Currently the MM selftests attempt to work out the target architecture by
using CROSS_COMPILE or otherwise querying the host machine, storing the
target architecture in a variable called MACHINE rather than the usual
ARCH though as far as I can tell (including for x86_64) the value is the
same as we would use for architecture.

When cross compiling with LLVM we don't need a CROSS_COMPILE as LLVM can
support many target architectures in a single build so this logic does not
work, CROSS_COMPILE is not set and we end up selecting tests for the host
rather than target architecture.  Fix this by using the more standard ARCH
to describe the architecture, taking it from the environment if specified.

Link: https://lkml.kernel.org/r/20230614-kselftest-mm-llvm-v1-1-180523f277d3@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

I am going to be losing my sifive.com address soon and I also realised my
old Simtec address (from >10 years ago) is also not been updates so update
.mailmap for both.

Link: https://lkml.kernel.org/r/20230615081820.79485-1-ben.dooks@codethink.co.ukSigned-off-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

In a syzbot stress test that deliberately causes file system errors on
nilfs2 with a corrupted disk image, it has been reported that
nilfs_clear_dirty_page() called from nilfs_clear_dirty_pages() can cause a
general protection fault.

In nilfs_clear_dirty_pages(), when looking up dirty pages from the page
cache and calling nilfs_clear_dirty_page() for each dirty page/folio
retrieved, the back reference from the argument page to "mapping" may have
been changed to NULL (and possibly others).  It is necessary to check this
after locking the page/folio.

So, fix this issue by not calling nilfs_clear_dirty_page() on a page/folio
after locking it in nilfs_clear_dirty_pages() if the back reference
"mapping" from the page/folio is different from the "mapping" that held
the page/folio just before.

Link: https://lkml.kernel.org/r/20230612021456.3682-1-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+53369d11851d8f26735c@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000da4f6b05eb9bf593@google.comTested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit f95bdb70.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless").  The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly.  That's why
unregister_shrinker() has become slower.

After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink.  So
revert the shrinker_srcu related changes first.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-8-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit caa05325.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless").  The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly.  That's why
unregister_shrinker() has become slower.

After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink.  So
revert the shrinker_srcu related changes first.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-7-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit 475733dd.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless").  The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly.  That's why
unregister_shrinker() has become slower.

We will try to use the refcount+RCU method [2] proposed by Dave Chinner to
continue to re-implement the lockless slab shrink.  So revert the
shrinker_srcu related changes first.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-6-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit 20cd1892.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless").  The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly.  That's why
unregister_shrinker() has become slower.

We will try to use the refcount+RCU method [2] proposed by Dave Chinner to
continue to re-implement the lockless slab shrink.  So revert the
shrinker_srcu related changes first.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-5-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit b3cabea3.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be careful
to not frequently check for SRCU read-side critical section exits. Therefore,
even if no one is currently in the SRCU read-side critical section,
synchronize_srcu() cannot return quickly. That's why unregister_shrinker()
has become slower.

We will try to use the refcount+RCU method [2] proposed by Dave Chinner
to continue to re-implement the lockless slab shrink. Because there will
be other readers after reverting the shrinker_srcu related changes, so
it is better to restore to hold read lock to reparent shrinker nr_deferred.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-4-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit 1643db98.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless").  The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly.  That's why
unregister_shrinker() has become slower.

We will try to use the refcount+RCU method [2] proposed by Dave Chinner to
continue to re-implement the lockless slab shrink.  So we still need
shrinker_rwsem in synchronize_shrinkers() after reverting the
shrinker_srcu related changes.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-3-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "revert shrinker_srcu related changes".


This patch (of 7):

This reverts commit cf2e309e.

Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb70 ("mm: vmscan: make
global slab shrink lockless").  The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly.  That's why
unregister_shrinker() has become slower.

After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink.  So
revert the shrinker_mutex back to shrinker_rwsem first.

[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/

Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev
Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.devReported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

As a result of analysis of a syzbot report, it turned out that in three
cases where nilfs2 allocates block device buffers directly via sb_getblk,
concurrent reads to the device can corrupt the allocated buffers.

Nilfs2 uses sb_getblk for segment summary blocks, that make up a log
header, and the super root block, that is the trailer, and when moving and
writing the second super block after fs resize.

