- 10 Apr, 2023 3 commits
-
-
Alexandre Mergnat authored
Deprecate mediatek,drive-strength-adv which shall not exist, that was an unnecessary property that leaked upstream from downstream kernels and there's no reason to use it. The generic property drive-strength-microamp should be used instead. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Alexandre Mergnat <amergnat@baylibre.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230327-cleanup-pinctrl-binding-v3-1-6f56d5c7a8de@baylibre.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Bartosz Golaszewski authored
Add support for the GPIO controller present on the pmm8654au PMIC. Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by:
-
Bartosz Golaszewski authored
Add a new compatible for the GPIO controller on the pm8654au PMIC. It has 12 pins with no holes. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
- 04 Apr, 2023 3 commits
-
-
Tom Rix authored
smatch reports drivers/pinctrl/pinctrl-mlxbf3.c:162:20: warning: symbol 'mlxbf3_pmx_funcs' was not declared. Should it be static? This variable is only used in one file so it should be static. Signed-off-by:
Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230404004501.1913144-1-trix@redhat.comSigned-off-by:
-
Lakshmi Sowjanya D authored
Remove Thunder Bay specific code as the product got cancelled and there are no end customers or users. Signed-off-by:
Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Link: https://lore.kernel.org/r/20230403120235.939-2-lakshmi.sowjanya.d@intel.comSigned-off-by:
-
Lakshmi Sowjanya D authored
Remove Thunder Bay specific code as the product got cancelled and there are no end customers or users. Signed-off-by:
-
- 31 Mar, 2023 5 commits
-
-
Aleksander Jan Bajkowski authored
This code are marked as deprecated since kernel 4.5[1]. Downstream OpenWRT and upstream switched to the new string compatible 7 years ago. The old compatible strings can safely be dropped. [1] commit be14811c ("pinctrl/lantiq: introduce new dedicated devicetree bindings") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by:
-
Aleksander Jan Bajkowski authored
This code are marked as deprecated since kernel 4.5[1]. Downstream OpenWRT and upstream switched to the new string compatible 7 years ago. The old compatible strings can safely be dropped. [1] commit be14811c ("pinctrl/lantiq: introduce new dedicated devicetree bindings") Signed-off-by:
-
Rob Herring authored
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Reviewed-by:
Hector Martin <marcan@marcan.st> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> #rockchip Reviewed-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by:
-
Mario Limonciello authored
If the firmware has misconfigured a GPIO it may cause interrupt status or wake status bits to be set and not asserted. Add these to debug output to catch this case. Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230328174231.8924-3-mario.limonciello@amd.comSigned-off-by:
-
Mario Limonciello authored
More fields are to be added, so to keep the display from being too busy, adjust it. 1) Add a header to all columns 2) Except for interrupt, when fields have no data show empty 3) Remove otherwise blank whitespace Signed-off-by:
-
- 29 Mar, 2023 6 commits
-
-
Uwe Kleine-König authored
To speed up some usecases implement reading and writing several IO lines at once. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230324164957.485924-3-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The semantic of mcp_set_mask() was surprising to me when I first read that driver. So it was unexpected that in the call mcp_set_mask(mcp, MCP_OLAT, mask, value); value was a bool. Make the function a thinner wrapper around regmap_update_bits() and rename it to also have a similar name. Signed-off-by:
-
Linus Walleij authored
-
Douglas Anderson authored
The Qualcomm pinctrl driver has been violating the documented meaning of PIN_CONFIG_INPUT_ENABLE. That documentation says: Note that this does not affect the pin's ability to drive output. ...yet the Qualcomm driver's sole action when asked to "enable input" on a pin is to disable its output. The Qualcomm driver's implementation stems from the fact that "output-disable" is a "new" property from 2017. It was introduced in commit 42556242 ("pinctrl: generic: Add output-enable property"). The "input-enable" handling in Qualcomm drivers is from 2015 introduced in commit 407f5e39 ("pinctrl: qcom: handle input-enable pinconf property"). Let's change the Qualcomm driver to move us in the right direction. As part of this: 1. We'll now support PIN_CONFIG_OUTPUT_ENABLE 2. We'll still support using PIN_CONFIG_INPUT_ENABLE to disable a pin's output (in violation of the docs) with a big comment in the code. This is needed because old device trees have "input-enable" in