x01, 0x01,},
+	[16] = {0x28, 0x28, 0x03, 0x01, 0x01, 0x03, 0x14, 0x14, 0x0a, 0x0d,
+		0x03, 0x05, 0x0e, 0x01, 0x01, 0x05, 0x06, 0x0d, 0x01,},
+	[17] = {0x28, 0x02, 0x02, 0x12, 0x02, 0x12, 0x10, 0x02, 0x02, 0x0a,
+		0x12, 0x02, 0x02, 0x0a, 0x16, 0x02, 0x04,},
+	[18] = {0x28, 0x02, 0x02, 0x12, 0x02, 0x12, 0x10, 0x02, 0x02, 0x0a,
+		0x12, 0x02, 0x02, 0x0a, 0x16, 0x02, 0x04,},
+	[19] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,},
+	[20] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,},
+	[21] = {0x01, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04, 0x04, 0x01,
+		0x01, 0x01, 0x04, 0x0a, 0x06, 0x01, 0x01, 0x01, 0x0a, 0x06,
+		0x01, 0x01, 0x05, 0x03, 0x03, 0x04, 0x01,},
+	[22] = {0x28, 0x19, 0x0c, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04,
+		0x01,},
+	[23] = {0x01, 0x01, 0x04, 0x01, 0x01, 0x01, 0x18, 0x01, 0x01,},
+	[24] = {0x12, 0x06, 0x12, 0x06,},
+	[25] = {0x01},
+};
+
 static const u8 mtk_smi_larb_mt8195_ostd[][SMI_LARB_PORT_NR_MAX] = {
 	[0] = {0x0a, 0xc, 0x22, 0x22, 0x01, 0x0a,}, /* larb0 */
 	[1] = {0x0a, 0xc, 0x22, 0x22, 0x01, 0x0a,}, /* larb1 */
@@ -347,6 +418,13 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8186 = {
 	.flags_general	            = MTK_SMI_FLAG_SLEEP_CTL,
 };
 
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8188 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.flags_general	            = MTK_SMI_FLAG_THRT_UPDATE | MTK_SMI_FLAG_SW_FLAG |
+				      MTK_SMI_FLAG_SLEEP_CTL | MTK_SMI_FLAG_CFG_PORT_SEC_CTL,
+	.ostd		            = mtk_smi_larb_mt8188_ostd,
+};
+
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
 };
@@ -367,6 +445,7 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173},
 	{.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183},
 	{.compatible = "mediatek,mt8186-smi-larb", .data = &mtk_smi_larb_mt8186},
+	{.compatible = "mediatek,mt8188-smi-larb", .data = &mtk_smi_larb_mt8188},
 	{.compatible = "mediatek,mt8192-smi-larb", .data = &mtk_smi_larb_mt8192},
 	{.compatible = "mediatek,mt8195-smi-larb", .data = &mtk_smi_larb_mt8195},
 	{}
@@ -511,9 +590,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 		mtk_smi_larb_sleep_ctrl_disable(larb);
 
 	/* Configure the basic setting for this larb */
-	larb_gen->config_port(dev);
-
-	return 0;
+	return larb_gen->config_port(dev);
 }
 
 static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
@@ -597,6 +674,18 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8186 = {
 	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(4) | F_MMU1_LARB(7),
 };
 
+static const struct mtk_smi_common_plat mtk_smi_common_mt8188_vdo = {
+	.type     = MTK_SMI_GEN2,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(5) | F_MMU1_LARB(7),
+	.init     = mtk_smi_common_mt8195_init,
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt8188_vpp = {
+	.type     = MTK_SMI_GEN2,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(7),
+	.init     = mtk_smi_common_mt8195_init,
+};
+
 static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
 	.type     = MTK_SMI_GEN2,
 	.has_gals = true,
@@ -633,6 +722,8 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
 	{.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2},
 	{.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183},
 	{.compatible = "mediatek,mt8186-smi-common", .data = &mtk_smi_common_mt8186},
+	{.compatible = "mediatek,mt8188-smi-common-vdo", .data = &mtk_smi_common_mt8188_vdo},
+	{.compatible = "mediatek,mt8188-smi-common-vpp", .data = &mtk_smi_common_mt8188_vpp},
 	{.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192},
 	{.compatible = "mediatek,mt8195-smi-common-vdo", .data = &mtk_smi_common_mt8195_vdo},
 	{.compatible = "mediatek,mt8195-smi-common-vpp", .data = &mtk_smi_common_mt8195_vpp},

drivers/memory/of_memory.c

@@ -134,6 +134,7 @@ const struct lpddr2_timings *of_get_ddr_timings(struct device_node *np_ddr,
 	for_each_child_of_node(np_ddr, np_tim) {
 		if (of_device_is_compatible(np_tim, tim_compat)) {
 			if (of_do_get_timings(np_tim, &timings[i])) {
+				of_node_put(np_tim);
 				devm_kfree(dev, timings);
 				goto default_timings;
 			}
@@ -284,6 +285,7 @@ const struct lpddr3_timings
 		if (of_device_is_compatible(np_tim, tim_compat)) {
 			if (of_lpddr3_do_get_timings(np_tim, &timings[i])) {
 				devm_kfree(dev, timings);
+				of_node_put(np_tim);
 				goto default_timings;
 			}
 			i++;

drivers/memory/pl353-smc.c

@@ -122,6 +122,7 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
 	}
 
 	of_platform_device_create(child, NULL, &adev->dev);
+	of_node_put(child);
 
 	return 0;
 

drivers/mtd/parsers/Kconfig

@@ -69,8 +69,8 @@ config MTD_OF_PARTS
 
 config MTD_OF_PARTS_BCM4908
 	bool "BCM4908 partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
-	default ARCH_BCM4908
+	depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
+	default ARCH_BCMBCA
 	help
 	  This provides partitions parser for BCM4908 family devices
 	  that can have multiple "firmware" partitions. It takes care of
@@ -78,7 +78,7 @@ config MTD_OF_PARTS_BCM4908
 
 config MTD_OF_PARTS_LINKSYS_NS
 	bool "Linksys Northstar partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
+	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
 	default ARCH_BCM_5301X
 	help
 	  This provides partitions parser for Linksys devices based on Broadcom

drivers/net/ethernet/broadcom/Kconfig

@@ -53,8 +53,8 @@ config B44_PCI
 
 config BCM4908_ENET
 	tristate "Broadcom BCM4908 internal mac support"
-	depends on ARCH_BCM4908 || COMPILE_TEST
-	default y if ARCH_BCM4908
+	depends on ARCH_BCMBCA || COMPILE_TEST
+	default y if ARCH_BCMBCA
 	help
 	  This driver supports Ethernet controller integrated into Broadcom
 	  BCM4908 family SoCs.

drivers/pci/controller/Kconfig

@@ -274,7 +274,7 @@ config VMD
 
 config PCIE_BRCMSTB
 	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || \
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
 		   BMIPS_GENERIC || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN

drivers/phy/broadcom/Kconfig

@@ -93,11 +93,11 @@ config PHY_BRCM_SATA
 
 config PHY_BRCM_USB
 	tristate "Broadcom STB USB PHY driver"
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
 	select SOC_BRCMSTB if ARCH_BRCMSTB
-	default ARCH_BCM4908 || ARCH_BRCMSTB
+	default ARCH_BCMBCA || ARCH_BRCMSTB
 	help
 	  Enable this to support the Broadcom STB USB PHY.
 	  This driver is required by the USB XHCI, EHCI and OHCI

drivers/pinctrl/bcm/Kconfig

@@ -31,13 +31,13 @@ config PINCTRL_BCM2835
 
 config PINCTRL_BCM4908
 	tristate "Broadcom BCM4908 pinmux driver"
-	depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
+	depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
 	select PINMUX
 	select PINCONF
 	select GENERIC_PINCONF
 	select GENERIC_PINCTRL_GROUPS
 	select GENERIC_PINMUX_FUNCTIONS
-	default ARCH_BCM4908
+	default ARCH_BCMBCA
 	help
 	  Driver for BCM4908 family SoCs with integrated pin controller.
 