In any of these, since the uptodate flag is not set when storing metadata
to be written in the allocated buffers, the stored metadata will be
overwritten if a device read of the same block occurs concurrently before
the write.  This causes metadata corruption and misbehavior in the log
write itself, causing warnings in nilfs_btree_assign() as reported.

Fix these issues by setting an uptodate flag on the buffer head on the
first or before modifying each buffer obtained with sb_getblk, and
clearing the flag on failure.

When setting the uptodate flag, the lock_buffer/unlock_buffer pair is used
to perform necessary exclusive control, and the buffer is filled to ensure
that uninitialized bytes are not mixed into the data read from others.  As
for buffers for segment summary blocks, they are filled incrementally, so
if the uptodate flag was unset on their allocation, set the flag and zero
fill the buffer once at that point.

Also, regarding the superblock move routine, the starting point of the
memset call to zerofill the block is incorrectly specified, which can
cause a buffer overflow on file systems with block sizes greater than
4KiB.  In addition, if the superblock is moved within a large block, it is
necessary to assume the possibility that the data in the superblock will
be destroyed by zero-filling before copying.  So fix these potential
issues as well.

Link: https://lkml.kernel.org/r/20230609035732.20426-1-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+31837fe952932efc8fb9@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000030000a05e981f475@google.comTested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

--0000000000009a0c9905fd9173ad
Content-Transfer-Encoding: 8bit

After f15afbd3 ("fs: fix undefined behavior in bit shift for
SB_NOUSER") the constants were changed from plain integers which
LX_VALUE() can parse to constants using the BIT() macro which causes the
following:

Reading symbols from build/linux-custom/vmlinux...done.
Traceback (most recent call last):
  File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/vmlinux-gdb.py", line 25, in <module>
    import linux.constants
  File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/scripts/gdb/linux/constants.py", line 5
    LX_SB_RDONLY = ((((1UL))) << (0))

Use LX_GDBPARSED() which does not suffer from that issue.

f15afbd3 ("fs: fix undefined behavior in bit shift for SB_NOUSER")
Link: https://lkml.kernel.org/r/20230607221337.2781730-1-florian.fainelli@broadcom.comSigned-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Cc: Hao Ge <gehao@kylinos.cn>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Since gfp flags have been shifted to gfp_types.h so update the path in
the gfp-translate script.

Link: https://lkml.kernel.org/r/20230608154450.21758-1-prathubaronia2011@gmail.com
Fixes: cb5a065b ("headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>")
Signed-off-by: Prathu Baronia <prathubaronia2011@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This effectively reverts commit 16c243e9 ("udmabuf: Add support for
mapping hugepages (v4)").  Recently, Junxiao Chang found a BUG with page
map counting as described here [1].  This issue pointed out that the
udmabuf driver was making direct use of subpages of hugetlb pages.  This
is not a good idea, and no other mm code attempts such use.  In addition
to the mapcount issue, this also causes issues with hugetlb vmemmap
optimization and page poisoning.

For now, remove hugetlb support.

If udmabuf wants to be used on hugetlb mappings, it should be changed to
only use complete hugetlb pages.  This will require different alignment
and size requirements on the UDMABUF_CREATE API.

[1] https://lore.kernel.org/linux-mm/20230512072036.1027784-1-junxiao.chang@intel.com/

Link: https://lkml.kernel.org/r/20230608204927.88711-1-mike.kravetz@oracle.com
Fixes: 16c243e9 ("udmabuf: Add support for mapping hugepages (v4)")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Junxiao Chang <junxiao.chang@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Remove an unnecessary call to xas_set(index) when iterating over the
target range in collapse_file.  The extra call to xas_set reset the xas
cursor to the top of the tree, causing the xas_next call on the next
iteration to walk the tree to index instead of advancing to index+1.  This
returned the same page again, which would cause collapse_file to fail
because the page is already locked.

This bug was hidden when CONFIG_DEBUG_VM was set.  When that config was
used, the xas_load in a subsequent VM_BUG_ON assert would walk xas from
the top of the tree to index, causing the xas_next call on the next loop
iteration to advance the cursor as expected.

Link: https://lkml.kernel.org/r/20230607053135.2087354-1-stevensd@google.com
Fixes: a2e17cc2 ("mm/khugepaged: maintain page cache uptodate flag")
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Ensure that file_seals is non-NULL before using it in the memfd_create()
syscall.  One situation in which memfd_file_seals_ptr() could return a
NULL pointer when CONFIG_SHMEM=n, oopsing the kernel.

