- 24 Apr, 2023 10 commits
-
-
Alex Deucher authored
Used to get the size and alignment requirements for the gfx shadow buffer for preemption. v2: use FW version check to determine whether to return a valid size here return an error if not supported (Alex) v3: drop GDS (Alex) v4: make amdgpu_gfx_shadow_info mandatory (Alex) Signed-off-by:Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
To provide IP specific shadow sizes. UMDs will use this to query the kernel driver for the size of the shadow buffers. v2: make callback return an int (Alex) v3: drop GDS (Alex) Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
Add UAPI to query the GFX shadow buffer requirements for preemption on GFX11. UMDs need to specify the shadow areas for preemption. v2: move into existing asic info query drop GDS as its use is determined by the UMD (Marek) v3: Update comments to note that alignment is base virtual alignment (Alex) Reviewed-by:Marek Olšák <marek.olsak@amd.com> Signed-off-by:
-
Alex Deucher authored
We need to reset the shadow state every time we submit an IB and there needs to be a COND_EXEC packet after the SET_Q_PREEMPTION_MODE packet for it to work properly, so we should emit both of these packets regardless of whether there is a job present or not. Reviewed-by:
-
Christian König authored
Add ring callback for gfx to update the CP firmware with the new shadow information before we process the IB. v2: add implementation for new packet (Alex) v3: add current FW version checks (Alex) v4: only initialize shadow on first use Only set IB_VMID when a valid shadow buffer is present (Alex) v5: Pass parameters rather than job to new ring callback (Alex) Reviewed-by: -
Christian König authored
Add support for submitting the shadow update packet when submitting an IB. Needed for MCBP on GFX11. v2: update API for CSA (Alex) v3: fix ordering; SET_Q_PREEMPTION_MODE most come before COND_EXEC Add missing check for AMDGPU_CHUNK_ID_CP_GFX_SHADOW in amdgpu_cs_pass1() Only initialize shadow on first use (Alex) v4: Pass parameters rather than job to new ring callback (Alex) v5: squash in change to call SET_Q_PREEMPTION_MODE/COND_EXEC before RELEASE_MEM to complete the UMDs use of the shadow (Alex) Reviewed-by: -
Alex Deucher authored
For GFX11, the UMD needs to allocate some shadow buffers to be used for preemption. The UMD allocates the buffers and passes the GPU virtual address to the kernel since the kernel will program the packet that specified these addresses as part of its IB submission frame. v2: UMD passes shadow init to tell kernel when to initialize the shadow Reviewed-by: -
Alex Deucher authored
Only set the supported flag if we have new enough CP FW. v2: update to the final firmware versions Acked-by:
-
Jack Xiao authored
The fences associated with mes queue have to be freed up during amdgpu_ring_fini. Signed-off-by:
Jack Xiao <Jack.Xiao@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Alex Deucher authored
Use this to determine if we support the new SET_Q_PREEMPTION_MODE packet. Signed-off-by:
-
- 21 Apr, 2023 30 commits
-
-
Hamza Mahfooz authored
Currently, on a handful of ASICs. We allow the framebuffer for a given plane to exist in either VRAM or GTT. However, if the plane's new framebuffer is in a different memory domain than it's previous framebuffer, flipping between them can cause the screen to flicker. So, to fix this, don't perform an immediate flip in the aforementioned case. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354Reviewed-by:
Roman Li <Roman.Li@amd.com> Fixes: 81d0bcf9 ("drm/amdgpu: make display pinning more flexible (v2)") Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Arnd Bergmann authored
The dmub_abm_set_ambient_level() function has no caller and can just be removed, the other ones have a declaration in the header file and just need to see the prototype: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_abm_lcd.c:122:14: error: no previous prototype for function 'dmub_abm_get_current_backlight' [-Werror,-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_abm_lcd.c:133:14: error: no previous prototype for function 'dmub_abm_get_target_backlight' [-Werror,-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_abm_lcd.c:144:6: error: no previous prototype for function 'dmub_abm_set_level' [-Werror,-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_abm_lcd.c:163:6: error: no previous prototype for function 'dmub_abm_set_ambient_level' [-Werror,-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_abm_lcd.c:183:6: error: no previous prototype for function 'dmub_abm_init_config' [-Werror,-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_abm_lcd.c:213:6: error: no previous prototype for function 'dmub_abm_set_pause' [-Werror,-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_abm_lcd.c:231:6: error: no previous prototype for function 'dmub_abm_set_pipe' [-Werror,-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_abm_lcd.c:251:6: error: no previous prototype for function 'dmub_abm_set_backlight_level' [-Werror,-Wmissing-prototypes] Fixes: b8fe5637 ("drm/amd/display: Refactor ABM feature") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Aric Cyr authored