drivers/reset/Kconfig

@@ -201,7 +201,7 @@ config RESET_SCMI
 
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
-	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
 	depends on HAS_IOMEM
 	help
 	  This enables a simple reset controller driver for reset lines that

drivers/soc/amlogic/meson-ee-pwrc.c

@@ -469,6 +469,7 @@ static int meson_ee_pwrc_probe(struct platform_device *pdev)
 {
 	const struct meson_ee_pwrc_domain_data *match;
 	struct regmap *regmap_ao, *regmap_hhi;
+	struct device_node *parent_np;
 	struct meson_ee_pwrc *pwrc;
 	int i, ret;
 
@@ -495,7 +496,9 @@ static int meson_ee_pwrc_probe(struct platform_device *pdev)
 
 	pwrc->xlate.num_domains = match->count;
 
-	regmap_hhi = syscon_node_to_regmap(of_get_parent(pdev->dev.of_node));
+	parent_np = of_get_parent(pdev->dev.of_node);
+	regmap_hhi = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap_hhi)) {
 		dev_err(&pdev->dev, "failed to get HHI regmap\n");
 		return PTR_ERR(regmap_hhi);

drivers/soc/amlogic/meson-gx-pwrc-vpu.c

@@ -273,6 +273,7 @@ static int meson_gx_pwrc_vpu_probe(struct platform_device *pdev)
 	const struct meson_gx_pwrc_vpu *vpu_pd_match;
 	struct regmap *regmap_ao, *regmap_hhi;
 	struct meson_gx_pwrc_vpu *vpu_pd;
+	struct device_node *parent_np;
 	struct reset_control *rstc;
 	struct clk *vpu_clk;
 	struct clk *vapb_clk;
@@ -291,7 +292,9 @@ static int meson_gx_pwrc_vpu_probe(struct platform_device *pdev)
 
 	memcpy(vpu_pd, vpu_pd_match, sizeof(*vpu_pd));
 
-	regmap_ao = syscon_node_to_regmap(of_get_parent(pdev->dev.of_node));
+	parent_np = of_get_parent(pdev->dev.of_node);
+	regmap_ao = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap_ao)) {
 		dev_err(&pdev->dev, "failed to get regmap\n");
 		return PTR_ERR(regmap_ao);

drivers/soc/apple/rtkit.c

@@ -660,6 +660,12 @@ int apple_rtkit_send_message_wait(struct apple_rtkit *rtk, u8 ep, u64 message,
 }
 EXPORT_SYMBOL_GPL(apple_rtkit_send_message_wait);
 
+int apple_rtkit_poll(struct apple_rtkit *rtk)
+{
+	return mbox_client_peek_data(rtk->mbox_chan);
+}
+EXPORT_SYMBOL_GPL(apple_rtkit_poll);
+
 int apple_rtkit_start_ep(struct apple_rtkit *rtk, u8 endpoint)
 {
 	u64 msg;

drivers/soc/bcm/bcm63xx/Kconfig

@@ -13,8 +13,8 @@ endif # SOC_BCM63XX
 
 config BCM_PMB
 	bool "Broadcom PMB (Power Management Bus) driver"
-	depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
-	default ARCH_BCM4908
+	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
+	default ARCH_BCMBCA
 	select PM_GENERIC_DOMAINS if PM
 	help
 	  This enables support for the Broadcom's PMB (Power Management Bus) that

drivers/soc/bcm/brcmstb/pm/pm-arm.c

@@ -25,7 +25,6 @@
 #include <linux/kernel.h>
 #include <linux/memblock.h>
 #include <linux/module.h>
-#include <linux/notifier.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/panic_notifier.h>
@@ -664,7 +663,20 @@ static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches,
 
 	return of_io_request_and_map(dn, index, dn->full_name);
 }
-
+/*
+ * The AON is a small domain in the SoC that can retain its state across
+ * various system wide sleep states and specific reset conditions; the
+ * AON DATA RAM is a small RAM of a few words (< 1KB) which can store
+ * persistent information across such events.
+ *
+ * The purpose of the below panic notifier is to help with notifying
+ * the bootloader that a panic occurred and so that it should try its
+ * best to preserve the DRAM contents holding that buffer for recovery
+ * by the kernel as opposed to wiping out DRAM clean again.
+ *
+ * Reference: comment from Florian Fainelli, at
+ * https://lore.kernel.org/lkml/781cafb0-8d06-8b56-907a-5175c2da196a@gmail.com
+ */
 static int brcmstb_pm_panic_notify(struct notifier_block *nb,
 		unsigned long action, void *data)
 {

drivers/soc/imx/Kconfig

@@ -20,4 +20,12 @@ config SOC_IMX8M
 	  support, it will provide the SoC info like SoC family,
 	  ID and revision etc.
 
+config SOC_IMX9
+	tristate "i.MX9 SoC family support"
+	depends on ARCH_MXC || COMPILE_TEST
+	default ARCH_MXC && ARM64
+	select SOC_BUS
+	help
+	  If you say yes here, you get support for the NXP i.MX9 family
+
 endmenu

drivers/soc/imx/Makefile

@@ -7,3 +7,5 @@ obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
 obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
 obj-$(CONFIG_SOC_IMX8M) += imx8m-blk-ctrl.o
 obj-$(CONFIG_SOC_IMX8M) += imx8mp-blk-ctrl.o
+obj-$(CONFIG_SOC_IMX9) += imx93-src.o imx93-pd.o
+obj-$(CONFIG_SOC_IMX9) += imx93-blk-ctrl.o

drivers/soc/imx/imx8m-blk-ctrl.c

@@ -5,6 +5,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/interconnect.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
@@ -37,6 +38,8 @@ struct imx8m_blk_ctrl_domain_data {
 	const char *name;
 	const char * const *clk_names;
 	int num_clks;
+	const char * const *path_names;
+	int num_paths;
 	const char *gpc_name;
 	u32 rst_mask;
 	u32 clk_mask;
@@ -52,13 +55,16 @@ struct imx8m_blk_ctrl_domain_data {
 };
 
 #define DOMAIN_MAX_CLKS 4
+#define DOMAIN_MAX_PATHS 4
 
 struct imx8m_blk_ctrl_domain {
 	struct generic_pm_domain genpd;
 	const struct imx8m_blk_ctrl_domain_data *data;
 	struct clk_bulk_data clks[DOMAIN_MAX_CLKS];
+	struct icc_bulk_data paths[DOMAIN_MAX_PATHS];
 	struct device *power_dev;
 	struct imx8m_blk_ctrl *bc;
+	int num_paths;
 };
 
 struct imx8m_blk_ctrl_data {
@@ -117,6 +123,10 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
 	if (data->mipi_phy_rst_mask)
 		regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
 
+	ret = icc_bulk_set_bw(domain->num_paths, domain->paths);
+	if (ret)
+		dev_err(bc->dev, "failed to set icc bw\n");
+
 	/* disable upstream clocks */
 	clk_bulk_disable_unprepare(data->num_clks, domain->clks);
 