Link: https://lkml.kernel.org/r/20230607132427.2867435-1-roberto.sassu@huaweicloud.com
Fixes: 47b9012e ("shmem: add sealing support to hugetlb-backed memfd")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

In __vmalloc_area_node() we always warn_alloc() when an allocation
performed by vm_area_alloc_pages() fails unless it was due to a pending
fatal signal.

However, huge page allocations instigated either by vmalloc_huge() or
__vmalloc_node_range() (or a caller that invokes this like kvmalloc() or
kvmalloc_node()) always falls back to order-0 allocations if the huge page
allocation fails.

This renders the warning useless and noisy, especially as all callers
appear to be aware that this may fallback.  This has already resulted in
at least one bug report from a user who was confused by this (see link).

Therefore, simply update the code to only output this warning for order-0
pages when no fatal signal is pending.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1211410
Link: https://lkml.kernel.org/r/20230605201107.83298-1-lstoakes@gmail.com
Fixes: 80b1d8fd ("mm: vmalloc: correct use of __GFP_NOWARN mask in __vmalloc_area_node()")
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The return of do_mprotect_pkey() can still be incorrectly returned as
success if there is a gap that spans to or beyond the end address passed
in.  Update the check to ensure that the end address has indeed been seen.

Link: https://lore.kernel.org/all/CABi2SkXjN+5iFoBhxk71t3cmunTk-s=rB4T7qo0UQRh17s49PQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230606182912.586576-1-Liam.Howlett@oracle.com
Fixes: 82f95134 ("mm/mprotect: fix do_mprotect_pkey() return on error")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When commit 19343b5b ("mm/page-writeback: introduce tracepoint for
wait_on_page_writeback()") repurposed the writeback_dirty_page trace event
as a template to create its new wait_on_page_writeback trace event, it
ended up opening a window to NULL pointer dereference crashes due to the
(infrequent) occurrence of a race where an access to a page in the
swap-cache happens concurrently with the moment this page is being written
to disk and the tracepoint is enabled:

    BUG: kernel NULL pointer dereference, address: 0000000000000040
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    PGD 800000010ec0a067 P4D 800000010ec0a067 PUD 102353067 PMD 0
    Oops: 0000 [#1] PREEMPT SMP PTI
    CPU: 1 PID: 1320 Comm: shmem-worker Kdump: loaded Not tainted 6.4.0-rc5+ #13
    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230301gitf80f052277c8-1.fc37 03/01/2023
    RIP: 0010:trace_event_raw_event_writeback_folio_template+0x76/0xf0
    Code: 4d 85 e4 74 5c 49 8b 3c 24 e8 06 98 ee ff 48 89 c7 e8 9e 8b ee ff ba 20 00 00 00 48 89 ef 48 89 c6 e8 fe d4 1a 00 49 8b 04 24 <48> 8b 40 40 48 89 43 28 49 8b 45 20 48 89 e7 48 89 43 30 e8 a2 4d
    RSP: 0000:ffffaad580b6fb60 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: ffff90e38035c01c RCX: 0000000000000000
    RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff90e38035c044
    RBP: ffff90e38035c024 R08: 0000000000000002 R09: 0000000000000006
    R10: ffff90e38035c02e R11: 0000000000000020 R12: ffff90e380bac000
    R13: ffffe3a7456d9200 R14: 0000000000001b81 R15: ffffe3a7456d9200
    FS:  00007f2e4e8a15c0(0000) GS:ffff90e3fbc80000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000040 CR3: 00000001150c6003 CR4: 0000000000170ee0
    Call Trace:
     <TASK>
     ? __die+0x20/0x70
     ? page_fault_oops+0x76/0x170
     ? kernelmode_fixup_or_oops+0x84/0x110
     ? exc_page_fault+0x65/0x150
     ? asm_exc_page_fault+0x22/0x30
     ? trace_event_raw_event_writeback_folio_template+0x76/0xf0
     folio_wait_writeback+0x6b/0x80
     shmem_swapin_folio+0x24a/0x500
     ? filemap_get_entry+0xe3/0x140
     shmem_get_folio_gfp+0x36e/0x7c0
     ? find_busiest_group+0x43/0x1a0
     shmem_fault+0x76/0x2a0
     ? __update_load_avg_cfs_rq+0x281/0x2f0
     __do_fault+0x33/0x130
     do_read_fault+0x118/0x160
     do_pte_missing+0x1ed/0x2a0
     __handle_mm_fault+0x566/0x630
     handle_mm_fault+0x91/0x210
     do_user_addr_fault+0x22c/0x740
     exc_page_fault+0x65/0x150
     asm_exc_page_fault+0x22/0x30