them and, in some cases, people might need the old behavior. While we could programmatically change all old device trees, it doesn't really hurt to keep supporting the old behavior and we're _supposed_ to try to be compatible with old device trees anyway. It can also be noted that the PIN_CONFIG_INPUT_ENABLE handling code seems to have purposefully ignored its argument. That means that old boards that had _either_ "input-disable" or "input-enable" in them would have had the effect of disabling a pin's output. While we could change this behavior, since we're only leaving the PIN_CONFIG_INPUT_ENABLE there for backward compatibility we might as well be fully backward compatible. NOTE: despite the fact that we'll still support PIN_CONFIG_INPUT_ENABLE for _setting_ config, we take it away from msm_config_group_get(). This appears to be only used for populating debugfs and fixing debugfs to "output enabled" where relevant instead of "input enabled" makes more sense and has more truthiness. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Bjorn Andersson <andersson@kernel.org> Acked-by:
-
Douglas Anderson authored
In the patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") we allowed setting "output-disable" for TLMM pinctrl states. Let's also add "output-enable". At first blush this seems a needless thing to do. Specifically: - In Linux (and presumably any other OSes using the same device trees) the GPIO/pinctrl driver knows to automatically enable the output when a GPIO is changed to an output. Thus in most cases specifying "output-enable" is superfluous and should be avoided. - If we need to set a pin's default state we already have "output-high" and "output-low" and these properties already imply "output-enabled" (at least on the Linux Qualcomm TLMM driver). However, there is one instance where "output-enable" seems like it could be useful: sleep states. It's not uncommon to want to configure pins as inputs (with appropriate pulls) when the driver controlling them is in a low power state. Then we want the pins back to outputs when the driver wants things running normally. To accomplish this we'd want to be able to use "output-enable". Then the "default" state could have "output-enable" and the "sleep" state could have "output-disable". NOTE: in all instances I'm aware of, we'd only want to use "output-enable" on pins that are configured as "gpio". The Qualcomm documentation that I have access to says that "output-enable" only does something useful when in GPIO mode. Signed-off-by: -
Douglas Anderson authored
As evidenced by the Qualcomm TLMM Linux driver, the TLMM IP block in Qualcomm SoCs has a bit to enable/disable the output for a pin that's configured as a GPIO but _not_ a bit to enable/disable an input buffer. Current device trees that are specifying "input-enable" for pins managed by TLMM are either doing so needlessly or are using it to mean "output-disable". Presumably the current convention of using "input-enable" to mean "output-disable" stems from the fact that "output-disable" is a "new" property from 2017. It was introduced in commit 42556242 ("pinctrl: generic: Add output-enable property"). The "input-enable" handling in Qualcomm drivers is from 2015 introduced in commit 407f5e39 ("pinctrl: qcom: handle input-enable pinconf property"). Given that there's no other use for "input-enable" for TLMM, we can still handle old device trees in code, but let's encourage people to move to the proper / documented property by updating the bindings. Signed-off-by:
-
- 27 Mar, 2023 6 commits
-
-
Heiner Kallweit authored
Convert Amlogic Meson pin controller binding to yaml. Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/dd29c1b7-05db-dd98-df40-20a238d89a96@gmail.comSigned-off-by:
-
Chester Lin authored
Replace struct s32_pmx_func with generic struct pinfunction since they have the same data fields. Suggested-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Chester Lin <clin@suse.com> Reviewed-by:
-
Chester Lin authored
Use generic data structure to describe pin control groups in S32 SoC family and drop duplicated struct members. Suggested-by:
-
Chester Lin authored
Move common codes into smaller inline functions and remove argument checks that are not actually used by pull up/down bits in the S32 MSCR register. Signed-off-by:
-
Chester Lin authored
Improve error/return code handlings and config checks in order to have better reliability and simplify driver codes such as removing/changing improper macros, blanks, print formats and helper calls. Signed-off-by:
-
Linus Walleij authored
Merge tag 'renesas-pinctrl-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v6.4 - Add pin groups for audio on R-Car V4H, - Drop support for the obsolete R-Car H3 ES1.* (R8A77950) SoC, - Miscellaneous fixes and improvements.
