- 05 Dec, 2006 2 commits
-
-
Jeff Garzik authored
megaraid's MMIO RD*/WR* macros directly call readl() and writel() with an 'unsigned long' argument. This throws a warning, but is otherwise OK because the 'unsigned long' is really the result of ioremap(). This setup is also OK because the variable can hold an ioremap cookie /or/ a PCI I/O port (PIO). However, to fix the warning thrown when readl() and writel() are passed an unsigned long cookie, I introduce 'void __iomem *mmio_base', holding the same value as 'base'. This will silence the warnings, and also cause an oops whenever these MMIO-only functions are ever accidentally passed an I/O address. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
akpm@osdl.org authored
drivers/scsi/scsi_tgt_if.c: In function 'tgt_uspace_send_event': drivers/scsi/scsi_tgt_if.c:88: warning: implicit declaration of function 'flush_dcache_page' Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
- 03 Dec, 2006 14 commits
-
-
James Bottomley authored
With async scanning, we're now tripping the BUG_ON in sas_ex_discover_end_dev(), so make the error handling here correct. Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Smart authored
Change version number to 8.1.11 Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Smart authored
Misc Fixes: - Prevent references to NULL node list element in reset routines. - Add missing IOCB types to switch tables - Reset the card on Port Error 5 - Fix infinite loop in LUN reset Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Smart authored
The driver now allows both wwpn and wwnn to be set. Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Smart authored
To avoid continually updating the driver for new subsystem ids (as adapter modules are proliferating), remove this 2nd level decode. Genericize the reported Adapter names to be consistent across Emulex product line. Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Smart authored
Add MSI (Message Signalled Interrupts) support Actual use must be enabled via the new module parameter "lpfc_use_msi" Defaults to no use Many thanks to Frederic Temporelli who implemented the initial patch. Signed-off-by:
Frederic Temporelli <frederic.temporelli@ext.bull.net> Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Smart authored
Adjust LOG_FCP logging to be more meaningful. Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Smart authored
Fix Memory leaks associated with mbox cmds READ_LA, READ_SPARAM, REG_LOGIN Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Smart authored
It was not accounted for in the fast/slow rings. Genericize the implementation and control it via sysfs Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Smart authored
Discovery Fixes: - Prevent starting discovery of a node if discovery is in progress. - Code improvement (reduction) for lpfc_findnode_did(). - Update discovery to send RFF to Fabric on link up - Bypass unique WWN checks for fabric addresses - Add ndlp to plogi list prior to issuing the plogi els command Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
FUJITA Tomonori authored
This is IBM Virtual SCSI target driver for tgt. The driver is based on the original ibmvscsis driver: http://lkml.org/lkml/2005/10/17/99Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Santiago Leon <santil@us.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
FUJITA Tomonori authored
libsrp provides helper functions for SRP target drivers. Some SRP target drivers would be out of drivers/scsi/ so we added an entry for libsrp in drivers/scsi/Kconfig. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Santiago Leon <santil@us.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
In the switch over, I forgot to set the command length, so it sends out a request sense with whatever length the prior command had (and fails badly if it wasn't 6). Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Randy Dunlap authored
Use NULL instead of 0 for pointers (sparse warning): drivers/scsi/qla2xxx/qla_attr.c:393:4: warning: Using plain integer as NULL pointer Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
- 25 Nov, 2006 5 commits
-
-
FUJITA Tomonori authored
Makefile and Kconfig for tgt. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
FUJITA Tomonori authored
The user-space daemon and tgt kernel module need bi-directional kernel/user high-performance interface, however, mainline provides no standard interface like that. This patch adds shared memory interface between kernel and user spaces like some other drivers do by using own character device. The user-space daemon and tgt kernel module creates shared memory via mmap and use it like ring buffer. poll (kernel to user) and write (user to kernel) system calls are used for notification. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
FUJITA Tomonori authored
The core scsi target lib functions. TODO: - mv md/dm-bio-list.h to linux/bio-list.h so md and us do not have to do that weird include. - convert scsi_tgt_cmd's work struct to James's execute code. And try to kill our scsi_tgt_cmd. - add host state checking. We do refcouting so hotplug is partially supported, but we need to add state checking to make it easier on the LLD. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
FUJITA Tomonori authored
This patch contains the needed changes to the scsi-ml for the target mode support. Note, per the last review we moved almost all the fields we added to the scsi_cmnd to our internal data structure which we are going to try and kill off when we can replace it with support from other parts of the kernel. The one field we left on was the offset variable. This is needed to handle the case where the target gets request that is so large that it cannot execute it in one dma operation. So max_secotors or a segment limit may limit the size of the transfer. In this case our tgt core code will break up the command into managable transfers and send them to the LLD one at a time. The offset is then used to tell the LLD where in the command we are at. Is there another field on the scsi_cmd for that? Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Randy Dunlap authored