This problem arises from the fact that the repurposed writeback_dirty_page
trace event code was written assuming that every pointer to mapping
(struct address_space) would come from a file-mapped page-cache object,
thus mapping->host would always be populated, and that was a valid case
before commit 19343b5b.  The swap-cache address space
(swapper_spaces), however, doesn't populate its ->host (struct inode)
pointer, thus leading to the crashes in the corner-case aforementioned.

commit 19343b5b ended up breaking the assignment of __entry->name and
__entry->ino for the wait_on_page_writeback tracepoint -- both dependent
on mapping->host carrying a pointer to a valid inode.  The assignment of
__entry->name was fixed by commit 68f23b89 ("memcg: fix a crash in
wb_workfn when a device disappears"), and this commit fixes the remaining
case, for __entry->ino.

Link: https://lkml.kernel.org/r/20230606233613.1290819-1-aquini@redhat.com
Fixes: 19343b5b ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()")
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Before storing a page, zswap first checks if the number of stored pages
exceeds the limit specified by memory.zswap.max, for each cgroup in the
hierarchy.  If this limit is reached or exceeded, then zswap shrinking is
triggered and short-circuits the store attempt.

However, since the zswap's LRU is not memcg-aware, this can create the
following pathological behavior: the cgroup whose zswap limit is 0 will
evict pages from other cgroups continually, without lowering its own zswap
usage.  This means the shrinking will continue until the need for swap
ceases or the pool becomes empty.

As a result of this, we observe a disproportionate amount of zswap
writeback and a perpetually small zswap pool in our experiments, even
though the pool limit is never hit.

More generally, a cgroup might unnecessarily evict pages from other
cgroups before we drive the memcg back below its limit.

This patch fixes the issue by rejecting zswap store attempt without
shrinking the pool when obj_cgroup_may_zswap() returns false.

[akpm@linux-foundation.org: fix return of unintialized value]
[akpm@linux-foundation.org: s/ENOSPC/ENOMEM/]
Link: https://lkml.kernel.org/r/20230530222440.2777700-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230530232435.3097106-1-nphamcs@gmail.com
Fixes: f4840ccf ("zswap: memcg accounting")
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Ackerley Tng reported an issue with hugetlbfs fallocate here[1].  The
issue showed up after the conversion of hugetlb page cache lookup code to
use page_cache_next_miss.  Code in hugetlb fallocate, userfaultfd and GUP
is now using page_cache_next_miss to determine if a page is present the
page cache.  The following statement is used.

	present = page_cache_next_miss(mapping, index, 1) != index;

There are two issues with page_cache_next_miss when used in this way.
1) If the passed value for index is equal to the 'wrap-around' value,
   the same index will always be returned.  This wrap-around value is 0,
   so 0 will be returned even if page is present at index 0.
2) If there is no gap in the range passed, the last index in the range
   will be returned.  When passed a range of 1 as above, the passed
   index value will be returned even if the page is present.
The end result is the statement above will NEVER indicate a page is
present in the cache, even if it is.

As noted by Ackerley in [1], users can see this by hugetlb fallocate
incorrectly returning EEXIST if pages are already present in the file.  In
addition, hugetlb pages will not be included in core dumps if they need to
be brought in via GUP.  userfaultfd UFFDIO_COPY also uses this code and
will not notice pages already present in the cache.  It may try to
allocate a new page and potentially return ENOMEM as opposed to EEXIST.

Both page_cache_next_miss and page_cache_prev_miss have similar issues.
Fix by:
- Check for index equal to 'wrap-around' value and do not exit early.
- If no gap is found in range, return index outside range.
- Update function description to say 'wrap-around' value could be
  returned if passed as index.