@@ -152,19 +162,6 @@ static int imx8m_blk_ctrl_power_off(struct generic_pm_domain *genpd)
 	return 0;
 }
 
-static struct generic_pm_domain *
-imx8m_blk_ctrl_xlate(struct of_phandle_args *args, void *data)
-{
-	struct genpd_onecell_data *onecell_data = data;
-	unsigned int index = args->args[0];
-
-	if (args->args_count != 1 ||
-	    index >= onecell_data->num_domains)
-		return ERR_PTR(-EINVAL);
-
-	return onecell_data->domains[index];
-}
-
 static struct lock_class_key blk_ctrl_genpd_lock_class;
 
 static int imx8m_blk_ctrl_probe(struct platform_device *pdev)
@@ -206,7 +203,6 @@ static int imx8m_blk_ctrl_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	bc->onecell_data.num_domains = bc_data->num_domains;
-	bc->onecell_data.xlate = imx8m_blk_ctrl_xlate;
 	bc->onecell_data.domains =
 		devm_kcalloc(dev, bc_data->num_domains,
 			     sizeof(struct generic_pm_domain *), GFP_KERNEL);
@@ -224,10 +220,29 @@ static int imx8m_blk_ctrl_probe(struct platform_device *pdev)
 		int j;
 
 		domain->data = data;
+		domain->num_paths = data->num_paths;
 
 		for (j = 0; j < data->num_clks; j++)
 			domain->clks[j].id = data->clk_names[j];
 
+		for (j = 0; j < data->num_paths; j++) {
+			domain->paths[j].name = data->path_names[j];
+			/* Fake value for now, just let ICC could configure NoC mode/priority */
+			domain->paths[j].avg_bw = 1;
+			domain->paths[j].peak_bw = 1;
+		}
+
+		ret = devm_of_icc_bulk_get(dev, data->num_paths, domain->paths);
+		if (ret) {
+			if (ret != -EPROBE_DEFER) {
+				dev_warn_once(dev, "Could not get interconnect paths, NoC will stay unconfigured!\n");
+				domain->num_paths = 0;
+			} else {
+				dev_err_probe(dev, ret, "failed to get noc entries\n");
+				goto cleanup_pds;
+			}
+		}
+
 		ret = devm_clk_bulk_get(dev, data->num_clks, domain->clks);
 		if (ret) {
 			dev_err_probe(dev, ret, "failed to get clock\n");
@@ -454,6 +469,46 @@ static const struct imx8m_blk_ctrl_data imx8mm_vpu_blk_ctl_dev_data = {
 	.num_domains = ARRAY_SIZE(imx8mm_vpu_blk_ctl_domain_data),
 };
 
+static const struct imx8m_blk_ctrl_domain_data imx8mp_vpu_blk_ctl_domain_data[] = {
+	[IMX8MP_VPUBLK_PD_G1] = {
+		.name = "vpublk-g1",
+		.clk_names = (const char *[]){ "g1", },
+		.num_clks = 1,
+		.gpc_name = "g1",
+		.rst_mask = BIT(1),
+		.clk_mask = BIT(1),
+		.path_names = (const char *[]){"g1"},
+		.num_paths = 1,
+	},
+	[IMX8MP_VPUBLK_PD_G2] = {
+		.name = "vpublk-g2",
+		.clk_names = (const char *[]){ "g2", },
+		.num_clks = 1,
+		.gpc_name = "g2",
+		.rst_mask = BIT(0),
+		.clk_mask = BIT(0),
+		.path_names = (const char *[]){"g2"},
+		.num_paths = 1,
+	},
+	[IMX8MP_VPUBLK_PD_VC8000E] = {
+		.name = "vpublk-vc8000e",
+		.clk_names = (const char *[]){ "vc8000e", },
+		.num_clks = 1,
+		.gpc_name = "vc8000e",
+		.rst_mask = BIT(2),
+		.clk_mask = BIT(2),
+		.path_names = (const char *[]){"vc8000e"},
+		.num_paths = 1,
+	},
+};
+
+static const struct imx8m_blk_ctrl_data imx8mp_vpu_blk_ctl_dev_data = {
+	.max_reg = 0x18,
+	.power_notifier_fn = imx8mm_vpu_power_notifier,
+	.domains = imx8mp_vpu_blk_ctl_domain_data,
+	.num_domains = ARRAY_SIZE(imx8mp_vpu_blk_ctl_domain_data),
+};
+
 static int imx8mm_disp_power_notifier(struct notifier_block *nb,
 				      unsigned long action, void *data)
 {
@@ -649,6 +704,8 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[
 		.gpc_name = "lcdif1",
 		.rst_mask = BIT(4) | BIT(5) | BIT(23),
 		.clk_mask = BIT(4) | BIT(5) | BIT(23),
+		.path_names = (const char *[]){"lcdif-rd", "lcdif-wr"},
+		.num_paths = 2,
 	},
 	[IMX8MP_MEDIABLK_PD_ISI] = {
 		.name = "mediablk-isi",
@@ -657,6 +714,8 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[
 		.gpc_name = "isi",
 		.rst_mask = BIT(6) | BIT(7),
 		.clk_mask = BIT(6) | BIT(7),
+		.path_names = (const char *[]){"isi0", "isi1", "isi2"},
+		.num_paths = 3,
 	},
 	[IMX8MP_MEDIABLK_PD_MIPI_CSI2_2] = {
 		.name = "mediablk-mipi-csi2-2",
@@ -674,6 +733,8 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[
 		.gpc_name = "lcdif2",
 		.rst_mask = BIT(11) | BIT(12) | BIT(24),
 		.clk_mask = BIT(11) | BIT(12) | BIT(24),
+		.path_names = (const char *[]){"lcdif-rd", "lcdif-wr"},
+		.num_paths = 2,
 	},
 	[IMX8MP_MEDIABLK_PD_ISP] = {
 		.name = "mediablk-isp",
@@ -682,6 +743,8 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[
 		.gpc_name = "isp",
 		.rst_mask = BIT(16) | BIT(17) | BIT(18),
 		.clk_mask = BIT(16) | BIT(17) | BIT(18),
+		.path_names = (const char *[]){"isp0", "isp1"},
+		.num_paths = 2,
 	},
 	[IMX8MP_MEDIABLK_PD_DWE] = {
 		.name = "mediablk-dwe",
@@ -690,6 +753,8 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[
 		.gpc_name = "dwe",
 		.rst_mask = BIT(19) | BIT(20) | BIT(21),
 		.clk_mask = BIT(19) | BIT(20) | BIT(21),
+		.path_names = (const char *[]){"dwe"},
+		.num_paths = 1,
 	},
 	[IMX8MP_MEDIABLK_PD_MIPI_DSI_2] = {
 		.name = "mediablk-mipi-dsi-2",
@@ -787,6 +852,9 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
 	}, {
 		.compatible = "fsl,imx8mq-vpu-blk-ctrl",
 		.data = &imx8mq_vpu_blk_ctl_dev_data
+	}, {
+		.compatible = "fsl,imx8mp-vpu-blk-ctrl",
+		.data = &imx8mp_vpu_blk_ctl_dev_data
 	}, {
 		/* Sentinel */
 	}

drivers/soc/imx/imx8mp-blk-ctrl.c

@@ -6,6 +6,7 @@
 
 #include <linux/clk.h>
 #include <linux/device.h>
+#include <linux/interconnect.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
@@ -18,6 +19,8 @@
 #define GPR_REG0		0x0
 #define  PCIE_CLOCK_MODULE_EN	BIT(0)
 #define  USB_CLOCK_MODULE_EN	BIT(1)
+#define  PCIE_PHY_APB_RST	BIT(4)
+#define  PCIE_PHY_INIT_RST	BIT(5)
 
 struct imx8mp_blk_ctrl_domain;
 
