- 23 Sep, 2022 5 commits
-
-
Peter Ujfalusi authored
The firmware register dump is IPC3 specific, it is not available for other IPC versions. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Link: https://lore.kernel.org/r/20220923133616.26267-6-peter.ujfalusi@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
The use of the IPC registers are different between IPC3 and IPC4. The ipc_dump needs to use different prints depending on the used IPC protocol. The existing code was printing registers relevant for IPC3, which is not even supported on MTL. Signed-off-by:
-
Peter Ujfalusi authored
The use of the IPC registers are different between IPC3 and IPC4. The ipc_dump needs to use different prints depending on the used IPC protocol. Signed-off-by:
-
Peter Ujfalusi authored
The use of the IPC registers are different between IPC3 and IPC4. The ipc_dump needs to use different prints depending on the used IPC protocol. Signed-off-by:
-
Peter Ujfalusi authored
The use of the IPC registers are different between IPC3 and IPC4. The ipc_dump needs to use different prints depending on the used IPC protocol. Signed-off-by:
-
- 22 Sep, 2022 2 commits
-
-
Pierre-Louis Bossart authored
Add IDs for RPL-M and RPL-PX Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
No functionality change, just sort ADL PCI IDs by increasing order. Signed-off-by:
-
- 21 Sep, 2022 10 commits
-
-
Chunxu Li authored
add pcm_pointer callback for mt8186 to support read host position from DSP Signed-off-by:
Chunxu Li <chunxu.li@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220921120239.31934-1-chunxu.li@mediatek.comSigned-off-by:
-
Mark Brown authored
Merge series from Astrid Rost <astrid.rost@axis.com>: Add debounce support to the ts3a227e driver.
-
Peter Ujfalusi authored
The allocated ida needs to be freed up if the IPC message fails since next time when we try again to set up the widget we are going to try to allocate another ID and given enough tries, we are going to run out of unique IDs. Fixes: 711d0427 ("ASoC: SOF: ipc4-topology: move ida allocate/free to widget_setup/free") Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
-
Zeng Heng authored
Just fix compile error without any logic changes. sound/soc/sunxi/sun50i-dmic.c:62:1: error: ‘static’ is not at beginning of declaration [-Werror=old-style-declaration] 62 | const static struct dmic_rate dmic_rate_s[] = { | ^~~~~ Signed-off-by:Zeng Heng <zengheng4@huawei.com> Link: https://lore.kernel.org/r/20220921033819.2188233-1-zengheng4@huawei.comSigned-off-by:
-
Astrid Rost authored
Add devicetree parameters to control the insertion, release and press debounce times. Signed-off-by:
Astrid Rost <astrid.rost@axis.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220921081834.22009-3-astrid.rost@axis.comSigned-off-by:
-
Astrid Rost authored
Convert from ts3a227e.txt to yaml. Signed-off-by:
-
Astrid Rost authored
Add devicetree parameters to control the insert, release and press debounce times. Signed-off-by:
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset was submitted earlier in April 2022 as part of the "ASoC: SOF: add INTEL_IPC4 plumbing" series. As requested the SKL/KBL support is moved to a different series. This update adds minor style fixes and the ops that were missing at the time. SKL and KBL daily tests have been running for several months and helped identify missing sequences in the SOF driver for HDaudio links, or platform differences that the driver did not account for (number of pipelines, etc). Note that this capability is not recommended for any distribution, it is ONLY for SOF IPC4 CI tests on HDaudio devices, we will not extend this SKL/KBL support for I2S devices based on ES8336 or Chromebooks which are ONLY supported by the AVS driver.
-
Mark Brown authored
Merge series from V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>: This series consists of 1.Make ACP core code generic for newer SOC transition 2.Add support for Rembrandt plaform 3.Adding amd HS functionality to the sof core 4.increase SRAM inbox and outbox size to 1024
-
Mark Brown authored
Merge series from Mario Limonciello <mario.limonciello@amd.com>: Another model from ASUS and Lenovo have been identified that don't include anything in ACPI tables to indicate they require the ACP6x DMIC driver to be loaded. This series adds them both to the quirk list.
-
- 20 Sep, 2022 23 commits
-
-
Yang Yingliang authored
After commit bfc5e8b8 ("ASoC: rt5682s: Reduce coupling of Micbias and Vref2 settings"), the return of rt5682s_probe() can be simplified. No functional changed. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220920151413.3455255-1-yangyingliang@huawei.comSigned-off-by:
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Two updates on warnings reported by cppcheck.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: 2 patches from Rander required to enable mixing usages with multiple pipelines.