-
- 23 Mar, 2023 1 commit
-
-
Rob Herring authored
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by:
-
- 19 Mar, 2023 16 commits
-
-
Asmaa Mnebhi authored
NVIDIA BlueField-3 SoC has a few pins that can be used as GPIOs or take the default hardware functionality. Add a driver for the pin muxing. Signed-off-by:
Asmaa Mnebhi <asmaa@nvidia.com> Reviewed-by:
-
Johan Hovold authored
The controller supports 'bias-bus-hold' so add it to the binding. Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Acked-by:
-
Konrad Dybcio authored
Allow the common input-enable. This was missed with the initial submission. Fixes: 51470222 ("dt-bindings: pinctrl: qcom: Add QCM2290 pinctrl bindings") Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Acked-by:
-
Devi Priya authored
Add pinctrl definitions for the TLMM of IPQ9574 Reviewed-by:
Anusha Rao <quic_anusha@quicinc.com> Signed-off-by:
Devi Priya <quic_devipriy@quicinc.com> Link: https://lore.kernel.org/r/20230316072940.29137-5-quic_devipriy@quicinc.comSigned-off-by:
-
Devi Priya authored
Add new binding document for pinctrl on IPQ9574 Reviewed-by:
-
Danila Tikhonov authored
Add pinctrl driver for TLMM block found in SM7150 SoC. Signed-off-by:
Danila Tikhonov <danila@jiaxyga.com> Link: https://lore.kernel.org/r/20230311212114.108870-3-danila@jiaxyga.comSigned-off-by:
-
Danila Tikhonov authored
Add device tree binding Documentation details for Qualcomm SM7150 TLMM device Signed-off-by:
-
Arınç ÜNAL authored
The Ralink pinctrl driver is now under the name of MediaTek MIPS pin controller. Move the maintainer information accordingly. Add dt-binding schema files. Add linux-mediatek@lists.infradead.org as an associated mailing list. Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20230317213011.13656-22-arinc.unal@arinc9.comSigned-off-by:
-
Arınç ÜNAL authored
The MT7628 and MT7688 SoCs contain different pin muxing information, therefore, should be split. This can be done now that there are compatible strings to distinguish them from other SoCs. Split the schema out to mediatek,mt76x8-pinctrl.yaml. Remove mediatek,mt76x8-pinctrl from mt7620. Signed-off-by:
-
Arınç ÜNAL authored
The RT3352 and RT5350 SoCs each contain different pin muxing information, therefore, should be split. This can be done now that there are compatible strings to distinguish them from other SoCs. Split the schema out to ralink,rt3352-pinctrl.yaml and ralink,rt5350-pinctrl.yaml. Remove ralink,rt3352-pinctrl and ralink,rt5350-pinctrl from rt305x. Signed-off-by:
-
Arınç ÜNAL authored
Set second level patternProperties to '^.*mux.*$' and '^.*conf.*$' on mediatek,mt7986-pinctrl.yaml to be on par with other schemas. Signed-off-by:
-
Arınç ÜNAL authored
Drop the quotes from the referred schemas. Signed-off-by:
-
Arınç ÜNAL authored
Fix the location of the pinmux header files mentioned on the schemas. Signed-off-by:
-
Arınç ÜNAL authored
Change the style of description properties to plain style where there's no need to preserve the line endings, and vice versa. Fix capitalisation and indentation. Fit the schemas to 80 columns for each line. Signed-off-by:
-
Arınç ÜNAL authored
Some schemas include "MediaTek", some "Mediatek". Rename all to "MediaTek" to address the naming inconsistency. Signed-off-by:
-
Arınç ÜNAL authored
Rename pinctrl-mt8195.yaml to mediatek,mt8195-pinctrl.yaml to be on par with the compatible string and other mediatek dt-binding schemas. Signed-off-by:
-