@@ -36,17 +39,22 @@ struct imx8mp_blk_ctrl_domain_data {
 	const char *name;
 	const char * const *clk_names;
 	int num_clks;
+	const char * const *path_names;
+	int num_paths;
 	const char *gpc_name;
 };
 
 #define DOMAIN_MAX_CLKS 2
+#define DOMAIN_MAX_PATHS 3
 
 struct imx8mp_blk_ctrl_domain {
 	struct generic_pm_domain genpd;
 	const struct imx8mp_blk_ctrl_domain_data *data;
 	struct clk_bulk_data clks[DOMAIN_MAX_CLKS];
+	struct icc_bulk_data paths[DOMAIN_MAX_PATHS];
 	struct device *power_dev;
 	struct imx8mp_blk_ctrl *bc;
+	int num_paths;
 	int id;
 };
 
@@ -75,6 +83,10 @@ static void imx8mp_hsio_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
 	case IMX8MP_HSIOBLK_PD_PCIE:
 		regmap_set_bits(bc->regmap, GPR_REG0, PCIE_CLOCK_MODULE_EN);
 		break;
+	case IMX8MP_HSIOBLK_PD_PCIE_PHY:
+		regmap_set_bits(bc->regmap, GPR_REG0,
+				PCIE_PHY_APB_RST | PCIE_PHY_INIT_RST);
+		break;
 	default:
 		break;
 	}
@@ -90,6 +102,10 @@ static void imx8mp_hsio_blk_ctrl_power_off(struct imx8mp_blk_ctrl *bc,
 	case IMX8MP_HSIOBLK_PD_PCIE:
 		regmap_clear_bits(bc->regmap, GPR_REG0, PCIE_CLOCK_MODULE_EN);
 		break;
+	case IMX8MP_HSIOBLK_PD_PCIE_PHY:
+		regmap_clear_bits(bc->regmap, GPR_REG0,
+				  PCIE_PHY_APB_RST | PCIE_PHY_INIT_RST);
+		break;
 	default:
 		break;
 	}
@@ -144,6 +160,8 @@ static const struct imx8mp_blk_ctrl_domain_data imx8mp_hsio_domain_data[] = {
 		.clk_names = (const char *[]){ "usb" },
 		.num_clks = 1,
 		.gpc_name = "usb",
+		.path_names = (const char *[]){"usb1", "usb2"},
+		.num_paths = 2,
 	},
 	[IMX8MP_HSIOBLK_PD_USB_PHY1] = {
 		.name = "hsioblk-usb-phy1",
@@ -158,6 +176,8 @@ static const struct imx8mp_blk_ctrl_domain_data imx8mp_hsio_domain_data[] = {
 		.clk_names = (const char *[]){ "pcie" },
 		.num_clks = 1,
 		.gpc_name = "pcie",
+		.path_names = (const char *[]){"noc-pcie", "pcie"},
+		.num_paths = 2,
 	},
 	[IMX8MP_HSIOBLK_PD_PCIE_PHY] = {
 		.name = "hsioblk-pcie-phy",
@@ -225,6 +245,13 @@ static void imx8mp_hdmi_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
 		regmap_set_bits(bc->regmap, HDMI_RTX_RESET_CTL0, BIT(12));
 		regmap_clear_bits(bc->regmap, HDMI_TX_CONTROL0, BIT(3));
 		break;
+	case IMX8MP_HDMIBLK_PD_HDCP:
+		regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL0, BIT(11));
+		break;
+	case IMX8MP_HDMIBLK_PD_HRV:
+		regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(3) | BIT(4) | BIT(5));
+		regmap_set_bits(bc->regmap, HDMI_RTX_RESET_CTL0, BIT(15));
+		break;
 	default:
 		break;
 	}
@@ -273,6 +300,13 @@ static void imx8mp_hdmi_blk_ctrl_power_off(struct imx8mp_blk_ctrl *bc,
 		regmap_clear_bits(bc->regmap, HDMI_RTX_RESET_CTL0, BIT(12));
 		regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(22) | BIT(24));
 		break;
+	case IMX8MP_HDMIBLK_PD_HDCP:
+		regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL0, BIT(11));
+		break;
+	case IMX8MP_HDMIBLK_PD_HRV:
+		regmap_clear_bits(bc->regmap, HDMI_RTX_RESET_CTL0, BIT(15));
+		regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(3) | BIT(4) | BIT(5));
+		break;
 	default:
 		break;
 	}
@@ -322,6 +356,8 @@ static const struct imx8mp_blk_ctrl_domain_data imx8mp_hdmi_domain_data[] = {
 		.clk_names = (const char *[]){ "axi", "apb" },
 		.num_clks = 2,
 		.gpc_name = "lcdif",
+		.path_names = (const char *[]){"lcdif-hdmi"},
+		.num_paths = 1,
 	},
 	[IMX8MP_HDMIBLK_PD_PAI] = {
 		.name = "hdmiblk-pai",
@@ -353,6 +389,22 @@ static const struct imx8mp_blk_ctrl_domain_data imx8mp_hdmi_domain_data[] = {
 		.num_clks = 2,
 		.gpc_name = "hdmi-tx-phy",
 	},
+	[IMX8MP_HDMIBLK_PD_HRV] = {
+		.name = "hdmiblk-hrv",
+		.clk_names = (const char *[]){ "axi", "apb" },
+		.num_clks = 2,
+		.gpc_name = "hrv",
+		.path_names = (const char *[]){"hrv"},
+		.num_paths = 1,
+	},
+	[IMX8MP_HDMIBLK_PD_HDCP] = {
+		.name = "hdmiblk-hdcp",
+		.clk_names = (const char *[]){ "axi", "apb" },
+		.num_clks = 2,
+		.gpc_name = "hdcp",
+		.path_names = (const char *[]){"hdcp"},
+		.num_paths = 1,
+	},
 };
 
 static const struct imx8mp_blk_ctrl_data imx8mp_hdmi_blk_ctl_dev_data = {
@@ -395,6 +447,10 @@ static int imx8mp_blk_ctrl_power_on(struct generic_pm_domain *genpd)
 		goto clk_disable;
 	}
 
+	ret = icc_bulk_set_bw(domain->num_paths, domain->paths);
+	if (ret)
+		dev_err(bc->dev, "failed to set icc bw\n");
+
 	clk_bulk_disable_unprepare(data->num_clks, domain->clks);
 
 	return 0;
@@ -434,19 +490,6 @@ static int imx8mp_blk_ctrl_power_off(struct generic_pm_domain *genpd)
 	return 0;
 }
 
-static struct generic_pm_domain *
-imx8m_blk_ctrl_xlate(struct of_phandle_args *args, void *data)
-{
-	struct genpd_onecell_data *onecell_data = data;
-	unsigned int index = args->args[0];
-
-	if (args->args_count != 1 ||
-	    index >= onecell_data->num_domains)
-		return ERR_PTR(-EINVAL);
-
-	return onecell_data->domains[index];
-}
-
 static struct lock_class_key blk_ctrl_genpd_lock_class;
 
 static int imx8mp_blk_ctrl_probe(struct platform_device *pdev)
@@ -489,7 +532,6 @@ static int imx8mp_blk_ctrl_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	bc->onecell_data.num_domains = num_domains;
-	bc->onecell_data.xlate = imx8m_blk_ctrl_xlate;
 	bc->onecell_data.domains =
 		devm_kcalloc(dev, num_domains,
 			     sizeof(struct generic_pm_domain *), GFP_KERNEL);
@@ -510,10 +552,29 @@ static int imx8mp_blk_ctrl_probe(struct platform_device *pdev)
 		int j;
 
 		domain->data = data;
+		domain->num_paths = data->num_paths;
 
 		for (j = 0; j < data->num_clks; j++)
 			domain->clks[j].id = data->clk_names[j];
 