[1] https://lore.kernel.org/linux-mm/cover.1683069252.git.ackerleytng@google.com/

Link: https://lkml.kernel.org/r/20230602225747.103865-2-mike.kravetz@oracle.com
Fixes: d0ce0e47 ("mm/hugetlb: convert hugetlb fault paths to use alloc_hugetlb_folio()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When changing a file size with fallocate() the new size isn't being
checked.  In particular, the FSIZE ulimit isn't being checked, which makes
fstest generic/228 fail.  Simply adding a call to inode_newsize_ok() fixes
this issue.

Link: https://lkml.kernel.org/r/20230529152645.32680-1-lhenriques@suse.deSigned-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Mark Fasheh <mark@fasheh.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Map my corporate address to my personal one, as I am leaving the
company.

Link: https://lkml.kernel.org/r/20230531144839.1157112-1-john@keeping.me.ukSigned-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If 'aggr_interval' is smaller than 'sample_interval', max_nr_accesses in
damon_nr_accesses_to_accesses_bp() becomes zero which leads to divide
error, let's validate the values of them in damon_set_attrs() to fix it,
which similar to others attrs check.

Link: https://lkml.kernel.org/r/20230527032101.167788-1-wangkefeng.wang@huawei.com
Fixes: 2f5bef5a ("mm/damon/core: update monitoring results for new monitoring attributes")
Reported-by: syzbot+841a46899768ec7bec67@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=841a46899768ec7bec67
Link: https://lore.kernel.org/damon/00000000000055fc4e05fc975bc2@google.com/Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

autoremove_wake_function uses list_del_init_careful, so should epoll's
more aggressive variant.  It only doesn't because it was copied from an
older wait.c rather than the most recent.

[bsegall@google.com: add comment]
  Link: https://lkml.kernel.org/r/xm26bki0ulsr.fsf_-_@google.com
Link: https://lkml.kernel.org/r/xm26pm6hvfer.fsf@google.com
Fixes: a16ceb13 ("epoll: autoremove wakers even more aggressively")
Signed-off-by: Ben Segall <bsegall@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When tools/testing/selftests/mm/gup_test.c is compiled as 32bit, then run
on arm64 kernel, it reports "ioctl: Inappropriate ioctl for device".

Fix it by filling compat_ioctl in gup_test_fops

Link: https://lkml.kernel.org/r/20230526022125.175728-1-haibo.li@mediatek.comSigned-off-by: Haibo Li <haibo.li@mediatek.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The current sanity check for nilfs2 geometry information lacks checks for
the number of segments stored in superblocks, so even for device images
that have been destructively truncated or have an unusually high number of
segments, the mount operation may succeed.

This causes out-of-bounds block I/O on file system block reads or log
writes to the segments, the latter in particular causing
"a_ops->writepages" to repeatedly fail, resulting in sync_inodes_sb() to
hang.

Fix this issue by checking the number of segments stored in the superblock
and avoiding mounting devices that can cause out-of-bounds accesses.  To
eliminate the possibility of overflow when calculating the number of
blocks required for the device from the number of segments, this also adds
a helper function to calculate the upper bound on the number of segments
and inserts a check using it.

Link: https://lkml.kernel.org/r/20230526021332.3431-1-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+7d50f1e54a12ba3aeae2@syzkaller.appspotmail.com
  Link: https://syzkaller.appspot.com/bug?extid=7d50f1e54a12ba3aeae2Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

It's trivial to trigger a use-after-free bug in the ocfs2 quotas code using
fstest generic/452.  After a read-only remount, quotas are suspended and
ocfs2_mem_dqinfo is freed through ->ocfs2_local_free_info().  When unmounting
the filesystem, an UAF access to the oinfo will eventually cause a crash.
 
BUG: KASAN: slab-use-after-free in timer_delete+0x54/0xc0
Read of size 8 at addr ffff8880389a8208 by task umount/669
...
Call Trace:
 <TASK>
 ...
 timer_delete+0x54/0xc0
 try_to_grab_pending+0x31/0x230
 __cancel_work_timer+0x6c/0x270
 ocfs2_disable_quotas.isra.0+0x3e/0xf0 [ocfs2]
 ocfs2_dismount_volume+0xdd/0x450 [ocfs2]
 generic_shutdown_super+0xaa/0x280
 kill_block_super+0x46/0x70
 deactivate_locked_super+0x4d/0xb0
 cleanup_mnt+0x135/0x1f0
 ...
 </TASK>