WARNING: drivers/scsi/initio.o - Section mismatch: reference to .init.data: from .text between 'i91u_detect' (at offset 0x26e8) and 'i91uSCBPost' WARNING: drivers/scsi/initio.o - Section mismatch: reference to .init.data:i91u_pci_devices from .text between 'i91u_detect' (at offset 0x26ef) and 'i91uSCBPost' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
- 22 Nov, 2006 19 commits
-
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
Modify intialization semantics: - perform basic hardware configuration only (as usual) - allocate resources - load and execute firmware - defer link (transport) negotiations to the DPC thread - again the code in qla2x00_initialize_adapter() to stall probe() completion was needed for legacy-style scanning. - DPC thread stalls until probe() complete. - before probe() completes, set DPC flags to perform loop-resync logic (similar to what's done during cable-insertion/removal). Benefits: user does not have to wait 20+ seconds in case the FC cable is unplugged during driver load, code consolidation (removal of redundant link negotiation logic during initialize_adaoter()), and finilly, the driver no longer needs to defer the fc_remote_port_add() calls to hold off lun-scanning prior to returning from the probe() function. Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
If a driver can find its own targets, it can now fill in scan_finished and (optionally) scan_start in the scsi_host_template. Then, when it calls scsi_scan_host(), it will be called back (from a thread if asynchronous discovery is enabled), first to start the scan, and then at intervals to check if the scan is completed. Also make scsi_prep_async_scan and scsi_finish_async_scan static. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
Drivers that called scsi_scan_target() instead of scsi_scan_host() were still adding devices; this needs to be under the control of userspace, not the driver. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
Without this patch, the user has to add a kernel command line parameter to get asynchronous SCSI scanning. Now they can select the default at compile time and still override it at boot time if they need to. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Mark Haverkamp authored
Received from Mark Salyzyn: Version patch, update to reflect a rough estimate of the Adaptec build (2423) that coincides with the sources on kernel.org. Signed-off-by:
Mark Haverkamp <markh@osdl.org> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Mark Haverkamp authored
Received from Mark Salyzyn: Add code to abort outstanding management ioctl fibs when the blinkLED recovery is performed. This code is 'clunky' and does not have any real feedback in that the reset could progress before the user application has gotten it's notification of command completion. We put a schedule() call to delay just the right amount for most cases, because we tried a spin and still managed to find cases where we would spin forever waiting for the management application to acknowledge the impending doom surrounding the cause of the BlinkLED. Will cause an oops in the context of the management application if we proceed too quickly. I view this as the lesser of many evils since currently if there are outstanding management ioctls during a need to reset/recover the adapter, the management application just locks up and waits forever. The best practices fix for this problem not going to be simple or easy (at least the fixes I imagine today); and we found a balance between the needs of the driver to proceed, and the applications that locked or confused that would hold back the driver. I just do not like the idea of a kernel oops in an application to deal with low priority, sluggish or misbehaving applications. Signed-off-by:
Mark Haverkamp <markh@osdl.org> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Mark Haverkamp authored
Received from Mark Salyzyn: Blinkled at startup is useful for catching Adapters in a lot of pain, in a BlinkLED assert, quickly; rather than waiting several minutes for commands to timeout. Signed-off-by:
Mark Haverkamp <markh@osdl.org> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Bump driver version. Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Adrian Bunk authored
This patch makes ipr_ioctl static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Since the default error log size has increased on SAS adapters, prevent ipr from logging this additional data unless requested to do so by the user set log level in order to prevent flooding the logs. Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Adds support for logging SAS fabric errors logged by the ipr firmware. Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Remove some debug trace points that clutter up the log when ipr debugging is turned on. Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Remove ipr's usage of the scsi transport eh_timed_out for handling SATA timeouts. This was only needed in order to set some flags on the qc prior to calling ata_do_eh. Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Both SCSI_IPR_TRACE and SCSI_IPR_DUMP should be defaulted to yes when SCSI_IPR is enabled. Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Adds PCI IDs for some new ipr SAS adapters. Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
The ipr disk array devices do not support a cancel all requests primitive, so change the ipr driver to never send it. Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
If an ipr adapter hits a fatal microcode error requiring a reset while a SATA device is going through EH, it can result in a command getting issued to the ipr adapter while it is getting reset, which can cause PCI bus errors. Wait for any outstanding adapter reset to finish prior to issuing a SATA device reset. Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
David C Somayajulu authored
This patch fixes a timing issue related to nvram accesses in qla4xxx driver for some cpu/slot speed combination. Signed-off-by:
David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-