+		for (j = 0; j < data->num_paths; j++) {
+			domain->paths[j].name = data->path_names[j];
+			/* Fake value for now, just let ICC could configure NoC mode/priority */
+			domain->paths[j].avg_bw = 1;
+			domain->paths[j].peak_bw = 1;
+		}
+
+		ret = devm_of_icc_bulk_get(dev, data->num_paths, domain->paths);
+		if (ret) {
+			if (ret != -EPROBE_DEFER) {
+				dev_warn_once(dev, "Could not get interconnect paths, NoC will stay unconfigured!\n");
+				domain->num_paths = 0;
+			} else {
+				dev_err_probe(dev, ret, "failed to get noc entries\n");
+				goto cleanup_pds;
+			}
+		}
+
 		ret = devm_clk_bulk_get(dev, data->num_clks, domain->clks);
 		if (ret) {
 			dev_err_probe(dev, ret, "failed to get clock\n");

drivers/soc/imx/imx93-pd.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+
+#define MIX_SLICE_SW_CTRL_OFF		0x20
+#define SLICE_SW_CTRL_PSW_CTRL_OFF_MASK	BIT(4)
+#define SLICE_SW_CTRL_PDN_SOFT_MASK	BIT(31)
+
+#define MIX_FUNC_STAT_OFF		0xB4
+
+#define FUNC_STAT_PSW_STAT_MASK		BIT(0)
+#define FUNC_STAT_RST_STAT_MASK		BIT(2)
+#define FUNC_STAT_ISO_STAT_MASK		BIT(4)
+
+struct imx93_power_domain {
+	struct generic_pm_domain genpd;
+	struct device *dev;
+	void __iomem *addr;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	bool init_off;
+};
+
+#define to_imx93_pd(_genpd) container_of(_genpd, struct imx93_power_domain, genpd)
+
+static int imx93_pd_on(struct generic_pm_domain *genpd)
+{
+	struct imx93_power_domain *domain = to_imx93_pd(genpd);
+	void __iomem *addr = domain->addr;
+	u32 val;
+	int ret;
+
+	ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
+	if (ret) {
+		dev_err(domain->dev, "failed to enable clocks for domain: %s\n", genpd->name);
+		return ret;
+	}
+
+	val = readl(addr + MIX_SLICE_SW_CTRL_OFF);
+	val &= ~SLICE_SW_CTRL_PDN_SOFT_MASK;
+	writel(val, addr + MIX_SLICE_SW_CTRL_OFF);
+
+	ret = readl_poll_timeout(addr + MIX_FUNC_STAT_OFF, val,
+				 !(val & FUNC_STAT_ISO_STAT_MASK), 1, 10000);
+	if (ret) {
+		dev_err(domain->dev, "pd_on timeout: name: %s, stat: %x\n", genpd->name, val);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int imx93_pd_off(struct generic_pm_domain *genpd)
+{
+	struct imx93_power_domain *domain = to_imx93_pd(genpd);
+	void __iomem *addr = domain->addr;
+	int ret;
+	u32 val;
+
+	/* Power off MIX */
+	val = readl(addr + MIX_SLICE_SW_CTRL_OFF);
+	val |= SLICE_SW_CTRL_PDN_SOFT_MASK;
+	writel(val, addr + MIX_SLICE_SW_CTRL_OFF);
+
+	ret = readl_poll_timeout(addr + MIX_FUNC_STAT_OFF, val,
+				 val & FUNC_STAT_PSW_STAT_MASK, 1, 1000);
+	if (ret) {
+		dev_err(domain->dev, "pd_off timeout: name: %s, stat: %x\n", genpd->name, val);
+		return ret;
+	}
+
+	clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
+
+	return 0;
+};
+
+static int imx93_pd_remove(struct platform_device *pdev)
+{
+	struct imx93_power_domain *domain = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+
+	if (!domain->init_off)
+		clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
+
+	of_genpd_del_provider(np);
+	pm_genpd_remove(&domain->genpd);
+
+	return 0;
+}
+
+static int imx93_pd_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct imx93_power_domain *domain;
+	int ret;
+
+	domain = devm_kzalloc(dev, sizeof(*domain), GFP_KERNEL);
+	if (!domain)
+		return -ENOMEM;
+
+	domain->addr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(domain->addr))
+		return PTR_ERR(domain->addr);
+
+	domain->num_clks = devm_clk_bulk_get_all(dev, &domain->clks);
+	if (domain->num_clks < 0)
+		return dev_err_probe(dev, domain->num_clks, "Failed to get domain's clocks\n");
+
+	domain->genpd.name = dev_name(dev);
+	domain->genpd.power_off = imx93_pd_off;
+	domain->genpd.power_on = imx93_pd_on;
+	domain->dev = dev;
+
+	domain->init_off = readl(domain->addr + MIX_FUNC_STAT_OFF) & FUNC_STAT_ISO_STAT_MASK;
+	/* Just to sync the status of hardware */
+	if (!domain->init_off) {
+		ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
+		if (ret) {
+			dev_err(domain->dev, "failed to enable clocks for domain: %s\n",
+				domain->genpd.name);
+			return ret;
+		}
+	}
+
+	ret = pm_genpd_init(&domain->genpd, NULL, domain->init_off);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, domain);
+
+	return of_genpd_add_provider_simple(np, &domain->genpd);
+}
+
+static const struct of_device_id imx93_pd_ids[] = {
+	{ .compatible = "fsl,imx93-src-slice" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, imx93_pd_ids);
+
+static struct platform_driver imx93_power_domain_driver = {
+	.driver = {
+		.name	= "imx93_power_domain",
+		.owner	= THIS_MODULE,
+		.of_match_table = imx93_pd_ids,
+	},
+	.probe = imx93_pd_probe,
+	.remove = imx93_pd_remove,
+};
+module_platform_driver(imx93_power_domain_driver);
+
+MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX93 power domain driver");
+MODULE_LICENSE("GPL");

drivers/soc/imx/imx93-src.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 NXP
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+static int imx93_src_probe(struct platform_device *pdev)
+{
+	return devm_of_platform_populate(&pdev->dev);
+}
+
+static const struct of_device_id imx93_src_ids[] = {
+	{ .compatible = "fsl,imx93-src" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, imx93_src_ids);
+
+static struct platform_driver imx93_src_driver = {
+	.driver = {
+		.name	= "imx93_src",
+		.owner	= THIS_MODULE,
+		.of_match_table = imx93_src_ids,
+	},
+	.probe = imx93_src_probe,
+};
+module_platform_driver(imx93_src_driver);
+
+MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX93 src driver");
+MODULE_LICENSE("GPL");

drivers/soc/mediatek/Kconfig

@@ -37,6 +37,7 @@ config MTK_INFRACFG
 config MTK_PMIC_WRAP
 	tristate "MediaTek PMIC Wrapper Support"
 	depends on RESET_CONTROLLER
+	depends on OF
 	select REGMAP
 	help
 	  Say yes here to add support for MediaTek PMIC Wrapper found
@@ -46,6 +47,7 @@ config MTK_PMIC_WRAP
 config MTK_SCPSYS
 	bool "MediaTek SCPSYS Support"
 	default ARCH_MEDIATEK
+	depends on OF
 	select REGMAP
 	select MTK_INFRACFG
 	select PM_GENERIC_DOMAINS if PM

drivers/soc/mediatek/mt8186-mmsys.h

@@ -3,6 +3,12 @@
 #ifndef __SOC_MEDIATEK_MT8186_MMSYS_H
 #define __SOC_MEDIATEK_MT8186_MMSYS_H
 