Allocated by task 632:
 kasan_save_stack+0x1c/0x40
 kasan_set_track+0x21/0x30
 __kasan_kmalloc+0x8b/0x90
 ocfs2_local_read_info+0xe3/0x9a0 [ocfs2]
 dquot_load_quota_sb+0x34b/0x680
 dquot_load_quota_inode+0xfe/0x1a0
 ocfs2_enable_quotas+0x190/0x2f0 [ocfs2]
 ocfs2_fill_super+0x14ef/0x2120 [ocfs2]
 mount_bdev+0x1be/0x200
 legacy_get_tree+0x6c/0xb0
 vfs_get_tree+0x3e/0x110
 path_mount+0xa90/0xe10
 __x64_sys_mount+0x16f/0x1a0
 do_syscall_64+0x43/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

Freed by task 650:
 kasan_save_stack+0x1c/0x40
 kasan_set_track+0x21/0x30
 kasan_save_free_info+0x2a/0x50
 __kasan_slab_free+0xf9/0x150
 __kmem_cache_free+0x89/0x180
 ocfs2_local_free_info+0x2ba/0x3f0 [ocfs2]
 dquot_disable+0x35f/0xa70
 ocfs2_susp_quotas.isra.0+0x159/0x1a0 [ocfs2]
 ocfs2_remount+0x150/0x580 [ocfs2]
 reconfigure_super+0x1a5/0x3a0
 path_mount+0xc8a/0xe10
 __x64_sys_mount+0x16f/0x1a0
 do_syscall_64+0x43/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

Link: https://lkml.kernel.org/r/20230522102112.9031-1-lhenriques@suse.deSigned-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

It turns out that alloc_pages_bulk_array() does not treat the page_array
parameter as an output parameter, but rather reads the array and skips any
entries that have already been allocated.

This is somewhat unexpected and breaks this test, as we allocate the pages
array uninitialised on the assumption it will be overwritten.

As a result, the test was referencing uninitialised data and causing the
PFN to not be valid and thus a WARN_ON() followed by a null pointer deref
and panic.

In addition, this is an array of pointers not of struct page objects, so we
need only allocate an array with elements of pointer size.

We solve both problems by simply using kcalloc() and referencing
sizeof(struct page *) rather than sizeof(struct page).

Link: https://lkml.kernel.org/r/20230524082424.10022-1-lstoakes@gmail.com
Fixes: 869cb29a ("lib/test_vmalloc.c: add vm_map_ram()/vm_unmap_ram() test case")
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Syzbot reports that in its stress test for resize ioctl, the log writing
function nilfs_segctor_do_construct hits a WARN_ON in
nilfs_segctor_truncate_segments().

It turned out that there is a problem with the current implementation of
the resize ioctl, which changes the writable range on the device (the
range of allocatable segments) at the end of the resize process.

This order is necessary for file system expansion to avoid corrupting the
superblock at trailing edge.  However, in the case of a file system
shrink, if log writes occur after truncating out-of-bounds trailing
segments and before the resize is complete, segments may be allocated from
the truncated space.

The userspace resize tool was fine as it limits the range of allocatable
segments before performing the resize, but it can run into this issue if
the resize ioctl is called alone.

Fix this issue by changing nilfs_sufile_resize() to update the range of
allocatable segments immediately after successful truncation of segment
space in case of file system shrink.

Link: https://lkml.kernel.org/r/20230524094348.3784-1-konishi.ryusuke@gmail.com
Fixes: 4e33f9ea ("nilfs2: implement resize ioctl")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+33494cd0df2ec2931851@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000005434c405fbbafdc5@google.comTested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections.  This is not supported by kexec and crashes the
system.

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-4-b05c520b7296@chromium.org
Fixes: 93045705 ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections.  This is not supported by kexec and crashes the
system.

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-3-b05c520b7296@chromium.org
Fixes: 93045705 ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections.  This is not supported by kexec and crashes the
system.

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-2-b05c520b7296@chromium.org
Fixes: 93045705 ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "kexec: Fix kexec_file_load for llvm16 with PGO", v7.

When upreving llvm I realised that kexec stopped working on my test
platform.

The reason seems to be that due to PGO there are multiple .text sections
on the purgatory, and kexec does not supports that.