-
Mark Brown authored
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: These are random cleanup for soc.h
-
Mario Limonciello authored
Lenovo Yoga Slim 7 Pro X has an ACP DMIC that isn't specified in the ASL or existing quirk list. Add it to the quirk table to let DMIC work on these systems. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216299Tested-by:
Sebastian S <iam@decentr.al> Reported-and-tested-by:
Travis Glenn Hansen <travisghansen@yahoo.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220920201436.19734-3-mario.limonciello@amd.comSigned-off-by:
-
Xiaoyan Li authored
ASUS Zenbook S 13 OLED (UM5302TA) needs this quirk to get the built-in microphone working properly. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216270Signed-off-by:
Xiaoyan Li <lxy.lixiaoyan@gmail.com> Suggested-by:
-
V sujith kumar Reddy authored
Increase inbox and outbox mailbox size from 512 to 1024 to support thirdparty DTS integration ipc tx/rx messages communication. This is done through firmware window get info. Signed-off-by:
V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com> Reviewed-by:
-
V sujith kumar Reddy authored
Add I2S HS control instance to the sof core. This will help the amd topology to use the I2S HS Dai. Signed-off-by:
-
V sujith kumar Reddy authored
Add pci driver and platform driver to enable SOF support on ACP6x architecture based Rembrandt platform. Signed-off-by:
Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Signed-off-by:
-
Ajit Kumar Pandey authored
Newer AMD SOC differs slightly in terms of few registers offset and configuration. Add offsets into chip_info struct to make core ACP code more generic and resusable on newer SOC. Signed-off-by:
-
Bard Liao authored
Add rpl_sdca_3_in_1 match information. Reviewed-by:
-
Alexander Martinz authored
Fix comments regarding register access based on review feedback[1]. [1]: https://lore.kernel.org/all/YppQ7BiqlBDMNsuc@gerhold.net/Signed-off-by:
Alexander Martinz <amartinz@shiftphones.com> Link: https://lore.kernel.org/r/20220920115014.952062-1-amartinz@shiftphones.comSigned-off-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/sof/ipc4-topology.c:1533:12: style: Variable 'pipeline' is assigned a value that is never used. [unreadVariable] pipeline = pipe_widget->private; ^ Signed-off-by:Chao Song <chao.song@intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/sof/ipc4-topology.c:334:64: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] type = fw_module->man4_module_entry.type & SOF_IPC4_MODULE_DP ? 1 : 0; ^ Signed-off-by: -
Rander Wang authored
If multiple pipeline are mixed into one, we can't unprepare the widget used by other pipelines. This patch checks use_count to address this case. Reviewed-by:
-
Rander Wang authored
Playback can't work after the first try sometimes. The reason is that some widgets don't have ipc_unprepare ops and driver will jump to sink_prepare so miss to set prepare state to false. Next time these widgets will not be prepared and it will result to error with different format of audio file since the last setting is not applicable. This patch makes sure that widget prepare state will be cleared to false when it is unprepared. Reviewed-by:
-
Pierre-Louis Bossart authored
Add ops and ops_init for SKL and KBL. Tested on Dell XPS-13-9350 and KBL NUC. Note: currently only SOF_IPC4_MTRACE_INTEL_CAVS_2 type is supported by the ipc4-mtrace driver, which is used by CAVS 2.x platforms (ICL, TGL, ADL) and ACE (MTL). Signed-off-by:
-
Pierre-Louis Bossart authored
In preparation of the IPCv4 IPC support, this patch adds support for SkyLake and KabyLake boot and descriptors used when probing the PCI driver. The work was initially contributed in 2018 by Liam Girdwood and Zhu Yingjiang, and abandoned due to firmware signature issues. With the upcoming support of IPC v4, and hence the Intel closed-source firmware, it's time to re-add this capability. The SKL ops will be added in the next patch. Tested with the IPC4 and closed-source firmware on Dell XPS 9350 and KBL NUC with HDaudio codecs. The SSP and DMIC interfaces are not supported at this time. Co-developed-by:
-
Pierre-Louis Bossart authored
This patch adds support for the SkyLake and KabyLake code loader on top of the SOF IPC4. The work was initially contributed in 2018 by Liam Girdwood and Zhu Yingjiang, and abandoned due to firmware signature issues. With the existing support of IPC v4, it's time to re-add this capability. This patch uses the newly added FSR (Firmware State Register) definitions for DSP state handling and targeting, ass well as new state definition for SKL which indicates that the firmware has been started (similar to FW_ENTERED on other platforms). Co-developed-by:
-
Pierre-Louis Bossart authored
In preparation of the IPCv4 IPC support, this patch adds exposes two functions required by the SKL/KBL boot and code loader. Co-developed-by:
-
Mark Brown authored
Merge series from Martin Povišer <povik+lin@cutebit.org>: there's a CS42L83 headphone jack codec found in Apple computers (in the recent 'Apple Silicon' ones as well as in earlier models, one example [1]). The part isn't publicly documented, but it appears almost identical to CS42L42, for which we have a driver in kernel. This series adapts the CS42L42 driver to the new part, and makes one change in anticipation of a machine driver for the Apple computers. Patch 1 adds new compatible to the cs42l42 schema. Patches 2 to 7 are taken from Richard's recent series [2] adding soundwire support to cs42l42. They are useful refactorings to build on in the later patches, and also this way our work doesn't diverge. (I fixed missing free_irq path in cs42l42_init, did s/Soundwire/SoundWire/ in changelogs, rebased.) Patch 8 exports some regmap-related symbols from cs42l42.c so they can be used to create cs42l83 regmap in cs42l83-i2c.c later. Patch 9 is the cs42l83 support proper. Patch 10 implements 'set_bclk_ratio' on the cs42l42 core. This will be called by the upcoming ASoC machine driver for 'Apple Silicon' Macs. (We have touched on this change to be made in earlier discussion, see [3] and replies.) Patch 11 brings cs42l42-i2c.c in sync with cs42l83-i2c.c on dev_err_probe() usage.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset solves a known issue with ES8336 platforms wrt MCLK selection. Most of the devices use the MCLK0 signal, but some devices do use the MCLK1 signal. The MCLK is defined in the topology, it would be a nightmare to generate more topology files just for one MCLK difference. With a minor extension to the intel-nhlt library, the MCLK information can be found by parsing the NHLT table, and we can override the mclk_id at boot time. The only known issues for this platform remain the detection of GPIO and microphone connections, currently only possible with manual quirks. Thanks to Eugene J. Markow for testing this patchset.
-
Pierre-Louis Bossart authored
The NHLT is already used to determine which SSP is connected to an audio codec, we can parse the SSP blob to get the mclk_id from NHLT. Signed-off-by:
-