+/* Values for DPI configuration in MMSYS address space */
+#define MT8186_MMSYS_DPI_OUTPUT_FORMAT		0x400
+#define DPI_FORMAT_MASK					0x1
+#define DPI_RGB888_DDR_CON				BIT(0)
+#define DPI_RGB565_SDR_CON				BIT(1)
+
 #define MT8186_MMSYS_OVL_CON			0xF04
 #define MT8186_MMSYS_OVL0_CON_MASK			0x3
 #define MT8186_MMSYS_OVL0_2L_CON_MASK			0xC

drivers/soc/mediatek/mtk-mmsys.c

@@ -227,6 +227,26 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
 
+static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val)
+{
+	u32 tmp;
+
+	tmp = readl_relaxed(mmsys->regs + offset);
+	tmp = (tmp & ~mask) | val;
+	writel_relaxed(tmp, mmsys->regs + offset);
+}
+
+void mtk_mmsys_ddp_dpi_fmt_config(struct device *dev, u32 val)
+{
+	if (val)
+		mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8186_MMSYS_DPI_OUTPUT_FORMAT,
+				      DPI_RGB888_DDR_CON, DPI_FORMAT_MASK);
+	else
+		mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8186_MMSYS_DPI_OUTPUT_FORMAT,
+				      DPI_RGB565_SDR_CON, DPI_FORMAT_MASK);
+}
+EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_dpi_fmt_config);
+
 static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned long id,
 				  bool assert)
 {

drivers/soc/mediatek/mtk-mutex.c

@@ -91,6 +91,15 @@
 #define MT8183_MUTEX_MOD_MDP_AAL0		23
 #define MT8183_MUTEX_MOD_MDP_CCORR0		24
 
+#define MT8186_MUTEX_MOD_MDP_RDMA0		0
+#define MT8186_MUTEX_MOD_MDP_AAL0		2
+#define MT8186_MUTEX_MOD_MDP_HDR0		4
+#define MT8186_MUTEX_MOD_MDP_RSZ0		5
+#define MT8186_MUTEX_MOD_MDP_RSZ1		6
+#define MT8186_MUTEX_MOD_MDP_WROT0		7
+#define MT8186_MUTEX_MOD_MDP_TDSHP0		9
+#define MT8186_MUTEX_MOD_MDP_COLOR0		14
+
 #define MT8173_MUTEX_MOD_DISP_OVL0		11
 #define MT8173_MUTEX_MOD_DISP_OVL1		12
 #define MT8173_MUTEX_MOD_DISP_RDMA0		13
@@ -324,6 +333,17 @@ static const unsigned int mt8186_mutex_mod[DDP_COMPONENT_ID_MAX] = {
 	[DDP_COMPONENT_RDMA1] = MT8186_MUTEX_MOD_DISP_RDMA1,
 };
 
+static const unsigned int mt8186_mdp_mutex_table_mod[MUTEX_MOD_IDX_MAX] = {
+	[MUTEX_MOD_IDX_MDP_RDMA0] = MT8186_MUTEX_MOD_MDP_RDMA0,
+	[MUTEX_MOD_IDX_MDP_RSZ0] = MT8186_MUTEX_MOD_MDP_RSZ0,
+	[MUTEX_MOD_IDX_MDP_RSZ1] = MT8186_MUTEX_MOD_MDP_RSZ1,
+	[MUTEX_MOD_IDX_MDP_TDSHP0] = MT8186_MUTEX_MOD_MDP_TDSHP0,
+	[MUTEX_MOD_IDX_MDP_WROT0] = MT8186_MUTEX_MOD_MDP_WROT0,
+	[MUTEX_MOD_IDX_MDP_HDR0] = MT8186_MUTEX_MOD_MDP_HDR0,
+	[MUTEX_MOD_IDX_MDP_AAL0] = MT8186_MUTEX_MOD_MDP_AAL0,
+	[MUTEX_MOD_IDX_MDP_COLOR0] = MT8186_MUTEX_MOD_MDP_COLOR0,
+};
+
 static const unsigned int mt8192_mutex_mod[DDP_COMPONENT_ID_MAX] = {
 	[DDP_COMPONENT_AAL0] = MT8192_MUTEX_MOD_DISP_AAL0,
 	[DDP_COMPONENT_CCORR] = MT8192_MUTEX_MOD_DISP_CCORR0,
@@ -380,6 +400,13 @@ static const unsigned int mt2712_mutex_sof[DDP_MUTEX_SOF_MAX] = {
 	[MUTEX_SOF_DSI3] = MUTEX_SOF_DSI3,
 };
 
+static const unsigned int mt6795_mutex_sof[DDP_MUTEX_SOF_MAX] = {
+	[MUTEX_SOF_SINGLE_MODE] = MUTEX_SOF_SINGLE_MODE,
+	[MUTEX_SOF_DSI0] = MUTEX_SOF_DSI0,
+	[MUTEX_SOF_DSI1] = MUTEX_SOF_DSI1,
+	[MUTEX_SOF_DPI0] = MUTEX_SOF_DPI0,
+};
+
 static const unsigned int mt8167_mutex_sof[DDP_MUTEX_SOF_MAX] = {
 	[MUTEX_SOF_SINGLE_MODE] = MUTEX_SOF_SINGLE_MODE,
 	[MUTEX_SOF_DSI0] = MUTEX_SOF_DSI0,
@@ -434,6 +461,13 @@ static const struct mtk_mutex_data mt2712_mutex_driver_data = {
 	.mutex_sof_reg = MT2701_MUTEX0_SOF0,
 };
 
+static const struct mtk_mutex_data mt6795_mutex_driver_data = {
+	.mutex_mod = mt8173_mutex_mod,
+	.mutex_sof = mt6795_mutex_sof,
+	.mutex_mod_reg = MT2701_MUTEX0_MOD0,
+	.mutex_sof_reg = MT2701_MUTEX0_SOF0,
+};
+
 static const struct mtk_mutex_data mt8167_mutex_driver_data = {
 	.mutex_mod = mt8167_mutex_mod,
 	.mutex_sof = mt8167_mutex_sof,
@@ -458,6 +492,12 @@ static const struct mtk_mutex_data mt8183_mutex_driver_data = {
 	.no_clk = true,
 };
 