This DC version brings along: - FW Release 0.0.162.0 - Enable FPO+Vactivate - Support for VESA SCR - Refactor DMUB commands - Fixes in secure display, modeset, memleak and more - Picked up missed patches in history Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
[Why&How] Add Enum and documenation related to FAMS (Firmware Assisted Memclk Switching) and CAB (Cache As Buffer) Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
hackyzh002 authored
The type of size is unsigned int, if size is 0x40000000, there will be an integer overflow, size will be zero after size *= sizeof(uint32_t), will cause uninitialized memory to be referenced later. Reviewed-by:
hackyzh002 <hackyzh002@gmail.com> Signed-off-by:
-
hackyzh002 authored
The type of size is unsigned, if size is 0x40000000, there will be an integer overflow, size will be zero after size *= sizeof(uint32_t), will cause uninitialized memory to be referenced later Reviewed-by:
-
Aurabindo Pillai authored
DCN31 supports FAMS, but this was not correctly set to the hardware setup sequence. This commit fixes this issue by setting the MCLK switch capability based on the feature capability retrieved from the DMUB. Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] The bit for flip addr is being set causing the determination for FAST vs MEDIUM to always return MEDIUM when plane info is provided as a surface update. This causes extreme stuttering for the typical atomic update path on Linux. [How] Don't use update_flags->raw for determining FAST vs MEDIUM. It's too fragile to changes like this. Explicitly specify the update type per update flag instead. It's not as clever as checking the bits itself but at least it's correct. Fixes: aa5fdb1a ("drm/amd/display: Explicitly specify update type per plane info change") Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
Zhongwei authored
[Why] disable_vbios_mode_if_required() will set dpms_off to false during boot when pixel clk dismatches with driver requires. This will cause extra backlight on and off if OS call 2 times setmode. [How] Set dpms_off to true to keep power_off and let OS control backlight by display's powerState. Reviewed-by:
Zhongwei <Zhongwei.Zhang@amd.com> Tested-by:
-
Po-Ting Chen authored
Base on PSRSU specification, every seletive update frame need to use two SDP to indicate the frame active range. So we occupy another GSP1 for PSRSU execution. Reviewed-by:
Po-Ting Chen <robin.chen@amd.com> Tested-by:
-
Igor Kravchenko authored
Add min_width, min_height fields to dc_plane_cap structure. Set values to 16x16 for discrete ASICs, and 64x64 for others. Reviewed-by:
Igor Kravchenko <Igor.Kravchenko@amd.com> Tested-by:
-
Meenakshikumar Somasundaram authored
[Why] Currently driver enables dmub outbox notification before oubox ISR is registered. During boot scenario, sometimes dmub issues hpd outbox message before driver registers ISR and those messages are missed. [How] Enable dmub outbox notification after outbox ISR is registered. Also, restructured outbox enable code to call from dm layer and renamed APIs. Reviewed-by:
Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by:
-
Krunoslav Kovac authored
Enable 3-planes MPO for DCN321 by reporting max_slave_planes in DC caps for each ASIC. Reviewed-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Tested-by:
-
Aurabindo Pillai authored
DCN30 is missing a check for the pixel format 444 when using 16bits before setting the flag that Viewport exceeds the surface. Reviewed-by:
-
Sherry Wang authored
[Why] DML calculation is different from HW formula. [How] Correct the bug to keep it same as HW formula. Reviewed-by:
Sherry Wang <Yao.Wang1@amd.com> Tested-by:
-
Dmytro Laktyushkin authored
Dst_y can become negative in extreme odm 4to1 cases. While not strictly invalid, this should be limited to 0 for rq/dlg/ttu calculation. Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by:
-
Jasdeep Dhillon authored
[Why] DCN32 resource contains code that uses FPU. [How] Moved code into DCN32 FPU Reviewed-by:
Jasdeep Dhillon <jasdeep.dhillon@amd.com> Tested-by:
-
Aurabindo Pillai authored
For pstate change, allow DML to loop through all possible prefetch combinations so as to support more display configurations. Set the max and min prefetch modes to enable the sequence. Reviewed-by:
-
Aurabindo Pillai authored
Set DRAM clock change state if retraining is required. Reviewed-by:
-
Dillon Varone authored
[WHY&HOW] Low bpc timings are failing validation, port a patch to allow them to pass. Signed-off-by:
Dillon Varone <dillon.varone@amd.com> Acked-by:
-
Srinivasan Shanmugam authored
Fix following checkpatch errors in amdgpu_discovery.c ERROR: space required after that ',' (ctx:VxV) ERROR: space required before the open parenthesis '(' ERROR: code indent should use tabs where possible Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
-
Aurabindo Pillai authored
[Why&how] Update bounding box values as per hardware spec Fixes: 197485c6 ("drm/amd/display: Create dcn321_fpu file") Acked-by:
-
Aurabindo Pillai authored
[Why & How] There's no need to clear GPINT register for DMUB when releasing it from reset. Fix that. Fixes: ac2e555e ("drm/amd/display: Add DMCUB source files and changes for DCN32/321") Reviewed-by:
-
Srinivasan Shanmugam authored
Fix the below compiler error: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_hwseq.c:229:11: error: unused variable 'otg_inst' [-Werror,-Wunused-variable] uint32_t otg_inst = pipe_ctx->stream_res.tg->inst; ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_hwseq.c:226:20: error: unused variable 'cmd' [-Werror,-Wunused-variable] union dmub_rb_cmd cmd; Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Jerry Zuo <jerry.zuo@amd.com> Cc: Yongqiang Sun <yongqiang.sun@amd.com> Signed-off-by:
Yongqiang Sun <Yongqiang.Sun@amd.com> Signed-off-by:
-
Le Ma authored
Allocate different doorbell index for kiq/kcq rings on each die Signed-off-by:
Le Ma <le.ma@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
Fix following checkpatch style errors in amdgpu_drv.c & amdgpu_device.c ERROR: exactly one space required after that #ifdef ERROR: spaces required around that '+=' (ctx:WxV) ERROR: space required before the open brace '{' ERROR: spaces required around that '||' (ctx:VxE) ERROR: space prohibited before that close parenthesis ')' ERROR: space required before the open parenthesis '(' ERROR: space required before the open brace '{' ERROR: code indent should use tabs where possible Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: -
Srinivasan Shanmugam authored
Fix the following errors reported by checkpatch: ERROR: space prohibited before open square bracket '[' +#define TA_FW_NAME(type) [TA_FW_TYPE_PSP_##type] = #type ERROR: code indent should use tabs where possible + query_fw.fw_type = AMDGPU_INFO_FW_GFX_RLCV;$ Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Candice Li authored
Some ASICs support fatal error event but do not support pcie_bif ras. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
-
Longlong Yao authored
The following call trace is observed when removing the amdgpu driver, which is caused by that BOs allocated for psp are not freed until removing. [61811.450562] RIP: 0010:amddrm_buddy_fini.cold+0x29/0x47 [amddrm_buddy] [61811.450577] Call Trace: [61811.450577] <TASK> [61811.450579] amdgpu_vram_mgr_fini+0x135/0x1c0 [amdgpu] [61811.450728] amdgpu_ttm_fini+0x207/0x290 [amdgpu] [61811.450870] amdgpu_bo_fini+0x27/0xa0 [amdgpu] [61811.451012] gmc_v9_0_sw_fini+0x4a/0x60 [amdgpu] [61811.451166] amdgpu_device_fini_sw+0x117/0x520 [amdgpu] [61811.451306] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] [61811.451447] devm_drm_dev_init_release+0x4d/0x80 [drm] [61811.451466] devm_action_release+0x15/0x20 [61811.451469] release_nodes+0x40/0xb0 [61811.451471] devres_release_all+0x9b/0xd0 [61811.451473] __device_release_driver+0x1bb/0x2a0 [61811.451476] driver_detach+0xf3/0x140 [61811.451479] bus_remove_driver+0x6c/0xf0 [61811.451481] driver_unregister+0x31/0x60 [61811.451483] pci_unregister_driver+0x40/0x90 [61811.451486] amdgpu_exit+0x15/0x447 [amdgpu] For smu v13_0_2, if the GPU supports xgmi, refer to commit f5c7e779 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2"), it will run gpu recover in AMDGPU_RESET_FOR_DEVICE_REMOVE mode when removing, which makes all devices in hive list have hw reset but no resume except the basic ip blocks, then other ip blocks will not call .hw_fini according to ip_block.status.hw. Since psp_free_shared_bufs just includes some software operations, so move it to psp_sw_fini. Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
Longlong Yao <Longlong.Yao@amd.com> Signed-off-by:
-
Cruise Hung authored
[Why & How] We missed resetting OUTBOX0 mailbox r/w pointer on DMUB reset. Fix it. Fixes: 6ecf9773 ("drm/amd/display: Fix DMUB outbox trace in S4 (#4465)") Signed-off-by:
Cruise Hung <Cruise.Hung@amd.com> Acked-by:
-