This patch (of 4):

Clang16 links the purgatory text in two sections when PGO is in use:

  [ 1] .text             PROGBITS         0000000000000000  00000040
       00000000000011a1  0000000000000000  AX       0     0     16
  [ 2] .rela.text        RELA             0000000000000000  00003498
       0000000000000648  0000000000000018   I      24     1     8
  ...
  [17] .text.hot.        PROGBITS         0000000000000000  00003220
       000000000000020b  0000000000000000  AX       0     0     1
  [18] .rela.text.hot.   RELA             0000000000000000  00004428
       0000000000000078  0000000000000018   I      24    17     8

And both of them have their range [sh_addr ... sh_addr+sh_size] on the
area pointed by `e_entry`.

This causes that image->start is calculated twice, once for .text and
another time for .text.hot. The second calculation leaves image->start
in a random location.

Because of this, the system crashes immediately after:

kexec_core: Starting new kernel

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-0-b05c520b7296@chromium.org
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-1-b05c520b7296@chromium.org
Fixes: 93045705 ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

We used to not pass in the pgoff correctly when register/unregister uffd
regions, it caused incorrect behavior on vma merging and can cause
mergeable vmas being separate after ioctls return.

For example, when we have:

  vma1(range 0-9, with uffd), vma2(range 10-19, no uffd)

Then someone unregisters uffd on range (5-9), it should logically become:

  vma1(range 0-4, with uffd), vma2(range 5-19, no uffd)

But with current code we'll have:

  vma1(range 0-4, with uffd), vma3(range 5-9, no uffd), vma2(range 10-19, no uffd)

This patch allows such merge to happen correctly before ioctl returns.

This behavior seems to have existed since the 1st day of uffd.  Since
pgoff for vma_merge() is only used to identify the possibility of vma
merging, meanwhile here what we did was always passing in a pgoff smaller
than what we should, so there should have no other side effect besides not
merging it.  Let's still tentatively copy stable for this, even though I
don't see anything will go wrong besides vma being split (which is mostly
not user visible).

Link: https://lkml.kernel.org/r/20230517190916.3429499-3-peterx@redhat.com
Fixes: 86039bd3 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "mm/uffd: Fix vma merge/split", v2.

This series contains two patches that fix vma merge/split for userfaultfd
on two separate issues.

Patch 1 fixes a regression since 6.1+ due to something we overlooked when
converting to maple tree apis.  The plan is we use patch 1 to replace the
commit "2f628010799e (mm: userfaultfd: avoid passing an invalid range to
vma_merge())" in mm-hostfixes-unstable tree if possible, so as to bring
uffd vma operations back aligned with the rest code again.

Patch 2 fixes a long standing issue that vma can be left unmerged even if
we can for either uffd register or unregister.

Many thanks to Lorenzo on either noticing this issue from the assert
movement patch, looking at this problem, and also provided a reproducer on
the unmerged vma issue [1].

[1] https://gist.github.com/lorenzo-stoakes/a11a10f5f479e7a977fc456331266e0e


This patch (of 2):

It seems vma merging with uffd paths is broken with either
register/unregister, where right now we can feed wrong parameters to
vma_merge() and it's found by recent patch which moved asserts upwards in
vma_merge() by Lorenzo Stoakes:

https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/

It's possible that "start" is contained within vma but not clamped to its
start.  We need to convert this into either "cannot merge" case or "can
merge" case 4 which permits subdivision of prev by assigning vma to prev. 
As we loop, each subsequent VMA will be clamped to the start.

This patch will eliminate the report and make sure vma_merge() calls will
become legal again.

One thing to mention is that the "Fixes: 29417d29" below is there only
to help explain where the warning can start to trigger, the real commit to
fix should be 69dbe6da.  Commit 29417d29 helps us to identify the
issue, but unfortunately we may want to keep it in Fixes too just to ease
kernel backporters for easier tracking.

Link: https://lkml.kernel.org/r/20230517190916.3429499-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230517190916.3429499-2-peterx@redhat.com
Fixes: 69dbe6da ("userfaultfd: use maple tree iterator to iterate VMAs")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Closes: https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The xarray.c file contains the only call to radix_tree_node_rcu_free(),
and it comes with its own extern declaration for it.  This means the
function definition causes a missing-prototype warning:

lib/radix-tree.c:288:6: error: no previous prototype for 'radix_tree_node_rcu_free' [-Werror=missing-prototypes]

Instead, move the declaration for this function to a new header that can
be included by both, and do the same for the radix_tree_node_cachep
variable that has the same underlying problem but does not cause a warning
with gcc.