+static const struct mtk_mutex_data mt8186_mdp_mutex_driver_data = {
+	.mutex_mod_reg = MT8183_MUTEX0_MOD0,
+	.mutex_sof_reg = MT8183_MUTEX0_SOF0,
+	.mutex_table_mod = mt8186_mdp_mutex_table_mod,
+};
+
 static const struct mtk_mutex_data mt8186_mutex_driver_data = {
 	.mutex_mod = mt8186_mutex_mod,
 	.mutex_sof = mt8186_mutex_sof,
@@ -802,6 +842,8 @@ static const struct of_device_id mutex_driver_dt_match[] = {
 	  .data = &mt2701_mutex_driver_data},
 	{ .compatible = "mediatek,mt2712-disp-mutex",
 	  .data = &mt2712_mutex_driver_data},
+	{ .compatible = "mediatek,mt6795-disp-mutex",
+	  .data = &mt6795_mutex_driver_data},
 	{ .compatible = "mediatek,mt8167-disp-mutex",
 	  .data = &mt8167_mutex_driver_data},
 	{ .compatible = "mediatek,mt8173-disp-mutex",
@@ -810,6 +852,8 @@ static const struct of_device_id mutex_driver_dt_match[] = {
 	  .data = &mt8183_mutex_driver_data},
 	{ .compatible = "mediatek,mt8186-disp-mutex",
 	  .data = &mt8186_mutex_driver_data},
+	{ .compatible = "mediatek,mt8186-mdp3-mutex",
+	  .data = &mt8186_mdp_mutex_driver_data},
 	{ .compatible = "mediatek,mt8192-disp-mutex",
 	  .data = &mt8192_mutex_driver_data},
 	{ .compatible = "mediatek,mt8195-disp-mutex",

drivers/soc/mediatek/mtk-pm-domains.c

@@ -393,7 +393,7 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
 		if (IS_ERR(clk)) {
 			ret = PTR_ERR(clk);
 			dev_err_probe(scpsys->dev, ret,
-				      "%pOF: failed to get clk at index %d: %d\n", node, i, ret);
+				      "%pOF: failed to get clk at index %d\n", node, i);
 			goto err_put_clocks;
 		}
 
@@ -405,8 +405,8 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
 		if (IS_ERR(clk)) {
 			ret = PTR_ERR(clk);
 			dev_err_probe(scpsys->dev, ret,
-				      "%pOF: failed to get clk at index %d: %d\n", node,
-				      i + clk_ind, ret);
+				      "%pOF: failed to get clk at index %d\n", node,
+				      i + clk_ind);
 			goto err_put_subsys_clocks;
 		}
 

drivers/soc/mediatek/mtk-pmic-wrap.c

@@ -2316,7 +2316,7 @@ static int pwrap_probe(struct platform_device *pdev)
 static struct platform_driver pwrap_drv = {
 	.driver = {
 		.name = "mt-pmic-pwrap",
-		.of_match_table = of_match_ptr(of_pwrap_match_tbl),
+		.of_match_table = of_pwrap_match_tbl,
 	},
 	.probe = pwrap_probe,
 };

drivers/soc/mediatek/mtk-scpsys.c

@@ -1141,7 +1141,7 @@ static struct platform_driver scpsys_drv = {
 		.name = "mtk-scpsys",
 		.suppress_bind_attrs = true,
 		.owner = THIS_MODULE,
-		.of_match_table = of_match_ptr(of_scpsys_match_tbl),
+		.of_match_table = of_scpsys_match_tbl,
 	},
 };
 builtin_platform_driver(scpsys_drv);

drivers/soc/qcom/Kconfig

@@ -129,7 +129,7 @@ config QCOM_RPMHPD
 
 config QCOM_RPMPD
 	tristate "Qualcomm RPM Power domain driver"
-	depends on PM
+	depends on PM && OF
 	depends on QCOM_SMD_RPM
 	select PM_GENERIC_DOMAINS
 	select PM_GENERIC_DOMAINS_OF

drivers/soc/qcom/llcc-qcom.c

@@ -104,6 +104,7 @@ struct qcom_llcc_config {
 	int size;
 	bool need_llcc_cfg;
 	const u32 *reg_offset;
+	const struct llcc_edac_reg_offset *edac_reg_offset;
 };
 
 enum llcc_reg_offset {
@@ -296,12 +297,68 @@ static const struct llcc_slice_config sm8450_data[] =  {
 	{LLCC_AENPU,     8, 2048, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 0, 0, 0, 0 },
 };
 
-static const u32 llcc_v1_2_reg_offset[] = {
+static const struct llcc_edac_reg_offset llcc_v1_edac_reg_offset = {
+	.trp_ecc_error_status0 = 0x20344,
+	.trp_ecc_error_status1 = 0x20348,
+	.trp_ecc_sb_err_syn0 = 0x2304c,
+	.trp_ecc_db_err_syn0 = 0x20370,
+	.trp_ecc_error_cntr_clear = 0x20440,
+	.trp_interrupt_0_status = 0x20480,
+	.trp_interrupt_0_clear = 0x20484,
+	.trp_interrupt_0_enable = 0x20488,
+
+	/* LLCC Common registers */
+	.cmn_status0 = 0x3000c,
+	.cmn_interrupt_0_enable = 0x3001c,
+	.cmn_interrupt_2_enable = 0x3003c,
+
+	/* LLCC DRP registers */
+	.drp_ecc_error_cfg = 0x40000,
+	.drp_ecc_error_cntr_clear = 0x40004,
+	.drp_interrupt_status = 0x41000,
+	.drp_interrupt_clear = 0x41008,
+	.drp_interrupt_enable = 0x4100c,
+	.drp_ecc_error_status0 = 0x42044,
+	.drp_ecc_error_status1 = 0x42048,
+	.drp_ecc_sb_err_syn0 = 0x4204c,
+	.drp_ecc_db_err_syn0 = 0x42070,
+};
+
+static const struct llcc_edac_reg_offset llcc_v2_1_edac_reg_offset = {
+	.trp_ecc_error_status0 = 0x20344,
+	.trp_ecc_error_status1 = 0x20348,
+	.trp_ecc_sb_err_syn0 = 0x2034c,
+	.trp_ecc_db_err_syn0 = 0x20370,
+	.trp_ecc_error_cntr_clear = 0x20440,
+	.trp_interrupt_0_status = 0x20480,
+	.trp_interrupt_0_clear = 0x20484,
+	.trp_interrupt_0_enable = 0x20488,
+
+	/* LLCC Common registers */
+	.cmn_status0 = 0x3400c,
+	.cmn_interrupt_0_enable = 0x3401c,
+	.cmn_interrupt_2_enable = 0x3403c,
+
+	/* LLCC DRP registers */
+	.drp_ecc_error_cfg = 0x50000,
+	.drp_ecc_error_cntr_clear = 0x50004,
+	.drp_interrupt_status = 0x50020,
+	.drp_interrupt_clear = 0x50028,
+	.drp_interrupt_enable = 0x5002c,
+	.drp_ecc_error_status0 = 0x520f4,
+	.drp_ecc_error_status1 = 0x520f8,
+	.drp_ecc_sb_err_syn0 = 0x520fc,
+	.drp_ecc_db_err_syn0 = 0x52120,
+};
+
+/* LLCC register offset starting from v1.0.0 */
+static const u32 llcc_v1_reg_offset[] = {
 	[LLCC_COMMON_HW_INFO]	= 0x00030000,
 	[LLCC_COMMON_STATUS0]	= 0x0003000c,
 };
 
-static const u32 llcc_v21_reg_offset[] = {
+/* LLCC register offset starting from v2.0.1 */
+static const u32 llcc_v2_1_reg_offset[] = {
 	[LLCC_COMMON_HW_INFO]	= 0x00034000,
 	[LLCC_COMMON_STATUS0]	= 0x0003400c,
 };
@@ -310,70 +367,80 @@ static const struct qcom_llcc_config sc7180_cfg = {
 	.sct_data	= sc7180_data,
 	.size		= ARRAY_SIZE(sc7180_data),
 	.need_llcc_cfg	= true,
-	.reg_offset	= llcc_v1_2_reg_offset,
+	.reg_offset	= llcc_v1_reg_offset,
+	.edac_reg_offset = &llcc_v1_edac_reg_offset,
 };
 
 static const struct qcom_llcc_config sc7280_cfg = {
 	.sct_data	= sc7280_data,
 	.size		= ARRAY_SIZE(sc7280_data),
 	.need_llcc_cfg	= true,
-	.reg_offset	= llcc_v1_2_reg_offset,
+	.reg_offset	= llcc_v1_reg_offset,
+	.edac_reg_offset = &llcc_v1_edac_reg_offset,
 };
 
 static const struct qcom_llcc_config sc8180x_cfg = {
 	.sct_data	= sc8180x_data,
 	.size		= ARRAY_SIZE(sc8180x_data),
 	.need_llcc_cfg	= true,
-	.reg_offset	= llcc_v1_2_reg_offset,
+	.reg_offset	= llcc_v1_reg_offset,
+	.edac_reg_offset = &llcc_v1_edac_reg_offset,
 };
 
 static const struct qcom_llcc_config sc8280xp_cfg = {
 	.sct_data	= sc8280xp_data,
 	.size		= ARRAY_SIZE(sc8280xp_data),
 	.need_llcc_cfg	= true,
-	.reg_offset	= llcc_v1_2_reg_offset,
+	.reg_offset	= llcc_v1_reg_offset,
+	.edac_reg_offset = &llcc_v1_edac_reg_offset,
 };
 
 static const struct qcom_llcc_config sdm845_cfg = {
 	.sct_data	= sdm845_data,
 	.size		= ARRAY_SIZE(sdm845_data),
 	.need_llcc_cfg	= false,
-	.reg_offset	= llcc_v1_2_reg_offset,
+	.reg_offset	= llcc_v1_reg_offset,
+	.edac_reg_offset = &llcc_v1_edac_reg_offset,
 };
 
 static const struct qcom_llcc_config sm6350_cfg = {
 	.sct_data	= sm6350_data,
 	.size		= ARRAY_SIZE(sm6350_data),
 	.need_llcc_cfg	= true,
-	.reg_offset	= llcc_v1_2_reg_offset,
+	.reg_offset	= llcc_v1_reg_offset,
+	.edac_reg_offset = &llcc_v1_edac_reg_offset,
 };
 
 static const struct qcom_llcc_config sm8150_cfg = {
 	.sct_data       = sm8150_data,
 	.size           = ARRAY_SIZE(sm8150_data),
 	.need_llcc_cfg	= true,
-	.reg_offset	= llcc_v1_2_reg_offset,
+	.reg_offset	= llcc_v1_reg_offset,
+	.edac_reg_offset = &llcc_v1_edac_reg_offset,
 };
 
 static const struct qcom_llcc_config sm8250_cfg = {
 	.sct_data       = sm8250_data,
 	.size           = ARRAY_SIZE(sm8250_data),
 	.need_llcc_cfg	= true,
-	.reg_offset	= llcc_v1_2_reg_offset,
+	.reg_offset	= llcc_v1_reg_offset,
+	.edac_reg_offset = &llcc_v1_edac_reg_offset,
 };
 
 static const struct qcom_llcc_config sm8350_cfg = {
 	.sct_data       = sm8350_data,
 	.size           = ARRAY_SIZE(sm8350_data),
 	.need_llcc_cfg	= true,
-	.reg_offset	= llcc_v1_2_reg_offset,
+	.reg_offset	= llcc_v1_reg_offset,
+	.edac_reg_offset = &llcc_v1_edac_reg_offset,
 };
 
 static const struct qcom_llcc_config sm8450_cfg = {
 	.sct_data       = sm8450_data,
 	.size           = ARRAY_SIZE(sm8450_data),
 	.need_llcc_cfg	= true,
-	.reg_offset	= llcc_v21_reg_offset,
+	.reg_offset	= llcc_v2_1_reg_offset,
+	.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
 };
 
 static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
@@ -774,6 +841,7 @@ static int qcom_llcc_probe(struct platform_device *pdev)
 
 	drv_data->cfg = llcc_cfg;
 	drv_data->cfg_size = sz;
+	drv_data->edac_reg_offset = cfg->edac_reg_offset;
 	mutex_init(&drv_data->lock);
 	platform_set_drvdata(pdev, drv_data);
 

drivers/soc/qcom/qcom_stats.c

@@ -246,6 +246,14 @@ static const struct stats_config rpm_data_dba0 = {
 	.subsystem_stats_in_smem = false,
 };
 
+static const struct stats_config rpmh_data_sdm845 = {
+	.stats_offset = 0x48,
+	.num_records = 2,
+	.appended_stats_avail = false,
+	.dynamic_offset = false,
+	.subsystem_stats_in_smem = true,
+};
+
 static const struct stats_config rpmh_data = {
 	.stats_offset = 0x48,
 	.num_records = 3,
@@ -261,6 +269,7 @@ static const struct of_device_id qcom_stats_table[] = {
 	{ .compatible = "qcom,msm8974-rpm-stats", .data = &rpm_data_dba0 },
 	{ .compatible = "qcom,rpm-stats", .data = &rpm_data },
 	{ .compatible = "qcom,rpmh-stats", .data = &rpmh_data },
+	{ .compatible = "qcom,sdm845-rpmh-stats", .data = &rpmh_data_sdm845 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_stats_table);

drivers/soc/qcom/rpmpd.c

@@ -29,6 +29,7 @@
 #define RPMPD_RWLM 0x6d6c7772
 #define RPMPD_RWSC 0x63737772
 #define RPMPD_RWSM 0x6d737772
+#define RPMPD_RWGX 0x78677772
 
 /* Operation Keys */
 #define KEY_CORNER		0x6e726f63 /* corn */
@@ -433,6 +434,26 @@ static const struct rpmpd_desc sm6125_desc = {
 	.max_state = RPM_SMD_LEVEL_BINNING,
 };
 
+DEFINE_RPMPD_PAIR(sm6375, vddgx, vddgx_ao, RWGX, LEVEL, 0);
+static struct rpmpd *sm6375_rpmpds[] = {
+	[SM6375_VDDCX] = &sm6125_vddcx,
+	[SM6375_VDDCX_AO] = &sm6125_vddcx_ao,
+	[SM6375_VDDCX_VFL] = &sm6125_vddcx_vfl,
+	[SM6375_VDDMX] = &sm6125_vddmx,
+	[SM6375_VDDMX_AO] = &sm6125_vddmx_ao,
+	[SM6375_VDDMX_VFL] = &sm6125_vddmx_vfl,
+	[SM6375_VDDGX] = &sm6375_vddgx,
+	[SM6375_VDDGX_AO] = &sm6375_vddgx_ao,
+	[SM6375_VDD_LPI_CX] = &sm6115_vdd_lpi_cx,
+	[SM6375_VDD_LPI_MX] = &sm6115_vdd_lpi_mx,
+};
+
+static const struct rpmpd_desc sm6375_desc = {
+	.rpmpds = sm6375_rpmpds,
+	.num_pds = ARRAY_SIZE(sm6375_rpmpds),
+	.max_state = RPM_SMD_LEVEL_TURBO_NO_CPR,
+};
+
 static struct rpmpd *qcm2290_rpmpds[] = {
 	[QCM2290_VDDCX] = &sm6115_vddcx,
 	[QCM2290_VDDCX_AO] = &sm6115_vddcx_ao,
@@ -466,6 +487,7 @@ static const struct of_device_id rpmpd_match_table[] = {
 	{ .compatible = "qcom,sdm660-rpmpd", .data = &sdm660_desc },
 	{ .compatible = "qcom,sm6115-rpmpd", .data = &sm6115_desc },
 	{ .compatible = "qcom,sm6125-rpmpd", .data = &sm6125_desc },
+	{ .compatible = "qcom,sm6375-rpmpd", .data = &sm6375_desc },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rpmpd_match_table);