[zhangpeng.00@bytedance.com: fix building radix tree test suite]
  Link: https://lkml.kernel.org/r/20230521095450.21332-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230516194212.548910-1-arnd@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

A syzbot fault injection test reported that nilfs_btnode_create_block, a
helper function that allocates a new node block for b-trees, causes a
kernel BUG for disk images where the file system block size is smaller
than the page size.

This was due to unexpected flags on the newly allocated buffer head, and
it turned out to be because the buffer flags were not cleared by
nilfs_btnode_abort_change_key() after an error occurred during a b-tree
update operation and the buffer was later reused in that state.

Fix this issue by using nilfs_btnode_delete() to abandon the unused
preallocated buffer in nilfs_btnode_abort_change_key().

Link: https://lkml.kernel.org/r/20230513102428.10223-1-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b0a35a5c1f7e846d3b09@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000d1d6c205ebc4d512@google.comTested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull tracing fixes from Steven Rostedt:
 "User events:

   - Use long instead of int for storing the enable set/clear bit, as it
     was found that big endian machines could end up using the wrong
     bits.

   - Split allocating mm and attaching it. This keeps the allocation
     separate from the registration and avoids various races.

   - Remove RCU locking around pin_user_pages_remote() as that can
     schedule. The RCU protection is no longer needed with the above
     split of mm allocation and attaching.

   - Rename the "link" fields of the various structs to something more
     meaningful.

   - Add comments around user_event_mm struct usage and locking
     requirements.

  Timerlat tracer:

   - Fix missed wakeup of timerlat thread caused by the timerlat
     interrupt triggering when tracing is off. The timer interrupt
     handler needs to always wake up the timerlat thread regardless if
     tracing is enabled or not, otherwise, it will never wake up.

  Histograms:

   - Fix regression of breaking the "stacktrace" modifier for variables.
     That modifier cannot be used for values, but can be used for
     variables that are passed from one histogram to the next. This was
     broken when adding the restriction to values as the variable logic
     used the same code.

   - Rename the special field "stacktrace" to "common_stacktrace".

     Special fields (that are not actually part of the event, but can
     act just like event fields, like 'comm' and 'timestamp') should be
     prefixed with 'common_' for consistency. To keep backward
     compatibility, 'stacktrace' can still be used (as with the special
     field 'cpu'), but can be overridden if the event has a field called
     'stacktrace'.

   - Update the synthetic event selftests to use the new name (synthetic
     events are created by histograms)

  Tracing bootup selftests:

   - Reorganize the code to keep artifacts of the selftests not compiled
     in when selftests are not configured.

   - Add various cond_resched() around the selftest code, as the
     softlock watchdog was triggering much more often. It appears that
     the kernel runs slower now with full debugging enabled.

   - While debugging ftrace with ftrace (using an instance ring buffer
     instead of the top level one), I found that the selftests were
     disabling prints to the debug instance.

     This should not happen, as the selftests only disable printing to
     the main buffer as the selftests examine the main buffer to see if
     it has what it expects, and prints can make the tests fail.

     Make the selftests only disable printing to the toplevel buffer,
     and leave the instance buffers alone"

* tag 'trace-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Have function_graph selftest call cond_resched()
  tracing: Only make selftest conditionals affect the global_trace
  tracing: Make tracing_selftest_running/delete nops when not used
  tracing: Have tracer selftests call cond_resched() before running
  tracing: Move setting of tracing_selftest_running out of register_tracer()
  tracing/selftests: Update synthetic event selftest to use common_stacktrace
  tracing: Rename stacktrace field to common_stacktrace
  tracing/histograms: Allow variables to have some modifiers
  tracing/user_events: Document user_event_mm one-shot list usage
  tracing/user_events: Rename link fields for clarity
  tracing/user_events: Remove RCU lock while pinning pages
  tracing/user_events: Split up mm alloc and attach
  tracing/timerlat: Always wakeup the timerlat thread
  tracing/user_events: Use long vs int for atomic bit ops

Pull crypto fix from Herbert Xu:
 "Fix an alignment crash in x86/aria"

* tag 'v6.4-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/aria - Use 16 byte alignment for GFNI constant vectors